Skip to contentSkip to conversation

x86: Use KERN_DEFAULT log-level in __show_regs()

RFC/PATCH Pekka Enberg 2 participants 5 messages Dec 28, 2009 – Dec 29, 2009 1 message not in the archive x86

lore
Share & tools
lore
#0 lore raw

From: Pekka Enberg <[email protected]>

Andrew Morton reported a strange looking kmemcheck warning:

WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20) 0000000000000000310000000000000000000000000000002413000000c9ffff
u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The problem here is that the output comes from syslog which doesn't show KERN_INFO log-level messages. We didn't see this before because both of us were testing on 32-bit kernels which use the _default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for __show_regs() printks.

Cc Vegard Nossum <[email protected]>
Cc Andrew Morton <[email protected]>
---
 arch/x86/kernel/process.c    |    4 ++--
 arch/x86/kernel/process_32.c |   14 +++++++-------
 arch/x86/kernel/process_64.c |   24 ++++++++++++------------
 3 files changed, 21 insertions(+), 21 deletions(-)
arch/x86/kernel/process.c +2 -2
index 98c2cde..c6ee241 100644
@@ -103,8 +103,8 @@ void show_regs_common(void)
 	if (!product)
 		product = "";
 
-	printk("\n");
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+	printk(KERN_CONT "\n");
+	printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
 		current->pid, current->comm, print_tainted(),
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
arch/x86/kernel/process_32.c +7 -7
index 9c517b5..37ad1e0 100644
@@ -139,16 +139,16 @@ void __show_regs(struct pt_regs *regs, int all)
 
 	show_regs_common();
 
-	printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
+	printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
 			(u16)regs->cs, regs->ip, regs->flags,
 			smp_processor_id());
 	print_symbol("EIP is at %s\n", regs->ip);
 
-	printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+	printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
 		regs->ax, regs->bx, regs->cx, regs->dx);
-	printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+	printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
 		regs->si, regs->di, regs->bp, sp);
-	printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+	printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
 	       (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
 
 	if (!all)
@@ -158,19 +158,19 @@ void __show_regs(struct pt_regs *regs, int all)
 	cr2 = read_cr2();
 	cr3 = read_cr3();
 	cr4 = read_cr4_safe();
-	printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+	printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
 			cr0, cr2, cr3, cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
 	get_debugreg(d2, 2);
 	get_debugreg(d3, 3);
-	printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+	printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
 			d0, d1, d2, d3);
 
 	get_debugreg(d6, 6);
 	get_debugreg(d7, 7);
-	printk("DR6: %08lx DR7: %08lx\n",
+	printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
 			d6, d7);
 }
 
arch/x86/kernel/process_64.c +12 -12
index 52fbd0c..f9e0331 100644
@@ -161,19 +161,19 @@ void __show_regs(struct pt_regs *regs, int all)
 	unsigned int ds, cs, es;
 
 	show_regs_common();
-	printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+	printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
 	printk_address(regs->ip, 1);
-	printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
+	printk(KERN_DEFAULT "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
 			regs->sp, regs->flags);
-	printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
+	printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n",
 	       regs->ax, regs->bx, regs->cx);
-	printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
+	printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n",
 	       regs->dx, regs->si, regs->di);
-	printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
+	printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n",
 	       regs->bp, regs->r8, regs->r9);
-	printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+	printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n",
 	       regs->r10, regs->r11, regs->r12);
-	printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+	printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n",
 	       regs->r13, regs->r14, regs->r15);
 
 	asm("movl %%ds,%0" : "=r" (ds));
@@ -194,21 +194,21 @@ void __show_regs(struct pt_regs *regs, int all)
 	cr3 = read_cr3();
 	cr4 = read_cr4();
 
-	printk(KERN_INFO "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+	printk(KERN_DEFAULT "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
 	       fs, fsindex, gs, gsindex, shadowgs);
-	printk(KERN_INFO "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
+	printk(KERN_DEFAULT "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
 			es, cr0);
-	printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
+	printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
 			cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
 	get_debugreg(d2, 2);
-	printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
+	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
 	get_debugreg(d3, 3);
 	get_debugreg(d6, 6);
 	get_debugreg(d7, 7);
-	printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
 }
 
 void show_regs(struct pt_regs *regs)
Signature · 1 line
1.6.0.4
#1 lore raw
Commit-ID:  d015a092989d673df44a5ad6866dc5d5006b7a2a
Gitweb:     http://git.kernel.org/tip/d015a092989d673df44a5ad6866dc5d5006b7a2a
Author:     Pekka Enberg <[email protected]>
AuthorDate: Mon, 28 Dec 2009 10:26:59 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Mon, 28 Dec 2009 09:40:21 +0100

x86: Use KERN_DEFAULT log-level in __show_regs()

Andrew Morton reported a strange looking kmemcheck warning:

WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20) 0000000000000000310000000000000000000000000000002413000000c9ffff
u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The problem here is that the output comes from syslog which doesn't show KERN_INFO log-level messages. We didn't see this before because both of us were testing on 32-bit kernels which use the _default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for __show_regs() printks.

Cc Vegard Nossum <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Arjan van de Ven <[email protected]>
Cc Linus Torvalds <[email protected]>

LKML-Reference: <1261988819.4641.2.camel@penberg-laptop>

---
 arch/x86/kernel/process.c    |    4 ++--
 arch/x86/kernel/process_32.c |   14 +++++++-------
 arch/x86/kernel/process_64.c |   24 ++++++++++++------------
 3 files changed, 21 insertions(+), 21 deletions(-)
arch/x86/kernel/process.c +2 -2
index 98c2cde..c6ee241 100644
@@ -103,8 +103,8 @@ void show_regs_common(void)
 	if (!product)
 		product = "";
 
-	printk("\n");
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+	printk(KERN_CONT "\n");
+	printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
 		current->pid, current->comm, print_tainted(),
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
arch/x86/kernel/process_32.c +7 -7
index 9c517b5..37ad1e0 100644
@@ -139,16 +139,16 @@ void __show_regs(struct pt_regs *regs, int all)
 
 	show_regs_common();
 
-	printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
+	printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
 			(u16)regs->cs, regs->ip, regs->flags,
 			smp_processor_id());
 	print_symbol("EIP is at %s\n", regs->ip);
 
-	printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+	printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
 		regs->ax, regs->bx, regs->cx, regs->dx);
-	printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+	printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
 		regs->si, regs->di, regs->bp, sp);
-	printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+	printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
 	       (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
 
 	if (!all)
@@ -158,19 +158,19 @@ void __show_regs(struct pt_regs *regs, int all)
 	cr2 = read_cr2();
 	cr3 = read_cr3();
 	cr4 = read_cr4_safe();
-	printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+	printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
 			cr0, cr2, cr3, cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
 	get_debugreg(d2, 2);
 	get_debugreg(d3, 3);
-	printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+	printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
 			d0, d1, d2, d3);
 
 	get_debugreg(d6, 6);
 	get_debugreg(d7, 7);
-	printk("DR6: %08lx DR7: %08lx\n",
+	printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
 			d6, d7);
 }
 
arch/x86/kernel/process_64.c +12 -12
index 52fbd0c..f9e0331 100644
@@ -161,19 +161,19 @@ void __show_regs(struct pt_regs *regs, int all)
 	unsigned int ds, cs, es;
 
 	show_regs_common();
-	printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+	printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
 	printk_address(regs->ip, 1);
-	printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
+	printk(KERN_DEFAULT "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
 			regs->sp, regs->flags);
-	printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
+	printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n",
 	       regs->ax, regs->bx, regs->cx);
-	printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
+	printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n",
 	       regs->dx, regs->si, regs->di);
-	printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
+	printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n",
 	       regs->bp, regs->r8, regs->r9);
-	printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+	printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n",
 	       regs->r10, regs->r11, regs->r12);
-	printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+	printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n",
 	       regs->r13, regs->r14, regs->r15);
 
 	asm("movl %%ds,%0" : "=r" (ds));
@@ -194,21 +194,21 @@ void __show_regs(struct pt_regs *regs, int all)
 	cr3 = read_cr3();
 	cr4 = read_cr4();
 
-	printk(KERN_INFO "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+	printk(KERN_DEFAULT "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
 	       fs, fsindex, gs, gsindex, shadowgs);
-	printk(KERN_INFO "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
+	printk(KERN_DEFAULT "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
 			es, cr0);
-	printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
+	printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
 			cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
 	get_debugreg(d2, 2);
-	printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
+	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
 	get_debugreg(d3, 3);
 	get_debugreg(d6, 6);
 	get_debugreg(d7, 7);
-	printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
 }
 
 void show_regs(struct pt_regs *regs)
#2 lore raw
In reply to Pekka Enberg
Quoted 36 lines · Pekka Enberg

From: Pekka Enberg <[email protected]>

Andrew Morton reported a strange looking kmemcheck warning:

WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20) 0000000000000000310000000000000000000000000000002413000000c9ffff
u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The problem here is that the output comes from syslog which doesn't show KERN_INFO log-level messages. We didn't see this before because both of us were testing on 32-bit kernels which use the _default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for __show_regs() printks.

Cc Vegard Nossum <[email protected]>
Cc Andrew Morton <[email protected]>
---
 arch/x86/kernel/process.c    |    4 ++--
 arch/x86/kernel/process_32.c |   14 +++++++-------
 arch/x86/kernel/process_64.c |   24 ++++++++++++------------
 3 files changed, 21 insertions(+), 21 deletions(-)
arch/x86/kernel/process.c +0 -0
index 98c2cde..c6ee241 100644

arch/x86/kernel/process.c void show_regs_common(void) · line 107

Quoted 7 lines
arch/x86/kernel/process.c +2 -2
@@ -103,8 +103,8 @@ void show_regs_common(void)
 	if (!product)
 		product = "";
 
-	printk("\n");
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+	printk(KERN_CONT "\n");
+	printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",

What is the reason to convert KERN_INFO to KERN_DEFAULT here?

The original commit for KERN_DEFAULT said:

This adds a KERN_DEFAULT loglevel marker, for when you cannot decide which loglevel you want, and just want to keep an existing printk with the default loglevel.

The difference between having KERN_DEFAULT and having no log-level marker at all is two-fold:

- having the log-level marker will now force a new-line if the previous printout had not added one (perhaps because it forgot, but perhaps because it expected a continuation)

- having a log-level marker is required if you are printing out a message that otherwise itself could perhaps otherwise be mistaken for a log-level.

#3 lore raw

Joe Perches kirjoitti:

Quoted 40 lines · Pekka Enberg
Quoted 39 lines

From: Pekka Enberg <[email protected]>

Andrew Morton reported a strange looking kmemcheck warning:

WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20) 0000000000000000310000000000000000000000000000002413000000c9ffff
u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The problem here is that the output comes from syslog which doesn't show KERN_INFO log-level messages. We didn't see this before because both of us were testing on 32-bit kernels which use the _default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for __show_regs() printks.

Cc Vegard Nossum <[email protected]>
Cc Andrew Morton <[email protected]>
---
 arch/x86/kernel/process.c    |    4 ++--
 arch/x86/kernel/process_32.c |   14 +++++++-------
 arch/x86/kernel/process_64.c |   24 ++++++++++++------------
 3 files changed, 21 insertions(+), 21 deletions(-)
arch/x86/kernel/process.c +0 -0
index 98c2cde..c6ee241 100644
@@ -103,8 +103,8 @@ void show_regs_common(void)
 	if (!product)
 		product = "";
 
Quoted 6 lines

arch/x86/kernel/process.c void show_regs_common(void) · line 107

Quoted 4 lines
arch/x86/kernel/process.c +2 -2
-	printk("\n");
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+	printk(KERN_CONT "\n");
+	printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",

What is the reason to convert KERN_INFO to KERN_DEFAULT here?

To be consistent with rest of __show_regs() log-levels.

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw

Hi Joe,

[ I'm restoring CC, dunno if I broke accidentally. ]

Joe Perches kirjoitti:

Quoted 5 lines · Pekka Enberg
Quoted 3 lines

Joe Perches kirjoitti:

Quoted 1 line

What is the reason to convert KERN_INFO to KERN_DEFAULT here?

To be consistent with rest of __show_regs() log-levels.

Quoted 8 lines

What log level is DEFAULT?

It's default 4 or WARNING, but I'd guess you had to look to find it.

Does anyone override it?

Why not simply specify KERN_WARNING for all of them?

For the reasons outlined here:

Quoted 5 lines

from:

$ git log -1 e28d713704117bca0820c732210df6075b09f13b
This adds a KERN_DEFAULT loglevel marker, for when you cannot decide
which loglevel you want, and just want to keep an existing printk
with the default loglevel.

The whole point of the patch is to unify 32-bit and 64-bit wrt log-levels. The 32-bit version _is_ using KERN_DEFAULT implicitly and KERN_INFO is arguably wrong which is why I decided to go with the former. That way I don't need to go and audit all the callers of __show_regs() to see if KERN_WARN or some other level makes sense for them.

Pekka