Skip to contentSkip to conversation

Device Tree "Status" Property Question

DISCUSSION John Schmoller 3 participants 3 messages Dec 30, 2009 – Jan 4, 2010

lore
Share & tools
lore
#0 lore raw

Hello all,

I'm currently working with U-Boot to pass POST results to Linux in an FDT. To do this, I'm intending to use the "status" property, as documented in ePAPR 1.0 (I'm using PowerPC). My question involves the "fail-sss" property value. What is the intention of "sss"? Is it meant to be 3 digit error code, or a string, or what? I'd like to append a failure message to the value if that's appropriate. Something like "fail-Widgit X did not respond" or some such thing. Please let me know if that's not the intended use of the "fail-sss" value.

Thanks for your time,
John

#1 lore raw
Quoted 5 lines

-----Original Message-----
From:
devicetree-discuss-bounces+stuart.yoder=freescale.com-uLR06cmDAlY@public.gmane.org

labs.org [mailto:devicetree-discuss-> bounces+stuart.yoder=freescale.com-uLR06cmDAlY/[email protected]] On

Quoted 7 lines

Behalf Of John Schmoller
Sent: Wednesday, December 30, 2009 10:58 AM
To: devicetree-discuss-uLR06cmDAlY/[email protected]
Subject: Device Tree "Status" Property Question

Hello all,

Quoted 10 lines

I'm currently working with U-Boot to pass POST results to Linux in an FDT. To do this, I'm intending to use the "status" property, as documented in ePAPR 1.0 (I'm using PowerPC). My question involves the "fail-sss" property value. What is the intention of "sss"? Is it meant
to be 3 digit error code, or a string, or what? I'd like to append a failure message to the value if that's appropriate. Something like "fail-Widgit X did not respond" or some such thing. Please let me know
if that's not the intended use of the "fail-sss" value.

This property comes from IEEE-1275 and it's described use in that
spec is that the "sss" is human readable information. So a message
as you described seems perfectly fine. I've seen nothing that would indicate a 3 digit error code is intended.

We plan to do a minor rev to the ePAPR in the near future and will clarify that when we do it.

Stuart

#2 lore raw
In reply to John Schmoller
Quoted 10 lines · John Schmoller

Hello all,

I'm currently working with U-Boot to pass POST results to Linux in an FDT. To do this, I'm intending to use the "status" property, as documented in ePAPR 1.0 (I'm using PowerPC). My question involves the "fail-sss" property value. What is the intention of "sss"? Is it meant to be 3 digit error code, or a string, or what? I'd like to append a failure message to the value if that's appropriate. Something like "fail-Widgit X did not respond" or some such thing. Please let me know if that's not the intended use of the "fail-sss" value.

I believe it's supposed to be an arbitrary string, the meaning of which is device-specific.

-Scott