Skip to contentSkip to conversation

OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits.

PATCH Superseded Thara Gopinath 1 participant 1 message Jan 24, 2010

Subsystems (5)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits.

In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9.

In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different.
The IP_REVISION register should be at offset 0x00.
It should contain a SCHEME field From this we can determine legacy or HL.

31:30 SCHEME Used to distinguish between old scheme and current.
Read 0x0: Legacy ASP or WTBU scheme
Read 0x1: Highlander 0.8 scheme

For legacy IP
13:12 MIDLEMODE

 11:8  CLOCKACTIVITY
 6     EMUSOFT
 5     EMUFREE
 4:3   SIDLEMODE
 2     ENAWAKEUP
 1     SOFTRESET
 0     AUTOIDLE

For Highlander IP, the bit position in SYSCONFIG is (for simple target):

 5:4   STANDBYMODE (Ex MIDLEMODE)
 3:2   IDLEMODE (Ex SIDLEMODE)
 1     FREEEMU (Ex EMUFREE)
 0     SOFTRESET

Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs.

This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_fields and omap_hwmod_sysc_highlander are defined which can be used directly to populate the sysc_fields if the IP follows legacy or highlander scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig.

---
 arch/arm/mach-omap2/Makefile                 |    3 +-
 arch/arm/mach-omap2/omap_hwmod.c             |  100 ++++++++++++++++++++++----
 arch/arm/mach-omap2/omap_hwmod_common_data.c |   44 +++++++++++
 arch/arm/plat-omap/include/plat/omap_hwmod.h |   65 +++++++++++++----
 4 files changed, 184 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_common_data.c
arch/arm/mach-omap2/Makefile +2 -1
index a08aa62..cbeb8bd 100644
@@ -5,7 +5,8 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o \
+					  omap_hwmod_common_data.o
 omap-3-4-common				= dpll.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clock_common_data.o clockdomain.o
arch/arm/mach-omap2/omap_hwmod.c +87 -13

174 lines not on this page · raw message

arch/arm/mach-omap2/omap_hwmod_common_data.c new file +44 -0

44 lines not on this page · raw message

arch/arm/plat-omap/include/plat/omap_hwmod.h +51 -14

95 lines not on this page · raw message

Signature · 1 line
1.5.6.3