Skip to contentSkip to conversation

Work to enable SmartMedia/xD support

PATCH Superseded Maxim Levitsky 2 participants 21 messages Jan 30, 2010 – Feb 1, 2010

Subsystems (3)

v5 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 Work to enable SmartMedia/xD support

Hi,

Here is another minor revision of my work.
In this version I added few (two) sysfs attributes for udev rules

One attribute is exported my mtd driver, and specifies if this is smartmedia or xd card (its called "media_type")

Another attribute is exported by FTL, and it is extracted vendor name from the card CIS. I added short common code to translation layer to allow such thing.

Tested this again on 256 byte/page nandsim device, and everything works as usual. I don't think I will need to change anything major from now on.

Best regards,
Maxim Levitsky

#1 lore raw

PATCH 1/17 MTD: create lockless versions of {get,put}_mtd_device This will be used to resolve deadlock in block translation layer.

These functions can be used as long as we don't need access to global mtd table, but have a pointer to the mtd device.

---
 drivers/mtd/mtdcore.c   |   60 ++++++++++++++++++++++++++++++----------------
 include/linux/mtd/mtd.h |    3 +-
 2 files changed, 41 insertions(+), 22 deletions(-)
drivers/mtd/mtdcore.c +39 -21
index c356c0a..3bdb7e8 100644
@@ -453,27 +453,38 @@ struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
 			ret = NULL;
 	}
 
-	if (!ret)
-		goto out_unlock;
-
-	if (!try_module_get(ret->owner))
-		goto out_unlock;
-
-	if (ret->get_device) {
-		err = ret->get_device(ret);
-		if (err)
-			goto out_put;
+	if (!ret) {
+		ret = ERR_PTR(err);
+		goto out;
 	}
 
-	ret->usecount++;
+	err = __get_mtd_device(ret);
+	if (err)
+		ret = ERR_PTR(err);
+out:
 	mutex_unlock(&mtd_table_mutex);
 	return ret;
+}
 
-out_put:
-	module_put(ret->owner);
-out_unlock:
-	mutex_unlock(&mtd_table_mutex);
-	return ERR_PTR(err);
+
+int __get_mtd_device(struct mtd_info *mtd)
+{
+	int err;
+
+	if (!try_module_get(mtd->owner))
+		return -ENODEV;
+
+	if (mtd->get_device) {
+
+		err = mtd->get_device(mtd);
+
+		if (err) {
+			module_put(mtd->owner);
+			return err;
+		}
+	}
+	mtd->usecount++;
+	return 0;
 }
 
 /**
@@ -524,14 +535,19 @@ out_unlock:
 
 void put_mtd_device(struct mtd_info *mtd)
 {
-	int c;
-
 	mutex_lock(&mtd_table_mutex);
-	c = --mtd->usecount;
+	__put_mtd_device(mtd);
+	mutex_unlock(&mtd_table_mutex);
+
+}
+
+void __put_mtd_device(struct mtd_info *mtd)
+{
+	--mtd->usecount;
+	BUG_ON(mtd->usecount < 0);
+
 	if (mtd->put_device)
 		mtd->put_device(mtd);
-	mutex_unlock(&mtd_table_mutex);
-	BUG_ON(c < 0);
 
 	module_put(mtd->owner);
 }
@@ -569,7 +585,9 @@ EXPORT_SYMBOL_GPL(add_mtd_device);
 EXPORT_SYMBOL_GPL(del_mtd_device);
 EXPORT_SYMBOL_GPL(get_mtd_device);
 EXPORT_SYMBOL_GPL(get_mtd_device_nm);
+EXPORT_SYMBOL_GPL(__get_mtd_device);
 EXPORT_SYMBOL_GPL(put_mtd_device);
+EXPORT_SYMBOL_GPL(__put_mtd_device);
 EXPORT_SYMBOL_GPL(register_mtd_user);
 EXPORT_SYMBOL_GPL(unregister_mtd_user);
 EXPORT_SYMBOL_GPL(default_mtd_writev);
include/linux/mtd/mtd.h +2 -1
index 0f32a9b..662d747 100644
@@ -290,8 +290,9 @@ extern int add_mtd_device(struct mtd_info *mtd);
 extern int del_mtd_device (struct mtd_info *mtd);
 
 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern int __get_mtd_device(struct mtd_info *mtd);
+extern void __put_mtd_device(struct mtd_info *mtd);
 extern struct mtd_info *get_mtd_device_nm(const char *name);
-
 extern void put_mtd_device(struct mtd_info *mtd);
 
 
Signature · 1 line
1.6.3.3
#2 lore raw

PATCH 2/17 blktrans: nuke mtd_blkcore_priv and make both thread and disk queue be per device

In reply to Maxim Levitsky

This is the biggest change. To make hotplug possible, and this layer clearer, now mtd_blktrans_dev contains everything for a single mtd block translation device. Also removed some very old leftovers

---
 drivers/mtd/mtd_blkdevs.c    |  123 ++++++++++++++++++++----------------------
 include/linux/mtd/blktrans.h |   10 ++--
 2 files changed, 64 insertions(+), 69 deletions(-)
drivers/mtd/mtd_blkdevs.c +59 -64
index c82e09b..93c87af 100644
@@ -26,11 +26,6 @@
 
 static LIST_HEAD(blktrans_majors);
 
-struct mtd_blkcore_priv {
-	struct task_struct *thread;
-	struct request_queue *rq;
-	spinlock_t queue_lock;
-};
 
 static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 			       struct mtd_blktrans_dev *dev,
@@ -80,14 +75,13 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 
 static int mtd_blktrans_thread(void *arg)
 {
-	struct mtd_blktrans_ops *tr = arg;
-	struct request_queue *rq = tr->blkcore_priv->rq;
+	struct mtd_blktrans_dev *dev = arg;
+	struct request_queue *rq = dev->rq;
 	struct request *req = NULL;
 
 	spin_lock_irq(rq->queue_lock);
 
 	while (!kthread_should_stop()) {
-		struct mtd_blktrans_dev *dev;
 		int res;
 
 		if (!req && !(req = blk_fetch_request(rq))) {
@@ -98,13 +92,10 @@ static int mtd_blktrans_thread(void *arg)
 			continue;
 		}
 
-		dev = req->rq_disk->private_data;
-		tr = dev->tr;
-
 		spin_unlock_irq(rq->queue_lock);
 
 		mutex_lock(&dev->lock);
-		res = do_blktrans_request(tr, dev, req);
+		res = do_blktrans_request(dev->tr, dev, req);
 		mutex_unlock(&dev->lock);
 
 		spin_lock_irq(rq->queue_lock);
@@ -123,8 +114,8 @@ static int mtd_blktrans_thread(void *arg)
 
 static void mtd_blktrans_request(struct request_queue *rq)
 {
-	struct mtd_blktrans_ops *tr = rq->queuedata;
-	wake_up_process(tr->blkcore_priv->thread);
+	struct mtd_blktrans_dev *dev = rq->queuedata;
+	wake_up_process(dev->thread);
 }
 
 
@@ -214,6 +205,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	struct mtd_blktrans_dev *d;
 	int last_devnum = -1;
 	struct gendisk *gd;
+	int ret;
 
 	if (mutex_trylock(&mtd_table_mutex)) {
 		mutex_unlock(&mtd_table_mutex);
@@ -239,12 +231,13 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 		}
 		last_devnum = d->devnum;
 	}
+
+	ret = -EBUSY;
 	if (new->devnum == -1)
 		new->devnum = last_devnum+1;
 
-	if ((new->devnum << tr->part_bits) > 256) {
-		return -EBUSY;
-	}
+	if ((new->devnum << tr->part_bits) > 256)
+		goto error1;
 
 	list_add_tail(&new->list, &tr->devs);
  added:
@@ -252,11 +245,16 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	if (!tr->writesect)
 		new->readonly = 1;
 
+
+	/* Create gendisk */
+	ret = -ENOMEM;
 	gd = alloc_disk(1 << tr->part_bits);
-	if (!gd) {
-		list_del(&new->list);
-		return -ENOMEM;
-	}
+
+	if (!gd)
+		goto error2;
+
+	new->disk = gd;
+	gd->private_data = new;
 	gd->major = tr->major;
 	gd->first_minor = (new->devnum) << tr->part_bits;
 	gd->fops = &mtd_blktrans_ops;
@@ -274,13 +272,33 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 		snprintf(gd->disk_name, sizeof(gd->disk_name),
 			 "%s%d", tr->name, new->devnum);
 
-	/* 2.5 has capacity in units of 512 bytes while still
-	   having BLOCK_SIZE_BITS set to 10. Just to keep us amused. */
 	set_capacity(gd, (new->size * tr->blksize) >> 9);
 
-	gd->private_data = new;
-	new->blkcore_priv = gd;
-	gd->queue = tr->blkcore_priv->rq;
+
+	/* Create the request queue */
+	spin_lock_init(&new->queue_lock);
+	new->rq = blk_init_queue(mtd_blktrans_request, &new->queue_lock);
+
+	if (!new->rq)
+		goto error3;
+
+	new->rq->queuedata = new;
+	blk_queue_logical_block_size(new->rq, tr->blksize);
+
+	if (tr->discard)
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+					new->rq);
+
+	gd->queue = new->rq;
+
+	/* Create processing thread */
+	/* TODO: workqueue ? */
+	new->thread = kthread_run(mtd_blktrans_thread, new,
+			"%s%d", tr->name, new->mtd->index);
+	if (IS_ERR(new->thread)) {
+		ret = PTR_ERR(new->thread);
+		goto error4;
+	}
 	gd->driverfs_dev = &new->mtd->dev;
 
 	if (new->readonly)
@@ -289,6 +307,15 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	add_disk(gd);
 
 	return 0;
+error4:
+	blk_cleanup_queue(new->rq);
+error3:
+	put_disk(new->disk);
+error2:
+	list_del(&new->list);
+error1:
+	kfree(new);
+	return ret;
 }
 
 int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
@@ -300,9 +327,13 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 
 	list_del(&old->list);
 
-	del_gendisk(old->blkcore_priv);
-	put_disk(old->blkcore_priv);
+	/* stop new requests to arrive */
+	del_gendisk(old->disk);
+
+	/* Stop the thread */
+	kthread_stop(old->thread);
 
+	blk_cleanup_queue(old->rq);
 	return 0;
 }
 
@@ -343,9 +374,6 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	if (!blktrans_notifier.list.next)
 		register_mtd_user(&blktrans_notifier);
 
-	tr->blkcore_priv = kzalloc(sizeof(*tr->blkcore_priv), GFP_KERNEL);
-	if (!tr->blkcore_priv)
-		return -ENOMEM;
 
 	mutex_lock(&mtd_table_mutex);
 
@@ -353,39 +381,12 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	if (ret) {
 		printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
 		       tr->name, tr->major, ret);
-		kfree(tr->blkcore_priv);
 		mutex_unlock(&mtd_table_mutex);
 		return ret;
 	}
-	spin_lock_init(&tr->blkcore_priv->queue_lock);
-
-	tr->blkcore_priv->rq = blk_init_queue(mtd_blktrans_request, &tr->blkcore_priv->queue_lock);
-	if (!tr->blkcore_priv->rq) {
-		unregister_blkdev(tr->major, tr->name);
-		kfree(tr->blkcore_priv);
-		mutex_unlock(&mtd_table_mutex);
-		return -ENOMEM;
-	}
-
-	tr->blkcore_priv->rq->queuedata = tr;
-	blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize);
-	if (tr->discard)
-		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
-					tr->blkcore_priv->rq);
 
 	tr->blkshift = ffs(tr->blksize) - 1;
 
-	tr->blkcore_priv->thread = kthread_run(mtd_blktrans_thread, tr,
-			"%sd", tr->name);
-	if (IS_ERR(tr->blkcore_priv->thread)) {
-		ret = PTR_ERR(tr->blkcore_priv->thread);
-		blk_cleanup_queue(tr->blkcore_priv->rq);
-		unregister_blkdev(tr->major, tr->name);
-		kfree(tr->blkcore_priv);
-		mutex_unlock(&mtd_table_mutex);
-		return ret;
-	}
-
 	INIT_LIST_HEAD(&tr->devs);
 	list_add(&tr->list, &blktrans_majors);
 
@@ -405,8 +406,6 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 
 	mutex_lock(&mtd_table_mutex);
 
-	/* Clean up the kernel thread */
-	kthread_stop(tr->blkcore_priv->thread);
 
 	/* Remove it from the list of active majors */
 	list_del(&tr->list);
@@ -414,13 +413,9 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	list_for_each_entry_safe(dev, next, &tr->devs, list)
 		tr->remove_dev(dev);
 
-	blk_cleanup_queue(tr->blkcore_priv->rq);
 	unregister_blkdev(tr->major, tr->name);
-
 	mutex_unlock(&mtd_table_mutex);
 
-	kfree(tr->blkcore_priv);
-
 	BUG_ON(!list_empty(&tr->devs));
 	return 0;
 }
include/linux/mtd/blktrans.h +5 -5
index 8b4aa05..a4b3928 100644
@@ -24,11 +24,13 @@ struct mtd_blktrans_dev {
 	int devnum;
 	unsigned long size;
 	int readonly;
-	void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */
+	struct gendisk *disk;
+	struct task_struct *thread;
+	struct request_queue *rq;
+	spinlock_t queue_lock;
+	void *priv;
 };
 
-struct blkcore_priv; /* Differs for 2.4 and 2.5 kernels; private */
-
 struct mtd_blktrans_ops {
 	char *name;
 	int major;
@@ -60,8 +62,6 @@ struct mtd_blktrans_ops {
 	struct list_head devs;
 	struct list_head list;
 	struct module *owner;
-
-	struct mtd_blkcore_priv *blkcore_priv;
 };
 
 extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
Signature · 1 line
1.6.3.3
#3 lore raw

PATCH 3/17 blktrans: track open and close calls.

In reply to Maxim Levitsky

This patch adds tracking for open and close calls. Now trans ->open and ->release are never called twise in a row ->release is also called once before mtd device disappers

Proper locking will be added in follow up patch

---
 drivers/mtd/mtd_blkdevs.c    |   18 ++++++++++++++++++
 include/linux/mtd/blktrans.h |    1 +
 2 files changed, 19 insertions(+), 0 deletions(-)
drivers/mtd/mtd_blkdevs.c +18 -0
index 93c87af..966398b 100644
@@ -128,6 +128,9 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	if (!get_mtd_device(NULL, dev->mtd->index))
 		goto out;
 
+	if (dev->open++)
+		goto out;
+
 	if (!try_module_get(tr->owner))
 		goto out_tr;
 
@@ -153,6 +156,10 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = 0;
 
+	dev->open--;
+	if (dev->open)
+		return 0;
+
 	if (tr->release)
 		ret = tr->release(dev);
 
@@ -304,6 +311,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	if (new->readonly)
 		set_disk_ro(gd, 1);
 
+	new->open = 0;
 	add_disk(gd);
 
 	return 0;
@@ -333,6 +341,16 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	/* Stop the thread */
 	kthread_stop(old->thread);
 
+	if (old->open) {
+		if (old->tr->release)
+			old->tr->release(old);
+		put_mtd_device(old->mtd);
+	}
+
+	/* From now on, no calls into trans can be made */
+	/* Mtd device will be gone real soon now */
+	old->mtd = NULL;
+ 
 	blk_cleanup_queue(old->rq);
 	return 0;
 }
include/linux/mtd/blktrans.h +1 -0
index a4b3928..507f7b2 100644
@@ -24,6 +24,7 @@ struct mtd_blktrans_dev {
 	int devnum;
 	unsigned long size;
 	int readonly;
+	int open;
 	struct gendisk *disk;
 	struct task_struct *thread;
 	struct request_queue *rq;
Signature · 1 line
1.6.3.3
#4 lore raw

Re: [PATCH 03/17] blktrans: track open and close calls.

Quoted 18 lines · Maxim Levitsky

This patch adds tracking for open and close calls. Now trans ->open and ->release are never called twise in a row ->release is also called once before mtd device disappers
...

drivers/mtd/mtd_blkdevs.c +3 -0
@@ -128,6 +128,9 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	if (!get_mtd_device(NULL, dev->mtd->index))
 		goto out;
 
+	if (dev->open++)
+		goto out;
+
 	if (!try_module_get(tr->owner))
 		goto out_tr;
 

drivers/mtd/mtd_blkdevs.c static int blktrans_release(struct gendisk *disk, fmode_t mode) · line 162

Quoted 7 lines
drivers/mtd/mtd_blkdevs.c +4 -0
@@ -153,6 +156,10 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = 0;
 
+	dev->open--;
+	if (dev->open)
+		return 0;
+

Just a very minor quibble: if you use if (dev->open++) in one function, why not use if (--dev->open) in the other? Or separate the increment/decrement from the test, depending on you style preferences.

/Ricard

Signature · 3 lines
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30
#5 lore raw

Re: [PATCH 03/17] blktrans: track open and close calls.

Quoted 23 lines · Ricard Wanderlof
Quoted 21 lines · Maxim Levitsky

This patch adds tracking for open and close calls. Now trans ->open and ->release are never called twise in a row ->release is also called once before mtd device disappers
...

drivers/mtd/mtd_blkdevs.c +3 -0
@@ -128,6 +128,9 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	if (!get_mtd_device(NULL, dev->mtd->index))
 		goto out;
 
+	if (dev->open++)
+		goto out;
+
 	if (!try_module_get(tr->owner))
 		goto out_tr;
 
@@ -153,6 +156,10 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = 0;
 
Quoted 8 lines

drivers/mtd/mtd_blkdevs.c static int blktrans_release(struct gendisk *disk, fmode_t mode) · line 162

Quoted 4 lines
drivers/mtd/mtd_blkdevs.c +4 -0
+	dev->open--;
+	if (dev->open)
+		return 0;
+

Just a very minor quibble: if you use if (dev->open++) in one function, why not use if (--dev->open) in the other? Or separate the increment/decrement from the test, depending on you style preferences.

No problem, this just got lost in all the noise.
I tried all kinds of approaches to make hotplug reliable, before finally making it be so. (It is really stable here, I didn't have any hotplug related issues for very long time)

In fact I feel that my xd card is more stable that sd one... (I recently found a bug in sdhci driver....)

I would be very happy to receive a full review of the patches, and get it in the kernel.

Best regards,
Maxim Levitsky

#6 lore raw

PATCH 4/17 blktrans: don't free mtd_blktrans_dev, core will do that for you

In reply to Maxim Levitsky

We need that structure till last user exits, and that might be years after mtd device disappered.

---
 drivers/mtd/ftl.c            |    1 -
 drivers/mtd/inftlcore.c      |    1 -
 drivers/mtd/mtd_blkdevs.c    |   13 +++++++++++++
 drivers/mtd/mtdblock.c       |    1 -
 drivers/mtd/mtdblock_ro.c    |    1 -
 drivers/mtd/nftlcore.c       |    1 -
 drivers/mtd/rfd_ftl.c        |    1 -
 drivers/mtd/ssfdc.c          |    1 -
 include/linux/mtd/blktrans.h |    1 +
 9 files changed, 14 insertions(+), 7 deletions(-)
drivers/mtd/ftl.c +0 -1
index e56d6b4..62da9eb 100644
@@ -1082,7 +1082,6 @@ static void ftl_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	del_mtd_blktrans_dev(dev);
 	ftl_freepart((partition_t *)dev);
-	kfree(dev);
 }
 
 static struct mtd_blktrans_ops ftl_tr = {
drivers/mtd/inftlcore.c +0 -1
index 8aca552..015a7fe 100755
@@ -139,7 +139,6 @@ static void inftl_remove_dev(struct mtd_blktrans_dev *dev)
 
 	kfree(inftl->PUtable);
 	kfree(inftl->VUtable);
-	kfree(inftl);
 }
 
 /*
drivers/mtd/mtd_blkdevs.c +13 -0
index 966398b..9e118cf 100644
@@ -131,6 +131,9 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	if (dev->open++)
 		goto out;
 
+	if (dev->deleted)
+		goto out;
+
 	if (!try_module_get(tr->owner))
 		goto out_tr;
 
@@ -169,6 +172,14 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 		module_put(tr->owner);
 	}
 
+	/* Free the private data */
+	if (dev->deleted) {
+		module_put(tr->owner);
+		mutex_unlock(&dev->lock);
+		kfree(dev);
+		return 0;
+	}
+
 	return ret;
 }
 
@@ -338,6 +349,8 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	/* stop new requests to arrive */
 	del_gendisk(old->disk);
 
+	old->deleted = 1;
+
 	/* Stop the thread */
 	kthread_stop(old->thread);
 
drivers/mtd/mtdblock.c +0 -1
index 9f41b1a..d8322cc 100644
@@ -368,7 +368,6 @@ static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	del_mtd_blktrans_dev(dev);
-	kfree(dev);
 }
 
 static struct mtd_blktrans_ops mtdblock_tr = {
drivers/mtd/mtdblock_ro.c +0 -1
index 852165f..54ff288 100644
@@ -49,7 +49,6 @@ static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	del_mtd_blktrans_dev(dev);
-	kfree(dev);
 }
 
 static struct mtd_blktrans_ops mtdblock_tr = {
drivers/mtd/nftlcore.c +0 -1
index 1002e18..a4578bf 100644
@@ -126,7 +126,6 @@ static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
 	del_mtd_blktrans_dev(dev);
 	kfree(nftl->ReplUnitTable);
 	kfree(nftl->EUNtable);
-	kfree(nftl);
 }
 
 /*
drivers/mtd/rfd_ftl.c +0 -1
index d2aa9c4..63b83c0 100644
@@ -817,7 +817,6 @@ static void rfd_ftl_remove_dev(struct mtd_blktrans_dev *dev)
 	vfree(part->sector_map);
 	kfree(part->header_cache);
 	kfree(part->blocks);
-	kfree(part);
 }
 
 static struct mtd_blktrans_ops rfd_ftl_tr = {
drivers/mtd/ssfdc.c +0 -1
index 3f67e00..81c4ecd 100644
@@ -375,7 +375,6 @@ static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
 
 	del_mtd_blktrans_dev(dev);
 	kfree(ssfdc->logic_block_map);
-	kfree(ssfdc);
 }
 
 static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
include/linux/mtd/blktrans.h +1 -0
index 507f7b2..e276aca 100644
@@ -24,6 +24,7 @@ struct mtd_blktrans_dev {
 	int devnum;
 	unsigned long size;
 	int readonly;
+	int deleted;
 	int open;
 	struct gendisk *disk;
 	struct task_struct *thread;
Signature · 1 line
1.6.3.3
#7 lore raw

PATCH 5/17 blktrans: add proper locking

In reply to Maxim Levitsky

First, use lockless versions of get/put_mtd_device
We don't care what happened to mtd table, because we have a pointer to mtd device. It guaranteed to exist till we do final put_mtd_device

Also add locking to prevent all kinds or races

---
 drivers/mtd/mtd_blkdevs.c |   82 ++++++++++++++++++++++++++++----------------
 1 files changed, 52 insertions(+), 30 deletions(-)
drivers/mtd/mtd_blkdevs.c +52 -30
index 9e118cf..841c6ae 100644
@@ -123,33 +123,33 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 {
 	struct mtd_blktrans_dev *dev = bdev->bd_disk->private_data;
 	struct mtd_blktrans_ops *tr = dev->tr;
-	int ret = -ENODEV;
-
-	if (!get_mtd_device(NULL, dev->mtd->index))
-		goto out;
+	int ret = 0;
 
+	mutex_lock(&dev->lock);
 	if (dev->open++)
 		goto out;
 
 	if (dev->deleted)
 		goto out;
 
+	ret = -ENODEV;
 	if (!try_module_get(tr->owner))
-		goto out_tr;
+		goto out;
 
-	/* FIXME: Locking. A hot pluggable device can go away
-	   (del_mtd_device can be called for it) without its module
-	   being unloaded. */
-	dev->mtd->usecount++;
+	if (__get_mtd_device(dev->mtd)) {
+		module_put(tr->owner);
+		goto out;
+	}
 
 	ret = 0;
 	if (tr->open && (ret = tr->open(dev))) {
-		dev->mtd->usecount--;
-		put_mtd_device(dev->mtd);
-	out_tr:
 		module_put(tr->owner);
+		__put_mtd_device(dev->mtd);
+		goto out;
+
 	}
  out:
+	mutex_unlock(&dev->lock);
 	return ret;
 }
 
@@ -159,18 +159,11 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = 0;
 
+	mutex_lock(&dev->lock);
 	dev->open--;
 	if (dev->open)
 		return 0;
 
-	if (tr->release)
-		ret = tr->release(dev);
-
-	if (!ret) {
-		dev->mtd->usecount--;
-		put_mtd_device(dev->mtd);
-		module_put(tr->owner);
-	}
 
 	/* Free the private data */
 	if (dev->deleted) {
@@ -180,33 +173,59 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 		return 0;
 	}
 
+	ret = tr->release ? tr->release(dev) : 0;
+	module_put(tr->owner);
+
+	if (dev->mtd)
+		__put_mtd_device(dev->mtd);
+
+	mutex_unlock(&dev->lock);
 	return ret;
 }
 
 static int blktrans_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 {
 	struct mtd_blktrans_dev *dev = bdev->bd_disk->private_data;
+	int error;
+
+	mutex_lock(&dev->lock);
 
+	error = -ENODEV;
+	if (dev->deleted)
+		goto out;
+
+	error = -ENOTTY;
 	if (dev->tr->getgeo)
-		return dev->tr->getgeo(dev, geo);
-	return -ENOTTY;
+		error = dev->tr->getgeo(dev, geo);
+out:
+	mutex_unlock(&dev->lock);
+	return error;
 }
 
 static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
 			      unsigned int cmd, unsigned long arg)
 {
 	struct mtd_blktrans_dev *dev = bdev->bd_disk->private_data;
-	struct mtd_blktrans_ops *tr = dev->tr;
+	int error = -ENODEV;
+
+	mutex_lock(&dev->lock);
+
+	if (dev->deleted)
+		goto out;
+
+	error = -ENOTTY;
 
 	switch (cmd) {
 	case BLKFLSBUF:
-		if (tr->flush)
-			return tr->flush(dev);
-		/* The core code did the work, we had nothing to do. */
-		return 0;
+		if (dev->tr->flush)
+			error = dev->tr->flush(dev);
+		break;
 	default:
-		return -ENOTTY;
+		break;
 	}
+out:
+	mutex_unlock(&dev->lock);
+	return error;
 }
 
 static const struct block_device_operations mtd_blktrans_ops = {
@@ -354,16 +373,19 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	/* Stop the thread */
 	kthread_stop(old->thread);
 
+	/* Tell trans driver to release the device */
+	mutex_lock(&old->lock);
+
 	if (old->open) {
 		if (old->tr->release)
 			old->tr->release(old);
-		put_mtd_device(old->mtd);
+		__put_mtd_device(old->mtd);
 	}
 
 	/* From now on, no calls into trans can be made */
 	/* Mtd device will be gone real soon now */
 	old->mtd = NULL;
- 
+	mutex_unlock(&old->lock); 
 	blk_cleanup_queue(old->rq);
 	return 0;
 }
Signature · 1 line
1.6.3.3
#8 lore raw

PATCH 6/17 blktrans: flush all requests before we remove the device

In reply to Maxim Levitsky

Flush all requests, so we can be sure we don't deadlock the system later when we remove the disk queue.

---
 drivers/mtd/mtd_blkdevs.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)
drivers/mtd/mtd_blkdevs.c +13 -1
index 841c6ae..a65eb07 100644
@@ -115,7 +115,13 @@ static int mtd_blktrans_thread(void *arg)
 static void mtd_blktrans_request(struct request_queue *rq)
 {
 	struct mtd_blktrans_dev *dev = rq->queuedata;
-	wake_up_process(dev->thread);
+	struct request *req = NULL;
+
+	if (dev->deleted)
+		while ((req = blk_fetch_request(rq)) != NULL)
+			__blk_end_request_all(req, -ENODEV);
+	else
+		wake_up_process(dev->thread);
 }
 
 
@@ -358,6 +364,8 @@ error1:
 
 int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 {
+	unsigned long flags;
+
 	if (mutex_trylock(&mtd_table_mutex)) {
 		mutex_unlock(&mtd_table_mutex);
 		BUG();
@@ -368,7 +376,11 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	/* stop new requests to arrive */
 	del_gendisk(old->disk);
 
+	/* flush current requests */
+	spin_lock_irqsave(&old->queue_lock, flags);
 	old->deleted = 1;
+	blk_start_queue(old->rq);
+	spin_unlock_irqrestore(&old->queue_lock, flags);
 
 	/* Stop the thread */
 	kthread_stop(old->thread);
Signature · 1 line
1.6.3.3
#9 lore raw

PATCH 7/17 blktrans: allow FTL drivers to export sysfs attributes

In reply to Maxim Levitsky

This patch add ability to export sysfs attributes below block disk device.
This can be used to pass UDEV information about the FTL and could include vendor, serial, version, etc...

---
 drivers/mtd/mtd_blkdevs.c    |   11 ++++++++++-
 include/linux/mtd/blktrans.h |    2 ++
 2 files changed, 12 insertions(+), 1 deletions(-)
drivers/mtd/mtd_blkdevs.c +10 -1
index a65eb07..1c4e615 100644
@@ -317,7 +317,6 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 
 	set_capacity(gd, (new->size * tr->blksize) >> 9);
 
-
 	/* Create the request queue */
 	spin_lock_init(&new->queue_lock);
 	new->rq = blk_init_queue(mtd_blktrans_request, &new->queue_lock);
@@ -350,6 +349,11 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	new->open = 0;
 	add_disk(gd);
 
+	if (new->disk_attributes)
+		sysfs_create_group(&disk_to_dev(gd)->kobj,
+					new->disk_attributes);
+
+
 	return 0;
 error4:
 	blk_cleanup_queue(new->rq);
@@ -376,6 +380,11 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	/* stop new requests to arrive */
 	del_gendisk(old->disk);
 
+
+	if (old->disk_attributes)
+		sysfs_remove_group(&disk_to_dev(old->disk)->kobj,
+						old->disk_attributes);
+
 	/* flush current requests */
 	spin_lock_irqsave(&old->queue_lock, flags);
 	old->deleted = 1;
include/linux/mtd/blktrans.h +2 -0
index e276aca..faf1e54 100644
@@ -9,6 +9,7 @@
 #define __MTD_TRANS_H__
 
 #include <linux/mutex.h>
+#include <linux/sysfs.h>
 
 struct hd_geometry;
 struct mtd_info;
@@ -27,6 +28,7 @@ struct mtd_blktrans_dev {
 	int deleted;
 	int open;
 	struct gendisk *disk;
+	struct attribute_group *disk_attributes;
 	struct task_struct *thread;
 	struct request_queue *rq;
 	spinlock_t queue_lock;
Signature · 1 line
1.6.3.3
#10 lore raw

PATCH 8/17 MTD: call remove notifiers before removing the device

In reply to Maxim Levitsky

Now that mtd block common layer is prepared for proper hotplug support, enable it here Now all users of the mtd device have a chance to put the mtd device
when they are notified to do so, and they have to do so to make hotplug work.

---
 drivers/mtd/mtdcore.c |   21 +++++++++++----------
 1 files changed, 11 insertions(+), 10 deletions(-)
drivers/mtd/mtdcore.c +11 -10
index 3bdb7e8..0e86208 100644
@@ -341,31 +341,32 @@ int add_mtd_device(struct mtd_info *mtd)
 int del_mtd_device (struct mtd_info *mtd)
 {
 	int ret;
+	struct mtd_notifier *not;
 
 	mutex_lock(&mtd_table_mutex);
 
 	if (mtd_table[mtd->index] != mtd) {
 		ret = -ENODEV;
-	} else if (mtd->usecount) {
+		goto out_error;
+	}
+
+	/* No need to get a refcount on the module containing
+		the notifier, since we hold the mtd_table_mutex */
+	list_for_each_entry(not, &mtd_notifiers, list)
+		not->remove(mtd);
+
+	if (mtd->usecount) {
 		printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n",
 		       mtd->index, mtd->name, mtd->usecount);
 		ret = -EBUSY;
 	} else {
-		struct mtd_notifier *not;
-
 		device_unregister(&mtd->dev);
-
-		/* No need to get a refcount on the module containing
-		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each_entry(not, &mtd_notifiers, list)
-			not->remove(mtd);
-
 		mtd_table[mtd->index] = NULL;
-
 		module_put(THIS_MODULE);
 		ret = 0;
 	}
 
+out_error:
 	mutex_unlock(&mtd_table_mutex);
 	return ret;
 }
Signature · 1 line
1.6.3.3
#11 lore raw

PATCH 9/17 MTD: nand: make MTD_OOB_PLACE work correctly.

In reply to Maxim Levitsky

MTD_OOB_PLACE is supposed to read/write raw oob data similiar to MTD_OOB_RAW however due to a bug, currently its not possible to read more data that specified in oob 'free' regions

---
 drivers/mtd/nand/nand_base.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
drivers/mtd/nand/nand_base.c +5 -1
index 8f2958f..405c538 100644
@@ -1232,6 +1232,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
+	uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+		mtd->oobavail : mtd->oobsize;
+
 	uint8_t *bufpoi, *oob, *buf;
 
 	stats = mtd->ecc_stats;
@@ -1282,10 +1285,11 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			buf += bytes;
 
 			if (unlikely(oob)) {
+
 				/* Raw mode does data:oob:data:oob */
 				if (ops->mode != MTD_OOB_RAW) {
 					int toread = min(oobreadlen,
-						chip->ecc.layout->oobavail);
+								max_oobsize);
 					if (toread) {
 						oob = nand_transfer_oob(chip,
 							oob, ops, toread);
Signature · 1 line
1.6.3.3
#12 lore raw

PATCH 10/17 MTD: nand: make reads using MTD_OOB_RAW affect only ECC validation

In reply to Maxim Levitsky

This changes the behavier of MTD_OOB_RAW. It used to read both OOB and data to the data buffer, however you would still need to specify the dummy oob buffer.

This is only used in one place, but makes it hard to read data+oob without ECC test, thus I removed that behavier, and fixed the user.

Now MTD_OOB_RAW behaves like MTD_OOB_PLACE, but doesn't do ECC validation

---
 drivers/mtd/nand/nand_base.c |    5 -----
 drivers/mtd/nand/nand_bbt.c  |   26 ++++++++++++++++++++++----
 include/linux/mtd/mtd.h      |    4 +---
 3 files changed, 23 insertions(+), 12 deletions(-)
drivers/mtd/nand/nand_base.c +0 -5
index 405c538..8ff36be 100644
@@ -1286,8 +1286,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			if (unlikely(oob)) {
 
-				/* Raw mode does data:oob:data:oob */
-				if (ops->mode != MTD_OOB_RAW) {
 					int toread = min(oobreadlen,
 								max_oobsize);
 					if (toread) {
@@ -1295,9 +1293,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 							oob, ops, toread);
 						oobreadlen -= toread;
 					}
-				} else
-					buf = nand_transfer_oob(chip,
-						buf, ops, mtd->oobsize);
 			}
 
 			if (!(chip->options & NAND_NO_READRDY)) {
drivers/mtd/nand/nand_bbt.c +22 -4
index 55c23e5..387c45c 100644
@@ -237,15 +237,33 @@ static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 			 size_t len)
 {
 	struct mtd_oob_ops ops;
+	int res;
 
 	ops.mode = MTD_OOB_RAW;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
-	ops.oobbuf = buf;
-	ops.datbuf = buf;
-	ops.len = len;
 
-	return mtd->read_oob(mtd, offs, &ops);
+
+	while (len > 0) {
+		if (len <= mtd->writesize) {
+			ops.oobbuf = buf + len;
+			ops.datbuf = buf;
+			ops.len = len;
+			return mtd->read_oob(mtd, offs, &ops);
+		} else {
+			ops.oobbuf = buf + mtd->writesize;
+			ops.datbuf = buf;
+			ops.len = mtd->writesize;
+			res = mtd->read_oob(mtd, offs, &ops);
+
+			if (res)
+				return res;
+		}
+
+		buf += mtd->oobsize + mtd->writesize;
+		len -= mtd->writesize;
+	}
+	return 0;
 }
 
 /*
include/linux/mtd/mtd.h +1 -3
index 662d747..84bb375 100644
@@ -61,9 +61,7 @@ struct mtd_erase_region_info {
  * MTD_OOB_PLACE:	oob data are placed at the given offset
  * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
  *			which are defined by the ecclayout
- * MTD_OOB_RAW:		mode to read raw data+oob in one chunk. The oob data
- *			is inserted into the data. Thats a raw image of the
- *			flash contents.
+ * MTD_OOB_RAW:		mode to read oob and data without doing ECC checking
  */
 typedef enum {
 	MTD_OOB_PLACE,
Signature · 1 line
1.6.3.3
#13 lore raw

PATCH 11/17 MTD: nand: fix bug that prevented write of more that one page by ->write_oob

In reply to Maxim Levitsky

Although nand_do_write_ops intends to allow such mode, it fails do do so Probably this was never tested

---
 drivers/mtd/nand/nand_base.c |   16 +++++++++-------
 1 files changed, 9 insertions(+), 7 deletions(-)
drivers/mtd/nand/nand_base.c +9 -7
index 8ff36be..29e986e 100644
@@ -1879,11 +1879,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
  * @oob:	oob data buffer
  * @ops:	oob ops structure
  */
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
-				  struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
+						struct mtd_oob_ops *ops)
 {
-	size_t len = ops->ooblen;
-
 	switch(ops->mode) {
 
 	case MTD_OOB_PLACE:
@@ -1938,6 +1936,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	int chipnr, realpage, page, blockmask, column;
 	struct nand_chip *chip = mtd->priv;
 	uint32_t writelen = ops->len;
+	uint32_t oobwritelen = ops->ooblen;
 	uint8_t *oob = ops->oobbuf;
 	uint8_t *buf = ops->datbuf;
 	int ret, subpage;
@@ -1994,8 +1993,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 			wbuf = chip->buffers->databuf;
 		}
 
-		if (unlikely(oob))
-			oob = nand_fill_oob(chip, oob, ops);
+		if (unlikely(oob)) {
+			size_t len = min(oobwritelen, mtd->oobsize);
+			oob = nand_fill_oob(chip, oob, len, ops);
+			oobwritelen -= len;
+		}
 
 		ret = chip->write_page(mtd, chip, wbuf, page, cached,
 				       (ops->mode == MTD_OOB_RAW));
@@ -2169,7 +2171,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 		chip->pagebuf = -1;
 
 	memset(chip->oob_poi, 0xff, mtd->oobsize);
-	nand_fill_oob(chip, ops->oobbuf, ops);
+	nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
 	status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
 	memset(chip->oob_poi, 0xff, mtd->oobsize);
 
Signature · 1 line
1.6.3.3
#14 lore raw

PATCH 12/17 MTD: nand: make suspend work if device is accessed by kernel threads.

In reply to Maxim Levitsky

Since all userspace threads are frozen at the time the nand_suspend is called, they aren't inside any nand function.

We don't call try_to_freeze in nand ether. Thus the only user that can be insize the nand functions is an non freezeable kernel thread.
Thus we can safely wait for it to finish.

---
 drivers/mtd/nand/nand_base.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)
drivers/mtd/nand/nand_base.c +0 -3
index 29e986e..961c98f 100644
@@ -744,9 +744,6 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 			chip->state = FL_PM_SUSPENDED;
 			spin_unlock(lock);
 			return 0;
-		} else {
-			spin_unlock(lock);
-			return -EAGAIN;
 		}
 	}
 	set_current_state(TASK_UNINTERRUPTIBLE);
Signature · 1 line
1.6.3.3
#15 lore raw

PATCH 13/17 MTD: export few functions from nand_base.c

In reply to Maxim Levitsky

This exports:

nand_do_read_oob
nand_do_write_oob
nand_get_device
nand_put_device

This functions will be used to implement custom oob based bad block handling in upcoming smartmedia common module

---
 drivers/mtd/nand/nand_base.c |   18 +++++++++---------
 include/linux/mtd/nand.h     |   12 ++++++++++++
 2 files changed, 21 insertions(+), 9 deletions(-)
drivers/mtd/nand/nand_base.c +9 -9
index 961c98f..3949d8c 100644
@@ -96,11 +96,6 @@ static struct nand_ecclayout nand_oob_128 = {
 		 .length = 78}}
 };
 
-static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
-			   int new_state);
-
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
-			     struct mtd_oob_ops *ops);
 
 /*
  * For devices which display every fart in the system on a separate LED. Is
@@ -114,7 +109,7 @@ DEFINE_LED_TRIGGER(nand_led_trigger);
  *
  * Deselect, release chip lock and wake up anyone waiting on the device
  */
-static void nand_release_device(struct mtd_info *mtd)
+void nand_release_device(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -128,6 +123,7 @@ static void nand_release_device(struct mtd_info *mtd)
 	wake_up(&chip->controller->wq);
 	spin_unlock(&chip->controller->lock);
 }
+EXPORT_SYMBOL_GPL(nand_release_device);
 
 /**
  * nand_read_byte - [DEFAULT] read one byte from the chip
@@ -721,7 +717,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
  *
  * Get the device and lock it for exclusive access
  */
-static int
+int
 nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 {
 	spinlock_t *lock = &chip->controller->lock;
@@ -753,6 +749,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 	remove_wait_queue(wq, &wait);
 	goto retry;
 }
+EXPORT_SYMBOL_GPL(nand_get_device);
 
 /**
  * panic_nand_wait - [GENERIC]  wait until the command is done
@@ -1532,7 +1529,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
  *
  * NAND read out-of-band data from the spare area
  */
-static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
 	int page, realpage, chipnr, sndcmd = 1;
@@ -1616,6 +1613,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	ops->oobretlen = ops->ooblen;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(nand_do_read_oob);
 
 /**
  * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
@@ -2108,7 +2106,7 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
  *
  * NAND write out-of-band
  */
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
 	int chipnr, page, status, len;
@@ -2179,6 +2177,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(nand_do_write_oob);
 
 /**
  * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
@@ -3080,6 +3079,7 @@ EXPORT_SYMBOL_GPL(nand_scan_ident);
 EXPORT_SYMBOL_GPL(nand_scan_tail);
 EXPORT_SYMBOL_GPL(nand_release);
 
+
 static int __init nand_base_init(void)
 {
 	led_trigger_register_simple("nand-disk", &nand_led_trigger);
include/linux/mtd/nand.h +12 -0
index ccab9df..8c2333a 100644
@@ -469,6 +469,18 @@ extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t * retlen, uint8_t * buf);
 
+extern int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+			    struct mtd_oob_ops *ops);
+
+extern int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+			     struct mtd_oob_ops *ops);
+
+extern int nand_get_device(struct nand_chip *chip,
+			struct mtd_info *mtd, int new_state);
+
+extern void nand_release_device(struct mtd_info *mtd);
+
+
 /**
  * struct platform_nand_chip - chip level device structure
  * @nr_chips:		max. number of chips to scan for
Signature · 1 line
1.6.3.3
#16 lore raw

PATCH 14/17 MTD: common module for smartmedia/xD support

In reply to Maxim Levitsky

This small module implements few helpers that are usefull for nand drivers for SmartMedia/xD card readers.

---
 drivers/mtd/nand/Kconfig     |    9 +++
 drivers/mtd/nand/Makefile    |    1 +
 drivers/mtd/nand/sm_common.c |  126 ++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/sm_common.h |   61 ++++++++++++++++++++
 4 files changed, 197 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/nand/sm_common.c
 create mode 100644 drivers/mtd/nand/sm_common.h
drivers/mtd/nand/Kconfig +9 -0
index 677cd53..13c1fb2 100644
@@ -18,6 +18,10 @@ config MTD_NAND_VERIFY_WRITE
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentally due to device wear or something else.
 
+config MTD_NAND_SMARTMEDIA
+	boolean
+	default n
+
 config MTD_NAND_ECC_SMC
 	bool "NAND ECC Smart Media byte order"
 	default n
@@ -25,6 +29,11 @@ config MTD_NAND_ECC_SMC
 	  Software ECC according to the Smart Media Specification.
 	  The original Linux implementation had byte 0 and 1 swapped.
 
+config MTD_SM_COMMON
+	select MTD_NAND_SMARTMEDIA
+	tristate
+	default n
+
 config MTD_NAND_MUSEUM_IDS
 	bool "Enable chip ids for obsolete ancient NAND devices"
 	depends on MTD_NAND
drivers/mtd/nand/Makefile +1 -0
index 1407bd1..09891f6 100644
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
+obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
 
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
drivers/mtd/nand/sm_common.c new file +126 -0

126 lines not on this page · raw message

drivers/mtd/nand/sm_common.h new file +61 -0

61 lines not on this page · raw message

Signature · 1 line
1.6.3.3
#17 lore raw

PATCH 15/17 MTD: add few workarounds to nand system for SmartMedia/xD chips.

In reply to Maxim Levitsky

* Add an option NAND_SMARTMEDIA that can be set by nand driver If set, it will cause separate ID table to be used, which includes mask rom devices and new xD cards

* Workaround for wrong write protect status on some xD cards

---
 drivers/mtd/nand/nand_base.c |   30 ++++++++++++++++++++++--------
 drivers/mtd/nand/nand_ids.c  |   39 +++++++++++++++++++++++++++++++++++++++
 include/linux/mtd/nand.h     |   11 +++++++++++
 3 files changed, 72 insertions(+), 8 deletions(-)
drivers/mtd/nand/nand_base.c +22 -8
index 3949d8c..093b868 100644
@@ -397,9 +397,18 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 static int nand_check_wp(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
+	int wp;
+
+	/* broken xD cards report WP despite beeing writable */
+	if (chip->options & NAND_BROKEN_XD)
+		return 0;
+
 	/* Check the WP bit */
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-	return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
+	wp = (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
+
+
+	return wp;
 }
 
 /**
@@ -2622,14 +2631,18 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	}
 
 	/* Lookup the flash id */
-	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-		if (dev_id == nand_flash_ids[i].id) {
-			type =  &nand_flash_ids[i];
+#ifdef CONFIG_MTD_NAND_SMARTMEDIA
+	if (chip->options & NAND_SMARTMEDIA)
+		type = nand_smartmedia_flash_ids;
+	else
+#endif
+		type = nand_flash_ids;
+
+	for (i = 0; type->name != NULL; type++)
+		if (dev_id == type->id)
 			break;
-		}
-	}
 
-	if (!type)
+	if (!type->name)
 		return ERR_PTR(-ENODEV);
 
 	if (!mtd->name)
@@ -2986,7 +2999,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	/* Fill in remaining MTD driver data */
 	mtd->type = MTD_NANDFLASH;
-	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->flags = chip->options & NAND_ROM ? MTD_CAP_ROM :
+							MTD_CAP_NANDFLASH;
 	mtd->erase = nand_erase;
 	mtd->point = NULL;
 	mtd->unpoint = NULL;
drivers/mtd/nand/nand_ids.c +39 -0
index 69ee2c9..f9e72d5 100644
@@ -127,6 +127,45 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{NULL,}
 };
 
+#ifdef CONFIG_MTD_NAND_SMARTMEDIA
+struct nand_flash_dev nand_smartmedia_flash_ids[] = {
+
+	/* SmartMedia */
+	{"SmartMedia 1MiB 5V",		0x6e, 256, 1, 0x1000, 0},
+	{"SmartMedia 1MiB 3,3V",	0xe8, 256, 1, 0x1000, 0},
+	{"SmartMedia 1MiB 3,3V",	0xec, 256, 1, 0x1000, 0},
+	{"SmartMedia 2MiB 3,3V",	0xea, 256, 2, 0x1000, 0},
+	{"SmartMedia 2MiB 5V",		0x64, 256, 2, 0x1000, 0},
+	{"SmartMedia 2MiB 3,3V ROM",	0x5d, 512, 2, 0x2000, NAND_ROM},
+	{"SmartMedia 4MiB 3,3V",	0xe3, 512, 4, 0x2000, 0},
+	{"SmartMedia 4MiB 3,3/5V",	0xe5, 512, 4, 0x2000, 0},
+	{"SmartMedia 4MiB 5V",		0x6b, 512, 4, 0x2000, 0},
+	{"SmartMedia 4MiB 3,3V ROM",	0xd5, 512, 4, 0x2000, NAND_ROM},
+	{"SmartMedia 8MiB 3,3V",	0xe6, 512, 8, 0x2000, 0},
+	{"SmartMedia 8MiB 3,3V ROM",	0xd6, 512, 8, 0x2000, NAND_ROM},
+
+#define XD_TYPEM	(NAND_NO_AUTOINCR | NAND_BROKEN_XD)
+	/* xD / SmartMedia */
+	{"SmartMedia/xD 16MiB 3,3V",	0x73, 512, 16, 0x4000, 0},
+	{"SmartMedia 16MiB 3,3V ROM",	0x57, 512, 16, 0x4000, NAND_ROM},
+	{"SmartMedia/xD 32MiB 3,3V",	0x75, 512, 32, 0x4000, 0},
+	{"SmartMedia 32MiB 3,3V ROM",	0x58, 512, 32, 0x4000, NAND_ROM},
+	{"SmartMedia/xD 64MiB 3,3V",	0x76, 512, 64, 0x4000, 0},
+	{"SmartMedia 64MiB 3,3V ROM",	0xd9, 512, 64, 0x4000, NAND_ROM},
+	{"SmartMedia/xD 128MiB 3,3V",	0x79, 512, 128, 0x4000, 0},
+	{"SmartMedia 128MiB 3,3V ROM",	0xda, 512, 128, 0x4000, NAND_ROM},
+	{"SmartMedia/xD 256MiB 3,3V",	0x71, 512, 256, 0x4000, XD_TYPEM},
+	{"SmartMedia 256MiB 3,3V ROM",	0x5b, 512, 256, 0x4000, NAND_ROM},
+
+	/* xD only */
+	{"xD 512MiB 3,3V",		0xDC, 512, 512, 0x4000, XD_TYPEM},
+	{"xD 1GiB 3,3V",		0xD3, 512, 1024, 0x4000, XD_TYPEM},
+	{"xD 2GiB 3,3V",		0xD5, 512, 2048, 0x4000, XD_TYPEM},
+	{NULL,}
+};
+EXPORT_SYMBOL(nand_smartmedia_flash_ids);
+#endif
+
 /*
 *	Manufacturer ID list
 */
include/linux/mtd/nand.h +11 -0
index 8c2333a..bb25cd8 100644
@@ -170,6 +170,12 @@ typedef enum {
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
 
+/* Device is one of 'new' xD cards that expose fake nand command set */
+#define NAND_BROKEN_XD		0x00000400
+
+/* Device behaves just like nand, but is readonly */
+#define NAND_ROM		0x00000800
+
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
 	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
@@ -195,9 +201,13 @@ typedef enum {
 /* This option is defined if the board driver allocates its own buffers
    (e.g. because it needs them DMA-coherent */
 #define NAND_OWN_BUFFERS	0x00040000
+
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV	0x00080000
 
+/* controller supports only xD/SmartMedia cards*/
+#define NAND_SMARTMEDIA		0x00100000
+
 /* Options set by nand scan */
 /* Nand scan has allocated controller struct */
 #define NAND_CONTROLLER_ALLOC	0x80000000
@@ -458,6 +468,7 @@ struct nand_manufacturers {
 };
 
 extern struct nand_flash_dev nand_flash_ids[];
+extern struct nand_flash_dev nand_smartmedia_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
 extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
Signature · 1 line
1.6.3.3
#18 lore raw

PATCH 16/17 MTD: Add nand driver for ricoh xD/SmartMedia reader

In reply to Maxim Levitsky

This adds a driver for Ricoh xD card reader with PCI id 0x0852

Since the reader is a part of larger mulifunction chip, it is hard to determine the correct model name. Might be R5C852.

Driver is complete, but bewere of the fact that some (probably only type M) xD cards are 'fake' which means that they have an on board CPU and expose emulated nand command set

These cards don't even store the oob area on the flash, but generate it on the fly from something else.

Thus they demand to have proper values written in the oob area, and therefore only useful with SmartMedia FTL.

---
 MAINTAINERS               |    6 +
 drivers/mtd/nand/Kconfig  |   11 +
 drivers/mtd/nand/Makefile |    1 +
 drivers/mtd/nand/r822.c   | 1105 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/r822.h   |  153 +++++++
 include/linux/pci_ids.h   |    2 +
 6 files changed, 1278 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/nand/r822.c
 create mode 100644 drivers/mtd/nand/r822.h
MAINTAINERS +6 -0
index dd079bd..d553b96 100644
@@ -4574,6 +4574,12 @@ S:	Maintained
 F:	Documentation/rfkill.txt
 F:	net/rfkill/
 
+RICOH SMARTMEDIA/XD DRIVER
+M:	Maxim Levitsky <[email protected]>
+S:	Maintained
+F:	drivers/mtd/nand/r822.c
+F:	drivers/mtd/nand/r822.h
+
 RISCOM8 DRIVER
 S:	Orphan
 F:	Documentation/serial/riscom8.txt
drivers/mtd/nand/Kconfig +11 -0
index 13c1fb2..20803fa 100644
@@ -113,6 +113,17 @@ config MTD_NAND_TS7250
 config MTD_NAND_IDS
 	tristate
 
+config MTD_NAND_RICOH
+	tristate "Ricoh xD card reader"
+	default n
+	select MTD_SM_COMMON
+	help
+	  Enable support for Ricoh xD card reader
+	  You also need to enable ether
+	  NAND SSFDC (SmartMedia) read only translation layer' or new
+	  expermental, readwrite
+	  'SmartMedia/xD new translation layer'
+
 config MTD_NAND_AU1550
 	tristate "Au1550/1200 NAND support"
 	depends on SOC_AU1200 || SOC_AU1550
drivers/mtd/nand/Makefile +1 -0
index 09891f6..dc7c0bb 100644
@@ -43,5 +43,6 @@ obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
 obj-$(CONFIG_MTD_NAND_W90P910)		+= w90p910_nand.o
 obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
+obj-$(CONFIG_MTD_NAND_RICOH)		+= r822.o
 
 nand-objs := nand_base.o nand_bbt.o
drivers/mtd/nand/r822.c new file +1105 -0

1,105 lines not on this page · raw message

drivers/mtd/nand/r822.h new file +153 -0

153 lines not on this page · raw message

include/linux/pci_ids.h +2 -0
index cca8a04..cef49f2 100644
@@ -1523,6 +1523,8 @@
 #define PCI_DEVICE_ID_RICOH_R5C822	0x0822
 #define PCI_DEVICE_ID_RICOH_R5C832	0x0832
 #define PCI_DEVICE_ID_RICOH_R5C843	0x0843
+#define PCI_DEVICE_ID_RICOH_R5C852	0x0852
+
 
 #define PCI_VENDOR_ID_DLINK		0x1186
 #define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
Signature · 1 line
1.6.3.3
#19 lore raw

PATCH 17/17 MTD: Add new SmartMedia/xD FTL

In reply to Maxim Levitsky

This implements new readwrite SmartMedia/xd FTL.

mtd driver must have support proper ECC and badblock vertification based on oob parts for 512 bytes nand.

Also mtd driver must define read_oob and write_oob, which are used to read and write both data and oob together.

---
 drivers/mtd/Kconfig  |   21 +
 drivers/mtd/Makefile |    1 +
 drivers/mtd/sm_ftl.c | 1260 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/sm_ftl.h |   92 ++++
 4 files changed, 1374 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/sm_ftl.c
 create mode 100644 drivers/mtd/sm_ftl.h
drivers/mtd/Kconfig +21 -0
index ecf90f5..0105ae0 100644
@@ -304,6 +304,27 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
+
+config SM_FTL
+	tristate "SmartMedia/xD new translation layer"
+	depends on EXPERIMENTAL && BLOCK
+	select MTD_BLKDEVS
+	help
+	  This enables new and very EXPERMENTAL support for SmartMedia/xD
+	  FTL (Flash tanslation layer)
+	  Write support isn't yet well tested, therefore this code IS likely to
+	  eat your card, so please don't use it together with valuable data.
+	  Use readonly driver (CONFIG_SSFDC) instead.
+
+config SM_FTL_MUSEUM
+	boolean "Additional Support for 1MB and 2MB SmartMedia cards"
+	depends on SM_FTL && MTD_NAND
+	select MTD_NAND_ECC_SMC
+	help
+	  Very old SmartMedia cards need ECC to be caluculated in the FTL
+	  Such cards are very rare, thus enabling this option is mostly useless
+	  Also this support is completely UNTESTED.
+
 config MTD_OOPS
 	tristate "Log panic/oops to an MTD buffer"
 	depends on MTD
drivers/mtd/Makefile +1 -0
index 82d1e4d..d53357b 100644
@@ -24,6 +24,7 @@ obj-$(CONFIG_NFTL)		+= nftl.o
 obj-$(CONFIG_INFTL)		+= inftl.o
 obj-$(CONFIG_RFD_FTL)		+= rfd_ftl.o
 obj-$(CONFIG_SSFDC)		+= ssfdc.o
+obj-$(CONFIG_SM_FTL)		+= sm_ftl.o
 obj-$(CONFIG_MTD_OOPS)		+= mtdoops.o
 
 nftl-objs		:= nftlcore.o nftlmount.o
drivers/mtd/sm_ftl.c new file +1260 -0

1,260 lines not on this page · raw message

drivers/mtd/sm_ftl.h new file +92 -0

92 lines not on this page · raw message

Signature · 1 line
1.6.3.3
#20 lore raw

PATCH 1/1 MTD: Add new SmartMedia/xD FTL

Drat... forgot to compile....
This is an updated version
(This time compile and run tested with xd card)

---
This implements new readwrite SmartMedia/xd FTL.

mtd driver must have support proper ECC and badblock vertification based on oob parts for 512 bytes nand.

Also mtd driver must define read_oob and write_oob, which are used to read and write both data and oob together.

---
 drivers/mtd/Kconfig  |   21 +
 drivers/mtd/Makefile |    1 +
 drivers/mtd/sm_ftl.c | 1258 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/sm_ftl.h |   92 ++++
 4 files changed, 1372 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/sm_ftl.c
 create mode 100644 drivers/mtd/sm_ftl.h
drivers/mtd/Kconfig +21 -0
index ecf90f5..0105ae0 100644
@@ -304,6 +304,27 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
+
+config SM_FTL
+	tristate "SmartMedia/xD new translation layer"
+	depends on EXPERIMENTAL && BLOCK
+	select MTD_BLKDEVS
+	help
+	  This enables new and very EXPERMENTAL support for SmartMedia/xD
+	  FTL (Flash tanslation layer)
+	  Write support isn't yet well tested, therefore this code IS likely to
+	  eat your card, so please don't use it together with valuable data.
+	  Use readonly driver (CONFIG_SSFDC) instead.
+
+config SM_FTL_MUSEUM
+	boolean "Additional Support for 1MB and 2MB SmartMedia cards"
+	depends on SM_FTL && MTD_NAND
+	select MTD_NAND_ECC_SMC
+	help
+	  Very old SmartMedia cards need ECC to be caluculated in the FTL
+	  Such cards are very rare, thus enabling this option is mostly useless
+	  Also this support is completely UNTESTED.
+
 config MTD_OOPS
 	tristate "Log panic/oops to an MTD buffer"
 	depends on MTD
drivers/mtd/Makefile +1 -0
index 82d1e4d..d53357b 100644
@@ -24,6 +24,7 @@ obj-$(CONFIG_NFTL)		+= nftl.o
 obj-$(CONFIG_INFTL)		+= inftl.o
 obj-$(CONFIG_RFD_FTL)		+= rfd_ftl.o
 obj-$(CONFIG_SSFDC)		+= ssfdc.o
+obj-$(CONFIG_SM_FTL)		+= sm_ftl.o
 obj-$(CONFIG_MTD_OOPS)		+= mtdoops.o
 
 nftl-objs		:= nftlcore.o nftlmount.o
drivers/mtd/sm_ftl.c new file +1258 -0

1,258 lines not on this page · raw message

drivers/mtd/sm_ftl.h new file +92 -0

92 lines not on this page · raw message

Signature · 1 line
1.6.3.3