Skip to contentSkip to conversation

oxnas: remove support for oxnas machine

PATCH In review Steffen Sledz 1 participant 2 messages Feb 2, 2010 – Feb 4, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 oxnas: remove support for oxnas machine

OXNAS machine was only used as prototyp for HIPOX machine and is not needed any longer. Because of constant build problems support is finished.

---
 conf/machine/oxnas.conf                            |   20 -
 recipes/linux/linux-2.6.24/oxnas/defconfig         | 1232 -
 .../oxnas/oxnas-pci-config-delay.patch             |   56 -
 .../linux-2.6.24/oxnas/oxnas-pci-max-size.patch    |   21 -
 recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch  |  176 -
 recipes/linux/linux-2.6.24/oxnas/oxnas.diff        |57804 --------------------
 recipes/linux/linux_2.6.24.bb                      |    8 -
 recipes/u-boot/u-boot-1.1.2/oxnas.patch            | 7257 ---
 recipes/u-boot/u-boot_1.1.2.bb                     |    2 -
 9 files changed, 0 insertions(+), 66576 deletions(-)
 delete mode 100644 conf/machine/oxnas.conf
 delete mode 100644 recipes/linux/linux-2.6.24/oxnas/defconfig
 delete mode 100644 recipes/linux/linux-2.6.24/oxnas/oxnas-pci-config-delay.patch
 delete mode 100644 recipes/linux/linux-2.6.24/oxnas/oxnas-pci-max-size.patch
 delete mode 100644 recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch
 delete mode 100644 recipes/linux/linux-2.6.24/oxnas/oxnas.diff
 delete mode 100644 recipes/u-boot/u-boot-1.1.2/oxnas.patch
conf/machine/oxnas.conf deleted +0 -20
deleted file mode 100644
index 0821329..0000000
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: OXE810(D)SE NAS devices
-#@DESCRIPTION: Machine configuration for Oxford OXE810(D)SE NAS devices http://www.oxsemi.com/products/storage/nas.html
-
-TARGET_ARCH = "arm"
-
-MACHINE_FEATURES = "kernel26 ext2 pci usbhost ethernet serial raid uboot"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-
-KERNEL_IMAGETYPE = "uImage"
-
-PREFERRED_VERSION_u-boot = "1.1.2"
-UBOOT_LOADADDRESS = "0x48008000"
-UBOOT_ENTRYPOINT = "0x48008000"
-UBOOT_ARCH = "arm"
-
-require conf/machine/include/tune-arm926ejs.inc
recipes/linux/linux-2.6.24/oxnas/defconfig deleted +0 -1232

1,232 lines not on this page · raw message

recipes/linux/linux-2.6.24/oxnas/oxnas-pci-config-delay.patch deleted +0 -56

56 lines not on this page · raw message

recipes/linux/linux-2.6.24/oxnas/oxnas-pci-max-size.patch deleted +0 -21
deleted file mode 100644
index 89af49b..0000000
@@ -1,21 +0,0 @@
-diff -Nurd linux-2.6.24.orig//arch/arm/mach-oxnas/pci.c linux-2.6.24/arch/arm/mach-oxnas/pci.c
---- linux-2.6.24.orig//arch/arm/mach-oxnas/pci.c	2009-03-10 20:29:02.000000000 +0100
-+++ linux-2.6.24/arch/arm/mach-oxnas/pci.c	2009-03-10 21:10:47.000000000 +0100
-@@ -78,12 +78,14 @@
- static unsigned long pci_trhfa_timeout = 0;
- #endif // CONFIG_OXNAS_PCI_RESET
- 
-+// processor allows up to 8MB PCI address ranges maximum by design
-+// we split this up to 4MB prefetchable and 4MB non-prefetchable
-+
- #define PCI_BUS_NONMEM_START			0x00000000
--#define PCI_BUS_NONMEM_SIZE	    		0x00080000
--                               
-+#define PCI_BUS_NONMEM_SIZE	    		0x00400000
-                                
- #define PCI_BUS_PREMEM_START			PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE
--#define PCI_BUS_PREMEM_SIZE	    		0x00080000
-+#define PCI_BUS_PREMEM_SIZE	    		0x00400000
- 
- #define SYNOPSYS_PCI_MEMORY_BASE_ADDRESS        PCI_BASE_ADDRESS_0
- #define SYNOPSYS_PCI_DUAL_CYCLE_BASE_ADDRESS    PCI_BASE_ADDRESS_2
recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch deleted +0 -176

176 lines not on this page · raw message

recipes/linux/linux-2.6.24/oxnas/oxnas.diff deleted +0 -57804

1,495 lines not on this page · raw message

recipes/linux/linux_2.6.24.bb +0 -8
index ecaf5d7..31a8a04 100644

Lines of this file are not shown. View the raw message.

recipes/u-boot/u-boot-1.1.2/oxnas.patch deleted +0 -7257

7,257 lines not on this page · raw message

recipes/u-boot/u-boot_1.1.2.bb +0 -2
index c83e31f..8287d35 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.4.2

Part of the diff is not shown here. View the raw message.

#1 lore raw
Quoted 3 lines · Steffen Sledz

OXNAS machine was only used as prototyp for HIPOX machine and is not needed any longer. Because of constant build problems support is finished.

no NAKs for a few days (what i expected) --> patch applied