Add minimal support for DevKit8000
Subsystems (3)
PATCH v2 1/4 Add minimal support for DevKit8000
These patches add board support for the Timll DevKit8000.
The DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface.
--- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-devkit8000.c | 691 ++++++++++++++++++++++++++++++++ 3 files changed, 697 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-devkit8000.c
arch/arm/mach-omap2/Kconfig +4 -0
@@ -58,6 +58,10 @@ config MACH_OMAP3_BEAGLE depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB +config MACH_DEVKIT8000 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3
arch/arm/mach-omap2/Makefile +2 -0
@@ -91,6 +91,8 @@ obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \ obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ hsmmc.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ + hsmmc.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \
arch/arm/mach-omap2/board-devkit8000.c new file +691 -0
691 lines not on this page · raw message
Signature · 1 line
1.6.4.4
Tony Lindgren
maintainerPATCH v2 1/4 Add minimal support for DevKit8000
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: for-next
Initial commit ID (Likely to change): 2c3dc8e6bc77782f3d855653b9df4445572c1914
PatchWorks
http://patchwork.kernel.org/patch/77078/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=2c3dc8e6bc77782f3d855653b9df4445572c1914