OMAP: DSS: Add Innolux 7" display for DevKit8000
PATCH v2 4/4 OMAP: DSS: Add Innolux 7" display for DevKit8000
This patch adds the 7 inch display Innolux AT070TN83 for the DevKit8000 with DSS2 interface.
Signed-off-by Thomas Weber <[email protected]>
--- drivers/video/omap2/displays/Kconfig | 8 ++- drivers/video/omap2/displays/Makefile | 1 + .../video/omap2/displays/panel-innolux-at070tn83.c | 109 ++++++++++++++++++++ 3 files changed, 117 insertions(+), 1 deletions(-) create mode 100644 drivers/video/omap2/displays/panel-innolux-at070tn83.c
drivers/video/omap2/displays/Kconfig +7 -1
@@ -5,7 +5,7 @@ config PANEL_GENERIC tristate "Generic Panel" help Generic panel driver. - Used for DVI output for Beagle and OMAP3 SDP. + Used for DVI output for Beagle, Devkit8000 and OMAP3 SDP. config PANEL_SHARP_LS037V7DW01 tristate "Sharp LS037V7DW01 LCD Panel"
@@ -13,6 +13,12 @@ config PANEL_SHARP_LS037V7DW01 help LCD Panel used in TI's SDP3430 and EVM boards +config PANEL_INNOLUX_AT070TN83 + tristate "Innolux AT070TN83 LCD Panel" + depends on OMAP2_DSS + help + LCD Panel used in TimLL's Devkit8000 + config PANEL_TAAL tristate "Taal DSI Panel" depends on OMAP2_DSS_DSI
drivers/video/omap2/displays/Makefile +1 -0
@@ -2,3 +2,4 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o +obj-$(CONFIG_PANEL_INNOLUX_AT070TN83) += panel-innolux-at070tn83.o
drivers/video/omap2/displays/panel-innolux-at070tn83.c new file +109 -0
109 lines not on this page · raw message
Signature · 1 line
1.6.4.4