Skip to contentSkip to conversation

HPET: Drop WARN_ON for mismatch on HPET CMP readback

PATCH In review Andi Kleen 3 participants 5 messages Feb 4, 2010

Subsystems (2)
lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/1 HPET: Drop WARN_ON for mismatch on HPET CMP readback

HPET: Drop WARN_ON for mismatch on HPET CMP readback

At least one Intel chipset seems to always return a constant value when reading back the HPET CMP register. This triggers the WARN_ON_ONCE on each boot.

In addition the WARN_ON was buggy: it has a side-effect and actually needed code could be optimized out if someone disabled CONFIG_BUG.

So far there's no indication that miscompare on reading points to actual problem.

So simply drop the WARN_ON_ONCE.

Based on discussions with Thomas Gleixner.

arch/x86/kernel/hpet.c +4 -7
index ad80a1c..18cf7a6 100644
@@ -394,14 +394,11 @@ static int hpet_next_event(unsigned long delta,
 	 * at that point and we would wait for the next hpet interrupt
 	 * forever. We found out that reading the CMP register back
 	 * forces the transfer so we can rely on the comparison with
-	 * the counter register below. If the read back from the
-	 * compare register does not match the value we programmed
-	 * then we might have a real hardware problem. We can not do
-	 * much about it here, but at least alert the user/admin with
-	 * a prominent warning.
+	 * the counter register below. 
+         * But don't actually check the read-back value. Some Intel chipsets
+	 * return always the same value.
 	 */
-	WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
-		  KERN_WARNING "hpet: compare register read back failed.\n");
+	(void)hpet_readl(HPET_Tn_CMP(timer);
 
 	return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
#1 lore raw
Quoted 5 lines · Andi Kleen

HPET: Drop WARN_ON for mismatch on HPET CMP readback

At least one Intel chipset seems to always return a constant value when reading back the HPET CMP register. This triggers the WARN_ON_ONCE on each boot.

I don't know of chipset returning a constant value. Which chipset is this one?
There is a chipset ICH9/10 errata where it returns a previous value, instead of most recently written value. I had a patch for that here.

http://marc.info/?l=linux-kernel&m=125849385330302&w=2

I wanted to send out final patch with a pointer to ICH9/10 spec update which describes the errata. But, look like that spec update hasn't happened yet. As we found issue with atleast one chipset with this warn_on, I would prefer retaining it, with a fix like above.

Thanks,
Venki

author
#2 lore raw
Quoted 9 lines · Venkatesh
Quoted 5 lines · Andi Kleen

HPET: Drop WARN_ON for mismatch on HPET CMP readback

At least one Intel chipset seems to always return a constant value when reading back the HPET CMP register. This triggers the WARN_ON_ONCE on each boot.

I don't know of chipset returning a constant value. Which chipset is this one?

Ibex Peak. That is I'm not sure it's fully constant, but at least it's always the same value on the HPET read triggering on boot.

Quoted 7 lines

http://marc.info/?l=linux-kernel&m=125849385330302&w=2

I wanted to send out final patch with a pointer to ICH9/10 spec update which describes the errata. But, look like that spec update hasn't happened yet. As we found issue with atleast one chipset with this warn_on, I would prefer retaining it, with a fix like above.

Ok fine for me. I only really care that the ugly backtrace goes away.

-Andi

Signature · 1 line
[email protected] -- Speaking for myself only.
#3 lore raw
Quoted 8 lines · Andi Kleen
Quoted 7 lines · Venkatesh
Quoted 5 lines · Andi Kleen

HPET: Drop WARN_ON for mismatch on HPET CMP readback

At least one Intel chipset seems to always return a constant value when reading back the HPET CMP register. This triggers the WARN_ON_ONCE on each boot.

Quoted 5 lines
Quoted 2 lines

I don't know of chipset returning a constant value. Which chipset is this one?

Ibex Peak. That is I'm not sure it's fully constant, but at least it's always the same value on the HPET read triggering on boot.

OK. Yes. Ibexpeak is the same problem as ICH9, with reads not returning the most recent write.

Thanks,
Venki

#4 lore raw
Quoted 9 lines · Venkatesh
Quoted 8 lines · Andi Kleen
Quoted 7 lines · Venkatesh
Quoted 5 lines · Andi Kleen

HPET: Drop WARN_ON for mismatch on HPET CMP readback

At least one Intel chipset seems to always return a constant value when reading back the HPET CMP register. This triggers the WARN_ON_ONCE on each boot.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

I don't know of chipset returning a constant value. Which chipset is this one?

Ibex Peak. That is I'm not sure it's fully constant, but at least it's always the same value on the HPET read triggering on boot.

OK. Yes. Ibexpeak is the same problem as ICH9, with reads not returning the most recent write.

OTOH, none of the modern chipsets needs (hopefully) the read back to avoid that missing interrupt issue which we saw on ATI.

So we could quite well do without the read back operation and save a fair amount of cpu cycles that way. We can make it mandatory on those ATI chips and have a command line option which helps us to debug fallout or new problem cases.

Thanks,

tglx