Skip to contentSkip to conversation

Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.

PATCH In review Nick Pelly 5 participants 14 messages Feb 11, 2010 – Mar 19, 2010

Subsystems (2)
lore
Share & tools
lore

Nick Pelly

author
#0 lore raw

PATCH 1/1 Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise selection of SCO/eSCO packet types as per the Packet_Type parameter in HCI Setup Synchrnous Connection Command.

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may not be used.
0x0080 3-EV3 may not be used.
0x0100 2-EV5 may not be used.
0x0200 3-EV5 may not be used.

We've followed the Bluetooth SIG convention of reversing the logic on the EDR bits.

Packet type selection is just a request made to the Bluetooth chipset, and it is up to the link manager on the chipset to negiotiate and decide on the actual packet types used. Furthermore, when a SCO/eSCO connection is eventually made there is no way for the host stack to determine which packet type was used (however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

Typically userspace just wants to select eSCO or SCO packet types, which can be done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS will be selected as default.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain a blacklist of packet types to workaround broken remote devices such as these.

---
 include/net/bluetooth/hci.h      |    7 +++-
 include/net/bluetooth/hci_core.h |    7 +++-
 include/net/bluetooth/sco.h      |    4 ++-
 net/bluetooth/hci_conn.c         |   25 +++++++++------
 net/bluetooth/hci_event.c        |    6 ++-
 net/bluetooth/l2cap.c            |    2 +-
 net/bluetooth/sco.c              |   61 +++++++++++++++++++++++++------------
 7 files changed, 74 insertions(+), 38 deletions(-)
include/net/bluetooth/hci.h +5 -2
index 4f7795f..72efc94 100644
@@ -139,8 +139,11 @@ enum {
 #define ESCO_2EV5	0x0100
 #define ESCO_3EV5	0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK	(ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK	(ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+#define ALL_SCO_PKTS	(SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS	(SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
 /* ACL flags */
 #define ACL_START		0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
 void hci_add_sco(struct hci_conn *conn, __u16 handle);
 void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst);
 int hci_conn_del(struct hci_conn *conn);
 void hci_conn_hash_flush(struct hci_dev *hdev);
 void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst,
+					__u8 sec_level, __u8 auth_type);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);
include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
 	sa_family_t	sco_family;
 	bdaddr_t	sco_bdaddr;
+	__u16		sco_pkt_type;
 };
 
 /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
 struct sco_pinfo {
 	struct bt_sock	bt;
-	__u32		flags;
+	__u16		pkt_type;
+
 	struct sco_conn	*conn;
 };
 
net/bluetooth/hci_conn.c +15 -10
index fa8b412..8ced057 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
 	hci_conn_enter_sniff_mode(conn);
 }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst)
 {
 	struct hci_conn *conn;
 
@@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
 		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 		break;
 	case SCO_LINK:
+		if (!pkt_type)
+			pkt_type = ALL_SCO_PKTS;
+	case ESCO_LINK:
+		if (!pkt_type)
+			pkt_type = ALL_ESCO_PKTS;
 		if (lmp_esco_capable(hdev))
-			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-					(hdev->esco_type & EDR_ESCO_MASK);
+			conn->pkt_type = pkt_type & hdev->esco_type;
 		else
-			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-		break;
-	case ESCO_LINK:
-		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+			conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+					SCO_PTYPE_MASK;
 		break;
 	}
 
@@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
 
 /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst,
+					__u8 sec_level, __u8 auth_type)
 {
 	struct hci_conn *acl;
 	struct hci_conn *sco;
@@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 	BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
 	if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-		if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+		if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
 			return NULL;
 	}
 
@@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 		return acl;
 
 	if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-		if (!(sco = hci_conn_add(hdev, type, dst))) {
+		if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
 			hci_conn_put(acl);
 			return NULL;
 		}
net/bluetooth/hci_event.c +4 -2
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
 		}
 	} else {
 		if (!conn) {
-			conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
+			conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
 			if (conn) {
 				conn->out = 1;
 				conn->link_mode |= HCI_LM_MASTER;
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
 		conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
 		if (!conn) {
-			if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+			/* pkt_type not yet used for incoming connections */
+			if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+							&ev->bdaddr))) {
 				BT_ERR("No memmory for new connection");
 				hci_dev_unlock(hdev);
 				return;
net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
 		}
 	}
 
-	hcon = hci_connect(hdev, ACL_LINK, dst,
+	hcon = hci_connect(hdev, ACL_LINK, 0, dst,
 					l2cap_pi(sk)->sec_level, auth_type);
 	if (!hcon)
 		goto done;
net/bluetooth/sco.c +41 -20

118 lines not on this page · raw message

Signature · 1 line
1.6.5.3
author
#1 lore raw
Quoted 345 lines · Nick Pelly

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise selection of SCO/eSCO packet types as per the Packet_Type parameter in HCI Setup Synchrnous Connection Command.

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may not be used.
0x0080 3-EV3 may not be used.
0x0100 2-EV5 may not be used.
0x0200 3-EV5 may not be used.

We've followed the Bluetooth SIG convention of reversing the logic on the EDR bits.

Packet type selection is just a request made to the Bluetooth chipset, and it is up to the link manager on the chipset to negiotiate and decide on the actual packet types used. Furthermore, when a SCO/eSCO connection is eventually made there is no way for the host stack to determine which packet type was used (however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

Typically userspace just wants to select eSCO or SCO packet types, which can be done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS will be selected as default.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain a blacklist of packet types to workaround broken remote devices such as these.

---
 include/net/bluetooth/hci.h      |    7 +++- include/net/bluetooth/hci_core.h |    7 +++- include/net/bluetooth/sco.h      |    4 ++- net/bluetooth/hci_conn.c         |   25 +++++++++------ net/bluetooth/hci_event.c        |    6 ++- net/bluetooth/l2cap.c            |    2 +-
 net/bluetooth/sco.c              |   61 +++++++++++++++++++++++++------------

 7 files changed, 74 insertions(+), 38 deletions(-)
include/net/bluetooth/hci.h +5 -2
index 4f7795f..72efc94 100644
@@ -139,8 +139,11 @@ enum {
  #define ESCO_2EV5      0x0100
  #define ESCO_3EV5      0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
  /* ACL flags */
  #define ACL_START              0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
  void hci_add_sco(struct hci_conn *conn, __u16 handle);
  void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst);
  int hci_conn_del(struct hci_conn *conn);
  void hci_conn_hash_flush(struct hci_dev *hdev);
  void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type);
  int hci_conn_check_link_mode(struct hci_conn *conn);
  int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
  int hci_conn_change_link_key(struct hci_conn *conn);
include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
  struct sockaddr_sco {
        sa_family_t     sco_family;
        bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
  };
 
  /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
  struct sco_pinfo {
        struct bt_sock  bt;
-       __u32           flags;
+       __u16           pkt_type;
+
        struct sco_conn *conn;
  };
 
net/bluetooth/hci_conn.c +2 -1
index fa8b412..8ced057 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
        hci_conn_enter_sniff_mode(conn);
  }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst)
  {
        struct hci_conn *conn;
 
@@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
                conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
                break;

       case SCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_SCO_PKTS;
+       case ESCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_ESCO_PKTS;
               if (lmp_esco_capable(hdev))
-                       conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-                                       (hdev->esco_type & EDR_ESCO_MASK);
+                       conn->pkt_type = pkt_type & hdev->esco_type; else
-                       conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-               break;
-       case ESCO_LINK:
-               conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+                       conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+                                       SCO_PTYPE_MASK;
               break;
       }

net/bluetooth/hci_conn.c +5 -3
@@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
 
  /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type)
  {
        struct hci_conn *acl;
        struct hci_conn *sco;
@@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
        BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
        if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-               if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+               if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
                        return NULL;
        }
 
@@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
                return acl;
 
        if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-               if (!(sco = hci_conn_add(hdev, type, dst))) {
+               if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
                        hci_conn_put(acl);
                        return NULL;
                }
net/bluetooth/hci_event.c +4 -2
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
                }
        } else {
                if (!conn) {
-                       conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
+                       conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
                        if (conn) {
                                conn->out = 1;
                                conn->link_mode |= HCI_LM_MASTER;
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
                conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
                if (!conn) {
-                       if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+                       /* pkt_type not yet used for incoming connections */
+                       if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+                                                       &ev->bdaddr))) {
                                BT_ERR("No memmory for new connection");
                                hci_dev_unlock(hdev);
                                return;
net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
                }
        }
 
-       hcon = hci_connect(hdev, ACL_LINK, dst,
+       hcon = hci_connect(hdev, ACL_LINK, 0, dst,
                                        l2cap_pi(sk)->sec_level, auth_type);
        if (!hcon)
                goto done;
net/bluetooth/sco.c +41 -21
index 77f4153..4976ad5 100644
@@ -176,6 +176,7 @@ static int sco_connect(struct sock *sk)
  {
        bdaddr_t *src = &bt_sk(sk)->src;
        bdaddr_t *dst = &bt_sk(sk)->dst;
+       __u16 pkt_type = sco_pi(sk)->pkt_type;
        struct sco_conn *conn;
        struct hci_conn *hcon;
        struct hci_dev  *hdev;
@@ -192,10 +193,14 @@ static int sco_connect(struct sock *sk)
 
        if (lmp_esco_capable(hdev) && !disable_esco)
                type = ESCO_LINK;
-       else
+       else {
                type = SCO_LINK;
+               pkt_type &= SCO_ESCO_MASK;
+               pkt_type |= EDR_ESCO_MASK;
+       }
 
-       hcon = hci_connect(hdev, type, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
+       hcon = hci_connect(hdev, type, pkt_type, dst,
+                                       BT_SECURITY_LOW, HCI_AT_NO_BONDING);
        if (!hcon)
                goto done;
 
@@ -451,18 +456,22 @@ static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
        return 0;
  }
 
-static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
+       struct sockaddr_sco sa;
        struct sock *sk = sock->sk;
-       bdaddr_t *src = &sa->sco_bdaddr;
-       int err = 0;
+       bdaddr_t *src = &sa.sco_bdaddr;
+       int len, err = 0;
 
-       BT_DBG("sk %p %s", sk, batostr(&sa->sco_bdaddr));
+       BT_DBG("sk %p %s", sk, batostr(&sa.sco_bdaddr));
 
        if (!addr || addr->sa_family != AF_BLUETOOTH)
                return -EINVAL;
 
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
+
        lock_sock(sk);
 
        if (sk->sk_state != BT_OPEN) {
@@ -476,7 +485,8 @@ static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_le
                err = -EADDRINUSE;
        } else {
                /* Save source address */
-               bacpy(&bt_sk(sk)->src, &sa->sco_bdaddr);
+               bacpy(&bt_sk(sk)->src, &sa.sco_bdaddr);
+               sco_pi(sk)->pkt_type = sa.sco_pkt_type;
                sk->sk_state = BT_BOUND;
        }
 
@@ -489,26 +499,34 @@ done:
 
  static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
        struct sock *sk = sock->sk;
-       int err = 0;
-
+       struct sockaddr_sco sa;
+       int len, err = 0;
 
        BT_DBG("sk %p", sk);
 
-       if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_sco))
+       if (!addr || addr->sa_family != AF_BLUETOOTH)
                return -EINVAL;
 
-       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
-               return -EBADFD;
-
-       if (sk->sk_type != SOCK_SEQPACKET)
-               return -EINVAL;
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
 
        lock_sock(sk);
 
+       if (sk->sk_type != SOCK_SEQPACKET) {
+               err = -EINVAL;
+               goto done;
+       }
+
+       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
+               err = -EBADFD;
+               goto done;
+       }
+
        /* Set destination address and psm */
-       bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
+       bacpy(&bt_sk(sk)->dst, &sa.sco_bdaddr);
+       sco_pi(sk)->pkt_type = sa.sco_pkt_type;
 
        if ((err = sco_connect(sk)))
                goto done;
@@ -610,10 +628,13 @@ static int sco_sock_getname(struct socket *sock, struct sockaddr *addr, int *len
        addr->sa_family = AF_BLUETOOTH;
        *len = sizeof(struct sockaddr_sco);
 
-       if (peer)
+       if (peer) {
                bacpy(&sa->sco_bdaddr, &bt_sk(sk)->dst);
-       else
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       } else {
                bacpy(&sa->sco_bdaddr, &bt_sk(sk)->src);
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       }
 
        return 0;
  }
--
Quoted 3 lines

1.6.5.3

BTW i'm happy to switch the logic on the EDR bits, such that 1 is always 'allow this packet type'. I stuck with the Bluetooth SIG convention in this patch because the logic actually came out cleanly.

Either way, its confusing for userspace, and we should document it carefully in the patch to userspace headers.

Nick

author
#2 lore raw
Quoted 354 lines · Nick Pelly
Quoted 345 lines · Nick Pelly

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise selection of SCO/eSCO packet types as per the Packet_Type parameter in HCI Setup Synchrnous Connection Command.

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may not be used.
0x0080 3-EV3 may not be used.
0x0100 2-EV5 may not be used.
0x0200 3-EV5 may not be used.

We've followed the Bluetooth SIG convention of reversing the logic on the EDR bits.

Packet type selection is just a request made to the Bluetooth chipset, and it is up to the link manager on the chipset to negiotiate and decide on the actual packet types used. Furthermore, when a SCO/eSCO connection is eventually made there is no way for the host stack to determine which packet type was used (however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

Typically userspace just wants to select eSCO or SCO packet types, which can be done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS will be selected as default.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain a blacklist of packet types to workaround broken remote devices such as these.

---
 include/net/bluetooth/hci.h      |    7 +++- include/net/bluetooth/hci_core.h |    7 +++- include/net/bluetooth/sco.h      |    4 ++- net/bluetooth/hci_conn.c         |   25 +++++++++------ net/bluetooth/hci_event.c        |    6 ++- net/bluetooth/l2cap.c            |    2 +-
 net/bluetooth/sco.c              |   61 +++++++++++++++++++++++++------------

 7 files changed, 74 insertions(+), 38 deletions(-)
include/net/bluetooth/hci.h +5 -2
index 4f7795f..72efc94 100644
@@ -139,8 +139,11 @@ enum {
  #define ESCO_2EV5      0x0100
  #define ESCO_3EV5      0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
  /* ACL flags */
  #define ACL_START              0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
  void hci_add_sco(struct hci_conn *conn, __u16 handle);
  void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst);
  int hci_conn_del(struct hci_conn *conn);
  void hci_conn_hash_flush(struct hci_dev *hdev);
  void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type);
  int hci_conn_check_link_mode(struct hci_conn *conn);
  int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
  int hci_conn_change_link_key(struct hci_conn *conn);
include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
  struct sockaddr_sco {
        sa_family_t     sco_family;
        bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
  };
 
  /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
  struct sco_pinfo {
        struct bt_sock  bt;
-       __u32           flags;
+       __u16           pkt_type;
+
        struct sco_conn *conn;
  };
 
net/bluetooth/hci_conn.c +2 -1
index fa8b412..8ced057 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
        hci_conn_enter_sniff_mode(conn);
  }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst)
  {
        struct hci_conn *conn;
 
@@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
                conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
                break;

       case SCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_SCO_PKTS;
+       case ESCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_ESCO_PKTS;
               if (lmp_esco_capable(hdev))
-                       conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-                                       (hdev->esco_type & EDR_ESCO_MASK);
+                       conn->pkt_type = pkt_type & hdev->esco_type; else
-                       conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-               break;
-       case ESCO_LINK:
-               conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+                       conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+                                       SCO_PTYPE_MASK;
               break;
       }

net/bluetooth/hci_conn.c +5 -3
@@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
 
  /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type)
  {
        struct hci_conn *acl;
        struct hci_conn *sco;
@@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
        BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
        if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-               if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+               if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
                        return NULL;
        }
 
@@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
                return acl;
 
        if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-               if (!(sco = hci_conn_add(hdev, type, dst))) {
+               if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
                        hci_conn_put(acl);
                        return NULL;
                }
net/bluetooth/hci_event.c +4 -2
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
                }
        } else {
                if (!conn) {
-                       conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
+                       conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
                        if (conn) {
                                conn->out = 1;
                                conn->link_mode |= HCI_LM_MASTER;
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
                conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
                if (!conn) {
-                       if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+                       /* pkt_type not yet used for incoming connections */
+                       if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+                                                       &ev->bdaddr))) {
                                BT_ERR("No memmory for new connection");
                                hci_dev_unlock(hdev);
                                return;
net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
                }
        }
 
-       hcon = hci_connect(hdev, ACL_LINK, dst,
+       hcon = hci_connect(hdev, ACL_LINK, 0, dst,
                                        l2cap_pi(sk)->sec_level, auth_type);
        if (!hcon)
                goto done;
net/bluetooth/sco.c +41 -21
index 77f4153..4976ad5 100644
@@ -176,6 +176,7 @@ static int sco_connect(struct sock *sk)
  {
        bdaddr_t *src = &bt_sk(sk)->src;
        bdaddr_t *dst = &bt_sk(sk)->dst;
+       __u16 pkt_type = sco_pi(sk)->pkt_type;
        struct sco_conn *conn;
        struct hci_conn *hcon;
        struct hci_dev  *hdev;
@@ -192,10 +193,14 @@ static int sco_connect(struct sock *sk)
 
        if (lmp_esco_capable(hdev) && !disable_esco)
                type = ESCO_LINK;
-       else
+       else {
                type = SCO_LINK;
+               pkt_type &= SCO_ESCO_MASK;
+               pkt_type |= EDR_ESCO_MASK;
+       }
 
-       hcon = hci_connect(hdev, type, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
+       hcon = hci_connect(hdev, type, pkt_type, dst,
+                                       BT_SECURITY_LOW, HCI_AT_NO_BONDING);
        if (!hcon)
                goto done;
 
@@ -451,18 +456,22 @@ static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
        return 0;
  }
 
-static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
+       struct sockaddr_sco sa;
        struct sock *sk = sock->sk;
-       bdaddr_t *src = &sa->sco_bdaddr;
-       int err = 0;
+       bdaddr_t *src = &sa.sco_bdaddr;
+       int len, err = 0;
 
-       BT_DBG("sk %p %s", sk, batostr(&sa->sco_bdaddr));
+       BT_DBG("sk %p %s", sk, batostr(&sa.sco_bdaddr));
 
        if (!addr || addr->sa_family != AF_BLUETOOTH)
                return -EINVAL;
 
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
+
        lock_sock(sk);
 
        if (sk->sk_state != BT_OPEN) {
@@ -476,7 +485,8 @@ static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_le
                err = -EADDRINUSE;
        } else {
                /* Save source address */
-               bacpy(&bt_sk(sk)->src, &sa->sco_bdaddr);
+               bacpy(&bt_sk(sk)->src, &sa.sco_bdaddr);
+               sco_pi(sk)->pkt_type = sa.sco_pkt_type;
                sk->sk_state = BT_BOUND;
        }
 
@@ -489,26 +499,34 @@ done:
 
  static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
        struct sock *sk = sock->sk;
-       int err = 0;
-
+       struct sockaddr_sco sa;
+       int len, err = 0;
 
        BT_DBG("sk %p", sk);
 
-       if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_sco))
+       if (!addr || addr->sa_family != AF_BLUETOOTH)
                return -EINVAL;
 
-       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
-               return -EBADFD;
-
-       if (sk->sk_type != SOCK_SEQPACKET)
-               return -EINVAL;
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
 
        lock_sock(sk);
 
+       if (sk->sk_type != SOCK_SEQPACKET) {
+               err = -EINVAL;
+               goto done;
+       }
+
+       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
+               err = -EBADFD;
+               goto done;
+       }
+
        /* Set destination address and psm */
-       bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
+       bacpy(&bt_sk(sk)->dst, &sa.sco_bdaddr);
+       sco_pi(sk)->pkt_type = sa.sco_pkt_type;
 
        if ((err = sco_connect(sk)))
                goto done;
@@ -610,10 +628,13 @@ static int sco_sock_getname(struct socket *sock, struct sockaddr *addr, int *len
        addr->sa_family = AF_BLUETOOTH;
        *len = sizeof(struct sockaddr_sco);
 
-       if (peer)
+       if (peer) {
                bacpy(&sa->sco_bdaddr, &bt_sk(sk)->dst);
-       else
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       } else {
                bacpy(&sa->sco_bdaddr, &bt_sk(sk)->src);
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       }
 
        return 0;
  }
--
Quoted 3 lines

1.6.5.3

BTW i'm happy to switch the logic on the EDR bits, such that 1 is always 'allow this packet type'. I stuck with the Bluetooth SIG convention in this patch because the logic actually came out cleanly.

Quoted 2 lines

Either way, its confusing for userspace, and we should document it carefully in the patch to userspace headers.

Ping.

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +3 -1
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
--- a/include/net/bluetooth/sco.h
+++ b/include/net/bluetooth/sco.h
@@ -37,6 +37,7 @@

struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
};

This will at least unblock my work.

Nick

#3 lore raw
Quoted 376 lines · ext Nick Pelly
Quoted 353 lines · Nick Pelly
Quoted 345 lines · Nick Pelly

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise selection of SCO/eSCO packet types as per the Packet_Type parameter in HCI Setup Synchrnous Connection Command.

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may not be used.
0x0080 3-EV3 may not be used.
0x0100 2-EV5 may not be used.
0x0200 3-EV5 may not be used.

We've followed the Bluetooth SIG convention of reversing the logic on the EDR bits.

Packet type selection is just a request made to the Bluetooth chipset, and it is up to the link manager on the chipset to negiotiate and decide on the actual packet types used. Furthermore, when a SCO/eSCO connection is eventually made there is no way for the host stack to determine which packet type was used (however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

Typically userspace just wants to select eSCO or SCO packet types, which can be done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS will be selected as default.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain a blacklist of packet types to workaround broken remote devices such as these.

---
 include/net/bluetooth/hci.h      |    7 +++-
 include/net/bluetooth/hci_core.h |    7 +++-
 include/net/bluetooth/sco.h      |    4 ++-
 net/bluetooth/hci_conn.c         |   25 +++++++++------
 net/bluetooth/hci_event.c        |    6 ++-
 net/bluetooth/l2cap.c            |    2 +-
 net/bluetooth/sco.c              |   61 +++++++++++++++++++++++++------------
 7 files changed, 74 insertions(+), 38 deletions(-)
include/net/bluetooth/hci.h +5 -2
index 4f7795f..72efc94 100644
@@ -139,8 +139,11 @@ enum {
 #define ESCO_2EV5      0x0100
 #define ESCO_3EV5      0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
 /* ACL flags */
 #define ACL_START              0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
 void hci_add_sco(struct hci_conn *conn, __u16 handle);
 void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst);
 int hci_conn_del(struct hci_conn *conn);
 void hci_conn_hash_flush(struct hci_dev *hdev);
 void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);
include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
 /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
 struct sco_pinfo {
       struct bt_sock  bt;
-       __u32           flags;
+       __u16           pkt_type;
+
       struct sco_conn *conn;
 };
 
net/bluetooth/hci_conn.c +15 -10
index fa8b412..8ced057 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
       hci_conn_enter_sniff_mode(conn);
 }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst)
 {
       struct hci_conn *conn;
 
@@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
               conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
               break;
       case SCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_SCO_PKTS;
+       case ESCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_ESCO_PKTS;
               if (lmp_esco_capable(hdev))
-                       conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-                                       (hdev->esco_type & EDR_ESCO_MASK);
+                       conn->pkt_type = pkt_type & hdev->esco_type;
               else
-                       conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-               break;
-       case ESCO_LINK:
-               conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+                       conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+                                       SCO_PTYPE_MASK;
               break;
       }
 
@@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
 
 /* Create SCO or ACL connection.
 * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type)
 {
       struct hci_conn *acl;
       struct hci_conn *sco;
@@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
       BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
       if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-               if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+               if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
                       return NULL;
       }
 
@@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
               return acl;
 
       if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-               if (!(sco = hci_conn_add(hdev, type, dst))) {
+               if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
                       hci_conn_put(acl);
                       return NULL;
               }
net/bluetooth/hci_event.c +4 -2
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
               }
       } else {
               if (!conn) {
-                       conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
+                       conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
                       if (conn) {
                               conn->out = 1;
                               conn->link_mode |= HCI_LM_MASTER;
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
               conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
               if (!conn) {
-                       if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+                       /* pkt_type not yet used for incoming connections */
+                       if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+                                                       &ev->bdaddr))) {
                               BT_ERR("No memmory for new connection");
                               hci_dev_unlock(hdev);
                               return;
net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
               }
       }
 
-       hcon = hci_connect(hdev, ACL_LINK, dst,
+       hcon = hci_connect(hdev, ACL_LINK, 0, dst,
                                       l2cap_pi(sk)->sec_level, auth_type);
       if (!hcon)
               goto done;
net/bluetooth/sco.c +41 -21
index 77f4153..4976ad5 100644
@@ -176,6 +176,7 @@ static int sco_connect(struct sock *sk)
 {
       bdaddr_t *src = &bt_sk(sk)->src;
       bdaddr_t *dst = &bt_sk(sk)->dst;
+       __u16 pkt_type = sco_pi(sk)->pkt_type;
       struct sco_conn *conn;
       struct hci_conn *hcon;
       struct hci_dev  *hdev;
@@ -192,10 +193,14 @@ static int sco_connect(struct sock *sk)
 
       if (lmp_esco_capable(hdev) && !disable_esco)
               type = ESCO_LINK;
-       else
+       else {
               type = SCO_LINK;
+               pkt_type &= SCO_ESCO_MASK;
+               pkt_type |= EDR_ESCO_MASK;
+       }
 
-       hcon = hci_connect(hdev, type, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
+       hcon = hci_connect(hdev, type, pkt_type, dst,
+                                       BT_SECURITY_LOW, HCI_AT_NO_BONDING);
       if (!hcon)
               goto done;
 
@@ -451,18 +456,22 @@ static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
       return 0;
 }
 
-static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
+       struct sockaddr_sco sa;
       struct sock *sk = sock->sk;
-       bdaddr_t *src = &sa->sco_bdaddr;
-       int err = 0;
+       bdaddr_t *src = &sa.sco_bdaddr;
+       int len, err = 0;
 
-       BT_DBG("sk %p %s", sk, batostr(&sa->sco_bdaddr));
+       BT_DBG("sk %p %s", sk, batostr(&sa.sco_bdaddr));
 
       if (!addr || addr->sa_family != AF_BLUETOOTH)
               return -EINVAL;
 
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
+
       lock_sock(sk);
 
       if (sk->sk_state != BT_OPEN) {
@@ -476,7 +485,8 @@ static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_le
               err = -EADDRINUSE;
       } else {
               /* Save source address */
-               bacpy(&bt_sk(sk)->src, &sa->sco_bdaddr);
+               bacpy(&bt_sk(sk)->src, &sa.sco_bdaddr);
+               sco_pi(sk)->pkt_type = sa.sco_pkt_type;
               sk->sk_state = BT_BOUND;
       }
 
@@ -489,26 +499,34 @@ done:
 
 static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags)
 {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
       struct sock *sk = sock->sk;
-       int err = 0;
-
+       struct sockaddr_sco sa;
+       int len, err = 0;
 
       BT_DBG("sk %p", sk);
 
-       if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_sco))
+       if (!addr || addr->sa_family != AF_BLUETOOTH)
               return -EINVAL;
 
-       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
-               return -EBADFD;
-
-       if (sk->sk_type != SOCK_SEQPACKET)
-               return -EINVAL;
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
 
       lock_sock(sk);
 
+       if (sk->sk_type != SOCK_SEQPACKET) {
+               err = -EINVAL;
+               goto done;
+       }
+
+       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
+               err = -EBADFD;
+               goto done;
+       }
+
       /* Set destination address and psm */
-       bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
+       bacpy(&bt_sk(sk)->dst, &sa.sco_bdaddr);
+       sco_pi(sk)->pkt_type = sa.sco_pkt_type;
 
       if ((err = sco_connect(sk)))
               goto done;
@@ -610,10 +628,13 @@ static int sco_sock_getname(struct socket *sock, struct sockaddr *addr, int *len
       addr->sa_family = AF_BLUETOOTH;
       *len = sizeof(struct sockaddr_sco);
 
-       if (peer)
+       if (peer) {
               bacpy(&sa->sco_bdaddr, &bt_sk(sk)->dst);
-       else
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       } else {
               bacpy(&sa->sco_bdaddr, &bt_sk(sk)->src);
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       }
 
       return 0;
 }
--
Quoted 3 lines

1.6.5.3

BTW i'm happy to switch the logic on the EDR bits, such that 1 is always 'allow this packet type'. I stuck with the Bluetooth SIG convention in this patch because the logic actually came out cleanly.

Quoted 2 lines

Either way, its confusing for userspace, and we should document it carefully in the patch to userspace headers.

Ping.

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +2 -0
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
include/net/bluetooth/sco.h +1 -0
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
Quoted 1 line

This will at least unblock my work.

Would it be better to add new sockopt for sco socket?

Signature · 1 line
Ville
author
#4 lore raw
Quoted 427 lines · Ville Tervo
Quoted 426 lines · ext Nick Pelly
Quoted 402 lines · Nick Pelly
Quoted 390 lines · Nick Pelly

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise
selection of SCO/eSCO packet types as per the Packet_Type parameter in HCI Setup Synchrnous Connection Command.

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may not be used.
0x0080 3-EV3 may not be used.
0x0100 2-EV5 may not be used.
0x0200 3-EV5 may not be used.

We've followed the Bluetooth SIG convention of reversing the logic on the
EDR bits.

Packet type selection is just a request made to the Bluetooth chipset, and
it is up to the link manager on the chipset to negiotiate and decide on the
actual packet types used. Furthermore, when a SCO/eSCO connection is eventually
made there is no way for the host stack to determine which packet type was used
(however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection
Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

Typically userspace just wants to select eSCO or SCO packet types, which can be
done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is
zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS
will be selected as default.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections
after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain
a blacklist of packet types to workaround broken remote devices such as these.

---
 include/net/bluetooth/hci.h      |    7 +++- include/net/bluetooth/hci_core.h |    7 +++- include/net/bluetooth/sco.h      |    4 ++- net/bluetooth/hci_conn.c         |   25 +++++++++------ net/bluetooth/hci_event.c        |    6 ++- net/bluetooth/l2cap.c            |    2 +- net/bluetooth/sco.c              |   61
+++++++++++++++++++++++++------------

 7 files changed, 74 insertions(+), 38 deletions(-)
include/net/bluetooth/hci.h +5 -2
index 4f7795f..72efc94 100644
@@ -139,8 +139,11 @@ enum {
  #define ESCO_2EV5      0x0100
  #define ESCO_3EV5      0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
  /* ACL flags */
  #define ACL_START              0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8
 reason);
  void hci_add_sco(struct hci_conn *conn, __u16 handle);
  void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t
 *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst);
  int hci_conn_del(struct hci_conn *conn);
  void hci_conn_hash_flush(struct hci_dev *hdev);
  void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t
 *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type);

 int hci_conn_check_link_mode(struct hci_conn *conn); int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);

include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
  struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
  };
 
  /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
  struct sco_pinfo {
       struct bt_sock  bt;
-       __u32           flags;
+       __u16           pkt_type;
+
       struct sco_conn *conn;
  };
 
net/bluetooth/hci_conn.c +2 -1
index fa8b412..8ced057 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
       hci_conn_enter_sniff_mode(conn);
  }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t
 *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst)
  {
       struct hci_conn *conn;
@@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev
 *hdev, int type, bdaddr_t *dst)
               conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
               break;

      case SCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_SCO_PKTS;
+       case ESCO_LINK:
+               if (!pkt_type)
+                       pkt_type = ALL_ESCO_PKTS;
              if (lmp_esco_capable(hdev))
-                       conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-                                       (hdev->esco_type & EDR_ESCO_MASK);
+                       conn->pkt_type = pkt_type & hdev->esco_type; else
-                       conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-               break;
-       case ESCO_LINK:
-               conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+                       conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+                                       SCO_PTYPE_MASK; break;
      }

net/bluetooth/hci_conn.c +3 -1
@@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
 
  /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t
 *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+                                       __u16 pkt_type, bdaddr_t *dst,
+                                       __u8 sec_level, __u8 auth_type)
  {
       struct hci_conn *acl;

      struct hci_conn *sco;

net/bluetooth/hci_conn.c +0 -0
@@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev,

int type, bdaddr_t *dst, __u8
      BT_DBG("%s dst %s", hdev->name, batostr(dst));

      if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-               if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+               if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst))) return NULL;
      }

net/bluetooth/hci_conn.c +0 -0
@@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev,

int type, bdaddr_t *dst, __u8
              return acl;

      if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-               if (!(sco = hci_conn_add(hdev, type, dst))) {
+               if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) { hci_conn_put(acl);
                      return NULL;
              }

net/bluetooth/hci_event.c +1 -1
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev
 *hdev, __u8 status)
               }
       } else {
               if (!conn) {
-                       conn = hci_conn_add(hdev, ACL_LINK,
 &cp->bdaddr);
+                       conn = hci_conn_add(hdev, ACL_LINK, 0,
 &cp->bdaddr);

                      if (conn) {
                              conn->out = 1; conn->link_mode |= HCI_LM_MASTER;

net/bluetooth/hci_event.c +0 -0
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct

hci_dev *hdev, struct sk_buff *sk

              conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
              if (!conn) {
-                       if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+                       /* pkt_type not yet used for incoming connections */
+                       if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+                                                       &ev->bdaddr))) { BT_ERR("No memmory for new connection"); hci_dev_unlock(hdev);
                              return;

net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
               }
       }
 
-       hcon = hci_connect(hdev, ACL_LINK, dst,
+       hcon = hci_connect(hdev, ACL_LINK, 0, dst,
                                       l2cap_pi(sk)->sec_level,
 auth_type);
       if (!hcon)

              goto done;

net/bluetooth/sco.c +7 -2
index 77f4153..4976ad5 100644
@@ -176,6 +176,7 @@ static int sco_connect(struct sock *sk)
  {
       bdaddr_t *src = &bt_sk(sk)->src;
       bdaddr_t *dst = &bt_sk(sk)->dst;
+       __u16 pkt_type = sco_pi(sk)->pkt_type;
       struct sco_conn *conn;
       struct hci_conn *hcon;
       struct hci_dev  *hdev;
@@ -192,10 +193,14 @@ static int sco_connect(struct sock *sk)
 
       if (lmp_esco_capable(hdev) && !disable_esco)
               type = ESCO_LINK;
-       else
+       else {
               type = SCO_LINK;
+               pkt_type &= SCO_ESCO_MASK;
+               pkt_type |= EDR_ESCO_MASK;
+       }
 
-       hcon = hci_connect(hdev, type, dst, BT_SECURITY_LOW,
 HCI_AT_NO_BONDING);
+       hcon = hci_connect(hdev, type, pkt_type, dst,
+                                       BT_SECURITY_LOW,
 HCI_AT_NO_BONDING);
       if (!hcon)

              goto done;

net/bluetooth/sco.c +9 -5
@@ -451,18 +456,22 @@ static int sco_sock_create(struct net *net, struct
 socket *sock, int protocol)
       return 0;
  }
 
-static int sco_sock_bind(struct socket *sock, struct sockaddr *addr,
 int addr_len)
+static int sco_sock_bind(struct socket *sock, struct sockaddr *addr,
 int alen)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
+       struct sockaddr_sco sa;
       struct sock *sk = sock->sk;
-       bdaddr_t *src = &sa->sco_bdaddr;
-       int err = 0;
+       bdaddr_t *src = &sa.sco_bdaddr;
+       int len, err = 0;
 
-       BT_DBG("sk %p %s", sk, batostr(&sa->sco_bdaddr));
+       BT_DBG("sk %p %s", sk, batostr(&sa.sco_bdaddr));
 
       if (!addr || addr->sa_family != AF_BLUETOOTH)
               return -EINVAL;
 
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
+

      lock_sock(sk);

      if (sk->sk_state != BT_OPEN) {

net/bluetooth/sco.c +0 -0
@@ -476,7 +485,8 @@ static int sco_sock_bind(struct socket *sock, struct

sockaddr *addr, int addr_le
              err = -EADDRINUSE;
      } else {
              /* Save source address */
-               bacpy(&bt_sk(sk)->src, &sa->sco_bdaddr);
+               bacpy(&bt_sk(sk)->src, &sa.sco_bdaddr);
+               sco_pi(sk)->pkt_type = sa.sco_pkt_type; sk->sk_state = BT_BOUND;
      }

net/bluetooth/sco.c +18 -10
@@ -489,26 +499,34 @@ done:
 
  static int sco_sock_connect(struct socket *sock, struct sockaddr *addr,
 int alen, int flags)
  {
-       struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
       struct sock *sk = sock->sk;
-       int err = 0;
-
+       struct sockaddr_sco sa;
+       int len, err = 0;
 
       BT_DBG("sk %p", sk);
 
-       if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct
 sockaddr_sco))
+       if (!addr || addr->sa_family != AF_BLUETOOTH)
               return -EINVAL;
 
-       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
-               return -EBADFD;
-
-       if (sk->sk_type != SOCK_SEQPACKET)
-               return -EINVAL;
+       memset(&sa, 0, sizeof(sa));
+       len = min_t(unsigned int, sizeof(sa), alen);
+       memcpy(&sa, addr, len);
 
       lock_sock(sk);
 
+       if (sk->sk_type != SOCK_SEQPACKET) {
+               err = -EINVAL;
+               goto done;
+       }
+
+       if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
+               err = -EBADFD;
+               goto done;
+       }
+
       /* Set destination address and psm */
-       bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
+       bacpy(&bt_sk(sk)->dst, &sa.sco_bdaddr);
+       sco_pi(sk)->pkt_type = sa.sco_pkt_type;
 

      if ((err = sco_connect(sk)))
              goto done;

net/bluetooth/sco.c +0 -0
@@ -610,10 +628,13 @@ static int sco_sock_getname(struct socket *sock,

struct sockaddr *addr, int *len
      addr->sa_family = AF_BLUETOOTH;
      *len = sizeof(struct sockaddr_sco);

-       if (peer)
+       if (peer) {
              bacpy(&sa->sco_bdaddr, &bt_sk(sk)->dst);
-       else
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       } else {
              bacpy(&sa->sco_bdaddr, &bt_sk(sk)->src);
+               sa->sco_pkt_type = sco_pi(sk)->pkt_type;
+       }

Quoted 6 lines

      return 0;
 }
--
1.6.5.3

BTW i'm happy to switch the logic on the EDR bits, such that 1 is always 'allow this packet type'. I stuck with the Bluetooth SIG convention in this patch because the logic actually came out cleanly.

Quoted 2 lines

Either way, its confusing for userspace, and we should document it carefully in the patch to userspace headers.

Ping.

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +2 -0
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
include/net/bluetooth/sco.h +1 -0
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
Quoted 3 lines
Quoted 1 line

This will at least unblock my work.

Would it be better to add new sockopt for sco socket?

What advantage does that have?

Putting it in struct sockaddr_sco seems to make more sense since packet types can only be selected during SCO connection establishment. They can't be changed once the socket is connected.

Nick

maintainer
#5 lore raw

Hi Nick,

Quoted 21 lines
Quoted 17 lines
Quoted 17 lines

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +2 -0
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
include/net/bluetooth/sco.h +1 -0
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
      sa_family_t     sco_family;
      bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
Quoted 3 lines
Quoted 1 line

This will at least unblock my work.

Would it be better to add new sockopt for sco socket?

Quoted 5 lines

What advantage does that have?

Putting it in struct sockaddr_sco seems to make more sense since packet types can only be selected during SCO connection establishment. They can't be changed once the socket is connected.

in theory you can change the allowed packet types for ACL, SCO and eSCO after the connection is active. However the usefulness here is fairly limited. In case of ACL it is purely academical and most link manager will just ignore you. Mainly because the host stack can't really make a good decision here anyway.

Personally I think it is a total brain dead concept to give this into the control of the host stack anyway. For eSCO packet types this make a bit more sense since you might wanna control the bandwidth. However changing them later is just pointless. And I don't recall of any profile actually mentioning about it. I think they had a great idea behind eSCO support, but since it is impossible to get the negotiation parts right, everybody sticks with simple eSCO channels and doesn't bother to change them.

And even if we would be going for a setsockopt(), that would be blocking and then again pretty much pointless API. The sockaddr is most logical thing that fits into what we wanna achieve. Disallow/allow certain packet types and essentially force SCO over eSCO.

Regards

Marcel

#6 lore raw

Hi Marcel and Nick,

Quoted 27 lines · ext Marcel Holtmann

Hi Nick,

Quoted 25 lines
Quoted 17 lines
Quoted 17 lines

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +2 -0
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
include/net/bluetooth/sco.h +1 -0
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
      sa_family_t     sco_family;
      bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
Quoted 2 lines
Quoted 1 line

This will at least unblock my work.

Would it be better to add new sockopt for sco socket?

What advantage does that have?

Putting it in struct sockaddr_sco seems to make more sense since packet types can only be selected during SCO connection establishment. They can't be changed once the socket is connected.

The idea was to not force user space developers to handle packet type decision. And still give opportunity to tune allowed packet types.

Quoted 16 lines

in theory you can change the allowed packet types for ACL, SCO and eSCO after the connection is active. However the usefulness here is fairly limited. In case of ACL it is purely academical and most link manager will just ignore you. Mainly because the host stack can't really make a good decision here anyway.

Personally I think it is a total brain dead concept to give this into the control of the host stack anyway. For eSCO packet types this make a bit more sense since you might wanna control the bandwidth. However changing them later is just pointless. And I don't recall of any profile actually mentioning about it. I think they had a great idea behind eSCO support, but since it is impossible to get the negotiation parts right, everybody sticks with simple eSCO channels and doesn't bother to change them.

Quoted 4 lines

And even if we would be going for a setsockopt(), that would be blocking and then again pretty much pointless API. The sockaddr is most logical thing that fits into what we wanna achieve. Disallow/allow certain packet types and essentially force SCO over eSCO.

My idea was to provide same functionality than through sockaddr. IOW just provide API to control packet types for connection creation/accept and not to change types during the connection.

Sockaddr sounds good. It fulfills current requirements.

Signature · 1 line
Ville
author
#7 lore raw
In reply to Marcel Holtmann
Quoted 44 lines · Marcel Holtmann

Hi Nick,

Quoted 21 lines
Quoted 17 lines
Quoted 17 lines

As a first step, can we get consensus on the userspace API:

include/net/bluetooth/hci.h +2 -0
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS   (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS  (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
 
include/net/bluetooth/sco.h +1 -0
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
       sa_family_t     sco_family;
       bdaddr_t        sco_bdaddr;
+       __u16           sco_pkt_type;
 };
 
Quoted 3 lines
Quoted 1 line

This will at least unblock my work.

Would it be better to add new sockopt for sco socket?

Quoted 5 lines

What advantage does that have?

Putting it in struct sockaddr_sco seems to make more sense since packet types can only be selected during SCO connection establishment. They can't be changed once the socket is connected.

in theory you can change the allowed packet types for ACL, SCO and eSCO after the connection is active. However the usefulness here is fairly limited. In case of ACL it is purely academical and most link manager will just ignore you. Mainly because the host stack can't really make a good decision here anyway.

Personally I think it is a total brain dead concept to give this into the control of the host stack anyway. For eSCO packet types this make a bit more sense since you might wanna control the bandwidth. However changing them later is just pointless. And I don't recall of any profile actually mentioning about it. I think they had a great idea behind eSCO support, but since it is impossible to get the negotiation parts right, everybody sticks with simple eSCO channels and doesn't bother to change them.

Quoted 4 lines

And even if we would be going for a setsockopt(), that would be blocking and then again pretty much pointless API. The sockaddr is most logical thing that fits into what we wanna achieve. Disallow/allow certain packet types and essentially force SCO over eSCO.

Ok seems like there is agreement on using struct sockaddr_sco for sco_pkt_type.

A more controversial question is whether to follow the SIG convention of reversing the logic on the EDR bits in the packet type mask (1 means do *not* use this packet for the EDR bits), or to use consistent logic for each bit (1 always means *allow* this packet type) for packet selection in scokaddr_sco.sco_pkt_type.

The original patch I posted followed the SIG convention. However after more thinking I am leaning towards using consistent logic for each bit. 1 will always mean 'allow this packet'. My rationale is that the most common use for sco_pkt_type will be to request only SCO packet types allowed. If however the SIG adds more reverse logic packet types, and we follow the SIG convention, then old userspace code that just requested the SCO packet types will now end up with the new packet types as well. So I think it is best to avoid this situation and for 1 to always mean 'allow this packet' in sockaddr_sco.sco_pkt_type.

Attached is a new patch with the consistent bit logic.

Comments?

Cheers,
Nick

From 6efa97b316cf3f8897a64a739ea221879dc134dd Mon Sep 17 00:00:00 2001
From: Nick Pelly <[email protected]>
Date: Thu, 11 Feb 2010 11:54:28 -0800
Subject: [PATCH] Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise selection of SCO/eSCO packet types. Currently those bits are:

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may be used.
0x0080 3-EV3 may be used.
0x0100 2-EV5 may be used.
0x0200 3-EV5 may be used.

This is similar to the Packet Type parameter in the HCI Setup Synchronous Connection Command, except that we are not reversing the logic on the EDR bits. This makes the use of sco_pkt_tpye forward portable for the use case of white-listing packet types, which we expect will be the primary use case.

If sco_pkt_type is zero, or userspace uses the old struct sockaddr_sco, then the default behavior is to allow all packet types.

Packet type selection is just a request made to the Bluetooth chipset, and it is up to the link manager on the chipset to negiotiate and decide on the actual packet types used. Furthermore, when a SCO/eSCO connection is eventually made there is no way for the host stack to determine which packet type was used (however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible to add this in the future as a parameter to the Accept Synchronous Connection Command, however its a little trickier because the kernel does not currently preserve sockaddr_sco data between userspace calls to accept().

The most common use for sco_pkt_type will be to white-list only SCO packets, which can be done with the hci.h constant SCO_ESCO_MASK.

This patch is motivated by broken Bluetooth carkits such as the Motorolo HF850 (it claims to support eSCO, but will actually reject eSCO connections after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain a list of compatible packet types to workaround remote devices such as these.

Based on a patch by Marcel Holtmann.

---
 include/net/bluetooth/hci.h      |    6 ++-
 include/net/bluetooth/hci_core.h |    7 +++-
 include/net/bluetooth/sco.h      |    4 ++-
 net/bluetooth/hci_conn.c         |   33 ++++++++++++++-------
 net/bluetooth/hci_event.c        |    6 ++-
 net/bluetooth/l2cap.c            |    2 +-
 net/bluetooth/sco.c              |   60 +++++++++++++++++++++++++------------
 7 files changed, 79 insertions(+), 39 deletions(-)
include/net/bluetooth/hci.h +4 -2
index 4f7795f..b32dcff 100644
@@ -139,8 +139,10 @@ enum {
 #define ESCO_2EV5	0x0100
 #define ESCO_3EV5	0x0200
 
-#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
-#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define SCO_ESCO_MASK	(ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK	(ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define ALL_ESCO_MASK	(SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5 | \
+			EDR_ESCO_MASK)
 
 /* ACL flags */
 #define ACL_START		0x00
include/net/bluetooth/hci_core.h +5 -2
index b6d36cb..cbcc5b1 100644
@@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
 void hci_add_sco(struct hci_conn *conn, __u16 handle);
 void hci_setup_sync(struct hci_conn *conn, __u16 handle);
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst);
 int hci_conn_del(struct hci_conn *conn);
 void hci_conn_hash_flush(struct hci_dev *hdev);
 void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst,
+					__u8 sec_level, __u8 auth_type);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);
include/net/bluetooth/sco.h +3 -1
index e28a2a7..924338a 100644
@@ -37,6 +37,7 @@
 struct sockaddr_sco {
 	sa_family_t	sco_family;
 	bdaddr_t	sco_bdaddr;
+	__u16		sco_pkt_type;
 };
 
 /* SCO socket options */
@@ -72,7 +73,8 @@ struct sco_conn {
 
 struct sco_pinfo {
 	struct bt_sock	bt;
-	__u32		flags;
+	__u16		pkt_type;
+
 	struct sco_conn	*conn;
 };
 
net/bluetooth/hci_conn.c +22 -11
index fa8b412..2f4d30f 100644
@@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
 	hci_conn_enter_sniff_mode(conn);
 }
 
-struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst)
 {
 	struct hci_conn *conn;
 
@@ -221,14 +222,22 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
 		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 		break;
 	case SCO_LINK:
-		if (lmp_esco_capable(hdev))
-			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-					(hdev->esco_type & EDR_ESCO_MASK);
-		else
-			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
-		break;
+		if (!pkt_type)
+			pkt_type = SCO_ESCO_MASK;
 	case ESCO_LINK:
-		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
+		if (!pkt_type)
+			pkt_type = ALL_ESCO_MASK;
+		if (lmp_esco_capable(hdev)) {
+			/* HCI Setup Synchronous Connection Command uses
+			   reverse logic on the EDR_ESCO_MASK bits */
+			conn->pkt_type = (pkt_type ^ EDR_ESCO_MASK) &
+					hdev->esco_type;
+		} else {
+			/* Legacy HCI Add Sco Connection Command uses a
+			   shifted bitmask */
+			conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
+					SCO_PTYPE_MASK;
+		}
 		break;
 	}
 
@@ -340,7 +349,9 @@ EXPORT_SYMBOL(hci_get_route);
 
 /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst,
+					__u8 sec_level, __u8 auth_type)
 {
 	struct hci_conn *acl;
 	struct hci_conn *sco;
@@ -348,7 +359,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 	BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
 	if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-		if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+		if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
 			return NULL;
 	}
 
@@ -364,7 +375,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 		return acl;
 
 	if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-		if (!(sco = hci_conn_add(hdev, type, dst))) {
+		if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
 			hci_conn_put(acl);
 			return NULL;
 		}
net/bluetooth/hci_event.c +4 -2
index 10edd1a..5343e0f 100644
@@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
 		}
 	} else {
 		if (!conn) {
-			conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
+			conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
 			if (conn) {
 				conn->out = 1;
 				conn->link_mode |= HCI_LM_MASTER;
@@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
 		conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
 		if (!conn) {
-			if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+			/* pkt_type not yet used for incoming connections */
+			if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
+							&ev->bdaddr))) {
 				BT_ERR("No memmory for new connection");
 				hci_dev_unlock(hdev);
 				return;
net/bluetooth/l2cap.c +1 -1
index d056886..b342f06 100644
@@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
 		}
 	}
 
-	hcon = hci_connect(hdev, ACL_LINK, dst,
+	hcon = hci_connect(hdev, ACL_LINK, 0, dst,
 					l2cap_pi(sk)->sec_level, auth_type);
 	if (!hcon)
 		goto done;
net/bluetooth/sco.c +40 -20

117 lines not on this page · raw message

Signature · 1 line
1.6.5.3
#8 lore raw

Hi Nick

Quoted 24 lines
Quoted 4 lines

And even if we would be going for a setsockopt(), that would be blocking and then again pretty much pointless API. The sockaddr is most logical thing that fits into what we wanna achieve. Disallow/allow certain packet types and essentially force SCO over eSCO.

Ok seems like there is agreement on using struct sockaddr_sco for sco_pkt_type.

A more controversial question is whether to follow the SIG convention of reversing the logic on the EDR bits in the packet type mask (1 means do *not* use this packet for the EDR bits), or to use consistent logic for each bit (1 always means *allow* this packet type) for packet selection in scokaddr_sco.sco_pkt_type.

The original patch I posted followed the SIG convention. However after more thinking I am leaning towards using consistent logic for each bit. 1 will always mean 'allow this packet'. My rationale is that the most common use for sco_pkt_type will be to request only SCO packet types allowed. If however the SIG adds more reverse logic packet types, and we follow the SIG convention, then old userspace code that just requested the SCO packet types will now end up with the new packet types as well. So I think it is best to avoid this situation and for 1 to always mean 'allow this packet' in sockaddr_sco.sco_pkt_type.

Quoted 3 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

Signature · 1 line
Ville
author
#9 lore raw
Quoted 27 lines · Ville Tervo

Hi Nick

Quoted 25 lines
Quoted 4 lines

And even if we would be going for a setsockopt(), that would be blocking and then again pretty much pointless API. The sockaddr is most logical thing that fits into what we wanna achieve. Disallow/allow certain packet types and essentially force SCO over eSCO.

Ok seems like there is agreement on using struct sockaddr_sco for sco_pkt_type.

A more controversial question is whether to follow the SIG convention of reversing the logic on the EDR bits in the packet type mask (1 means do *not* use this packet for the EDR bits), or to use consistent logic for each bit (1 always means *allow* this packet type) for packet selection in scokaddr_sco.sco_pkt_type.

The original patch I posted followed the SIG convention. However after more thinking I am leaning towards using consistent logic for each bit. 1 will always mean 'allow this packet'. My rationale is that the most common use for sco_pkt_type will be to request only SCO packet types allowed. If however the SIG adds more reverse logic packet types, and we follow the SIG convention, then old userspace code that just requested the SCO packet types will now end up with the new packet types as well. So I think it is best to avoid this situation and for 1 to always mean 'allow this packet' in sockaddr_sco.sco_pkt_type.

Quoted 7 lines
Quoted 3 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

The current patch achieves this backwards compatibility by assuming that all packet types are allowed if the old sockaddr_sco struct is used (it checks the size), or if sco_pkt_type is 0.

Nick

#10 lore raw
Quoted 10 lines · Nick Pelly
Quoted 6 lines
Quoted 3 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

The current patch achieves this backwards compatibility by assuming that all packet types are allowed if the old sockaddr_sco struct is used (it checks the size), or if sco_pkt_type is 0.

OK. Then my concerns are gone.

Signature · 1 line
Ville
author
#11 lore raw
Quoted 10 lines · Ville Tervo
Quoted 9 lines · Nick Pelly
Quoted 8 lines
Quoted 4 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

Quoted 5 lines
Quoted 3 lines

The current patch achieves this backwards compatibility by assuming that all packet types are allowed if the old sockaddr_sco struct is used (it checks the size), or if sco_pkt_type is 0.

OK. Then my concerns are gone.

As best I can tell there are no objections. We're going ahead with this patch.

http://android.git.kernel.org/?p=kernel/common.git;a=commit;h=3b077241e02041b1f03fee912896b8de1d7ac096

Nick

#12 lore raw
Quoted 15 lines · Nick Pelly
Quoted 14 lines · Ville Tervo
Quoted 12 lines · Nick Pelly
Quoted 8 lines
Quoted 4 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

The current patch achieves this backwards compatibility by assuming that all packet types are allowed if the old sockaddr_sco struct is used (it checks the size), or if sco_pkt_type is 0.

Quoted 5 lines
Quoted 1 line

OK. Then my concerns are gone.

As best I can tell there are no objections. We're going ahead with this patch.

http://android.git.kernel.org/?p=kernel/common.git;a=commit;h=3b077241e02041b1f03fee912896b8de1d7ac096

FWIW (I am not a Linux, Android or BlueZ developer) I think abusing the socket address structure for this is wrong and a socket option should be used to set options for the socket.

In general, the "Address Family" AF_BLUETOOTH domain sockets should all use the same socket address structure. That BlueZ/Linux does not and never has done so should be considered a bug.

regards,
iain

#13 lore raw
In reply to Nick Pelly

Hi Marcel,

Quoted 15 lines · Nick Pelly
Quoted 14 lines · Ville Tervo
Quoted 12 lines · Nick Pelly
Quoted 8 lines
Quoted 4 lines

Attached is a new patch with the consistent bit logic.

Comments?

In order to keep backwards compatibility 1 should mean "don't allow this packet type" for all packets. Other wise old application with new kernel would not allow any packet types.

The current patch achieves this backwards compatibility by assuming that all packet types are allowed if the old sockaddr_sco struct is used (it checks the size), or if sco_pkt_type is 0.

Quoted 7 lines
Quoted 1 line

OK. Then my concerns are gone.

As best I can tell there are no objections. We're going ahead with this patch.

http://android.git.kernel.org/?p=kernel/common.git;a=commit;h=3b077241e02041b1f03fee912896b8de1d7ac096

Nick

Is this patch (or something similar) being considered for merging into the bluetooth-2.6 tree. We are experiencing similar issues with these and other car kits.

Thanks,
Steve