Skip to contentSkip to conversation

add xilinx ml507 machine

PATCH In review Adrian Alonso 2 participants 5 messages Feb 15, 2010 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 add xilinx ml507 machine

From: aalonso <[email protected]>

---
 conf/machine/include/tune-ppc440.inc |    2 +-
 conf/machine/xilinx-ml507.conf       |   33 +++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletions(-)
 create mode 100644 conf/machine/xilinx-ml507.conf
conf/machine/include/tune-ppc440.inc +1 -1
index feca186..6a56bfa 100644
@@ -1,4 +1,4 @@
 TARGET_CC_ARCH = "-mcpu=440"
 BASE_PACKAGE_ARCH = "ppc440"
 FEED_ARCH = "ppc440"
-PACKAGE_EXTRA_ARCHS += "ppc440e"
+PACKAGE_EXTRA_ARCHS += "ppc440"
conf/machine/xilinx-ml507.conf new file +33 -0
new file mode 100644
index 0000000..c376cfe
@@ -0,0 +1,33 @@
+# Copyright (C) 2010, Adrian Alonso <[email protected]>
+# Released under the MIT license (see packages/COPYING)
+#@TYPE: Machine
+#@Name: Xilinx ML507 FPGA Development Platform
+#@DESCRIPTION: Machine configuration for Xilinx ML507
+
+TARGET_ARCH = "powerpc"
+TARGET_CPU = "440"
+TARGET_FPU = "soft"
+#tune for the 440 cpu
+require conf/machine/include/tune-ppc440.inc
+
+#ASSUME_PROVIDED += "virtual/kernel"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+
+KERNEL_IMAGETYPE = "uImage"
+
+MACHINE_FEATURES = "kernel26 ext2 usbhost udev"
+MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
+
+UBOOT_ARCH = "ppc"
+UBOOT_MACHINE = "ml507_defconfig"
+
+# Xilinx EDK override paramater definitions for xilinx-bsp
+# Include in your local.conf
+# XILINX_BSP_PATH = "complete path for Xilinx EDK project"
+# XILINX_BOARD = "ml507"
+
+# Don't use tty1
+USE_VT = "0"
+SERIAL_CONSOLE = "115200 ttyS0"
+
+
Signature · 1 line
1.6.6
#1 lore raw

PATCH 1/1 device tree for xilinx ml507

From: aalonso <[email protected]>

---
 recipes/linux/linux.inc |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
recipes/linux/linux.inc +1 -0
index 7405c08..b562657 100644
@@ -38,6 +38,7 @@ KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
 KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
 KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
 KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
 
 KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
 
Signature · 1 line
1.6.6
#2 lore raw

PATCH 1/1 ml507 xilinx bsp update

From: aalonso <[email protected]>

---
 classes/xilinx-bsp.bbclass |   56 +++++++++++++++++++++----------------------
 1 files changed, 27 insertions(+), 29 deletions(-)
classes/xilinx-bsp.bbclass +27 -29
index f657e5b..c719b3b 100644
@@ -3,7 +3,7 @@
 #
 #This class handles all the intricasies of getting the required files from the 
 #ISE/EDK/project to the kernel and prepare the kernel for compilation.
-#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405) and Microblaze
+#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405,440) and Microblaze
 #Only the PowerPC BSP has been tested so far
 #For this to work correctly you need to add XILINX_BSP_PATH and XILINX_BOARD to your 
 #local.conf
@@ -12,42 +12,40 @@
 #
 #Currently supported boards
 #Xilinx ML403
+#Xilinx ML507
 #More to come soon ;)
 
 do_configure_prepend() {
 
-
 #first check that the XILINX_BSP_PATH and XILINX_BOARD have been defined in local.conf
-if [ -z "${XILINX_BSP_PATH}" ]; then
-   oefatal "XILINX_BSP_PATH not defined ! Exiting..."
-   exit 1
-
-else
-   if [ -z "${XILINX_BOARD}" ]; then
-      oefatal "XILINX_BOARD not defined ! Exiting"
-      exit 1
-   fi
-
-fi
 #now depending on the board type and arch do what is nessesary
 
-case "${XILINX_BOARD}" in
-     ML403)
-        oenote "ML403 board setup"
-        cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
+if [ -n "${XILINX_BSP_PATH}" ]; then
+	case "${XILINX_BOARD}" in
+		ml403 | ML403)
+			oenote "ML403 board setup"
+			cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
                 ${S}/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
-     ;;
-
-     *    ) 
-      oefatal "! Unknow Xilinx board ! Exiting..."
-      exit 1
-     ;;
-esac               
-
+		;;
+		ml507 | ML507)
+			oenote "Xilinx ML507 board setup"
+			dts=`find "${XILINX_BSP_PATH}" -name *.dts -print`
+			if [ -n "$dts" ]; then
+				oenote "Replacing device tree with ${dts}"
+				cp -pP ${dts} ${S}/arch/powerpc/boot/dts/virtex440-ml507.dts
+			else
+				oenote "Device tree not found in project dir"
+			fi
+		;;
+		*) 
+			oefatal "! Unknow Xilinx board ! Exit ..."
+			exit 1
+		;;
+	esac               
+else
+	oefatal "XILINX_BSP_PATH not defined ! Exit"
+	exit 1
+fi
 
 }
 
-
-
-
-
Signature · 1 line
1.6.6
#3 lore raw
In reply to Adrian Alonso

Can you make the commit log examples look like this:

http://wiki.openembedded.net/index.php/Commit_log_example

Do you know of any guides that could help me test this on my ml403? I would love to test this stuff!

Philip

Quoted 57 lines · Adrian Alonso

From: aalonso<[email protected]>

---
  conf/machine/include/tune-ppc440.inc |    2 +-
  conf/machine/xilinx-ml507.conf       |   33 +++++++++++++++++++++++++++++++++
  2 files changed, 34 insertions(+), 1 deletions(-)

create mode 100644 conf/machine/xilinx-ml507.conf

conf/machine/include/tune-ppc440.inc +1 -1
index feca186..6a56bfa 100644
@@ -1,4 +1,4 @@
  TARGET_CC_ARCH = "-mcpu=440"
  BASE_PACKAGE_ARCH = "ppc440"
  FEED_ARCH = "ppc440"
-PACKAGE_EXTRA_ARCHS += "ppc440e"
+PACKAGE_EXTRA_ARCHS += "ppc440"
conf/machine/xilinx-ml507.conf new file +33 -0
new file mode 100644
index 0000000..c376cfe
@@ -0,0 +1,33 @@
+# Copyright (C) 2010, Adrian Alonso<[email protected]>
+# Released under the MIT license (see packages/COPYING)
+#@TYPE: Machine
+#@Name: Xilinx ML507 FPGA Development Platform
+#@DESCRIPTION: Machine configuration for Xilinx ML507
+
+TARGET_ARCH = "powerpc"
+TARGET_CPU = "440"
+TARGET_FPU = "soft"
+#tune for the 440 cpu
+require conf/machine/include/tune-ppc440.inc
+
+#ASSUME_PROVIDED += "virtual/kernel"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+
+KERNEL_IMAGETYPE = "uImage"
+
+MACHINE_FEATURES = "kernel26 ext2 usbhost udev"
+MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
+
+UBOOT_ARCH = "ppc"
+UBOOT_MACHINE = "ml507_defconfig"
+
+# Xilinx EDK override paramater definitions for xilinx-bsp
+# Include in your local.conf
+# XILINX_BSP_PATH = "complete path for Xilinx EDK project"
+# XILINX_BOARD = "ml507"
+
+# Don't use tty1
+USE_VT = "0"
+SERIAL_CONSOLE = "115200 ttyS0"
+
+
#4 lore raw

Oops didn't know about the commit guide lines.

Actually I haven't found a guideline my self but some of the things that are needed to
support xilinx dev board are:

Linux kernel recipe with the ability to specify to build a simpleImage so we can program the fpga with a Jtag
u-boot recipe to preserve the u-boot elf image this also in early developing stage for programing the fpga.

All hardware changes performed in the fpga must generate a new device tree descriptor using Xilinx XPS tool and should be replaced in the Linux kernel and u-boot (actually some peripheral address in xparameters.h) to match with the fpga hardware model.

I'm also going to crate a repository with my hardware project to make available the hardware model (bitstream) used as target reference; and post on my blog how I'm trying to use OE with the ml507 target platform.

Quoted 79 lines · Philip Balister

Can you make the commit log examples look like this:

http://wiki.openembedded.net/index.php/Commit_log_example

Do you know of any guides that could help me test this on my ml403? I would love to test this stuff!

Philip

Quoted 51 lines · Adrian Alonso

From: aalonso<[email protected]>

---
 conf/machine/include/tune-ppc440.inc |    2 +-
 conf/machine/xilinx-ml507.conf       |   33
+++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletions(-)
 create mode 100644 conf/machine/xilinx-ml507.conf
conf/machine/include/tune-ppc440.inc +1 -1
index feca186..6a56bfa 100644
@@ -1,4 +1,4 @@
 TARGET_CC_ARCH = "-mcpu=440"
 BASE_PACKAGE_ARCH = "ppc440"
 FEED_ARCH = "ppc440"
-PACKAGE_EXTRA_ARCHS += "ppc440e"
+PACKAGE_EXTRA_ARCHS += "ppc440"
conf/machine/xilinx-ml507.conf new file +23 -0
new file mode 100644
index 0000000..c376cfe
@@ -0,0 +1,33 @@
+# Copyright (C) 2010, Adrian Alonso<[email protected]>
+# Released under the MIT license (see packages/COPYING)
+#@TYPE: Machine
+#@Name: Xilinx ML507 FPGA Development Platform
+#@DESCRIPTION: Machine configuration for Xilinx ML507
+
+TARGET_ARCH = "powerpc"
+TARGET_CPU = "440"
+TARGET_FPU = "soft"
+#tune for the 440 cpu
+require conf/machine/include/tune-ppc440.inc
+
+#ASSUME_PROVIDED += "virtual/kernel"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+
+KERNEL_IMAGETYPE = "uImage"
+
+MACHINE_FEATURES = "kernel26 ext2 usbhost udev"
+MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
+
+UBOOT_ARCH = "ppc"
+UBOOT_MACHINE = "ml507_defconfig"
+

conf/machine/xilinx-ml507.conf line 33

Quoted 10 lines
conf/machine/xilinx-ml507.conf new file +10 -0
+# Xilinx EDK override paramater definitions for xilinx-bsp
+# Include in your local.conf
+# XILINX_BSP_PATH = "complete path for Xilinx EDK project"
+# XILINX_BOARD = "ml507"
+
+# Don't use tty1
+USE_VT = "0"
+SERIAL_CONSOLE = "115200 ttyS0"
+
+

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 3 lines
Saludos
Adrian Alonso
http://aalonso.wordpress.com