Skip to contentSkip to conversation

linux.inc: add device tree for xilinx ml507 Signed-off-by: aalonso <[email protected]>

PATCH In review aalonso 2 participants 5 messages Feb 15, 2010 Arm/Zynq architecture

lore
Share & tools
lore

aalonso

author
#0 lore raw

PATCH 1/1 linux.inc: add device tree for xilinx ml507 Signed-off-by: aalonso <[email protected]>

---
 recipes/linux/linux.inc |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
recipes/linux/linux.inc +1 -0
index 7405c08..b562657 100644
@@ -38,6 +38,7 @@ KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
 KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
 KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
 KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
 
 KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
 
Signature · 1 line
1.6.6
author
#1 lore raw

PATCH 1/1 tune-ppc440.inc: add ppc440 to PACKAGE_EXTRA_ARCHS Signed-off-by: aalonso <[email protected]>

---
 conf/machine/include/tune-ppc440.inc |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
conf/machine/include/tune-ppc440.inc +1 -1
index feca186..0c41db4 100644
@@ -1,4 +1,4 @@
 TARGET_CC_ARCH = "-mcpu=440"
 BASE_PACKAGE_ARCH = "ppc440"
 FEED_ARCH = "ppc440"
-PACKAGE_EXTRA_ARCHS += "ppc440e"
+PACKAGE_EXTRA_ARCHS += "ppc440 ppc440e"
Signature · 1 line
1.6.6
author
#2 lore raw

PATCH 1/1 xilinx-bsp.bbclass: add support for xilinx ml507 Signed-off-by: aalonso <[email protected]>

---
 classes/xilinx-bsp.bbclass |   56 +++++++++++++++++++++----------------------
 1 files changed, 27 insertions(+), 29 deletions(-)
classes/xilinx-bsp.bbclass +27 -29
index f657e5b..c719b3b 100644
@@ -3,7 +3,7 @@
 #
 #This class handles all the intricasies of getting the required files from the 
 #ISE/EDK/project to the kernel and prepare the kernel for compilation.
-#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405) and Microblaze
+#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405,440) and Microblaze
 #Only the PowerPC BSP has been tested so far
 #For this to work correctly you need to add XILINX_BSP_PATH and XILINX_BOARD to your 
 #local.conf
@@ -12,42 +12,40 @@
 #
 #Currently supported boards
 #Xilinx ML403
+#Xilinx ML507
 #More to come soon ;)
 
 do_configure_prepend() {
 
-
 #first check that the XILINX_BSP_PATH and XILINX_BOARD have been defined in local.conf
-if [ -z "${XILINX_BSP_PATH}" ]; then
-   oefatal "XILINX_BSP_PATH not defined ! Exiting..."
-   exit 1
-
-else
-   if [ -z "${XILINX_BOARD}" ]; then
-      oefatal "XILINX_BOARD not defined ! Exiting"
-      exit 1
-   fi
-
-fi
 #now depending on the board type and arch do what is nessesary
 
-case "${XILINX_BOARD}" in
-     ML403)
-        oenote "ML403 board setup"
-        cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
+if [ -n "${XILINX_BSP_PATH}" ]; then
+	case "${XILINX_BOARD}" in
+		ml403 | ML403)
+			oenote "ML403 board setup"
+			cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
                 ${S}/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
-     ;;
-
-     *    ) 
-      oefatal "! Unknow Xilinx board ! Exiting..."
-      exit 1
-     ;;
-esac               
-
+		;;
+		ml507 | ML507)
+			oenote "Xilinx ML507 board setup"
+			dts=`find "${XILINX_BSP_PATH}" -name *.dts -print`
+			if [ -n "$dts" ]; then
+				oenote "Replacing device tree with ${dts}"
+				cp -pP ${dts} ${S}/arch/powerpc/boot/dts/virtex440-ml507.dts
+			else
+				oenote "Device tree not found in project dir"
+			fi
+		;;
+		*) 
+			oefatal "! Unknow Xilinx board ! Exit ..."
+			exit 1
+		;;
+	esac               
+else
+	oefatal "XILINX_BSP_PATH not defined ! Exit"
+	exit 1
+fi
 
 }
 
-
-
-
-
Signature · 1 line
1.6.6
author
#3 lore raw

PATCH 1/1 xilinx-ml507.conf: New config for xilinx ml507 devboard Signed-off-by: aalonso <[email protected]>

---
 conf/machine/xilinx-ml507.conf |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
 create mode 100644 conf/machine/xilinx-ml507.conf
conf/machine/xilinx-ml507.conf new file +33 -0
new file mode 100644
index 0000000..c376cfe
@@ -0,0 +1,33 @@
+# Copyright (C) 2010, Adrian Alonso <[email protected]>
+# Released under the MIT license (see packages/COPYING)
+#@TYPE: Machine
+#@Name: Xilinx ML507 FPGA Development Platform
+#@DESCRIPTION: Machine configuration for Xilinx ML507
+
+TARGET_ARCH = "powerpc"
+TARGET_CPU = "440"
+TARGET_FPU = "soft"
+#tune for the 440 cpu
+require conf/machine/include/tune-ppc440.inc
+
+#ASSUME_PROVIDED += "virtual/kernel"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+
+KERNEL_IMAGETYPE = "uImage"
+
+MACHINE_FEATURES = "kernel26 ext2 usbhost udev"
+MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
+
+UBOOT_ARCH = "ppc"
+UBOOT_MACHINE = "ml507_defconfig"
+
+# Xilinx EDK override paramater definitions for xilinx-bsp
+# Include in your local.conf
+# XILINX_BSP_PATH = "complete path for Xilinx EDK project"
+# XILINX_BOARD = "ml507"
+
+# Don't use tty1
+USE_VT = "0"
+SERIAL_CONSOLE = "115200 ttyS0"
+
+
Signature · 1 line
1.6.6
#4 lore raw
In reply to aalonso

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi!

It seems you fell victim to the "git needs blank line between summarry and body" maffia and git put everything in the subject line. Could you regenerate and resend please?

regards,

Koen

Quoted 9 lines · aalonso
---
 recipes/linux/linux.inc |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
recipes/linux/linux.inc +0 -0
index 7405c08..b562657 100644

recipes/linux/linux.inc KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts" · line 44

Quoted 7 lines
recipes/linux/linux.inc +1 -0
@@ -38,6 +38,7 @@ KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
 KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
 KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
 KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
 
 KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFLea1FMkyGM64RGpERArh3AKCLPoXbnPAhfNAVo+RFo0ybG906IACfeuaP 4Raof8c0plbGFLXVlU1jTxs=
=TIcr
-----END PGP SIGNATURE-----