input: Add KEY_RFKILL
Subsystems (3)
PATCH 1/2 input: Add KEY_RFKILL
Most laptops have keys that are intended to toggle all device state, not just wifi. These are currently generally mapped to KEY_WLAN. As a result, rfkill will only kill or enable wifi in response to the key press. This confuses users and can make it difficult for them to enable bluetooth and wwan devices.
This patch adds a new keycode, KEY_RFKILL. It indicates that the system should toggle the state of all rfkillable devices.
--- include/linux/input.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/input.h +1 -1
@@ -594,7 +594,7 @@ struct input_absinfo {#define KEY_NUMERIC_9 0x209#define KEY_NUMERIC_STAR 0x20a#define KEY_NUMERIC_POUND 0x20b - +#define KEY_RFKILL 0x20c/* Key that controls all radios */ #define KEY_CAMERA_FOCUS 0x210/* We avoid low common keys in module aliases so they don't get huge. */
Signature · 1 line
1.6.6.1
A message that is not in the archive (sent off-list or not yet received): 1266356185-10324-1-git-send-email-mjg-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
PATCH 2/2 rfkill: Add support for KEY_RFKILL
Add support for handling KEY_RFKILL in the rfkill input module. This simply toggles the state of all rfkill devices. The comment in rfkill.h is also updated to reflect that RFKILL_TYPE_ALL may be used inside the kernel.
--- include/linux/rfkill.h | 2 +- net/rfkill/input.c | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletions(-)
include/linux/rfkill.h +1 -1
@@ -29,7 +29,7 @@/** * enum rfkill_type - type of rfkill switch. * -* @RFKILL_TYPE_ALL: toggles all switches (userspace only) +* @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
net/rfkill/input.c +8 -0
@@ -212,6 +212,9 @@ static void rfkill_event(struct input_handle *handle, unsigned int type,case KEY_WIMAX :rfkill_schedule_toggle (RFKILL_TYPE_WIMAX );break ; +case KEY_RFKILL : +rfkill_schedule_toggle (RFKILL_TYPE_ALL ); +break ; } }else if (type ==EV_SW && code ==SW_RFKILL_ALL )rfkill_schedule_evsw_rfkillall (data);
@@ -295,6 +298,11 @@ static const struct input_device_id rfkill_ids[] = { .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, }, { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_RFKILL)] = BIT_MASK(KEY_RFKILL) }, + }, + { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, .evbit = { BIT(EV_SW) }, .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
Signature · 6 lines
1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] rfkill: Add support for KEY_RFKILL
Hi Matthew,
Quoted 6 lines
Add support for handling
KEY_RFKILLin the rfkill input module. This simply toggles the state of all rfkill devices. The comment inrfkill.his also updated to reflect thatRFKILL_TYPE_ALLmay be used inside the kernel.Signed-off-by Matthew Garrett <[email protected]>
looks good.
Regards
Marcel
Hi Matthew,
Quoted 10 lines
Most laptops have keys that are intended to toggle all device state, not just wifi. These are currently generally mapped to
KEY_WLAN. As a result, rfkill will only kill or enable wifi in response to the key press. This confuses users and can make it difficult for them to enable bluetooth and wwan devices.This patch adds a new keycode,
KEY_RFKILL. It indicates that the system should toggle the state of all rfkillable devices.Signed-off-by Matthew Garrett <[email protected]>
Regards
Marcel
Dmitry Torokhov
maintainerHI Matthew,
Quoted 19 lines · Matthew Garrett
Most laptops have keys that are intended to toggle all device state, not just wifi. These are currently generally mapped to
KEY_WLAN. As a result, rfkill will only kill or enable wifi in response to the key press. This confuses users and can make it difficult for them to enable bluetooth and wwan devices.This patch adds a new keycode,
KEY_RFKILL. It indicates that the system should toggle the state of all rfkillable devices.Signed-off-by Matthew Garrett <[email protected]>--- include/linux/input.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)include/linux/input.h +0
-0
include/linux/input.h struct input_absinfo { · line 599
Quoted 7 lines
include/linux/input.h +1
-1@@ -594,7 +594,7 @@ struct input_absinfo {#define KEY_NUMERIC_9 0x209#define KEY_NUMERIC_STAR 0x20a#define KEY_NUMERIC_POUND 0x20b - +#define KEY_RFKILL 0x20c/* Key that controls all radios */ #define KEY_CAMERA_FOCUS 0x210
I'd like some breathing room aroung KEY_NUMERIC? Any issues with making it 247 or 0x211?
Signature · 1 line
Dmitry
A message that is not in the archive (sent off-list or not yet received): 20100217052247.GD7160-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org
Quoted 2 lines · Dmitry Torokhov
I'd like some breathing room aroung
KEY_NUMERIC? Any issues with making it 247 or0x211?
None. Do you want to make that change, or should I resubmit?
Signature · 5 lines
Matthew Garrett | [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Matthew Garrett
Quoted 2 lines · Dmitry Torokhov
I'd like some breathing room aroung
KEY_NUMERIC? Any issues with making it 247 or0x211?None. Do you want to make that change, or should I resubmit?
Wait wait... do you can get another KEY_?
The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Regards, Chr.
A message that is not in the archive (sent off-list or not yet received): 22ee4e771002171043u2aaf97vd73c1090c2fce901-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
What's a WPS button? There's no fundamental issue with getting new KEY_ codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.
Signature · 5 lines
Matthew Garrett | [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 10 lines · Matthew Garrett
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
What's a WPS button? There's no fundamental issue with getting new
KEY_codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.
Won't be seen by most X applications. The server should definitely see it, so should applications that use XInput2-aware widget sets.
(Which obviously means not much at all right now).
A message that is not in the archive (sent off-list or not yet received): 1266432575.678.980.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 8 lines · Bastien Nocera
Quoted 7 lines · Matthew Garrett
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Quoted 8 lines
Quoted 3 lines
What's a WPS button? There's no fundamental issue with getting new
KEY_codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.Won't be seen by most X applications. The server should definitely see it, so should applications that use XInput2-aware widget sets.
(Which obviously means not much at all right now).
Because XKB2 never happened we don't actually have any way of configuring keysyms in the server for keys > 255 or getting this layout information to the client. So XI2 applications that want to use higher keycodes are reliant on the keycode itself which is strictly speaking random - at least the protocol makes no guarantee that they remain fixed.
In practice that's not quite true and the keycodes are likely to remain fixed but relying on that hurt us quite badly in the keyboard -> evdev conversion.
Cheers,
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Dmitry Torokhov
maintainerQuoted 24 lines · Peter Hutterer
Quoted 8 lines · Bastien Nocera
Quoted 7 lines · Matthew Garrett
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Quoted 8 lines
Quoted 3 lines
What's a WPS button? There's no fundamental issue with getting new
KEY_codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.Won't be seen by most X applications. The server should definitely see it, so should applications that use XInput2-aware widget sets.
(Which obviously means not much at all right now).
Because XKB2 never happened we don't actually have any way of configuring keysyms in the server for keys > 255 or getting this layout information to the client. So XI2 applications that want to use higher keycodes are reliant on the keycode itself which is strictly speaking random - at least the protocol makes no guarantee that they remain fixed.
Quoted 4 lines
In practice that's not quite true and the keycodes are likely to remain fixed but relying on that hurt us quite badly in the keyboard -> evdev conversion.
FWIW the event codes defines in linux/input.h form ABI and thus will not be changed (exception is adding aliases better describing intended key usage, such as KEY_COFFEE -> KEY_SCREENLOCK).
Signature · 1 line
Dmitry
A message that is not in the archive (sent off-list or not yet received): 20100218041636.GA19037-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org
Quoted 25 lines · Dmitry Torokhov
Quoted 24 lines · Peter Hutterer
Quoted 8 lines · Bastien Nocera
Quoted 7 lines · Matthew Garrett
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Quoted 8 lines
Quoted 3 lines
What's a WPS button? There's no fundamental issue with getting new
KEY_codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.Won't be seen by most X applications. The server should definitely see it, so should applications that use XInput2-aware widget sets.
(Which obviously means not much at all right now).
Because XKB2 never happened we don't actually have any way of configuring keysyms in the server for keys > 255 or getting this layout information to the client. So XI2 applications that want to use higher keycodes are reliant on the keycode itself which is strictly speaking random - at least the protocol makes no guarantee that they remain fixed.
Quoted 8 lines
Quoted 4 lines
In practice that's not quite true and the keycodes are likely to remain fixed but relying on that hurt us quite badly in the keyboard -> evdev conversion.
FWIW the event codes defines in
linux/input.hform ABI and thus will not be changed (exception is adding aliases better describing intended key usage, such asKEY_COFFEE->KEY_SCREENLOCK).
of course. the problem that would arise is that if a driver starts using a different source for keycodes - such as happend when we changed from the old keyboard driver to evdev. for years the keycodes remained the same and applications relied on them. when we then started using evdev as the keyboard driver a number of keycodes changed and some apps misbehaved. (you may remember the Up/PrintScreen issues).
It is in fact still somewhat of an issue if you're using evdev and the kbd driver at the same time - though the sensible use-cases for this scenario are somewhat narrow.
Relying on keycodes - even if they're abi - is generally dangerous as it circumvents the keyboard layouts configured by the users. After some talks to our input methods guys it was shown that some input methods only work on a qwerty layout but break rather badly on a azerty layout. And an anecdote from our office - a password generator dongle started typing in wrong passwords when it was accidentally configured with dvorak instead of qwerty. Since the dongle could only send keycodes - which were then converted into the keysyms depending on the layout - some of the passwords didn't match up anymore.
So - for client applications to rely on keycodes is a time-bomb, we really need to get our act together and allow for 32-bit keycode layout configuration in X.
Cheers,
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · Matthew Garrett
Quoted 4 lines · Christian Lamparter
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
What's a WPS button?
The Idea of this button is to "hook up" to WPS network with a simple push of two buttons.
(One on the AP, another one at the STA).
That's right: no SSID and no keys.
Quoted 3 lines
There's no fundamental issue with getting new
KEY_
codes defined, but bear in mind that anything greater than 255 won't be seen by X at present.
it would be great to get the "Push" event to Network Manager/ or any other wpa_supplicant GUI du jour one day.
In the mean time, it would help to have a common scan-code ready.
Dmitry Torokhov
maintainerQuoted 6 lines · Christian Lamparter
Quoted 5 lines · Matthew Garrett
Quoted 2 lines · Dmitry Torokhov
I'd like some breathing room aroung
KEY_NUMERIC? Any issues with making it 247 or0x211?
Quoted 7 lines
Quoted 2 lines
None. Do you want to make that change, or should I resubmit?
Wait wait... do you can get another
KEY_?The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Yes, we can add a new key definition if you provide clear description of what the intended use is and if we can't map such use to any existing key definitions.
Signature · 1 line
Dmitry
A message that is not in the archive (sent off-list or not yet received): 20100217191708.GA15554-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org
Quoted 7 lines · Dmitry Torokhov
Quoted 3 lines · Christian Lamparter
The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Yes, we can add a new key definition if you provide clear description of what the intended use is and if we can't map such use to any existing key definitions.
I found one http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup (if you don't mind):
There's the relevant part: (PBC stands for Push Button Control/Configuration?)
"PBC Method, in which the user simply has to push a button, either an actual or virtual one, on both the AP (or a Registrar of the Network) and the new wireless client device (STA)
.
Support of this model is mandatory for APs and optional for STAs."
And there are already a few potential users:
OpenWRT routers as well as some rt30xx, ar9170 and ar9271 devices. --
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Dmitry Torokhov
maintainerQuoted 15 lines · Christian Lamparter
Quoted 7 lines · Dmitry Torokhov
Quoted 3 lines · Christian Lamparter
The reason: Some new devices come with a WPS "Push Button". And there's no code for them yet.
Yes, we can add a new key definition if you provide clear description of what the intended use is and if we can't map such use to any existing key definitions.
I found one http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup (if you don't mind):
There's the relevant part: (PBC stands for Push Button Control/Configuration?)
Quoted 8 lines
"PBC Method, in which the user simply has to push a button, either an actual or virtual one, on both the AP (or a Registrar of the Network) and the new wireless client device (STA)
.
Support of this model is mandatory for APs and optional for STAs."And there are already a few potential users:
OpenWRT routers as well as some rt30xx, ar9170 and ar9271 devices.
Is there anything currently in works that would make use of this button? I do not want to allocate keycode "for the future" which may never come. We did it with KEY_BATTERY but I do not think anyone actually uses it.
Signature · 1 line
Dmitry
Quoted 3 lines · Dmitry Torokhov
Is there anything currently in works that would make use of this button? I do not want to allocate keycode "for the future" which may never come. We did it with
KEY_BATTERYbut I do not think anyone actually uses it.
KEY_BATTERY is heavily used in userspace. I think all the hardware that generates it does so via i8042 rather than a platform driver, so it wouldn't show up in the kernel.
Signature · 1 line
Matthew Garrett | [email protected]
Dmitry Torokhov
maintainerQuoted 10 lines · Matthew Garrett
Quoted 3 lines · Dmitry Torokhov
Is there anything currently in works that would make use of this button? I do not want to allocate keycode "for the future" which may never come. We did it with
KEY_BATTERYbut I do not think anyone actually uses it.
KEY_BATTERYis heavily used in userspace. I think all the hardware that generates it does so via i8042 rather than a platform driver, so it wouldn't show up in the kernel.
Ah, I see. I hope the keycode is not used to signal battery status change but to invoke battery/power manager applet...
Signature · 1 line
Dmitry
A message that is not in the archive (sent off-list or not yet received): 446821D4-8E9D-4701-9A50-04738C5733B6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Quoted 10 lines · Dmitry Torokhov
Quoted 5 lines · Matthew Garrett
KEY_BATTERYis heavily used in userspace. I think all the hardware that
generates it does so via i8042 rather than a platform driver, so it wouldn't show up in the kernel.Ah, I see. I hope the keycode is not used to signal battery status change but to invoke battery/power manager applet...
Correct. On Gnome, at least, it pops up a dialog with the current battery state.
Signature · 5 lines
Matthew Garrett | [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines · Dmitry Torokhov
Is there anything currently in works that would make use of this button? I do not want to allocate keycode "for the future" which may never come. We did it with
KEY_BATTERYbut I do not think anyone actually uses it.
Of course, there are lots of routers:
Linksys: wrt160nl
Netgear: wnr2000, wndr3700
TP-Link: wr1043n, ... wr741nd
TrendNET: TEW-632BRP
Planex: MZK-W300NH, MZK-W04NU
...
And a few new client adapters, I know about:
TP-Link: WN821 v2, WN721N, WN727N
Netgear: WNDA3100 v2
...
(Not to mention all the coming products).
A message that is not in the archive (sent off-list or not yet received): 22ee4e771002171218t69cc4348ia0300a645ce9763d-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 16 lines · Christian Lamparter
Quoted 4 lines · Dmitry Torokhov
Is there anything currently in works that would make use of this button? I do not want to allocate keycode "for the future" which may never come. We did it with
KEY_BATTERYbut I do not think anyone actually uses it.Of course, there are lots of routers:
Linksys: wrt160nl
Netgear: wnr2000, wndr3700
TP-Link: wr1043n, ... wr741nd
TrendNET: TEW-632BRP
Planex: MZK-W300NH, MZK-W04NU
...
Quoted 6 lines
And a few new client adapters, I know about:
TP-Link: WN821 v2, WN721N, WN727N
Netgear: WNDA3100 v2
...(Not to mention all the coming products).
Sorry, I was not clear enough. I meant something in works in Linux software stack, I was aware that certain router have these buttons already.
Signature · 6 lines
Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 069C4DAE-598D-45F1-99B5-DA5BAF718179-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Quoted 1 line · Dmitry Torokhov
On Feb 17, 2010, at 12:18 PM, Christian Lamparter
<chunkeey-gM/[email protected]
Quoted 26 lines
Quoted 26 lines
wrote:
Quoted 7 lines · Dmitry Torokhov
Is there anything currently in works that would make use of this button?
I do not want to allocate keycode "for the future" which may never come.
We did it withKEY_BATTERYbut I do not think anyone actually uses it.Of course, there are lots of routers:
Linksys: wrt160nl
Netgear: wnr2000, wndr3700
TP-Link: wr1043n, ... wr741nd
TrendNET: TEW-632BRP
Planex: MZK-W300NH, MZK-W04NU
...And a few new client adapters, I know about:
TP-Link: WN821 v2, WN721N, WN727N
Netgear: WNDA3100 v2
...
Quoted 5 lines
Quoted 1 line
(Not to mention all the coming products).
Sorry, I was not clear enough. I meant something in works in Linux software stack, I was aware that certain router have these buttons already.
I know that the hostapd config file has an entire WPS section, but have no experience using WPS, so can't speak as to how to configure or use it. I don't know if it's planned to include support for a push button trigger.
from hostapd.conf in git:
# Config Methods
# List of the supported configuration methods
# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
# nfc_interface push_button keypad
#config_methods=label display push_button keypad
Pat Erley
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines · Dmitry Torokhov
Sorry, I was not clear enough. I meant something in works in Linux software stack, I was aware that certain router have these buttons already.
wpa_supplicant and hostapd's CLI have this wps_pbc command. It's more a question of: what application will get to receive the event.
A message that is not in the archive (sent off-list or not yet received): 22ee4e771002171328w3c9cbb8n663c291e9d3634e5-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 9 lines · Christian Lamparter
Quoted 4 lines · Dmitry Torokhov
Sorry, I was not clear enough. I meant something in works in Linux software stack, I was aware that certain router have these buttons already.
wpa_supplicantand hostapd's CLI have thiswps_pbccommand. It's more a question of: what application will get to receive the event.
Right. So as soon as you have an idea about userspace consumer for the event ping me and I'd be glad to add a key definition for the event.
Signature · 5 lines
Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 11 lines · Dmitry Torokhov
Quoted 8 lines · Christian Lamparter
Quoted 5 lines · Dmitry Torokhov
Sorry, I was not clear enough. I meant something in works in Linux software
stack, I was aware that certain router have these buttons already.
Quoted 5 lines
Quoted 2 lines
wpa_supplicantand hostapd's CLI have thiswps_pbccommand. It's more a question of: what application will get to receive the event.Right. So as soon as you have an idea about userspace consumer for the event ping me and I'd be glad to add a key definition for the event.
Idea? Be a bit more specific...
As a matter of fact, there are a few potential consumer in the kernel:
arm/mach-kirkwood/mv88f6281gtw_ge-setup.c:
.code = KEY_F1, .gpio = 46, .desc = "WPS Button(F1)", .active_low = 1,
arm/mach-orion5x/wrt350n-v2-setup.c:
.code = KEY_WLAN, .gpio = 2, .desc = "WPS Button", .active_low = 1,
and there's a lot more "out-off-tree":
https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/files/arch/mips/ar71xx
mach-tew-632brp.c:
.desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = TEW_632BRP_GPIO_BTN_WPS,
carl9170:input_set_capability(input, EV_KEY, BTN_0);
as you can see, people are using BTN_1, BTN_0, F1, WLAN (rfkill?) as WPS Button substitute. Maybe it would be a good idea to get it right now!
A message that is not in the archive (sent off-list or not yet received): 22ee4e771002171403o6f0b99e8qd683d78e74fe4522-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 47 lines · Christian Lamparter
Quoted 11 lines · Dmitry Torokhov
Quoted 8 lines · Christian Lamparter
Quoted 5 lines · Dmitry Torokhov
Sorry, I was not clear enough. I meant something in works in Linux software
stack, I was aware that certain router have these buttons already.Quoted 5 lines
Quoted 2 lines
wpa_supplicantand hostapd's CLI have thiswps_pbccommand. It's more a question of: what application will get to receive the event.Right. So as soon as you have an idea about userspace consumer for the event ping me and I'd be glad to add a key definition for the event.
Idea? Be a bit more specific...
As a matter of fact, there are a few potential consumer in the kernel:
arm/mach-kirkwood/mv88f6281gtw_ge-setup.c:.code = KEY_F1, .gpio = 46, .desc = "WPS Button(F1)", .active_low = 1,
arm/mach-orion5x/wrt350n-v2-setup.c:.code = KEY_WLAN, .gpio = 2, .desc = "WPS Button", .active_low = 1,and there's a lot more "out-off-tree":
https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/files/arch/mips/ar71xx
mach-tew-632brp.c:.desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = TEW_632BRP_GPIO_BTN_WPS,
Quoted 7 lines
carl9170:
input_set_capability(input, EV_KEY, BTN_0);as you can see, people are using
BTN_1,BTN_0, F1, WLAN (rfkill?) as WPS Button substitute. Maybe it would be a good idea to get it right now!
I see, then I will be queueing the patch below...
Signature · 14 lines
Dmitry Input: add KEY_WPS_BUTTON definition The new key definition is supposed to be used for buttons that initiate WiFi Protected Setup sequence: http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup Signed-off-by: Dmitry Torokhov <dtor-JGs/[email protected]> --- include/linux/input.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
include/linux/input.h +1 -0
@@ -597,6 +597,7 @@ struct input_absinfo {#define KEY_NUMERIC_POUND 0x20b#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211/* WiFi Protected Setup key */ /* We avoid low common keys in module aliases so they don't get huge. */ #define KEY_MIN_INTERESTING KEY_MUTE
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line · Dmitry Torokhov
We did it with
KEY_BATTERYbut I do not think anyone actually uses it.
thinkpad-acpi does (in-tree).
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Dmitry Torokhov
maintainerQuoted 7 lines · Matthew Garrett
Quoted 2 lines · Dmitry Torokhov
I'd like some breathing room aroung
KEY_NUMERIC? Any issues with making it 247 or0x211?None. Do you want to make that change, or should I resubmit?
I'll change to 247 then.
Thanks.
Signature · 1 line
Dmitry