sysfs lockdep complaint
Subsystems (2)
Get this when powernowd starts on my G5:
[ 30.490674] =============================================
[ 30.490708] [ INFO: possible recursive locking detected ]
[ 30.490727] 2.6.33-rc8-wl-64012-g6917413 #160
[ 30.490744] ---------------------------------------------
[ 30.490763] powernowd/2577 is trying to acquire lock:
[ 30.490782] (s_active){++++.+}, at: [<c0000000001efa94>] .sysfs_addrm_finish+0x58/0xc0
[ 30.490831]
[ 30.490833] but task is already holding lock:
[ 30.490854] (s_active){++++.+}, at: [<c0000000001eff80>] .sysfs_get_active_two+0x3c/0x84
[ 30.490895]
[ 30.490896] other info that might help us debug this:
[ 30.490921] 4 locks held by powernowd/2577:
[ 30.490936] #0: (&buffer->mutex){+.+.+.}, at: [<c0000000001ed8d0>] .sysfs_write_file+0x60/0x1a4
[ 30.490983] #1: (s_active){++++.+}, at: [<c0000000001eff80>] .sysfs_get_active_two+0x3c/0x84
[ 30.491028] #2: (s_active){++++.+}, at: [<c0000000001eff98>] .sysfs_get_active_two+0x54/0x84
[ 30.491073] #3: (dbs_mutex){+.+.+.}, at: [<d000000002c9c6e8>] .cpufreq_governor_dbs+0x424/0x548 [cpufreq_ondemand]
[ 30.491128]
[ 30.491130] stack backtrace:
[ 30.491148] Call Trace:
[ 30.491166] [c00000021251af10] [c000000000012934] .show_stack+0xc0/0x200 (unreliable)
[ 30.491205] [c00000021251afe0] [c0000000005a74b0] .dump_stack+0x28/0x3c
[ 30.491234] [c00000021251b060] [c0000000000b88c8] .validate_chain+0x758/0x1044
[ 30.491265] [c00000021251b1a0] [c0000000000b9b94] .__lock_acquire+0x9e0/0xac4
[ 30.491294] [c00000021251b2d0] [c0000000000b9dc8] .lock_acquire+0x150/0x19c
[ 30.491324] [c00000021251b3a0] [c0000000001eeeb8] .sysfs_deactivate+0xd0/0x16c
[ 30.491354] [c00000021251b4f0] [c0000000001efa94] .sysfs_addrm_finish+0x58/0xc0
[ 30.491385] [c00000021251b590] [c0000000001ecb98] .sysfs_hash_and_remove+0x7c/0xb0
[ 30.491416] [c00000021251b640] [c0000000001f1710] .sysfs_remove_group+0xb4/0x138
[ 30.491450] [c00000021251b6e0] [d000000002c9c6f8] .cpufreq_governor_dbs+0x434/0x548 [cpufreq_ondemand]
[ 30.491487] [c00000021251b7e0] [c0000000004cc3e4] .__cpufreq_governor+0x1cc/0x250
[ 30.491520] [c00000021251b890] [c0000000004cdb90] .__cpufreq_set_policy+0x1f8/0x2a8
[ 30.491552] [c00000021251b940] [c0000000004ce1a0] .store_scaling_governor+0x1c0/0x21c
[ 30.491584] [c00000021251bb50] [c0000000004cd954] .store+0x98/0xdc
[ 30.491611] [c00000021251bc00] [c0000000001ed9a4] .sysfs_write_file+0x134/0x1a4
[ 30.491644] [c00000021251bcc0] [c000000000176ca0] .vfs_write+0xe8/0x1fc
[ 30.491672] [c00000021251bd70] [c000000000176ef0] .SyS_write+0x68/0xb0
[ 30.491700] [c00000021251be30] [c0000000000075d4] syscall_exit+0x0/0x40Quoted 12 lines · Johannes Berg
Get this when powernowd starts on my G5:
[ 30.490674] =============================================
[ 30.490708] [ INFO: possible recursive locking detected ]
[ 30.490727] 2.6.33-rc8-wl-64012-g6917413 #160
[ 30.490744] ---------------------------------------------
[ 30.490763] powernowd/2577 is trying to acquire lock:
[ 30.490782] (s_active){++++.+}, at: [<c0000000001efa94>] .sysfs_addrm_finish+0x58/0xc0 [ 30.490831]
[ 30.490833] but task is already holding lock:
[ 30.490854] (s_active){++++.+}, at: [<c0000000001eff80>] .sysfs_get_active_two+0x3c/0x84 [ 30.490895]
This should be fixed by the patchset from Eric:
Quoted 3 lines · Américo Wang
This should be fixed by the patchset from Eric:
That patchset doesn't even compile.
johannes
--- drivers/pci/pci-sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/pci-sysfs.c +2 -2
@@ -642,7 +642,7 @@ void pci_create_legacy_files(struct pci_if (!b->legacy_io) goto kzalloc_err; -sysfs_bin_attr_init (&b->legacy_io); +sysfs_bin_attr_init (b->legacy_io); b->legacy_io->attr.name ="legacy_io" ; b->legacy_io->size =0xffff ; b->legacy_io->attr.mode =S_IRUSR |S_IWUSR ;
@@ -655,8 +655,8 @@ void pci_create_legacy_files(struct pci_ goto legacy_io_err;/* Allocated above after the legacy_io struct */ -sysfs_bin_attr_init (&b->legacy_mem); b->legacy_mem = b->legacy_io +1 ; +sysfs_bin_attr_init (b->legacy_mem); b->legacy_mem->attr.name ="legacy_mem" ; b->legacy_mem->size =1024 *1024 ; b->legacy_mem->attr.mode =S_IRUSR |S_IWUSR ;
Quoted 8 lines · Johannes Berg
Quoted 3 lines · Américo Wang
This should be fixed by the patchset from Eric:
That patchset doesn't even compile.
Wow. I didn't notice that.
Eric, could you fix your last patch? I mean your patch 4/4, probably.
Greg?
Quoted 29 lines
johannes
---
drivers/pci/pci-sysfs.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/pci/pci-sysfs.c +2
-2@@ -642,7 +642,7 @@ void pci_create_legacy_files(struct pci_if (!b->legacy_io) goto kzalloc_err; -sysfs_bin_attr_init (&b->legacy_io); +sysfs_bin_attr_init (b->legacy_io); b->legacy_io->attr.name ="legacy_io" ; b->legacy_io->size =0xffff ; b->legacy_io->attr.mode =S_IRUSR |S_IWUSR ;@@ -655,8 +655,8 @@ void pci_create_legacy_files(struct pci_ goto legacy_io_err;/* Allocated above after the legacy_io struct */ -sysfs_bin_attr_init (&b->legacy_mem); b->legacy_mem = b->legacy_io +1 ; +sysfs_bin_attr_init (b->legacy_mem); b->legacy_mem->attr.name ="legacy_mem" ; b->legacy_mem->size =1024 *1024 ; b->legacy_mem->attr.mode =S_IRUSR |S_IWUSR ;
Signature · 1 line
Live like a child, think like the god.
Quoted 4 lines · Américo Wang
drivers/pci/pci-sysfs.c void pci_create_legacy_files(struct pci_ · line 659
Quoted 4 lines
/* Allocated above after the legacy_io struct */drivers/pci/pci-sysfs.c +0
-1-sysfs_bin_attr_init (&b->legacy_mem);b->legacy_mem = b->legacy_io + 1;drivers/pci/pci-sysfs.c +1
-0+sysfs_bin_attr_init (b->legacy_mem);
Also note the reordering to make it not crash ...
johannes
Quoted 14 lines · Américo Wang
Quoted 8 lines · Johannes Berg
Get this when powernowd starts on my G5:
[ 30.490674] ============================================= [ 30.490708] [ INFO: possible recursive locking detected ] [ 30.490727] 2.6.33-rc8-wl-64012-g6917413 #160 [ 30.490744] --------------------------------------------- [ 30.490763] powernowd/2577 is trying to acquire lock: [ 30.490782] (s_active){++++.+}, at: [<c0000000001efa94>].sysfs_addrm_finish+0x58/0xc0
Quoted 3 lines
[ 30.490831] [ 30.490833] but task is already holding lock: [ 30.490854] (s_active){++++.+}, at: [<c0000000001eff80>]
Quoted 6 lines
.sysfs_get_active_two+0x3c/0x84
Quoted 1 line
[ 30.490895]This should be fixed by the patchset from Eric:
Oh wow, well ..... I get like a thousand of these now:
BUG: key c0000002165eb478 not in .data!
instead of the lockdep complaint above.
johannes
Quoted 20 lines · Johannes Berg
Quoted 19 lines · Américo Wang
Quoted 8 lines · Johannes Berg
Get this when powernowd starts on my G5:
[ 30.490674] ============================================= [ 30.490708] [ INFO: possible recursive locking detected ] [ 30.490727] 2.6.33-rc8-wl-64012-g6917413 #160 [ 30.490744] --------------------------------------------- [ 30.490763] powernowd/2577 is trying to acquire lock: [ 30.490782] (s_active){++++.+}, at: [<c0000000001efa94>].sysfs_addrm_finish+0x58/0xc0
Quoted 3 lines
[ 30.490831] [ 30.490833] but task is already holding lock: [ 30.490854] (s_active){++++.+}, at: [<c0000000001eff80>].sysfs_get_active_two+0x3c/0x84
Quoted 1 line
[ 30.490895]This should be fixed by the patchset from Eric:
Quoted 8 lines
Quoted 1 line
Oh wow, well ..... I get like a thousand of these now:
BUG: key c0000002165eb478 not in .data!instead of the lockdep complaint above.
I am not surprised. :)
Please send us the backtraces you got, we could expect this.
Thank you.
Quoted 8 lines · Américo Wang
Quoted 4 lines
BUG: key c0000002165eb478 not in .data!instead of the lockdep complaint above.
I am not surprised. :)
Please send us the backtraces you got, we could expect this.
I hacked in dump_stack() but it overflowed my log buffer, here's an example:
[ 31.625411] BUG: key c0000002134f2ab0 not in .data! [ 31.625414] Call Trace: [ 31.625417] [c000000213b677c0] [c000000000012c1c] .show_stack+0xc0/0x200 (unreliable) [ 31.625423] [c000000213b67890] [c0000000005ac968] .dump_stack+0x28/0x3c [ 31.625428] [c000000213b67910] [c0000000000b6a3c] .lockdep_init_map+0x11c/0x674 [ 31.625433] [c000000213b67a10] [c0000000001efd90] .sysfs_add_file_mode+0x90/0x124 [ 31.625438] [c000000213b67ad0] [c0000000001efe60] .sysfs_add_file+0x3c/0x50 [ 31.625442] [c000000213b67b70] [c0000000001f2f40] .sysfs_create_bin_file+0x5c/0x78 [ 31.625448] [c000000213b67c10] [c0000000000cd0b0] .load_module+0x16a4/0x197c [ 31.625452] [c000000213b67d80] [c0000000000cd424] .SyS_init_module+0x9c/0x2d4 [ 31.625457] [c000000213b67e30] [c0000000000075d4] syscall_exit+0x0/0x40
There's also
[ 34.776604] BUG: key c000000216265388 not in .data! [ 34.776606] Call Trace: [ 34.776609] [c000000213b5f7a0] [c000000000012c1c] .show_stack+0xc0/0x200 (unreliable) [ 34.776615] [c000000213b5f870] [c0000000005ac968] .dump_stack+0x28/0x3c [ 34.776620] [c000000213b5f8f0] [c0000000000b6a3c] .lockdep_init_map+0x11c/0x674 [ 34.776624] [c000000213b5f9f0] [c0000000001efd90] .sysfs_add_file_mode+0x90/0x124 [ 34.776629] [c000000213b5fab0] [c0000000001f32b4] .internal_create_group+0x168/0x24c [ 34.776634] [c000000213b5fb70] [c0000000001f3420] .sysfs_create_group+0x38/0x50 [ 34.776639] [c000000213b5fc10] [c0000000000ccf20] .load_module+0x1514/0x197c [ 34.776644] [c000000213b5fd80] [c0000000000cd424] .SyS_init_module+0x9c/0x2d4 [ 34.776649] [c000000213b5fe30] [c0000000000075d4] syscall_exit+0x0/0x40
and many many times...
Let me recompile with that dump_stack() removed.
johannes
Quoted 26 lines · Johannes Berg
Quoted 8 lines · Américo Wang
Quoted 4 lines
BUG: key c0000002165eb478 not in .data!instead of the lockdep complaint above.
I am not surprised. :)
Please send us the backtraces you got, we could expect this.
I hacked in
dump_stack()but it overflowed my log buffer, here's an example:[ 31.625411] BUG: key c0000002134f2ab0 not in .data! [ 31.625414] Call Trace: [ 31.625417] [c000000213b677c0] [c000000000012c1c] .show_stack+0xc0/0x200 (unreliable) [ 31.625423] [c000000213b67890] [c0000000005ac968] .dump_stack+0x28/0x3c [ 31.625428] [c000000213b67910] [c0000000000b6a3c] .lockdep_init_map+0x11c/0x674 [ 31.625433] [c000000213b67a10] [c0000000001efd90] .sysfs_add_file_mode+0x90/0x124 [ 31.625438] [c000000213b67ad0] [c0000000001efe60] .sysfs_add_file+0x3c/0x50 [ 31.625442] [c000000213b67b70] [c0000000001f2f40] .sysfs_create_bin_file+0x5c/0x78 [ 31.625448] [c000000213b67c10] [c0000000000cd0b0] .load_module+0x16a4/0x197c [ 31.625452] [c000000213b67d80] [c0000000000cd424] .SyS_init_module+0x9c/0x2d4 [ 31.625457] [c000000213b67e30] [c0000000000075d4] syscall_exit+0x0/0x40There's also
Quoted 12 lines
[ 34.776604] BUG: key c000000216265388 not in .data! [ 34.776606] Call Trace: [ 34.776609] [c000000213b5f7a0] [c000000000012c1c] .show_stack+0xc0/0x200 (unreliable) [ 34.776615] [c000000213b5f870] [c0000000005ac968] .dump_stack+0x28/0x3c [ 34.776620] [c000000213b5f8f0] [c0000000000b6a3c] .lockdep_init_map+0x11c/0x674 [ 34.776624] [c000000213b5f9f0] [c0000000001efd90] .sysfs_add_file_mode+0x90/0x124 [ 34.776629] [c000000213b5fab0] [c0000000001f32b4] .internal_create_group+0x168/0x24c [ 34.776634] [c000000213b5fb70] [c0000000001f3420] .sysfs_create_group+0x38/0x50 [ 34.776639] [c000000213b5fc10] [c0000000000ccf20] .load_module+0x1514/0x197c [ 34.776644] [c000000213b5fd80] [c0000000000cd424] .SyS_init_module+0x9c/0x2d4 [ 34.776649] [c000000213b5fe30] [c0000000000075d4] syscall_exit+0x0/0x40
Thanks!
This could be fixed by the following.
---
kernel/module.c +2 -0
@@ -1085,6 +1085,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, sect_attrs->nsections++; sattr->mattr.show = module_sect_show; sattr->mattr.store =NULL ; +sysfs_attr_init (&sattr->mattr.attr); sattr->mattr.attr.name = sattr->name; sattr->mattr.attr.mode =S_IRUGO ; *(gattr++) = &(sattr++)->mattr.attr;
@@ -1178,6 +1179,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,if (sect_empty (&sechdrs[i]))continue ;if (sechdrs[i].sh_type ==SHT_NOTE ) { +sysfs_bin_attr_init (nattr); nattr->attr.name = mod->sect_attrs->attrs[loaded].name; nattr->attr.mode =S_IRUGO ; nattr->size = sechdrs[i].sh_size;
Quoted 1 line · Américo Wang
Please send us the backtraces you got, we could expect this.
The first one is fun:
[ 1.576226] windfarm: initializing for dual-core desktop G5 [ 1.577182] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577190] ------------[ cut here ]------------ [ 1.577192] Badness at kernel/lockdep.c:2706 [ 1.577196] NIP: c0000000000b6a68 LR: c0000000000b6a4c CTR: c0000000003afedc [ 1.577200] REGS: c000000216197620 TRAP: 0700 Not tainted (2.6.33-rc8-wl-64022-gcdee415-dirty) [ 1.577203] MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 28000082 XER: 200fffff [ 1.577214] TASK = c000000216198000[1] 'swapper' THREAD: c000000216194000 CPU: 2 [ 1.577217] GPR00: 0000000000000000 c0000002161978a0 c000000000b10328 0000000000000001 [ 1.577223] GPR04: 0000000000000001 c000000000071638 0000000000000000 0000000000000002 [ 1.577229] GPR08: 0000000000000000 c0000000014320f0 0000000000000001 c000000000b27638 [ 1.577235] GPR12: 0000000000000041 c000000000b21880 0000000000000056 0000000001400000 [ 1.577241] GPR16: 0000000000240ee0 c000000000718923 c0000000007ff6ec 000000000000005e [ 1.577247] GPR20: 00000000ffb30f40 c0000000007188b9 0000000000000000 0000000000240ed0 [ 1.577253] GPR24: 0000000000000108 0000000000000000 fffffffffffffff4 c00000021488b000 [ 1.577259] GPR28: 6b6b6b6b6b6b6b6b c00000021488bcc8 c000000000a77780 c0000002161978a0 [ 1.577271] NIP [c0000000000b6a68] .lockdep_init_map+0x148/0x66c [ 1.577276] LR [c0000000000b6a4c] .lockdep_init_map+0x12c/0x66c [ 1.577278] Call Trace: [ 1.577282] [c0000002161978a0] [c0000000000b6a34] .lockdep_init_map+0x114/0x66c (unreliable) [ 1.577289] [c0000002161979a0] [c0000000001efd88] .sysfs_add_file_mode+0x90/0x124 [ 1.577294] [c000000216197a60] [c0000000001efe58] .sysfs_add_file+0x3c/0x50 [ 1.577299] [c000000216197b00] [c0000000001effb4] .sysfs_create_file+0x5c/0x74 [ 1.577305] [c000000216197ba0] [c0000000004292b0] .device_create_file+0x40/0x5c [ 1.577311] [c000000216197c40] [c000000000441178] .wf_register_control+0x108/0x178 [ 1.577316] [c000000216197cf0] [c0000000004440a4] .smu_fan_create+0x548/0x598 [ 1.577323] [c000000216197da0] [c0000000007e5e6c] .smu_controls_init+0xb0/0x1f4 [ 1.577329] [c000000216197e40] [c0000000000084e4] .do_one_initcall+0xac/0x204 [ 1.577335] [c000000216197ef0] [c0000000007b84b8] .kernel_init+0x1f0/0x270 [ 1.577340] [c000000216197f90] [c000000000028f8c] .kernel_thread+0x54/0x70 [ 1.577343] Instruction dump: [ 1.577346] e93e81c8 80090000 2f800000 409e04f4 482fa5e9 60000000 2fa30000 419e04e4 [ 1.577355] e93e81d0 80090000 2f800000 409e04d4 <0fe00000> 480004cc fb9d0000 e93e8018 [ 1.577375] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577385] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577397] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577413] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577423] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577435] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577446] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.839465] BUG: key 6b6b6b6b6b6b6b6b not in .data!
key pointing to something freed? wtf?
johannes
Quoted 28 lines · Johannes Berg
Quoted 1 line · Américo Wang
Please send us the backtraces you got, we could expect this.
The first one is fun:
[ 1.576226] windfarm: initializing for dual-core desktop G5 [ 1.577182] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.577190] ------------[ cut here ]------------ [ 1.577192] Badness at kernel/lockdep.c:2706 [ 1.577196] NIP: c0000000000b6a68 LR: c0000000000b6a4c CTR: c0000000003afedc [ 1.577200] REGS: c000000216197620 TRAP: 0700 Not tainted (2.6.33-rc8-wl-64022-gcdee415-dirty) [ 1.577203] MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 28000082 XER: 200fffff [ 1.577214] TASK = c000000216198000[1] 'swapper' THREAD: c000000216194000 CPU: 2 [ 1.577217] GPR00: 0000000000000000 c0000002161978a0 c000000000b10328 0000000000000001 [ 1.577223] GPR04: 0000000000000001 c000000000071638 0000000000000000 0000000000000002 [ 1.577229] GPR08: 0000000000000000 c0000000014320f0 0000000000000001 c000000000b27638 [ 1.577235] GPR12: 0000000000000041 c000000000b21880 0000000000000056 0000000001400000 [ 1.577241] GPR16: 0000000000240ee0 c000000000718923 c0000000007ff6ec 000000000000005e [ 1.577247] GPR20: 00000000ffb30f40 c0000000007188b9 0000000000000000 0000000000240ed0 [ 1.577253] GPR24: 0000000000000108 0000000000000000 fffffffffffffff4 c00000021488b000 [ 1.577259] GPR28: 6b6b6b6b6b6b6b6b c00000021488bcc8 c000000000a77780 c0000002161978a0 [ 1.577271] NIP [c0000000000b6a68] .lockdep_init_map+0x148/0x66c [ 1.577276] LR [c0000000000b6a4c] .lockdep_init_map+0x12c/0x66c [ 1.577278] Call Trace: [ 1.577282] [c0000002161978a0] [c0000000000b6a34] .lockdep_init_map+0x114/0x66c (unreliable) [ 1.577289] [c0000002161979a0] [c0000000001efd88] .sysfs_add_file_mode+0x90/0x124 [ 1.577294] [c000000216197a60] [c0000000001efe58] .sysfs_add_file+0x3c/0x50
Quoted 8 lines
[ 1.577299] [c000000216197b00] [c0000000001effb4] .sysfs_create_file+0x5c/0x74 [ 1.577305] [c000000216197ba0] [c0000000004292b0] .device_create_file+0x40/0x5c [ 1.577311] [c000000216197c40] [c000000000441178] .wf_register_control+0x108/0x178 [ 1.577316] [c000000216197cf0] [c0000000004440a4] .smu_fan_create+0x548/0x598 [ 1.577323] [c000000216197da0] [c0000000007e5e6c] .smu_controls_init+0xb0/0x1f4 [ 1.577329] [c000000216197e40] [c0000000000084e4] .do_one_initcall+0xac/0x204 [ 1.577335] [c000000216197ef0] [c0000000007b84b8] .kernel_init+0x1f0/0x270 [ 1.577340] [c000000216197f90] [c000000000028f8c] .kernel_thread+0x54/0x70
This should be fixed by the following patch, it is based on the 4 patches from Eric.
Thanks.
---
drivers/macintosh/windfarm_smu_controls.c +1 -0
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node, fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit
drivers/macintosh/windfarm_smu_controls.c static struct smu_fan_control · line 177
Quoted 8 lines · Américo Wang
drivers/macintosh/windfarm_smu_controls.c +1
-0@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node, fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr);
hmm.
drivers/macintosh/windfarm_smu_controls.c: In function ‘smu_fan_create’:drivers/macintosh/windfarm_smu_controls.c:176: error: ‘struct device_attribute’ has no member named ‘key’
johannes
drivers/macintosh/windfarm_smu_controls.c static struct smu_fan_control *smu_fan_create(struct device_node *node, · line 176
Quoted 3 lines · Américo Wang
drivers/macintosh/windfarm_smu_controls.c +1
-0fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr);
ah, needs to be "ctrl.attr.attr".
johannes
Quoted 8 lines · Johannes Berg
Review
Quoted 3 lines · Américo Wang
(quoted diff) +1
-0fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN; + sysfs_attr_init(&fct->ctrl.attr);ah, needs to be "ctrl.attr.attr".
Ouch, right... Updated.
Thank you!
---
drivers/macintosh/windfarm_smu_controls.c +1 -0
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node, fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit
Quoted 5 lines · Américo Wang
Quoted 4 lines · Johannes Berg
Review
Quoted 2 lines · Américo Wang
(quoted diff) +0
-0fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN :
Quoted 7 lines
WF_CONTROL_RPM_FAN;Quoted 4 lines
Review
Quoted 1 line
(quoted diff) +1
-0+ sysfs_attr_init(&fct->ctrl.attr);ah, needs to be "ctrl.attr.attr".
Ouch, right... Updated.
I have this now, and that removed all the warnings:
--- drivers/macintosh/windfarm_core.c | 1 + drivers/macintosh/windfarm_smu_controls.c | 1 + kernel/module.c | 3 +++ 3 files changed, 5 insertions(+)
drivers/macintosh/windfarm_smu_controls.c +1 -0
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_c fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit
drivers/macintosh/windfarm_core.c +1 -0
@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensorkref_init (&new_sr->ref);list_add (&new_sr->link, &wf_sensors); +sysfs_attr_init (&new_sr->attr.attr); new_sr->attr.attr.name = new_sr->name; new_sr->attr.attr.mode =0444 ; new_sr->attr.show = wf_show_sensor;
kernel/module.c +3 -0
@@ -1085,6 +1085,7 @@ static void add_sect_attrs(struct module sect_attrs->nsections++; sattr->mattr.show = module_sect_show; sattr->mattr.store =NULL ; +sysfs_attr_init (&sattr->mattr.attr); sattr->mattr.attr.name = sattr->name; sattr->mattr.attr.mode =S_IRUGO ; *(gattr++) = &(sattr++)->mattr.attr;
@@ -1178,6 +1179,7 @@ static void add_notes_attrs(struct modulif (sect_empty (&sechdrs[i]))continue ;if (sechdrs[i].sh_type ==SHT_NOTE ) { +sysfs_bin_attr_init (nattr); nattr->attr.name = mod->sect_attrs->attrs[loaded].name; nattr->attr.mode =S_IRUGO ; nattr->size = sechdrs[i].sh_size;
@@ -1250,6 +1252,7 @@ int module_add_modinfo_attrs(struct moduif (!attr->test || (attr->test && attr->test (mod))) {memcpy (temp_attr, attr,sizeof (*temp_attr)); +sysfs_attr_init (&temp_attr->attr); error =sysfs_create_file (&mod->mkobj.kobj,&temp_attr->attr); ++temp_attr; }
johannes
Quoted 1 line · Johannes Berg
I have this now, and that removed all the warnings:
But I still don't get anything back wrt. the original problem ... still hangs after printing "disabling non-boot CPUs"
:(
johannes
Quoted 7 lines · Johannes Berg
Quoted 1 line · Johannes Berg
I have this now, and that removed all the warnings:
But I still don't get anything back wrt. the original problem ... still hangs after printing "disabling non-boot CPUs"
Odd, it seems we still have some problem... maybe my quick patch is broken, I will check it tomorrow, it's mid-night here. :)
Thanks.
Quoted 5 lines · Américo Wang
Quoted 4 lines · Johannes Berg
Quoted 1 line · Johannes Berg
I have this now, and that removed all the warnings:
Quoted 7 lines
Quoted 1 line
But I still don't get anything back wrt. the original problem ...
still
Quoted 2 lines
hangs after printing "disabling non-boot CPUs"
Odd, it seems we still have some problem... maybe my quick patch is broken, I will check it tomorrow, it's mid-night here. :)
Oi! Thanks for all your help so far.
johannes
Quoted 7 lines · Johannes Berg
Quoted 6 lines · Américo Wang
Quoted 4 lines · Johannes Berg
Review
Quoted 2 lines · Américo Wang
(quoted diff) +0
-0fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN :
WF_CONTROL_RPM_FAN;
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
Review
Quoted 1 line
(quoted diff) +1
-0+ sysfs_attr_init(&fct->ctrl.attr);ah, needs to be "ctrl.attr.attr".
Ouch, right... Updated.
I have this now, and that removed all the warnings:
Excellent!
You can send this as a normal patch to Erich and Greg, with me Cc'ed. :)
Thanks much!
Quoted 56 lines
---
drivers/macintosh/windfarm_core.c | 1 + drivers/macintosh/windfarm_smu_controls.c | 1 + kernel/module.c | 3 +++ 3 files changed, 5 insertions(+)drivers/macintosh/windfarm_smu_controls.c +1
-0@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_c fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit drivers/macintosh/windfarm_core.c +1
-0@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensorkref_init (&new_sr->ref);list_add (&new_sr->link, &wf_sensors); +sysfs_attr_init (&new_sr->attr.attr); new_sr->attr.attr.name = new_sr->name; new_sr->attr.attr.mode =0444 ; new_sr->attr.show = wf_show_sensor;kernel/module.c +3
-0@@ -1085,6 +1085,7 @@ static void add_sect_attrs(struct module sect_attrs->nsections++; sattr->mattr.show = module_sect_show; sattr->mattr.store =NULL ; +sysfs_attr_init (&sattr->mattr.attr); sattr->mattr.attr.name = sattr->name; sattr->mattr.attr.mode =S_IRUGO ; *(gattr++) = &(sattr++)->mattr.attr;@@ -1178,6 +1179,7 @@ static void add_notes_attrs(struct modulif (sect_empty (&sechdrs[i]))continue ;if (sechdrs[i].sh_type ==SHT_NOTE ) { +sysfs_bin_attr_init (nattr); nattr->attr.name = mod->sect_attrs->attrs[loaded].name; nattr->attr.mode =S_IRUGO ; nattr->size = sechdrs[i].sh_size;@@ -1250,6 +1252,7 @@ int module_add_modinfo_attrs(struct moduif (!attr->test || (attr->test && attr->test (mod))) {memcpy (temp_attr, attr,sizeof (*temp_attr)); +sysfs_attr_init (&temp_attr->attr); error =sysfs_create_file (&mod->mkobj.kobj,&temp_attr->attr); ++temp_attr; }johannes
Signature · 1 line
Live like a child, think like the god.
PATCH 1/1 module: init sysfs attributes
This is required for lockdep.
--- kernel/module.c | 3 +++
kernel/module.c +3 -0
@@ -1085,6 +1085,7 @@ static void add_sect_attrs(struct module sect_attrs->nsections++; sattr->mattr.show = module_sect_show; sattr->mattr.store =NULL ; +sysfs_attr_init (&sattr->mattr.attr); sattr->mattr.attr.name = sattr->name; sattr->mattr.attr.mode =S_IRUGO ; *(gattr++) = &(sattr++)->mattr.attr;
@@ -1178,6 +1179,7 @@ static void add_notes_attrs(struct modulif (sect_empty (&sechdrs[i]))continue ;if (sechdrs[i].sh_type ==SHT_NOTE ) { +sysfs_bin_attr_init (nattr); nattr->attr.name = mod->sect_attrs->attrs[loaded].name; nattr->attr.mode =S_IRUGO ; nattr->size = sechdrs[i].sh_size;
@@ -1250,6 +1252,7 @@ int module_add_modinfo_attrs(struct moduif (!attr->test || (attr->test && attr->test (mod))) {memcpy (temp_attr, attr,sizeof (*temp_attr)); +sysfs_attr_init (&temp_attr->attr); error =sysfs_create_file (&mod->mkobj.kobj,&temp_attr->attr); ++temp_attr; }
PATCH 1/1 windfarm: init sysfs attributes
In reply to Américo WangThis is required for lockdep.
--- drivers/macintosh/windfarm_core.c | 1 + drivers/macintosh/windfarm_smu_controls.c | 1 +
drivers/macintosh/windfarm_smu_controls.c +1 -0
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_c fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit
drivers/macintosh/windfarm_core.c +1 -0
@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensorkref_init (&new_sr->ref);list_add (&new_sr->link, &wf_sensors); +sysfs_attr_init (&new_sr->attr.attr); new_sr->attr.attr.name = new_sr->name; new_sr->attr.attr.mode =0444 ; new_sr->attr.show = wf_show_sensor;
Re: [PATCH] windfarm: init sysfs attributes
Quoted 1 line · Johannes Berg
This is required for lockdep.
Please CC [email protected] or it doesn't get caught by patchwork.
I'll fwd that one myself.
Cheers,
Ben.
Quoted 26 lines
Signed-off-by Johannes Berg <[email protected]>--- drivers/macintosh/windfarm_core.c | 1 + drivers/macintosh/windfarm_smu_controls.c | 1 +drivers/macintosh/windfarm_smu_controls.c +1
-0@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_c fct->fan_type = pwm_fan; fct->ctrl.type = pwm_fan ?WF_CONTROL_PWM_FAN :WF_CONTROL_RPM_FAN ; +sysfs_attr_init (&fct->ctrl.attr.attr);/* We use the name & location here the same way we do for SMU sensors, * see the comment in windfarm_smu_sensors.c. The locations are a bit drivers/macintosh/windfarm_core.c +1
-0@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensorkref_init (&new_sr->ref);list_add (&new_sr->link, &wf_sensors); +sysfs_attr_init (&new_sr->attr.attr); new_sr->attr.attr.name = new_sr->name; new_sr->attr.attr.mode =0444 ; new_sr->attr.show = wf_show_sensor;
Re: [PATCH] windfarm: init sysfs attributes
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 1 line · Johannes Berg
This is required for lockdep.
Please CC [email protected] or it doesn't get caught by patchwork.
Eh, sure, but I think it needs to be part of Eric's series?
Quoted 1 line
I'll fwd that one myself.
Thanks.
johannes
Re: [PATCH] windfarm: init sysfs attributes
Quoted 9 lines · Johannes Berg
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 1 line · Johannes Berg
This is required for lockdep.
Please CC [email protected] or it doesn't get caught by patchwork.
Eh, sure, but I think it needs to be part of Eric's series?
Yeah, that's why we are Cc'ing Greg, since he took Eric's patches already.
Greg?
Re: [PATCH] windfarm: init sysfs attributes
Btw, request_firmware also needs annotation.
johannes
Re: [PATCH] windfarm: init sysfs attributes
Quoted 2 lines · Johannes Berg
Btw,
request_firmwarealso needs annotation.
Oh, mind to send a patch for it? ;)
Re: [PATCH] windfarm: init sysfs attributes
Quoted 1 line · Américo Wang
Oh, mind to send a patch for it? ;)
I was going to, but can't now ... just returned from ski trip yesterday and will be travelling again in less than 24 hours.
johannes
Re: [PATCH] windfarm: init sysfs attributes
In reply to Américo WangQuoted 9 lines · Am??rico Wang
Quoted 7 lines · Johannes Berg
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 1 line · Johannes Berg
This is required for lockdep.
Please CC [email protected] or it doesn't get caught by patchwork.
Quoted 6 lines
Quoted 2 lines
Eh, sure, but I think it needs to be part of Eric's series?
Yeah, that's why we are Cc'ing Greg, since he took Eric's patches already.
Greg?
I didn't take all of them yet, that will happen later today, and I'll also queue this up, as it is then required.
thanks,
greg k-h
Re: [PATCH] windfarm: init sysfs attributes
Quoted 13 lines · Greg KH
Quoted 12 lines · Am??rico Wang
Quoted 9 lines · Johannes Berg
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 1 line · Johannes Berg
This is required for lockdep.
Please CC [email protected] or it doesn't get caught by patchwork.
Eh, sure, but I think it needs to be part of Eric's series?
Quoted 6 lines
Quoted 3 lines
Yeah, that's why we are Cc'ing Greg, since he took Eric's patches already.
Greg?
I didn't take all of them yet, that will happen later today, and I'll also queue this up, as it is then required.
Thanks, also this one:
Quoted 2 lines · Américo Wang
This should be fixed by the following patch, it is based on the 4 patches from Eric.
Thanks, one down.
[ 1.556276] windfarm: initializing for dual-core desktop G5 [ 1.822554] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.827044] ------------[ cut here ]------------ [ 1.831498] Badness at kernel/lockdep.c:2706 [ 1.836013] NIP: c0000000000b6a3c LR: c0000000000b6a20 CTR: 0000000000000000 [ 1.840721] REGS: c0000002161976a0 TRAP: 0700 Not tainted (2.6.33-rc8-00140-g4ec62b2-dirty) [ 1.845620] MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 24000022 XER: 000fffff [ 1.850679] TASK = c000000216198000[1] 'swapper' THREAD: c000000216194000 CPU: 1 [ 1.850884] GPR00: 0000000000000000 c000000216197920 c000000000b10328 0000000000000001 [ 1.856050] GPR04: 0000000000000001 c000000000070d0c 0000000000000000 0000000000000002 [ 1.861327] GPR08: 0000000000000000 c0000000014320f0 0000000000000001 c000000000b27638 [ 1.866640] GPR12: 0000000024000044 c000000000b21680 0000000000000056 0000000001400000 [ 1.871978] GPR16: 0000000000240ee0 c000000000718923 c0000000007ff6ec 000000000000005e [ 1.877351] GPR20: c0000000007e6118 c000000002b74a58 c000000216194080 c000000002b74a70 [ 1.882770] GPR24: 0000000000000000 0000000000000000 fffffffffffffff4 c00000021643ee40 [ 1.888249] GPR28: 6b6b6b6b6b6b6b6b c00000021644b188 c000000000a77780 c000000216197920 [ 1.899228] NIP [c0000000000b6a3c] .lockdep_init_map+0x148/0x66c [ 1.904944] LR [c0000000000b6a20] .lockdep_init_map+0x12c/0x66c [ 1.910740] Call Trace: [ 1.916549] [c000000216197920] [c0000000000b6a08] .lockdep_init_map+0x114/0x66c (unreliable) [ 1.922686] [c000000216197a20] [c0000000001efd58] .sysfs_add_file_mode+0x90/0x124 [ 1.928883] [c000000216197ae0] [c0000000001efe28] .sysfs_add_file+0x3c/0x50 [ 1.935088] [c000000216197b80] [c0000000001eff84] .sysfs_create_file+0x5c/0x74 [ 1.941348] [c000000216197c20] [c000000000429284] .device_create_file+0x40/0x5c [ 1.941356] [c000000216197cc0] [c000000000440fec] .wf_register_sensor+0x108/0x178 [ 1.941363] [c000000216197d70] [c0000000007e6368] .smu_sensors_init+0x3b8/0x690 [ 1.941369] [c000000216197e40] [c0000000000084e4] .do_one_initcall+0xac/0x204 [ 1.941374] [c000000216197ef0] [c0000000007b84b8] .kernel_init+0x1f0/0x270 [ 1.941380] [c000000216197f90] [c000000000028f8c] .kernel_thread+0x54/0x70 [ 1.941383] Instruction dump: [ 1.941385] e93e81c8 80090000 2f800000 409e04f4 482fa5e5 60000000 2fa30000 419e04e4 [ 1.941395] e93e81d0 80090000 2f800000 409e04d4 <0fe00000> 480004cc fb9d0000 e93e8018
I think I get the point ... I'll go through myself.
johannes
Quoted 41 lines · Johannes Berg
Quoted 2 lines · Américo Wang
This should be fixed by the following patch, it is based on the 4 patches from Eric.
Thanks, one down.
[ 1.556276] windfarm: initializing for dual-core desktop G5 [ 1.822554] BUG: key 6b6b6b6b6b6b6b6b not in .data! [ 1.827044] ------------[ cut here ]------------ [ 1.831498] Badness at kernel/lockdep.c:2706 [ 1.836013] NIP: c0000000000b6a3c LR: c0000000000b6a20 CTR: 0000000000000000 [ 1.840721] REGS: c0000002161976a0 TRAP: 0700 Not tainted (2.6.33-rc8-00140-g4ec62b2-dirty) [ 1.845620] MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 24000022 XER: 000fffff [ 1.850679] TASK = c000000216198000[1] 'swapper' THREAD: c000000216194000 CPU: 1 [ 1.850884] GPR00: 0000000000000000 c000000216197920 c000000000b10328 0000000000000001 [ 1.856050] GPR04: 0000000000000001 c000000000070d0c 0000000000000000 0000000000000002 [ 1.861327] GPR08: 0000000000000000 c0000000014320f0 0000000000000001 c000000000b27638 [ 1.866640] GPR12: 0000000024000044 c000000000b21680 0000000000000056 0000000001400000 [ 1.871978] GPR16: 0000000000240ee0 c000000000718923 c0000000007ff6ec 000000000000005e [ 1.877351] GPR20: c0000000007e6118 c000000002b74a58 c000000216194080 c000000002b74a70 [ 1.882770] GPR24: 0000000000000000 0000000000000000 fffffffffffffff4 c00000021643ee40 [ 1.888249] GPR28: 6b6b6b6b6b6b6b6b c00000021644b188 c000000000a77780 c000000216197920 [ 1.899228] NIP [c0000000000b6a3c] .lockdep_init_map+0x148/0x66c [ 1.904944] LR [c0000000000b6a20] .lockdep_init_map+0x12c/0x66c [ 1.910740] Call Trace: [ 1.916549] [c000000216197920] [c0000000000b6a08] .lockdep_init_map+0x114/0x66c (unreliable) [ 1.922686] [c000000216197a20] [c0000000001efd58] .sysfs_add_file_mode+0x90/0x124 [ 1.928883] [c000000216197ae0] [c0000000001efe28] .sysfs_add_file+0x3c/0x50 [ 1.935088] [c000000216197b80] [c0000000001eff84] .sysfs_create_file+0x5c/0x74 [ 1.941348] [c000000216197c20] [c000000000429284] .device_create_file+0x40/0x5c [ 1.941356] [c000000216197cc0] [c000000000440fec] .wf_register_sensor+0x108/0x178 [ 1.941363] [c000000216197d70] [c0000000007e6368] .smu_sensors_init+0x3b8/0x690 [ 1.941369] [c000000216197e40] [c0000000000084e4] .do_one_initcall+0xac/0x204 [ 1.941374] [c000000216197ef0] [c0000000007b84b8] .kernel_init+0x1f0/0x270 [ 1.941380] [c000000216197f90] [c000000000028f8c] .kernel_thread+0x54/0x70 [ 1.941383] Instruction dump: [ 1.941385] e93e81c8 80090000 2f800000 409e04f4 482fa5e5 60000000 2fa30000 419e04e4 [ 1.941395] e93e81d0 80090000 2f800000 409e04d4 <0fe00000> 480004cc fb9d0000 e93e8018
Quoted 2 lines
I think I get the point ... I'll go through myself.
Thank you!
For this case, you could add sysfs_attr_init() in wf_register_sensor().