Skip to contentSkip to conversation

Patches for OpenObex

PATCH In review Bastien Nocera 1 participant 2 messages Feb 19, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Patches for OpenObex

Heya,

2 small patches for openobex.

The first patch fixes libusb1 compilation on my machine.

For the second patch, when libusb1 is used, we can set self->fd to be a monitoring file descriptor for incoming data.

With that patch, I could make osso-gwobex work with USB connections.

There's still some bugs to take care of, but I believe this patch to be correct. Are there any places in openobex where the self->fd will be directly when connected via USB? If so, those would need to be fixed as well.

Cheers

Quoted 1 line

From 80ac78ca813d057b2c506f936e1b8b8d3c939357 Mon Sep 17 00:00:00 2001

From: Bastien Nocera <[email protected]>
Date: Fri, 19 Feb 2010 12:03:01 +0000
Subject: [PATCH 1/2] Fix libusb1 detection

There's no need to check for the presence of a .pc file in /usr/lib/, pkg-config will already do that for you, and it would fail on machines where /usr/lib64 is used, or when libusb1 is installed in another prefix.

---
 acinclude.m4 |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)
acinclude.m4 +0 -1
index 81fa9da..d813b71 100644
@@ -191,7 +191,6 @@ AC_DEFUN([AC_PATH_USB], [
 AC_DEFUN([AC_PATH_USB1], [
 	usb1_lib_found=no
 	PKG_CHECK_MODULES(USB1, libusb-1.0, usb1_lib_found=yes, usb1_lib_found=no)
-	AC_CHECK_FILE(${prefix}/lib/pkgconfig/libusb-1.0.pc, REQUIRES="libusb1")
 	AC_SUBST(USB1_CFLAGS)
 	AC_SUBST(USB1_LIBS)
 
Signature · 1 line
1.6.6.1
Quoted 1 line

From 55979f925051f794337a59a8e76727d03a215c62 Mon Sep 17 00:00:00 2001

From: Bastien Nocera <[email protected]>
Date: Fri, 19 Feb 2010 12:04:43 +0000
Subject: [PATCH 2/2] Export the libusb1 read file descriptor

When using libusb1, we can export the file descriptor that corresponds to reading from the device, so it can be used to setup polling sources, and timeout based operations.

This would be used by osso-gwobex to monitor incoming data, for USB support.

---
 lib/usb1obex.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
lib/usb1obex.c +31 -0
index dfa1685..6a80fbb 100644
@@ -30,6 +30,7 @@
 #include <stdio.h>		/* perror */
 #include <errno.h>		/* errno and EADDRNOTAVAIL */
 #include <stdlib.h>
+#include <poll.h>		/* POLLOUT */
 
 #include <libusb.h>
 
@@ -339,6 +340,35 @@ void usbobex_free_interfaces(int num, obex_interface_t *intf)
 }
 
 /*
+ * Function usbobex_get_fd ()
+ *
+ *    Get the "poll out" file descriptor for the USB device,
+ *    used to check for events in an async way
+ *
+ */
+static int usbobex_get_fd(void)
+{
+	const struct libusb_pollfd **usbfds;
+	const struct libusb_pollfd *usbfd;
+	int i = 0;
+
+	DEBUG(4, "Getting the USB file descriptor");
+
+	usbfds = libusb_get_pollfds(libusb_ctx);
+	if (usbfds == NULL) {
+		DEBUG(4, "Could not get USB file descriptors");
+		return INVALID_SOCKET;
+	}
+
+	while ((usbfd = usbfds[i++]) != NULL) {
+		if (usbfd->events & POLLOUT)
+			return usbfd->fd;
+	}
+
+	return INVALID_SOCKET;
+}
+
+/*
  * Function usbobex_connect_request (self)
  *
  *    Open the USB connection
@@ -379,6 +409,7 @@ int usbobex_connect_request(obex_t *self)
 	}
 
 	self->trans.mtu = OBEX_MAXIMUM_MTU;
+	self->fd = usbobex_get_fd();
 	DEBUG(2, "transport mtu=%d\n", self->trans.mtu);
 	return 1;
 
Signature · 1 line
1.6.6.1
#1 lore raw
Quoted 9 lines · Bastien Nocera

Heya,

2 small patches for openobex.

The first patch fixes libusb1 compilation on my machine.

For the second patch, when libusb1 is used, we can set self->fd to be a monitoring file descriptor for incoming data.

Quoted 6 lines

With that patch, I could make osso-gwobex work with USB connections.

There's still some bugs to take care of, but I believe this patch to be correct. Are there any places in openobex where the self->fd will be directly when connected via USB? If so, those would need to be fixed as well.

Another patch to fix an invalid memory access when obex_transport_read() has to resize its buffer.

Quoted 1 line

From a3e0a7c2ed10ffab279ad3cab0c3139e651e35b7 Mon Sep 17 00:00:00 2001

From: Bastien Nocera <[email protected]>
Date: Fri, 19 Feb 2010 13:40:27 +0000
Subject: [PATCH] Fix invalid memory access

The hdr pointer will not be valid any more if the transport read() does a realloc, so cache the opcode that we'll use later in the code.

Fixes the following valgrind error:
==31644== Thread 2:
==31644== Invalid read of size 1

==31644==    at 0x4E3D787: obex_data_indication (obex_main.c:307)
==31644==    by 0x4E3F403: obex_transport_handle_input (obex_transport.c:72)
==31644==    by 0x4E3C67E: OBEX_HandleInput (obex.c:449)
==31644==    by 0x4C335BD: gw_obex_request_sync (obex-priv.c:108)
==31644==    by 0x4C34114: gw_obex_get (obex-priv.c:939)
==31644==    by 0x4C319EE: gw_obex_read_dir (gw-obex.c:198)
==31644==    by 0x408222: _retrieve_folder_listing (gvfsbackendobexftp.c:552)
==31644==    by 0x408DD1: do_enumerate (gvfsbackendobexftp.c:1549)
==31644==    by 0x411491: g_vfs_job_run (gvfsjob.c:198)
==31644==    by 0x3C758658CA: ??? (in /lib64/libglib-2.0.so.0.2303.0)
==31644==    by 0x3C75863A03: ??? (in /lib64/libglib-2.0.so.0.2303.0)
==31644==    by 0x3C74806CA9: start_thread (in /lib64/libpthread-2.11.90.so)
==31644==  Address 0x5313f50 is 0 bytes inside a block of size 71,679 free'd
==31644==    at 0x4A05255: realloc (vg_replace_malloc.c:476)
==31644==    by 0x4E41D12: buf_resize (databuffer.c:147)
==31644==    by 0x4E42063: buf_reserve_end (databuffer.c:217)
==31644==    by 0x4E3FE90: obex_transport_read (obex_transport.c:519)
==31644==    by 0x4E3D711: obex_data_indication (obex_main.c:268)
==31644==    by 0x4E3F403: obex_transport_handle_input (obex_transport.c:72)
==31644==    by 0x4E3C67E: OBEX_HandleInput (obex.c:449)
==31644==    by 0x4C335BD: gw_obex_request_sync (obex-priv.c:108)
==31644==    by 0x4C34114: gw_obex_get (obex-priv.c:939)
==31644==    by 0x4C319EE: gw_obex_read_dir (gw-obex.c:198)
==31644==    by 0x408222: _retrieve_folder_listing (gvfsbackendobexftp.c:552)
==31644==    by 0x408DD1: do_enumerate (gvfsbackendobexftp.c:1549)
==31644==
---
 lib/obex_main.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
lib/obex_main.c +5 -1
index 9fb65d7..435f1a9 100644
@@ -234,6 +234,7 @@ int obex_data_indication(obex_t *self, uint8_t *buf, int buflen)
 	int actual = 0;
 	unsigned int size;
 	int ret;
+	int opcode;
 	
 	DEBUG(4, "\n");
 
@@ -262,6 +263,9 @@ int obex_data_indication(obex_t *self, uint8_t *buf, int buflen)
 		hdr = (obex_common_hdr_t *) msg->data;
 		size = ntohs(hdr->len);
 
+		/* As hdr might not be valid anymore if the _read() does a realloc */
+		opcode = hdr->opcode;
+
 		actual = 0;
 		if(msg->data_size < (int) ntohs(hdr->len)) {
 
@@ -304,7 +308,7 @@ int obex_data_indication(obex_t *self, uint8_t *buf, int buflen)
 	DUMPBUFFER(2, "Rx", msg);
 
 	actual = msg->data_size;
-	final = hdr->opcode & OBEX_FINAL; /* Extract final bit */
+	final = opcode & OBEX_FINAL; /* Extract final bit */
 
 	/* Dispatch to the mode we are in */
 	if(self->state & MODE_SRV) {
Signature · 1 line
1.6.6.1