Skip to contentSkip to conversation

ARM: pxa/raumfeld: set GPIO drive bits for LED pins

PATCH New Daniel Mack 1 participant 1 message Feb 24, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: pxa/raumfeld: set GPIO drive bits for LED pins

Set GPIO bits to pull the pins connected to LEDs for lower power mode. We want all LEDs off when devices are in suspend.

---
 arch/arm/mach-pxa/raumfeld.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/raumfeld.c +8 -0
index 06717d7..3184bdc 100644
@@ -231,6 +231,10 @@ static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
 	GPIO26_SSP2_FRM,
 	GPIO27_SSP2_TXD,
 	GPIO29_SSP2_EXTCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
@@ -277,6 +281,10 @@ static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
 	GPIO87_SSP1_TXD,
 	GPIO88_SSP1_RXD,
 	GPIO90_SSP1_SYSCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 /*
Signature · 1 line
1.6.6.2