Skip to contentSkip to conversation

Enable CAN peripheral support on AM3517

PATCH In review Sriramakrishnan 2 participants 5 messages Feb 26, 2010 – May 4, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover Enable CAN peripheral support on AM3517

AM3517 platform includes the ti-hecc CAN peripheral. This patch series enables support for the ti-hecc peripheral on AM3517 platform. This patch series has been validated on AM3517EVM.

This patch is generated against tip of linux-omap.

Sriramakrishnan (2):
can:ti_hecc: board specific hookup on AM3517EVM
can:ti_hecc: Enable CAN support on AM3517.

 arch/arm/configs/am3517_evm_defconfig     |   22 +++++++++++++---
 arch/arm/mach-omap2/board-am3517evm.c     |   38 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/include/mach/am35xx.h |    9 +++++++
 3 files changed, 65 insertions(+), 4 deletions(-)
#1 lore raw

PATCH v2 1/2 can:ti_hecc: board specific hookup on AM3517EVM

Add board specific hookup for TI HECC driver on
AM3517 EVM

---
Addressed review comments about formatting and patch ordering.

 arch/arm/mach-omap2/board-am3517evm.c     |   38 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/include/mach/am35xx.h |    9 +++++++
 2 files changed, 47 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board-am3517evm.c +38 -0
index e6b8967..ddcfa07 100644
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
 
 #include <mach/hardware.h>
 #include <mach/am35xx.h>
@@ -292,6 +293,42 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	am3517_evm_i2c_init();
@@ -302,6 +339,7 @@ static void __init am3517_evm_init(void)
 
 	omap_serial_init();
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
 
arch/arm/mach-omap2/include/mach/am35xx.h +9 -0
index a705f94..0636263 100644
@@ -23,4 +23,13 @@
 #define AM35XX_IPSS_HECC_BASE		0x5C050000
 #define AM35XX_IPSS_VPFE_BASE		0x5C060000
 
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
+#define AM35XX_HECC_RAM_OFFSET		(0x3000)
+#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
+#define AM35XX_HECC_INT_LINE		(0x0)
+#define AM35XX_HECC_VERSION		(0x1)
+
 #endif /*  __ASM_ARCH_AM35XX_H */
Signature · 1 line
1.6.2.4
#2 lore raw

PATCH v2 2/2 can:ti_hecc: Enable CAN support on AM3517.

Modify the default kernel configuration on AM3517 to enable CAN.

---
 arch/arm/configs/am3517_evm_defconfig |   22 ++++++++++++++++++----
 1 files changed, 18 insertions(+), 4 deletions(-)
arch/arm/configs/am3517_evm_defconfig +18 -4
index abe9966..d5e15ba 100644
@@ -422,15 +422,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
Signature · 1 line
1.6.2.4
maintainer
#3 lore raw

PATCH v2 2/2 can:ti_hecc: Enable CAN support on AM3517.

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: for-next

Initial commit ID (Likely to change): 7241145120e803b600fc5aa1ef911c80ab68d1d5

PatchWorks
http://patchwork.kernel.org/patch/82312/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=7241145120e803b600fc5aa1ef911c80ab68d1d5

#4 lore raw
In reply to Sriramakrishnan
Quoted 19 lines

-----Original Message-----
From: Govindarajan, Sriramakrishnan
Sent: Friday, February 26, 2010 5:37 PM
To: [email protected]
Cc: Gole, Anant; Govindarajan, Sriramakrishnan
Subject: [PATCH v2 0/2] Enable CAN peripheral support on AM3517

AM3517 platform includes the ti-hecc CAN peripheral. This patch series enables support for the ti-hecc peripheral on AM3517 platform. This patch series has been validated on AM3517EVM.

This patch is generated against tip of linux-omap.

Sriramakrishnan (2):
can:ti_hecc: board specific hookup on AM3517EVM
can:ti_hecc: Enable CAN support on AM3517.

Quoted 5 lines
 arch/arm/configs/am3517_evm_defconfig     |   22 +++++++++++++---
 arch/arm/mach-omap2/board-am3517evm.c     |   38
+++++++++++++++++++++++++++++
 arch/arm/mach-omap2/include/mach/am35xx.h |    9 +++++++
 3 files changed, 65 insertions(+), 4 deletions(-)

[Sriram] Tony,
Any comments on this patch
Thanks,
Sriram