Skip to contentSkip to conversation

powerpc: Simplify update_vsyscall

PATCH New John Stultz 1 participant 2 messages Mar 5, 2010 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 powerpc: Simplify update_vsyscall

Currently powerpc's update_vsyscall calls an inline update_gtod. However, both are straightforward, and there are no other users, so this patch merges update_gtod into update_vsyscall.

Compiles, but otherwise untested.

Cc Anton Blanchard <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/powerpc/kernel/time.c |   55 ++++++++++++++++++++------------------------
 1 files changed, 25 insertions(+), 30 deletions(-)
arch/powerpc/kernel/time.c +25 -30
index 1b16b9a..9a06ff9 100644
@@ -423,30 +423,6 @@ void udelay(unsigned long usecs)
 }
 EXPORT_SYMBOL(udelay);
 
-static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
-			       u64 new_tb_to_xs)
-{
-	/*
-	 * tb_update_count is used to allow the userspace gettimeofday code
-	 * to assure itself that it sees a consistent view of the tb_to_xs and
-	 * stamp_xsec variables.  It reads the tb_update_count, then reads
-	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
-	 * the two values of tb_update_count match and are even then the
-	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
-	 * loops back and reads them again until this criteria is met.
-	 * We expect the caller to have done the first increment of
-	 * vdso_data->tb_update_count already.
-	 */
-	vdso_data->tb_orig_stamp = new_tb_stamp;
-	vdso_data->stamp_xsec = new_stamp_xsec;
-	vdso_data->tb_to_xs = new_tb_to_xs;
-	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
-	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
-	vdso_data->stamp_xtime = xtime;
-	smp_wmb();
-	++(vdso_data->tb_update_count);
-}
-
 #ifdef CONFIG_SMP
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -840,7 +816,7 @@ static cycle_t timebase_read(struct clocksource *cs)
 void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 		     u32 mult)
 {
-	u64 t2x, stamp_xsec;
+	u64 new_tb_to_xs, new_stamp_xsec;
 
 	if (clock != &clocksource_timebase)
 		return;
@@ -851,11 +827,30 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 
 	/* XXX this assumes clock->shift == 22 */
 	/* 4611686018 ~= 2^(20+64-22) / 1e9 */
-	t2x = (u64) mult * 4611686018ULL;
-	stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
-	do_div(stamp_xsec, 1000000000);
-	stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
-	update_gtod(clock->cycle_last, stamp_xsec, t2x);
+	new_tb_to_xs = (u64) mult * 4611686018ULL;
+	new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
+	do_div(new_stamp_xsec, 1000000000);
+	new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+
+	/*
+	 * tb_update_count is used to allow the userspace gettimeofday code
+	 * to assure itself that it sees a consistent view of the tb_to_xs and
+	 * stamp_xsec variables.  It reads the tb_update_count, then reads
+	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
+	 * the two values of tb_update_count match and are even then the
+	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
+	 * loops back and reads them again until this criteria is met.
+	 * We expect the caller to have done the first increment of
+	 * vdso_data->tb_update_count already.
+	 */
+	vdso_data->tb_orig_stamp = clock->cycle_last;
+	vdso_data->stamp_xsec = new_stamp_xsec;
+	vdso_data->tb_to_xs = new_tb_to_xs;
+	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
+	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+	vdso_data->stamp_xtime = xtime;
+	smp_wmb();
+	++(vdso_data->tb_update_count);
 }
 
 void update_vsyscall_tz(void)
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 2/2 powerpc: Cleanup xtime usage

This removes powerpc's direct xtime usage, allowing for further generic timeekeping cleanups

Compiled but otherwise untested.

Cc Paul Mackerras <[email protected]>
Cc Anton Blanchard <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/powerpc/kernel/time.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/kernel/time.c +4 -4
index 9a06ff9..9487ff0 100644
@@ -828,9 +828,9 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	/* XXX this assumes clock->shift == 22 */
 	/* 4611686018 ~= 2^(20+64-22) / 1e9 */
 	new_tb_to_xs = (u64) mult * 4611686018ULL;
-	new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
+	new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
 	do_div(new_stamp_xsec, 1000000000);
-	new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+	new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
 
 	/*
 	 * tb_update_count is used to allow the userspace gettimeofday code
@@ -848,7 +848,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	vdso_data->tb_to_xs = new_tb_to_xs;
 	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
 	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
-	vdso_data->stamp_xtime = xtime;
+	vdso_data->stamp_xtime = *wall_time;
 	smp_wmb();
 	++(vdso_data->tb_update_count);
 }
@@ -1057,7 +1057,7 @@ void __init time_init(void)
 	vdso_data->tb_orig_stamp = tb_last_jiffy;
 	vdso_data->tb_update_count = 0;
 	vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
-	vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
+	vdso_data->stamp_xsec = (u64) get_seconds() * XSEC_PER_SEC;
 	vdso_data->tb_to_xs = tb_to_xs;
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
Signature · 1 line
1.6.0.4