Regression in i915 on 2.6.34-rc1
Subsystems (5)
Dear Dave and others:
I seem to hit a sudden regression in 2.6.34-rc1: the modeset fails. On this box it also means, no way to start X, which is unfortunate.
Here's a quote from bad dmesg (truncated front and back for brievity):
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
................
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 33 for MSI/MSI-X
[drm] set up 127M of stolen space
[drm:i915_gem_init_ringbuffer] *ERROR* Ring head not reset to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring head forced to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring initialization failed ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5
dracut: Starting plymouth daemon
Here's old one from 2.6.33:
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Ironlake/D Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
..........
ACPI: Power Button [PWRF]
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] set up 127M of stolen space
Console: switching to colour frame buffer device 210x65
fb0: inteldrmfb frame buffer device
registered panic notifier
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:1d: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
So... No idea what went bad, so far, sorry. I'll try to bisect or otherwise find out. Just letting you know.
-- Pete
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
--
On Thu, 11 Mar 2010 00:33:58 -0700, Pete Zaitcev <[email protected]> wrote:
I apologise for answering to myself, but while there was no answer, git bisect found the offending commit and I verified that it was the culprit. Also, I am adding Bjorn and Jesse to cc:.
Quoted 42 lines
I seem to hit a sudden regression in 2.6.34-rc1: the modeset fails. On this box it also means, no way to start X, which is unfortunate.
Here's a quote from bad dmesg (truncated front and back for brievity):
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000tpm_tis00:09: 1.2 TPM (device-id0xB, rev-id 16)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
................
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
allocirq_descfor 33 on node -1
allockstat_irqson node -1
i915 0000:00:02.0: irq 33 for MSI/MSI-X
[drm] set up 127M of stolen space
[drm:i915_gem_init_ringbuffer] *ERROR* Ring head not reset to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring head forced to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring initialization failed ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5
dracut: Starting plymouth daemonHere's old one from 2.6.33:
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Ironlake/D Chipset agpgart-intel 0000:00:00.0: detected 131068K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
..........
ACPI: Power Button [PWRF]
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] set up 127M of stolen space
Console: switching to colour frame buffer device 210x65
Quoted 8 lines
fb0: inteldrmfb frame buffer device
registered panic notifier
[Firmware Bug]: ACPI: ACPI brightness control misses_BQCfunction
acpi device:1d: registered ascooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
The commit follows appended.
It's possible that the BIOS on this motherboard is not up to snuff, but the 2.6.33-rc8 worked fine, so clearly Linux can do it... right?
Cheers,
-- Pete
commit 7bc5e3f2be32ae6fb0c74cd0f707f986b3a01a26
Author: Bjorn Helgaas <[email protected]> Date: Tue Feb 23 10:24:41 2010 -0700
x86/PCI: use host bridge _CRS info by default on 2008 and newer machines
The main benefit of using ACPI host bridge window information is that we can do better resource allocation in systems with multiple host bridges, e.g., http://bugzilla.kernel.org/show_bug.cgi?id=14183
Sometimes we need _CRS information even if we only have one host bridge, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/341681
Most of these systems are relatively new, so this patch turns on "pci=use_crs" only on machines with a BIOS date of 2008 or newer.
Documentation/kernel-parameters.txt +6 -2
@@ -1948,8 +1948,12 @@ and is between 256 and 4096 characters. It is defined in the file IRQ routing is enabled. noacpi [X86] Do not use ACPI for IRQ routing or for PCI scanning. - use_crs [X86] Use _CRS for PCI resource - allocation. + use_crs [X86] Use PCI host bridge window information + from ACPI. On BIOSes from 2008 or later, this + is enabled by default. If you need to use this, + please report a bug. + nocrs [X86] Ignore PCI host bridge windows from ACPI. + If you need to use this, please report a bug. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround
arch/ia64/include/asm/acpi.h +1 -0
@@ -98,6 +98,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)#endif #define acpi_processor_cstate_check (x) (x)/* no idle limits on IA64 :) */ static inline void disable_acpi (void ) { } +static inline void pci_acpi_crs_quirks (void ) { }const char *acpi_get_sysname (void );int acpi_request_vector (u32 int_type);
arch/x86/include/asm/pci_x86.h +1 -0
@@ -29,6 +29,7 @@#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000#define PCI_HAS_IO_ECS 0x40000#define PCI_NOASSIGN_ROMS 0x80000 +#define PCI_ROOT_NO_CRS 0x100000extern unsigned int pci_probe;extern unsigned long pirq_table_addr;
arch/x86/pci/acpi.c +47 -6
72 lines not on this page · raw message
arch/x86/pci/common.c +3 -0
@@ -520,6 +520,9 @@ char * __devinit pcibios_setup(char *str) }else if (!strcmp (str,"use_crs" )) { pci_probe |=PCI_USE__CRS ;return NULL ; + }else if (!strcmp (str,"nocrs" )) { + pci_probe |=PCI_ROOT_NO_CRS ; +return NULL ; }else if (!strcmp (str,"earlydump" )) { pci_early_dump_regs =1 ;return NULL ;
drivers/acpi/pci_root.c +1 -0
@@ -566,6 +566,7 @@ static int __init acpi_pci_root_init(void)if (acpi_pci_disabled)return 0 ; +pci_acpi_crs_quirks ();if (acpi_bus_register_driver (&acpi_pci_root_driver) <0 )return -ENODEV ;
include/acpi/acpi_drivers.h +1 -0
@@ -104,6 +104,7 @@ int acpi_pci_bind_root(struct acpi_device *device);struct pci_bus *pci_acpi_scan_root (struct acpi_device *device,int domain,int bus); +void pci_acpi_crs_quirks (void );/* -------------------------------------------------------------------------- Processor
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
--
Quoted 8 lines · Pete Zaitcev
On Thu, 11 Mar 2010 00:33:58 -0700, Pete Zaitcev <[email protected]> wrote:
I apologise for answering to myself, but while there was no answer, git bisect found the offending commit and I verified that it was the culprit. Also, I am adding Bjorn and Jesse to cc:.
Quoted 2 lines
I seem to hit a sudden regression in 2.6.34-rc1: the modeset fails. On this box it also means, no way to start X, which is unfortunate.
Thanks for the report. Would you mind posting the entire dmesg log, /proc/iomem contents, and "lspci -vv" output somewhere (maybe in bugzilla)?
The quote below isn't enough for me to see the problem, but
http://bugzilla.kernel.org/show_bug.cgi?id=15480 is another regression related to this commit. There are some patches for that one here:
http://lkml.org/lkml/2010/3/11/512, but without knowing more about the problem you're seeing, I don't want to waste your time trying them.
Bjorn
Quoted 24 lines
Quoted 24 lines
Here's a quote from bad dmesg (truncated front and back for brievity):
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000tpm_tis00:09: 1.2 TPM (device-id0xB, rev-id 16)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
................
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
allocirq_descfor 33 on node -1
allockstat_irqson node -1
i915 0000:00:02.0: irq 33 for MSI/MSI-X
[drm] set up 127M of stolen space
[drm:i915_gem_init_ringbuffer] *ERROR* Ring head not reset to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring head forced to zero ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_gem_init_ringbuffer] *ERROR* Ring initialization failed ctl ffffffff head ffffffff tail ffffffff start ffffffff [drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5
dracut: Starting plymouth daemon
...
Quoted 14 lines
The commit follows appended.
It's possible that the BIOS on this motherboard is not up to snuff, but the 2.6.33-rc8 worked fine, so clearly Linux can do it... right?
Cheers,
-- Petecommit
7bc5e3f2be32ae6fb0c74cd0f707f986b3a01a26Author: Bjorn Helgaas <[email protected]> Date: Tue Feb 23 10:24:41 2010 -0700x86/PCI: use host bridge
_CRSinfo by default on 2008 and newer machines
...
Quoted 9 lines · Bjorn Helgaas
Quoted 8 lines · Pete Zaitcev
On Thu, 11 Mar 2010 00:33:58 -0700, Pete Zaitcev <[email protected]> wrote:
I apologise for answering to myself, but while there was no answer, git bisect found the offending commit and I verified that it was the culprit. Also, I am adding Bjorn and Jesse to cc:.
Quoted 2 lines
I seem to hit a sudden regression in 2.6.34-rc1: the modeset fails. On this box it also means, no way to start X, which is unfortunate.
Oh, and I forgot to mention: booting with "pci=nocrs" should be a workaround while we figure out the problem.
Bjorn
Quoted 7 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?The quote below isn't enough for me to see the problem, but
http://bugzilla.kernel.org/show_bug.cgi?id=15480 is another regression related to this commit. []
Do you prefer me to attach the requested data to Yanko's bug, or file a new one for now?
-- Pete
Quoted 7 lines · Pete Zaitcev
Quoted 4 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?
Quoted 6 lines
Quoted 3 lines
The quote below isn't enough for me to see the problem, but
http://bugzilla.kernel.org/show_bug.cgi?id=15480 is another regression related to this commit. []Do you prefer me to attach the requested data to Yanko's bug, or file a new one for now?
Personally, I guess I'd file a new one, on the assumption that you're seeing a different problem.
Bjorn
Quoted 3 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?
Done, new bug:
http://bugzilla.kernel.org/show_bug.cgi?id=15533
-- Pete
Quoted 9 lines · Pete Zaitcev
Quoted 3 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?Done, new bug:
http://bugzilla.kernel.org/show_bug.cgi?id=15533
Thanks! Sorry, I should have asked for the "pci=nocrs" (working) dmesg, too. Do you have that handy? What kind of machine is this? I don't suppose you have Windows on it; I'd really like to know what the Device Manager says about the PCI host bridge and graphics controller resources.
Bjorn
Quoted 8 lines · Bjorn Helgaas
Quoted 7 lines · Pete Zaitcev
Quoted 3 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?
Quoted 8 lines
Quoted 2 lines
Done, new bug:
http://bugzilla.kernel.org/show_bug.cgi?id=15533Thanks! Sorry, I should have asked for the "pci=nocrs" (working) dmesg, too. Do you have that handy? What kind of machine is this? I don't suppose you have Windows on it; I'd really like to know what the Device Manager says about the PCI host bridge and graphics controller resources.
I added two patches to the bugzilla:
http://bugzilla.kernel.org/attachment.cgi?id=25522 (possible fix)
http://bugzilla.kernel.org/attachment.cgi?id=25523 (additional debug)
If the first patch fixes it, we're all set. If it doesn't, I'd like the additional debug info from the second patch.
Thanks!
Bjorn
Quoted 11 lines · Bjorn Helgaas
Quoted 10 lines · Bjorn Helgaas
Quoted 9 lines · Pete Zaitcev
Quoted 3 lines · On Fri, 12 Mar 2010 22:37:56 -0700 Bjorn Helgaas <[email protected]> wrote:
Thanks for the report. Would you mind posting the entire dmesg log,
/proc/iomemcontents, and "lspci -vv" output somewhere (maybe in bugzilla)?Done, new bug:
http://bugzilla.kernel.org/show_bug.cgi?id=15533
Any luck testing the patch from the bugzilla? I'd really like to get this figured out so we can get the fix in the next -rc and move on to the next _CRS issue :-)
Bjorn
Quoted 5 lines · On Wed, 17 Mar 2010 08:26:59 -0700 Bjorn Helgaas <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Any luck testing the patch from the bugzilla? I'd really like to get this figured out so we can get the fix in the next -rc and move on to the next
_CRSissue :-)
I was on vacation, sorry. Got to it today. In short, the test patch fails. Please see the dmesg with ACPI debugging in bugzilla as requested.
-- Pete
Quoted 11 lines · Pete Zaitcev
Quoted 5 lines · On Wed, 17 Mar 2010 08:26:59 -0700 Bjorn Helgaas <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Any luck testing the patch from the bugzilla? I'd really like to get this figured out so we can get the fix in the next -rc and move on to the next
_CRSissue :-)I was on vacation, sorry. Got to it today. In short, the test patch fails. Please see the dmesg with ACPI debugging in bugzilla as requested.
Ping! If you haven't seen the last bugzilla update, I'd really like an acpidump and some details about what machine this is.
Thanks,
Bjorn