ColdFire: Correct bit definition
PATCH 1/13 ColdFire: Correct bit definition
Use correct definition for _MASK and _UNMASK. It was combined in the previous used and causes confusion.
Signed-off-by TsiChung Liew <[email protected]>
--- board/freescale/m54455evb/m54455evb.c | 2 +- cpu/mcf5227x/cpu_init.c | 12 ++-- cpu/mcf52x2/cpu_init.c | 14 ++-- cpu/mcf532x/cpu_init.c | 12 ++-- cpu/mcf532x/speed.c | 2 +- cpu/mcf5445x/cpu_init.c | 4 +- include/asm-m68k/m520x.h | 89 +++++++++++++------------- include/asm-m68k/m5227x.h | 108 +++++++++++++++---------------- include/asm-m68k/m5235.h | 4 +- include/asm-m68k/m5301x.h | 112 ++++++++++++++++---------------- include/asm-m68k/m5445x.h | 56 ++++++++-------- 11 files changed, 206 insertions(+), 209 deletions(-)
board/freescale/m54455evb/m54455evb.c +1 -1
@@ -107,7 +107,7 @@ int ide_preinit(void) {volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO ; - gpio->par_fec |= (gpio->par_fec &GPIO_PAR_FEC_FEC1_MASK ) |0x10 ; + gpio->par_fec |= (gpio->par_fec &GPIO_PAR_FEC_FEC1_UNMASK ) |0x10 ; gpio->par_feci2c |= (gpio->par_feci2c &0xF0FF ) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR |GPIO_PAR_FECI2C_MDIO1_ATA_DIOW );
cpu/mcf5227x/cpu_init.c +6 -6
@@ -133,19 +133,19 @@ void uart_port_conf(void)switch (CONFIG_SYS_UART_PORT ) {case 0 : gpio->par_uart &= - (GPIO_PAR_UART_U0TXD_MASK &GPIO_PAR_UART_U0RXD_MASK ); + (GPIO_PAR_UART_U0TXD_UNMASK &GPIO_PAR_UART_U0RXD_UNMASK ); gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD |GPIO_PAR_UART_U0RXD_U0RXD );break ;case 1 : gpio->par_uart &= - (GPIO_PAR_UART_U1TXD_MASK &GPIO_PAR_UART_U1RXD_MASK ); + (GPIO_PAR_UART_U1TXD_UNMASK &GPIO_PAR_UART_U1RXD_UNMASK ); gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD |GPIO_PAR_UART_U1RXD_U1RXD );break ;case 2 : gpio->par_dspi &= - (GPIO_PAR_DSPI_SIN_MASK &GPIO_PAR_DSPI_SOUT_MASK ); + (GPIO_PAR_DSPI_SIN_UNMASK &GPIO_PAR_DSPI_SOUT_UNMASK ); gpio->par_dspi = (GPIO_PAR_DSPI_SIN_U2RXD |GPIO_PAR_DSPI_SOUT_U2TXD );break ;
@@ -175,11 +175,11 @@ int cfspi_claim_bus(uint bus, uint cs)switch (cs) {case 0 : - gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_MASK ; + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_UNMASK ; gpio->par_dspi |=GPIO_PAR_DSPI_PCS0_PCS0 ;break ;case 2 : - gpio->par_timer &=GPIO_PAR_TIMER_T2IN_MASK ; + gpio->par_timer &=GPIO_PAR_TIMER_T2IN_UNMASK ; gpio->par_timer |=GPIO_PAR_TIMER_T2IN_DSPIPCS2 ;break ; }
@@ -199,7 +199,7 @@ void cfspi_release_bus(uint bus, uint cs) gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0 ;break ;case 2 : - gpio->par_timer &=GPIO_PAR_TIMER_T2IN_MASK ; + gpio->par_timer &=GPIO_PAR_TIMER_T2IN_UNMASK ;break ; } }
cpu/mcf52x2/cpu_init.c +7 -7
@@ -142,29 +142,29 @@ void uart_port_conf(void)/* Setup Ports: */ switch (CONFIG_SYS_UART_PORT ) {case 0 : - gpio->par_uart &=GPIO_PAR_UART0_MASK ; + gpio->par_uart &=GPIO_PAR_UART0_UNMASK ; gpio->par_uart |= (GPIO_PAR_UART_U0TXD |GPIO_PAR_UART_U0RXD );break ;case 1 : - gpio->par_uart &=GPIO_PAR_UART0_MASK ; + gpio->par_uart &=GPIO_PAR_UART0_UNMASK ; gpio->par_uart |= (GPIO_PAR_UART_U1TXD |GPIO_PAR_UART_U1RXD );break ;case 2 :#ifdef CONFIG_SYS_UART2_PRI_GPIO gpio->par_timer &= - (GPIO_PAR_TMR_TIN0_MASK |GPIO_PAR_TMR_TIN1_MASK ); + (GPIO_PAR_TMR_TIN0_UNMASK |GPIO_PAR_TMR_TIN1_UNMASK ); gpio->par_timer |= (GPIO_PAR_TMR_TIN0_U2TXD |GPIO_PAR_TMR_TIN1_U2RXD );#endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_MDC_MASK |GPIO_PAR_FECI2C_MDIO_MASK ); + (GPIO_PAR_FECI2C_MDC_UNMASK |GPIO_PAR_FECI2C_MDIO_UNMASK ); gpio->par_feci2c |= (GPIO_PAR_FECI2C_MDC_U2TXD |GPIO_PAR_FECI2C_MDIO_U2RXD );#endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_SDA_MASK |GPIO_PAR_FECI2C_SCL_MASK ); + (GPIO_PAR_FECI2C_SDA_UNMASK |GPIO_PAR_FECI2C_SCL_UNMASK ); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD |GPIO_PAR_FECI2C_SCL_U2RXD );#endif
@@ -184,8 +184,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear)GPIO_PAR_FECI2C_MDC_MDC |GPIO_PAR_FECI2C_MDIO_MDIO ; }else { gpio->par_fec &= - (GPIO_PAR_FEC_7W_MASK &GPIO_PAR_FEC_MII_MASK ); - gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII_MASK ; + (GPIO_PAR_FEC_7W_UNMASK &GPIO_PAR_FEC_MII_UNMASK ); + gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII_UNMASK ; }return 0 ; }
cpu/mcf532x/cpu_init.c +6 -6
@@ -145,12 +145,12 @@ void uart_port_conf(void)case 1 :#ifdef CONFIG_SYS_UART1_ALT1_GPIO gpio->par_simp1h &= - ~(GPIO_PAR_SIMP1H_DATA1_MASK |GPIO_PAR_SIMP1H_VEN1_MASK ); + ~(GPIO_PAR_SIMP1H_DATA1_UNMASK |GPIO_PAR_SIMP1H_VEN1_UNMASK ); gpio->par_simp1h |= (GPIO_PAR_SIMP1H_DATA1_U1TXD |GPIO_PAR_SIMP1H_VEN1_U1RXD );#elif defined(CONFIG_SYS_UART1_ALT2_GPIO ) gpio->par_ssih &= - ~(GPIO_PAR_SSIH_RXD_MASK |GPIO_PAR_SSIH_TXD_MASK ); + ~(GPIO_PAR_SSIH_RXD_UNMASK |GPIO_PAR_SSIH_TXD_UNMASK ); gpio->par_ssih |= (GPIO_PAR_SSIH_RXD_U1RXD |GPIO_PAR_SSIH_TXD_U1TXD );#endif
@@ -160,12 +160,12 @@ void uart_port_conf(void) gpio->par_uart |= (GPIO_PAR_UART_U2TXD |GPIO_PAR_UART_U2RXD );#elif defined(CONFIG_SYS_UART2_ALT1_GPIO ) gpio->par_dspih &= - ~(GPIO_PAR_DSPIH_SIN_MASK |GPIO_PAR_DSPIH_SOUT_MASK ); + ~(GPIO_PAR_DSPIH_SIN_UNMASK |GPIO_PAR_DSPIH_SOUT_UNMASK ); gpio->par_dspih |= (GPIO_PAR_DSPIH_SIN_U2RXD |GPIO_PAR_DSPIH_SOUT_U2TXD );#elif defined(CONFIG_SYS_UART2_ALT2_GPIO ) gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_SDA_MASK |GPIO_PAR_FECI2C_SCL_MASK ); + ~(GPIO_PAR_FECI2C_SDA_UNMASK |GPIO_PAR_FECI2C_SCL_UNMASK ); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD |GPIO_PAR_FECI2C_SCL_U2RXD );#endif
@@ -195,11 +195,11 @@ int fecpin_setclear(struct eth_device *dev, int setclear)if (info->iobase ==CONFIG_SYS_FEC0_IOBASE ) { gpio->par_fec &= ~(GPIO_PAR_FEC0_7W_FEC |GPIO_PAR_FEC0_RMII_FEC ); - gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII0_MASK ; + gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII0_UNMASK ; }else { gpio->par_fec &= ~(GPIO_PAR_FEC1_7W_FEC |GPIO_PAR_FEC1_RMII_FEC ); - gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII1_MASK ; + gpio->par_feci2c &=GPIO_PAR_FECI2C_RMII1_UNMASK ; } }return 0 ;
cpu/mcf532x/speed.c +1 -1
@@ -229,7 +229,7 @@ int clock_pll(int fsys, int flags)PLL_PDR_OUTDIV3 ((BUSDIV /2 ) -1 ) |PLL_PDR_OUTDIV4 (USBDIV -1 ); - pll->pcr &=PLL_PCR_FBDIV_MASK ; + pll->pcr &=PLL_PCR_FBDIV_UNMASK ; pll->pcr |=PLL_PCR_FBDIV (mfd -1 );#endif #ifdef CONFIG_MCF532x
cpu/mcf5445x/cpu_init.c +2 -2
@@ -164,9 +164,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear) ~(GPIO_PAR_FECI2C_MDC0_MDC0 |GPIO_PAR_FECI2C_MDIO0_MDIO0 );if (info->iobase ==CONFIG_SYS_FEC0_IOBASE ) - gpio->par_fec &=GPIO_PAR_FEC_FEC0_MASK ; + gpio->par_fec &=GPIO_PAR_FEC_FEC0_UNMASK ;else - gpio->par_fec &=GPIO_PAR_FEC_FEC1_MASK ; + gpio->par_fec &=GPIO_PAR_FEC_FEC1_UNMASK ; }return 0 ; }
include/asm-m68k/m520x.h +44 -45
210 lines not on this page · raw message
include/asm-m68k/m5227x.h +53 -55
348 lines not on this page · raw message
include/asm-m68k/m5235.h +2 -2
@@ -557,8 +557,8 @@#define CCM_RCON_MODE (0x0001)/* Bit definitions and macros for CCM_CIR */ -#define CCM_CIR_PIN (x) (((x)&0x03FF)<<6) -#define CCM_CIR_PRN (x) ((x)&0x003F) +#define CCM_CIR_PIN (x) (((x) & 0xFFC0) >> 6) +#define CCM_CIR_PRN (x) ((x) & 0x003F)/********************************************************************* * PLL Clock Module
include/asm-m68k/m5301x.h +56 -56
267 lines not on this page · raw message
include/asm-m68k/m5445x.h +28 -28
185 lines not on this page · raw message
Signature · 1 line
1.6.2.5