VPAC270: Add touchscreen support
Subsystems (3)
PATCH 1/1 VPAC270: Add touchscreen support
This adds support for the UCB1400 touchscreen found in the VPAC270 device.
Signed-off-by Marek Vasut <[email protected]>
--- arch/arm/mach-pxa/vpac270.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/vpac270.c +42 -0
@@ -22,11 +22,13 @@#include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/dm9000.h> +#include <linux/ucb1400.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/pxa27x.h> +#include <mach/audio.h> #include <mach/vpac270.h> #include <mach/mmc.h> #include <mach/pxafb.h>
@@ -121,6 +123,15 @@ static unsigned long vpac270_pin_config[] __initdata = {/* Ethernet */ GPIO114_GPIO ,/* IRQ */ + +/* AC97 */ +GPIO28_AC97_BITCLK , +GPIO29_AC97_SDATA_IN_0 , +GPIO30_AC97_SDATA_OUT , +GPIO31_AC97_SYNC , + GPIO95_AC97_nRESET, +GPIO98_AC97_SYSCLK , + GPIO113_GPIO, /* TS IRQ */ };/******************************************************************************
@@ -357,6 +368,36 @@ static inline void vpac270_eth_init(void) {}#endif /****************************************************************************** +* Audio and Touchscreen +******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400 ) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE ) +static pxa2xx_audio_ops_t vpac270_ac97_pdata = { + .reset_gpio =95 , +}; + +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq =IRQ_GPIO (113 ), +}; + +static struct platform_device vpac270_ucb1400_device = { + .name ="ucb1400_core" , + .id =-1 , + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init vpac270_ts_init (void ) +{ +pxa_set_ac97_info (&vpac270_ac97_pdata); +platform_device_register (&vpac270_ucb1400_device); +} +#else +static inline void vpac270_ts_init (void ) {} +#endif + +/****************************************************************************** * Framebuffer ******************************************************************************/ #if defined(CONFIG_FB_PXA ) || defined(CONFIG_FB_PXA_MODULE )
@@ -439,6 +480,7 @@ static void __init vpac270_init(void)vpac270_uhc_init ();vpac270_udc_init ();vpac270_eth_init (); +vpac270_ts_init (); }MACHINE_START (VPAC270 ,"Voipac PXA270" )
Signature · 1 line
1.7.0
Eric Miao
AppliedPATCH 1/1 VPAC270: Add touchscreen support
Quoted 3 lines · Marek Vasut
This adds support for the UCB1400 touchscreen found in the VPAC270 device.
Signed-off-by Marek Vasut <[email protected]>
Applied to 'devel'.