libata fixes
PATCH 1/1 libata fixes
This push includes a fix for the ata_piix timeouts people have been seeing... it has seen several successful test reports, and is ready for wider testing in 2.6.34-rc.
Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/libata-sff.c | 43 ++++++++++++++++++++++++++++++++++++------- drivers/ata/pata_via.c | 1 + 2 files changed, 37 insertions(+), 7 deletions(-)
[email protected] (1):
pata_via: Add VIA VX900 support
Tejun Heo (1):
libata-sff: fix spurious IRQ handling
drivers/ata/libata-sff.c +36 -7
@@ -1667,6 +1667,7 @@ unsigned int ata_sff_host_intr(struct ata_port *ap, {struct ata_eh_info *ehi = &ap->link.eh_info;u8 status, host_stat =0 ; +bool bmdma_stopped = false;VPRINTK ("ata%u: protocol %d task_state %d\n" , ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1699,6 +1700,7 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,/* before we do anything else, clear DMA-Start bit */ ap->ops->bmdma_stop (qc); + bmdma_stopped = true;if (unlikely (host_stat &ATA_DMA_ERR )) {/* error when transfering data to/from memory */
@@ -1716,8 +1718,14 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,/* check main status, clearing INTRQ if needed */ status =ata_sff_irq_status (ap); -if (status &ATA_BUSY ) - goto idle_irq; +if (status &ATA_BUSY ) { +if (bmdma_stopped) { +/* BMDMA engine is already stopped, we're screwed */ + qc->err_mask |=AC_ERR_HSM ; + ap->hsm_task_state =HSM_ST_ERR ; + }else + goto idle_irq; + }/* ack bmdma irq events */ ap->ops->sff_irq_clear (ap);
@@ -1762,13 +1770,16 @@ EXPORT_SYMBOL_GPL(ata_sff_host_intr);irqreturn_t ata_sff_interrupt (int irq,void *dev_instance) {struct ata_host *host = dev_instance; +bool retried = false;unsigned int i; -unsigned int handled =0 , polling =0 ; +unsigned int handled, idle, polling;unsigned long flags;/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ spin_lock_irqsave (&host->lock, flags); +retry: + handled = idle = polling =0 ;for (i =0 ; i < host->n_ports; i++) {struct ata_port *ap = host->ports[i];struct ata_queued_cmd *qc;
@@ -1782,7 +1793,8 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) handled |=ata_sff_host_intr (ap, qc); else polling |= 1 << i; - } + }else + idle |=1 << i; }/*
@@ -1790,7 +1802,9 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)* asserting IRQ line, nobody cared will ensue. Check IRQ * pending status if available and clear spurious IRQ. */ -if (!handled) { +if (!handled && !retried) { +bool retry = false; +for (i =0 ; i < host->n_ports; i++) {struct ata_port *ap = host->ports[i];
@@ -1805,8 +1819,23 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)ata_port_printk (ap,KERN_INFO ,"clearing spurious IRQ\n" ); - ap->ops->sff_check_status (ap); - ap->ops->sff_irq_clear (ap); +if (idle & (1 << i)) { + ap->ops->sff_check_status (ap); + ap->ops->sff_irq_clear (ap); + }else { +/* clear INTRQ and check if BUSY cleared */ +if (!(ap->ops->sff_check_status (ap) &ATA_BUSY )) + retry |= true; +/* +* With command in flight, we can't do +* sff_irq_clear() w/o racing with completion. +*/ + } + } + +if (retry) { + retried = true; + goto retry; } }
drivers/ata/pata_via.c +1 -0
@@ -677,6 +677,7 @@ static const struct pci_device_id via[] = { { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, + { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE }, { }, };
Quoted 3 lines · Jeff Garzik
This push includes a fix for the
ata_piixtimeouts people have been seeing... it has seen several successful test reports, and is ready for wider testing in 2.6.34-rc.
My OCZ Solid was giving me timeouts. I thought it was about to die, so I bought an Intel X-25M urgently, copied my data, but the timeouts continued.
After some googling I found that a patch for that was sent this very morning! After applying the patch, the timeouts have stopped. They would appear minutes after reboot, but it has been over an hour since I rebooted and no timeouts.
My motherboard is ECS G31T-M, which is not AHCI capable, so I was using ata_piix, which explains why I was affected. My kernel is 2.6.34-rc2 (actually, wireless-testing.git).
By all means, please push this patch to all stable kernels, or more money will be wasted on hard drives ;-)
Signature · 2 lines
Regards, Pavel Roskin
Quoted 2 lines · Pavel Roskin
By all means, please push this patch to all stable kernels, or more money will be wasted on hard drives ;-)
Oh, the original patch which caused the problem never saw the light of the day before 2.6.34-rc1 so there's no stable kernel to push the patch into.
Thanks.
Signature · 1 line
tejun
Quoted 7 lines · Tejun Heo
Quoted 2 lines · Pavel Roskin
By all means, please push this patch to all stable kernels, or more money will be wasted on hard drives ;-)
Oh, the original patch which caused the problem never saw the light of the day before 2.6.34-rc1 so there's no stable kernel to push the patch into.
It looks like I'm still getting "clearing spurious IRQ". In most cases, it's not followed by anything, but in one case, there was a lost interrupt followed by a link reset.
[ 5030.881191] ata2: clearing spurious IRQ
[ 5060.950036] ata2: lost interrupt (Status 0x50)
[ 5060.950055] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 5060.950059] ata2.01: failed command: WRITE DMA
[ 5060.950066] ata2.01: cmd ca/00:08:b7:11:a9/00:00:00:00:00/f0 tag 0
dma 4096 out
[ 5060.950068] res 40/00:00:00:4f:c2/00:00:00:00:00/10 Emask
0x4 (timeout)
[ 5060.950071] ata2.01: status: { DRDY }
[ 5060.950080] ata2: soft resetting link
[ 5061.160268] ata2.01: configured for UDMA/133
[ 5061.160275] ata2.01: device reported invalid CHS sector 0
[ 5061.160283] ata2: EH complete
[80540.010652] ata2: clearing spurious IRQThat last line is apparently a separate event.
Signature · 2 lines
Regards, Pavel Roskin
Quoted 1 line · Pavel Roskin
It looks like I'm still getting "clearing spurious IRQ".
Sorry, my mistake. I reverted the patch by accident. Please ignore.
Signature · 2 lines
Regards, Pavel Roskin