config_cmd_all.h: added missing CONFIG_CMD_UBI and CONFIG_CMD_UBIFS
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/2 config_cmd_all.h: added missing CONFIG_CMD_UBI and CONFIG_CMD_UBIFS
From: Frans Meulenbroeks <[email protected]>
Signed-off-by Frans Meulenbroeks <[email protected]>
--- include/config_cmd_all.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/config_cmd_all.h +2 -0
@@ -79,6 +79,8 @@#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_SPI /* SPI utility */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ #define CONFIG_CMD_UNZIP /* unzip from memory to memory */ #define CONFIG_CMD_USB /* USB Support */
Signature · 1 line
1.6.2.5
PATCH 2/2 config_cmd_all.h: Sort entries alphabetically
Signed-off-by Detlev Zundel <[email protected]>
--- include/config_cmd_all.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
include/config_cmd_all.h +3 -3
@@ -15,6 +15,7 @@#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ #define CONFIG_CMD_ASKENV /* ask for env variable */ +#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ #define CONFIG_CMD_BMP /* BMP support */
@@ -33,7 +34,6 @@#define CONFIG_CMD_EDITENV /* editenv */ #define CONFIG_CMD_EEPROM /* EEPROM read/write support */ #define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ -#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_FDC /* Floppy Disk Support */
@@ -55,6 +55,7 @@#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ +#define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */ #define CONFIG_CMD_MII /* MII support */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ #define CONFIG_CMD_MMC /* MMC support */
@@ -70,6 +71,7 @@#define CONFIG_CMD_REGINFO /* Register dump */ #define CONFIG_CMD_REISER /* Reiserfs support */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ #define CONFIG_CMD_SCSI /* SCSI Support */ #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
@@ -86,7 +88,5 @@#define CONFIG_CMD_USB /* USB Support */ #define CONFIG_CMD_VFD /* VFD support (TRAB) */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ -#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */ -#define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */ #endif /* _CONFIG_CMD_ALL_H */
Signature · 1 line
1.6.2.5
Wolfgang Denk
AppliedPATCH 2/2 config_cmd_all.h: Sort entries alphabetically
Dear Detlev Zundel,
Quoted 4 lines · In message <[email protected]> you wrote:
Signed-off-by Detlev Zundel <[email protected]>--- include/config_cmd_all.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
Thanks, applied.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Es sind ?berhaupt nur die Dummk?pfe, die sich den Befehlen der M?ch- tigen widersetzen. Um sie zu ruinieren ist es genug, ihre Befehle treu zu erf?llen. - Peter Hacks: "Die sch?ne Helena"
Wolfgang Denk
AppliedPATCH 1/2 config_cmd_all.h: added missing CONFIG_CMD_UBI and CONFIG_CMD_UBIFS
In reply to Detlev ZundelDear Detlev Zundel,
Quoted 6 lines · In message <[email protected]> you wrote:
From: Frans Meulenbroeks <[email protected]>
Signed-off-by Frans Meulenbroeks <[email protected]>--- include/config_cmd_all.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
Thanks, applied.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There is a time in the tides of men, Which, taken at its flood, leads on to success. On the other hand, don't count on it. - T. K. Lawson