Skip to contentSkip to conversation

X25: Use identifiers for lapbether device to x25 interface

PATCH In review Andrew Hendry 1 participant 1 message Apr 18, 2010

Subsystems (3)
Networking Network drivers X.25 stack
lore
Share & tools
lore

Andrew Hendry

author
#0 lore raw

PATCH 4/6 X25: Use identifiers for lapbether device to x25 interface

Change magic numbers to identifiers for X25 interface.

Signed-off-by Andrew Hendry <[email protected]>
---
 drivers/net/wan/lapbether.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)
drivers/net/wan/lapbether.c +6 -6
index 98e2f99..4d4dc38 100644
@@ -139,7 +139,7 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb)
 		return NET_RX_DROP;
 
 	ptr  = skb->data;
-	*ptr = 0x00;
+	*ptr = X25_IFACE_DATA;
 
 	skb->protocol = x25_type_trans(skb, dev);
 	return netif_rx(skb);

@@ -161,14 +161,14 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
 		goto drop;
 
 	switch (skb->data[0]) {
-	case 0x00:
+	case X25_IFACE_DATA:
 		break;
-	case 0x01:
+	case X25_IFACE_CONNECT:
 		if ((err = lapb_connect_request(dev)) != LAPB_OK)
 			printk(KERN_ERR "lapbeth: lapb_connect_request "
 			       "error: %d\n", err);
 		goto drop;
-	case 0x02:
+	case X25_IFACE_DISCONNECT:
 		if ((err = lapb_disconnect_request(dev)) != LAPB_OK)
 			printk(KERN_ERR "lapbeth: lapb_disconnect_request "
 			       "err: %d\n", err);

@@ -225,7 +225,7 @@ static void lapbeth_connected(struct net_device *dev, int reason)
 	}
 
 	ptr  = skb_put(skb, 1);
-	*ptr = 0x01;
+	*ptr = X25_IFACE_CONNECT;
 
 	skb->protocol = x25_type_trans(skb, dev);
 	netif_rx(skb);

@@ -242,7 +242,7 @@ static void lapbeth_disconnected(struct net_device *dev, int reason)
 	}
 
 	ptr  = skb_put(skb, 1);
-	*ptr = 0x02;
+	*ptr = X25_IFACE_DISCONNECT;
 
 	skb->protocol = x25_type_trans(skb, dev);
 	netif_rx(skb);
Signature · 1 line
1.5.6.5