Skip to contentSkip to conversation

Staging: wlan-ng: fix many style warnings in hfa384x_usb.c

PATCH In review Alessandro Ghedini 3 participants 3 messages Apr 22, 2010 – Apr 23, 2010 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Staging: wlan-ng: fix many style warnings in hfa384x_usb.c

This patch fixes most of the style warnings found with checkpatch.pl in the hfa384x_usb.c file.

---
 drivers/staging/wlan-ng/hfa384x_usb.c |   60 ++++++++++++++++++--------------
 1 files changed, 34 insertions(+), 26 deletions(-)
drivers/staging/wlan-ng/hfa384x_usb.c +34 -26
index 5df56f0..7f476b7 100644
@@ -62,7 +62,7 @@
 *
 * hfa384x_drvr_xxxconfig  An example of the drvr level abstraction. These
 *			functions are wrappers for the RID get/set
-*			sequence. They 	call copy_[to|from]_bap() and
+*			sequence. They call copy_[to|from]_bap() and
 *			cmd_access().	These functions operate on the
 *			RIDs and buffers without validation.  The caller
 *			is responsible for that.
@@ -351,7 +351,9 @@ static int submit_rx_urb(hfa384x_t *hw, gfp_t memflags)
 	hw->rx_urb_skb = skb;
 
 	result = -ENOLINK;
-	if (!hw->wlandev->hwremoved && !test_bit(WORK_RX_HALT, &hw->usb_flags)) {
+	if (!hw->wlandev->hwremoved &&
+			!test_bit(WORK_RX_HALT, &hw->usb_flags)) {
+
 		result = SUBMIT_URB(&hw->rx_urb, memflags);
 
 		/* Check whether we need to reset the RX pipe */
@@ -451,7 +453,8 @@ static void hfa384x_usb_defer(struct work_struct *data)
 	if (test_bit(WORK_RX_HALT, &hw->usb_flags)) {
 		int ret;
 
-		usb_kill_urb(&hw->rx_urb);	/* Cannot be holding spinlock! */
+		/* Cannot be holding spinlock! */
+		usb_kill_urb(&hw->rx_urb);
 
 		ret = usb_clear_halt(hw->usb, hw->endp_in);
 		if (ret != 0) {
@@ -1226,7 +1229,7 @@ int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
 *
 * Arguments:
 *	hw		device structure
-*	ctlx	 	CTLX ptr
+*	ctlx		CTLX ptr
 *	completor	functor object to decide what to
 *			do with the CTLX's result.
 *
@@ -2075,12 +2078,9 @@ int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 			    (j * HFA384x_USB_RWMEM_MAXLEN);
 
 			writepage = HFA384x_ADDR_CMD_MKPAGE(dlbufaddr +
-							    (j *
-							     HFA384x_USB_RWMEM_MAXLEN));
-			writeoffset =
-			    HFA384x_ADDR_CMD_MKOFF(dlbufaddr +
-						   (j *
-						    HFA384x_USB_RWMEM_MAXLEN));
+					(j * HFA384x_USB_RWMEM_MAXLEN));
+			writeoffset = HFA384x_ADDR_CMD_MKOFF(dlbufaddr +
+					(j * HFA384x_USB_RWMEM_MAXLEN));
 
 			writelen = burnlen - (j * HFA384x_USB_RWMEM_MAXLEN);
 			writelen = writelen > HFA384x_USB_RWMEM_MAXLEN ?
@@ -2133,7 +2133,7 @@ exit_proc:
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ENODATA 	length mismatch between argument and retrieved
+*	-ENODATA	length mismatch between argument and retrieved
 *			record.
 *
 * Side effects:
@@ -2451,7 +2451,8 @@ int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len)
 		currpage = HFA384x_ADDR_CMD_MKPAGE(pdaloc[i].cardaddr);
 		curroffset = HFA384x_ADDR_CMD_MKOFF(pdaloc[i].cardaddr);
 
-		result = hfa384x_dormem_wait(hw, currpage, curroffset, buf, len);	/* units of bytes */
+		result = hfa384x_dormem_wait(hw, currpage, curroffset, \
+					buf, len); /* units of bytes */
 
 		if (result) {
 			printk(KERN_WARNING
@@ -2610,20 +2611,21 @@ int hfa384x_drvr_start(hfa384x_t *hw)
 	result = result2 = hfa384x_cmd_initialize(hw);
 	if (result1 != 0) {
 		if (result2 != 0) {
-			printk(KERN_ERR
-			       "cmd_initialize() failed on two attempts, results %d and %d\n",
+			printk(KERN_ERR "cmd_initialize() failed on two" \
+					"attempts, results %d and %d\n",
 			       result1, result2);
 			usb_kill_urb(&hw->rx_urb);
 			goto done;
 		} else {
 			pr_debug("First cmd_initialize() failed (result %d),\n",
 				 result1);
-			pr_debug
-			    ("but second attempt succeeded. All should be ok\n");
+			pr_debug("but second attempt succeeded. " \
+						"All should be ok\n");
 		}
 	} else if (result2 != 0) {
 		printk(KERN_WARNING
-		       "First cmd_initialize() succeeded, but second attempt failed (result=%d)\n",
+		       "First cmd_initialize() succeeded, but second " \
+					"attempt failed (result=%d)\n",
 		       result2);
 		printk(KERN_WARNING
 		       "Most likely the card will be functional\n");
@@ -3382,8 +3384,9 @@ retry:
 			 * our request has been acknowledged. Odd,
 			 * but our OUT URB is still alive...
 			 */
-			pr_debug
-			    ("Causality violation: please reboot Universe, or email [email protected]\n");
+			pr_debug("Causality violation: please reboot " \
+				"Universe, or email " \
+				"[email protected]\n");
 			ctlx->state = CTLX_RESP_COMPLETE;
 			break;
 
@@ -3442,7 +3445,7 @@ static void hfa384x_usbin_txcompl(wlandevice_t *wlandev,
 {
 	u16 status;
 
-	status = le16_to_cpu(usbin->type);	/* yeah I know it says type... */
+	status = le16_to_cpu(usbin->type); /* yeah I know it says type... */
 
 	/* Was there an error? */
 	if (HFA384x_TXSTATUS_ISERROR(status))
@@ -3583,8 +3586,10 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 	struct sk_buff *skb;
 	hfa384x_t *hw = wlandev->priv;
 
-	/* Don't forget the status, time, and data_len fields are in host order */
-	/* Figure out how big the frame is */
+	/* Don't forget the status, time, and data_len fields are in
+	 * host order
+	 * Figure out how big the frame is
+	 */
 	fc = le16_to_cpu(rxdesc->frame_control);
 	hdrlen = p80211_headerlen(fc);
 	datalen = le16_to_cpu(rxdesc->data_len);
@@ -3632,7 +3637,9 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 		caphdr->encoding = htonl(1);	/* cck */
 	}
 
-	/* Copy the 802.11 header to the skb (ctl frames may be less than a full header) */
+	/* Copy the 802.11 header to the skb (ctl frames may be less
+	 * than a full header)
+	 */
 	datap = skb_put(skb, hdrlen);
 	memcpy(datap, &(rxdesc->frame_control), hdrlen);
 
@@ -3644,7 +3651,8 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 		/* check for unencrypted stuff if WEP bit set. */
 		if (*(datap - hdrlen + 1) & 0x40)	/* wep set */
 			if ((*(datap) == 0xaa) && (*(datap + 1) == 0xaa))
-				*(datap - hdrlen + 1) &= 0xbf;	/* clear wep; it's the 802.2 header! */
+				/* clear wep; it's the 802.2 header! */
+				*(datap - hdrlen + 1) &= 0xbf;
 	}
 
 	if (hw->sniff_fcs) {
@@ -3845,8 +3853,8 @@ retry:
 
 		default:
 			/* This is NOT a valid CTLX "success" state! */
-			printk(KERN_ERR
-			       "Illegal CTLX[%d] success state(%s, %d) in OUT URB\n",
+			printk(KERN_ERR "Illegal CTLX[%d] success " \
+					"state(%s, %d) in OUT URB\n",
 			       le16_to_cpu(ctlx->outbuf.type),
 			       ctlxstr(ctlx->state), urb->status);
 			break;
Signature · 1 line
1.7.0.4
#1 lore raw
Quoted 3 lines · Alessandro Ghedini

This patch fixes most of the style warnings found with checkpatch.pl in the hfa384x_usb.c file.

Hi Alessandro.

http://driverdev.linuxdriverproject.org/pipermail/devel/2010-April/005105.html
http://driverdev.linuxdriverproject.org/pipermail/devel/2010-April/005106.html

When you get feedback about style changes in your patch submission, you should see if the feedback applies to more than just a single instance in your patch.

drivers/staging/wlan-ng/hfa384x_usb.c int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len) · line 2455

Quoted 7 lines
drivers/staging/wlan-ng/hfa384x_usb.c +2 -1
@@ -2451,7 +2451,8 @@ int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len)
 		currpage = HFA384x_ADDR_CMD_MKPAGE(pdaloc[i].cardaddr);
 		curroffset = HFA384x_ADDR_CMD_MKOFF(pdaloc[i].cardaddr);
 
-		result = hfa384x_dormem_wait(hw, currpage, curroffset, buf, len);	/* units of bytes */
+		result = hfa384x_dormem_wait(hw, currpage, curroffset, \
+					buf, len); /* units of bytes */

These unnecessary line continuations are many.
Please remove them.

drivers/staging/wlan-ng/hfa384x_usb.c int hfa384x_drvr_start(hfa384x_t *hw) · line 2615

Quoted 8 lines
drivers/staging/wlan-ng/hfa384x_usb.c +2 -2
@@ -2610,20 +2611,21 @@ int hfa384x_drvr_start(hfa384x_t *hw)
 	result = result2 = hfa384x_cmd_initialize(hw);
 	if (result1 != 0) {
 		if (result2 != 0) {
-			printk(KERN_ERR
-			       "cmd_initialize() failed on two attempts, results %d and %d\n",
+			printk(KERN_ERR "cmd_initialize() failed on two" \
+					"attempts, results %d and %d\n",

here.

drivers/staging/wlan-ng/hfa384x_usb.c int hfa384x_drvr_start(hfa384x_t *hw) · line 2623

Quoted 4 lines
drivers/staging/wlan-ng/hfa384x_usb.c +2 -2
-			pr_debug
-			    ("but second attempt succeeded. All should be ok\n");
+			pr_debug("but second attempt succeeded. " \
+						"All should be ok\n");

here, etc.

@@ -2075,12 +2078,9 @@ int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)

Quoted 4 lines
drivers/staging/wlan-ng/hfa384x_usb.c +0 -1
 			    (j * HFA384x_USB_RWMEM_MAXLEN);
 
 			writepage = HFA384x_ADDR_CMD_MKPAGE(dlbufaddr +
-							    (j *

drivers/staging/wlan-ng/hfa384x_usb.c int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len) · line 2085

Quoted 10 lines
drivers/staging/wlan-ng/hfa384x_usb.c +3 -5
-							     HFA384x_USB_RWMEM_MAXLEN));
-			writeoffset =
-			    HFA384x_ADDR_CMD_MKOFF(dlbufaddr +
-						   (j *
-						    HFA384x_USB_RWMEM_MAXLEN));
+					(j * HFA384x_USB_RWMEM_MAXLEN));
+			writeoffset = HFA384x_ADDR_CMD_MKOFF(dlbufaddr +
+					(j * HFA384x_USB_RWMEM_MAXLEN));
 
 			writelen = burnlen - (j * HFA384x_USB_RWMEM_MAXLEN);

Try not to be slavish in simply fixing the checkpatch errors. The goal isn't just to keep the silly tool quiet but to make code readable and maintainable while making it reasonably conforming to the predominant kernel coding styles.

This code could be simplified and made much more readable by using a temporary for (j * HFA384x_USB_RWMEM_MAXLEN)

Something like:

		for (j = 0; j < nwrites; j++) {
			int pos = j * HFA384x_USB_RWMEM_MAXLEN; 
			writebuf = buf + (i * hw->bufinfo.len) + pos;
			writepage = HFA384x_ADDR_CMD_MKPAGE(dlbufaddr + pos);
			writeoffset = HFA384x_ADDR_CMD_MKOFF(dlbufaddr + pos);
			writelen = burnlen - jmax;

drivers/staging/wlan-ng/hfa384x_usb.c static void hfa384x_int_rxmonitor(wlandevice_t *wlandev, · line 3592

Quoted 10 lines
drivers/staging/wlan-ng/hfa384x_usb.c +4 -2
@@ -3583,8 +3586,10 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 	struct sk_buff *skb;
 	hfa384x_t *hw = wlandev->priv;
 
-	/* Don't forget the status, time, and data_len fields are in host order */
-	/* Figure out how big the frame is */
+	/* Don't forget the status, time, and data_len fields are in
+	 * host order
+	 * Figure out how big the frame is
+	 */

If you're going to convert something like this
perhaps a better style would be:

	/*
	 * Figure out how big the frame is
	 * The status, time and data_len fields are in host order
	 */

drivers/staging/wlan-ng/hfa384x_usb.c static void hfa384x_int_rxmonitor(wlandevice_t *wlandev, · line 3641

Quoted 10 lines
drivers/staging/wlan-ng/hfa384x_usb.c +2 -1
 	fc = le16_to_cpu(rxdesc->frame_control);
 	hdrlen = p80211_headerlen(fc);
 	datalen = le16_to_cpu(rxdesc->data_len);
@@ -3632,7 +3637,9 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 		caphdr->encoding = htonl(1);	/* cck */
 	}
 
-	/* Copy the 802.11 header to the skb (ctl frames may be less than a full header) */
+	/* Copy the 802.11 header to the skb (ctl frames may be less
+	 * than a full header)

If you're breaking comments up like this, use some taste. Don't necessarily fill all comments to the maximum line length.

	/*
	 * Copy the 80211.11 header to the skb
	 * (ctl frames may be less than a full header)
	 */

cheers, Joe

#2 lore raw
In reply to Alessandro Ghedini

drivers/staging/wlan-ng/hfa384x_usb.c int hfa384x_drvr_start(hfa384x_t *hw) · line 2616

Quoted 12 lines · Alessandro Ghedini

This patch fixes most of the style warnings found with checkpatch.pl in the hfa384x_usb.c file.

---

drivers/staging/wlan-ng/hfa384x_usb.c +2 -2
 		if (result2 != 0) {
-			printk(KERN_ERR
-			       "cmd_initialize() failed on two attempts, results %d and %d\n",
+			printk(KERN_ERR "cmd_initialize() failed on two" \
+					"attempts, results %d and %d\n",
 			       result1, result2);

Hi Alessandro,

I'm not keen on splitting up printk strings. It makes it more difficult to grep for them. It's nice and easy if you can just copy most of the log message into grep and get to the correct bit of code.

Quoted 19 lines
drivers/staging/wlan-ng/hfa384x_usb.c +4 -3
 			usb_kill_urb(&hw->rx_urb);
 			goto done;
 		} else {
 			pr_debug("First cmd_initialize() failed (result %d),\n",
 				 result1);
-			pr_debug
-			    ("but second attempt succeeded. All should be ok\n");
+			pr_debug("but second attempt succeeded. " \
+						"All should be ok\n");
 		}
 	} else if (result2 != 0) {
 		printk(KERN_WARNING
-		       "First cmd_initialize() succeeded, but second attempt failed (result=%d)\n",
+		       "First cmd_initialize() succeeded, but second " \
+					"attempt failed (result=%d)\n",
 		       result2);
 		printk(KERN_WARNING
 		       "Most likely the card will be functional\n");

drivers/staging/wlan-ng/hfa384x_usb.c retry: · line 3391

Quoted 10 lines
drivers/staging/wlan-ng/hfa384x_usb.c +3 -2
@@ -3382,8 +3384,9 @@ retry:
 			 * our request has been acknowledged. Odd,
 			 * but our OUT URB is still alive...
 			 */
-			pr_debug
-			    ("Causality violation: please reboot Universe, or email [email protected]\n");
+			pr_debug("Causality violation: please reboot " \
+				"Universe, or email " \
+				"[email protected]\n");
 			ctlx->state = CTLX_RESP_COMPLETE;
 			break;

There has already been a patch for this -- I don't know if it's stuck in Greg's queue or it got lost, but that mailing list is now dead so we can just drop the second half of that message.

regards
Richard