Fix excessive host tick latencies
RFC 1/1 Fix excessive host tick latencies
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
Found while instrumenting the timer core to find RT timer latencies. Hope they become visible now...
Jan
-------
If a reschedule is pending, we won't allow the host timer to decide about the next hardware tick. But if that next reschedule will simply keep ROOT (which, e.g., happens during thread deletion), this deferral can impose significant unwanted timer latencies on Linux.
ksrc/nucleus/pod.c +8 -1
@@ -2184,9 +2184,16 @@ void __xnpod_schedule(struct xnsched *sched) zombie =xnthread_test_state (curr,XNZOMBIE ); next =xnsched_pick_next (sched); -if (next == curr && !xnthread_test_state (curr,XNRESTART )) +if (next == curr && !xnthread_test_state (curr,XNRESTART )) {/* Note: the root thread never restarts. */ +if (unlikely (xnthread_test_state (next,XNROOT ))) { +if (testbits (sched->status,XNHTICK )) +xnintr_host_tick (sched); +if (testbits (sched->status,XNHDEFER )) +xntimer_next_local_shot (sched); + } goto signal_unlock_and_exit; + }XENO_BUGON (NUCLEUS , need_resched ==0 );
Quoted 10 lines · Jan Kiszka
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
Found while instrumenting the timer core to find RT timer latencies. Hope they become visible now...
Note that the behaviour of xnpod_schedule may have changed since the fix of the XENO_OPT_DEBUG_NUCLEUS issue. Notably, some calls to xnpod_schedule should now be skipped if nucleus debug is turned off.
Are you running the tests with or without nucleus debug?
Signature · 1 line
Gilles.
Quoted 9 lines · Gilles Chanteperdrix
Quoted 8 lines · Jan Kiszka
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
Quoted 9 lines
Quoted 2 lines
Found while instrumenting the timer core to find RT timer latencies. Hope they become visible now...
Note that the behaviour of
xnpod_schedulemay have changed since the fix of theXENO_OPT_DEBUG_NUCLEUSissue. Notably, some calls toxnpod_scheduleshould now be skipped if nucleus debug is turned off.Are you running the tests with or without nucleus debug?
Without CONFIG_XENO_OPT_DEBUG_NUCLEUS and with the debug fix applied.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux
Quoted 7 lines · Jan Kiszka
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
That patch is correct, please queue it. Anything that breaks the assumption described in the following comment from xntimer_next_local_shot() is wrong wrt tick deferral: "The host tick deferral is cleared whenever Xenomai is about to yield control to the host kernel".
In short, when the code will match the comments and documentation, we will be done with debugging.
Quoted 36 lines
Found while instrumenting the timer core to find RT timer latencies. Hope they become visible now...
Jan
-------
If a reschedule is pending, we won't allow the host timer to decide about the next hardware tick. But if that next reschedule will simply keep ROOT (which, e.g., happens during thread deletion), this deferral can impose significant unwanted timer latencies on Linux.
ksrc/nucleus/pod.c +8
-1@@ -2184,9 +2184,16 @@ void __xnpod_schedule(struct xnsched *sched) zombie =xnthread_test_state (curr,XNZOMBIE ); next =xnsched_pick_next (sched); -if (next == curr && !xnthread_test_state (curr,XNRESTART )) +if (next == curr && !xnthread_test_state (curr,XNRESTART )) {/* Note: the root thread never restarts. */ +if (unlikely (xnthread_test_state (next,XNROOT ))) { +if (testbits (sched->status,XNHTICK )) +xnintr_host_tick (sched); +if (testbits (sched->status,XNHDEFER )) +xntimer_next_local_shot (sched); + } goto signal_unlock_and_exit; + }XENO_BUGON (NUCLEUS , need_resched ==0 );
Signature · 1 line
Philippe.
Quoted 9 lines · Philippe Gerum
Quoted 7 lines · Jan Kiszka
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
Quoted 8 lines
That patch is correct, please queue it. Anything that breaks the assumption described in the following comment from
xntimer_next_local_shot()is wrong wrt tick deferral: "The host tick deferral is cleared whenever Xenomai is about to yield control to the host kernel".In short, when the code will match the comments and documentation, we will be done with debugging.
What I meant is that with the nucleus debugging fixed, we may not even enter __xnpod_schedule often enough to handle the host tick propagation. So, maybe we should make xnpod_schedule call __xnpod_schedule if XNHTICK or XNHDEFER are set.
Signature · 1 line
Gilles.
Quoted 16 lines · Gilles Chanteperdrix
Quoted 15 lines · Philippe Gerum
Quoted 7 lines · Jan Kiszka
Hi Philippe,
I'm not 100% sure if this plugs all remaining wholes in the deferred host tick processing, but at least the most easiest reproducible one is cured now for me (Linux latency peak after termination of 'latency'). Please let me know if you see more potential issues, otherwise I would include this in my for-upstream queue.
That patch is correct, please queue it. Anything that breaks the assumption described in the following comment from
xntimer_next_local_shot()is wrong wrt tick deferral: "The host tick deferral is cleared whenever Xenomai is about to yield control to the host kernel".
Quoted 8 lines
Quoted 2 lines
In short, when the code will match the comments and documentation, we will be done with debugging.
What I meant is that with the nucleus debugging fixed, we may not even enter
__xnpod_scheduleoften enough to handle the host tick propagation. So, maybe we should makexnpod_schedulecall__xnpod_scheduleif XNHTICK or XNHDEFER are set.
I got that, but this is ok. Deferral is marked whenever the resched bit is already set, or we don't run over the root thread, which means that we will raise the resched bit to switch back to root at some point, and clear the deferral there. IOW, xnpod_schedule() cannot filter out a valid condition for clearing the host timer deferral, in any of its debug/non-debug forms.
Signature · 1 line
Philippe.