Skip to contentSkip to conversation

wireless: ath9k: Fix most coding style issues in ath9k This patch fixed up almost all coding style issues in the ath9k driver found by the ceckpatch.pl tool. Signed-off-by: Michael Sprecher <[email protected]>

PATCH New Michael Sprecher 2 participants 2 messages May 5, 2010 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 wireless: ath9k: Fix most coding style issues in ath9k This patch fixed up almost all coding style issues in the ath9k driver found by the ceckpatch.pl tool. Signed-off-by: Michael Sprecher <[email protected]>

---
 drivers/net/wireless/ath/ath9k/ani.c         |    5 ++-
 drivers/net/wireless/ath/ath9k/ath9k.h       |   30 ++++++++--------
 drivers/net/wireless/ath/ath9k/beacon.c      |    9 +++--
 drivers/net/wireless/ath/ath9k/btcoex.h      |    6 ++--
 drivers/net/wireless/ath/ath9k/calib.c       |   18 +++++-----
 drivers/net/wireless/ath/ath9k/calib.h       |   10 +++---
 drivers/net/wireless/ath/ath9k/common.c      |   20 +++++------
 drivers/net/wireless/ath/ath9k/common.h      |   20 +++++-----
 drivers/net/wireless/ath/ath9k/debug.c       |   12 +++---
 drivers/net/wireless/ath/ath9k/eeprom.c      |    6 ++--
 drivers/net/wireless/ath/ath9k/eeprom.h      |    4 +-
 drivers/net/wireless/ath/ath9k/eeprom_4k.c   |   17 +++++----
 drivers/net/wireless/ath/ath9k/eeprom_9287.c |   14 ++++---
 drivers/net/wireless/ath/ath9k/eeprom_def.c  |   29 +++++++--------
 drivers/net/wireless/ath/ath9k/gpio.c        |    2 +-
 drivers/net/wireless/ath/ath9k/hw.c          |   44 ++++++++++-------------
 drivers/net/wireless/ath/ath9k/hw.h          |   16 ++++----
 drivers/net/wireless/ath/ath9k/init.c        |    4 +-
 drivers/net/wireless/ath/ath9k/mac.h         |    2 +-
 drivers/net/wireless/ath/ath9k/main.c        |   48 +++++++++++++-------------
 drivers/net/wireless/ath/ath9k/phy.c         |   12 +++----
 drivers/net/wireless/ath/ath9k/phy.h         |    4 +-
 drivers/net/wireless/ath/ath9k/rc.c          |   13 +++----
 drivers/net/wireless/ath/ath9k/rc.h          |    4 +-
 drivers/net/wireless/ath/ath9k/recv.c        |    5 +--
 drivers/net/wireless/ath/ath9k/reg.h         |   48 +++++++++++++-------------
 drivers/net/wireless/ath/ath9k/virtual.c     |    3 +-
 drivers/net/wireless/ath/ath9k/xmit.c        |   11 +++---
 28 files changed, 203 insertions(+), 213 deletions(-)
drivers/net/wireless/ath/ath9k/ani.c +3 -2
index 2a0cd64..a9296bb 100644
@@ -170,8 +170,9 @@ static bool ath9k_hw_ani_control(struct ath_hw *ah,
 		break;
 	}
 	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
-		const int cycpwrThr1[] =
-			{ 2, 4, 6, 8, 10, 12, 14, 16 };
+		const int cycpwrThr1[] = {
+			2, 4, 6, 8, 10, 12, 14, 16
+		};
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1)) {
drivers/net/wireless/ath/ath9k/ath9k.h +15 -15
index 83c7ea4..bbd74d3 100644
@@ -55,7 +55,7 @@ struct ath_node;
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define TSF_TO_TU(_h,_l) \
+#define TSF_TO_TU(_h, _l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
 #define	ATH_TXQ_SETUP(sc, i)        ((sc)->tx.txqsetup & (1<<i))
@@ -100,14 +100,14 @@ enum buffer_type {
 	BUF_XRETRY		= BIT(5),
 };
 
-#define bf_nframes      	bf_state.bfs_nframes
-#define bf_al           	bf_state.bfs_al
-#define bf_frmlen       	bf_state.bfs_frmlen
-#define bf_retries      	bf_state.bfs_retries
-#define bf_seqno        	bf_state.bfs_seqno
-#define bf_tidno        	bf_state.bfs_tidno
-#define bf_keyix                bf_state.bfs_keyix
-#define bf_keytype      	bf_state.bfs_keytype
+#define bf_nframes		bf_state.bfs_nframes
+#define bf_al			bf_state.bfs_al
+#define bf_frmlen		bf_state.bfs_frmlen
+#define bf_retries		bf_state.bfs_retries
+#define bf_seqno		bf_state.bfs_seqno
+#define bf_tidno		bf_state.bfs_tidno
+#define bf_keyix		bf_state.bfs_keyix
+#define bf_keytype		bf_state.bfs_keytype
 #define bf_isht(bf)		(bf->bf_state.bf_type & BUF_HT)
 #define bf_isampdu(bf)		(bf->bf_state.bf_type & BUF_AMPDU)
 #define bf_isaggr(bf)		(bf->bf_state.bf_type & BUF_AGGR)
@@ -291,11 +291,11 @@ struct ath_vif {
  * number of BSSIDs) if a given beacon does not go out even after waiting this
  * number of beacon intervals, the game's up.
  */
-#define BSTUCK_THRESH           	(9 * ATH_BCBUF)
-#define	ATH_BCBUF               	4
-#define ATH_DEFAULT_BINTVAL     	100 /* TU */
-#define ATH_DEFAULT_BMISS_LIMIT 	10
-#define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
+#define BSTUCK_THRESH			(9 * ATH_BCBUF)
+#define	ATH_BCBUF			4
+#define ATH_DEFAULT_BINTVAL		100 /* TU */
+#define ATH_DEFAULT_BMISS_LIMIT		10
+#define IEEE80211_MS_TO_TU(x)		(((x) * 1000) / 1024)
 
 struct ath_beacon_config {
 	u16 beacon_interval;
@@ -377,7 +377,7 @@ void ath9k_btcoex_timer_pause(struct ath_softc *sc);
 /*   LED Control    */
 /********************/
 
-#define ATH_LED_PIN_DEF 		1
+#define ATH_LED_PIN_DEF			1
 #define ATH_LED_PIN_9287		8
 #define ATH_LED_ON_DURATION_IDLE	350	/* in msecs */
 #define ATH_LED_OFF_DURATION_IDLE	250	/* in msecs */
drivers/net/wireless/ath/ath9k/beacon.c +5 -4
index b4a31a4..07aa66d 100644
@@ -492,7 +492,8 @@ void ath_beacon_tasklet(unsigned long data)
 		 */
 		if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
 			ath_print(common, ATH_DBG_FATAL,
-				"beacon queue %u did not stop?\n", sc->beacon.beaconq);
+				"beacon queue %u did not stop?\n",
+				sc->beacon.beaconq);
 		}
 
 		/* NB: cabq traffic should already be queued and primed */
@@ -699,9 +700,9 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 
 	nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
 	if (nexttbtt == 0)
-                nexttbtt = intval;
-        else if (intval)
-                nexttbtt = roundup(nexttbtt, intval);
+		nexttbtt = intval;
+	else if (intval)
+		nexttbtt = roundup(nexttbtt, intval);
 
 	tsf = ath9k_hw_gettsf64(sc->sc_ah);
 	tsftu = TSF_TO_TU((u32)(tsf>>32), (u32)tsf) + FUDGE;
drivers/net/wireless/ath/ath9k/btcoex.h +3 -3
index 1ee5a15..57ef25e 100644
@@ -44,9 +44,9 @@ struct ath_btcoex_hw {
 	u8 wlanactive_gpio;
 	u8 btactive_gpio;
 	u8 btpriority_gpio;
-	u32 bt_coex_mode; 	/* Register setting for AR_BT_COEX_MODE */
-	u32 bt_coex_weights; 	/* Register setting for AR_BT_COEX_WEIGHT */
-	u32 bt_coex_mode2; 	/* Register setting for AR_BT_COEX_MODE2 */
+	u32 bt_coex_mode;	/* Register setting for AR_BT_COEX_MODE */
+	u32 bt_coex_weights;	/* Register setting for AR_BT_COEX_WEIGHT */
+	u32 bt_coex_mode2;	/* Register setting for AR_BT_COEX_MODE2 */
 };
 
 bool ath9k_hw_btcoex_supported(struct ath_hw *ah);
drivers/net/wireless/ath/ath9k/calib.c +9 -9
index 238a574..eedfb4f 100644
@@ -727,9 +727,8 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah)
 		ah->nfCalHist[i].privNF = noise_floor;
 		ah->nfCalHist[i].invalidNFcount =
 			AR_PHY_CCA_FILTERWINDOW_LENGTH;
-		for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
+		for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++)
 			ah->nfCalHist[i].nfCalBuffer[j] = noise_floor;
-		}
 	}
 }
 
@@ -817,7 +816,7 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 {
 	u32 regVal;
 	unsigned int i;
-	u32 regList [][2] = {
+	u32 regList[][2] = {
 		{ 0x786c, 0 },
 		{ 0x7854, 0 },
 		{ 0x7820, 0 },
@@ -855,16 +854,16 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 	/* 7820,b25,1, pdpadrv1=0 */
 	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
 	/* 7820,b24,0, pdpadrv2=0 */
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G1,AR9285_AN_RF2G1_PDPADRV2,0);
+	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
 	/* 7820,b23,0, pdpaout=0 */
 	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
 	/* 783c,b14-16,7, padrvgn2tab_0=7 */
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G8,AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
+	REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
 	/*
 	 * 7838,b29-31,0, padrvgn1tab_0=0
 	 * does not matter since we turn it off
 	 */
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G7,AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
+	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
 
 	REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
 
@@ -882,14 +881,14 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 		regVal |= (1 << (20 + i));
 		REG_WRITE(ah, 0x7834, regVal);
 		udelay(1);
-		//regVal = REG_READ(ah, 0x7834);
+		/* regVal = REG_READ(ah, 0x7834); */
 		regVal &= (~(0x1 << (20 + i)));
 		regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
 			    << (20 + i));
 		REG_WRITE(ah, 0x7834, regVal);
 	}
 
-	regVal = (regVal >>20) & 0x7f;
+	regVal = (regVal >> 20) & 0x7f;
 
 	/* Update PA cal info */
 	if ((!is_reset) && (ah->pacal_info.prev_offset == regVal)) {
@@ -1143,7 +1142,8 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 			  AR_PHY_AGC_CONTROL_CAL);
 
 		/* Poll for offset calibration complete */
-		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
+		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
+				   AR_PHY_AGC_CONTROL_CAL,
 				   0, AH_WAIT_TIMEOUT)) {
 			ath_print(common, ATH_DBG_CALIBRATE,
 				  "offset calibration failed to "
drivers/net/wireless/ath/ath9k/calib.h +5 -5
index b2c873e..df0a268 100644
@@ -31,12 +31,12 @@ extern const struct ath9k_percal_data adc_init_dc_cal;
 #define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE	-112
 #define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE	-118
 #define AR_PHY_CCA_MAX_AR9287_GOOD_VALUE	-118
-#define AR_PHY_CCA_MAX_HIGH_VALUE      		-62
-#define AR_PHY_CCA_MIN_BAD_VALUE       		-140
-#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT     3
-#define AR_PHY_CCA_FILTERWINDOW_LENGTH          5
+#define AR_PHY_CCA_MAX_HIGH_VALUE		-62
+#define AR_PHY_CCA_MIN_BAD_VALUE		-140
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT	3
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH		5
 
-#define NUM_NF_READINGS       6
+#define NUM_NF_READINGS	      6
 #define ATH9K_NF_CAL_HIST_MAX 5
 
 struct ar5416IniArray {
drivers/net/wireless/ath/ath9k/common.c +9 -11
index 4d775ae..db2ab27 100644
@@ -45,11 +45,11 @@ static bool ath9k_rx_accept(struct ath_common *common,
 
 	if (!rx_stats->rs_datalen)
 		return false;
-        /*
-         * rs_status follows rs_datalen so if rs_datalen is too large
-         * we can take a hint that hardware corrupted it, so ignore
-         * those frames.
-         */
+	/*
+	 * rs_status follows rs_datalen so if rs_datalen is too large
+	 * we can take a hint that hardware corrupted it, so ignore
+	 * those frames.
+	 */
 	if (rx_stats->rs_datalen > common->rx_bufsize)
 		return false;
 
@@ -140,7 +140,7 @@ static u8 ath9k_process_rate(struct ath_common *common,
 	if ((common->debug_mask & ATH_DBG_XMIT))
 		print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
 
-        return 0;
+	return 0;
 }
 
 static void ath9k_process_rssi(struct ath_common *common,
@@ -248,7 +248,7 @@ void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
 	 * not try to remove padding from short control frames that do
 	 * not have payload. */
 	padsize = padpos & 3;
-	if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
+	if (padsize && skb->len >= padpos+padsize+FCS_LEN) {
 		memmove(skb->data + padsize, skb->data, padpos);
 		skb_pull(skb, padsize);
 	}
@@ -275,12 +275,10 @@ EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
 int ath9k_cmn_padpos(__le16 frame_control)
 {
 	int padpos = 24;
-	if (ieee80211_has_a4(frame_control)) {
+	if (ieee80211_has_a4(frame_control))
 		padpos += ETH_ALEN;
-	}
-	if (ieee80211_is_data_qos(frame_control)) {
+	if (ieee80211_is_data_qos(frame_control))
 		padpos += IEEE80211_QOS_CTL_LEN;
-	}
 
 	return padpos;
 }
drivers/net/wireless/ath/ath9k/common.h +10 -10
index 042999c..30d0576 100644
@@ -34,19 +34,19 @@
 #define WME_AC_VO   3
 #define WME_NUM_AC  4
 
-#define ATH_RSSI_DUMMY_MARKER   0x127
-#define ATH_RSSI_LPF_LEN 		10
-#define RSSI_LPF_THRESHOLD		-20
-#define ATH_RSSI_EP_MULTIPLIER     (1<<7)
-#define ATH_EP_MUL(x, mul)         ((x) * (mul))
-#define ATH_RSSI_IN(x)             (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_RSSI_DUMMY_MARKER	0x127
+#define ATH_RSSI_LPF_LEN	10
+#define RSSI_LPF_THRESHOLD	-20
+#define ATH_RSSI_EP_MULTIPLIER	(1<<7)
+#define ATH_EP_MUL(x, mul)	((x) * (mul))
+#define ATH_RSSI_IN(x)		(ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
 #define ATH_LPF_RSSI(x, y, len) \
     ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
-#define ATH_RSSI_LPF(x, y) do {                     			\
-    if ((y) >= RSSI_LPF_THRESHOLD)                         		\
-	x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN);  	\
+#define ATH_RSSI_LPF(x, y) do {						\
+    if ((y) >= RSSI_LPF_THRESHOLD)					\
+	x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN);	\
 } while (0)
-#define ATH_EP_RND(x, mul) 						\
+#define ATH_EP_RND(x, mul)						\
 	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
 
 struct ath_atx_ac {
drivers/net/wireless/ath/ath9k/debug.c +6 -6
index 081e008..344ffc8 100644
@@ -157,10 +157,10 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 		"txfifo_dcu_num_0:   %2d    txfifo_dcu_num_1:       %2d\n",
 		(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
 
-	len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x \n",
+	len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x\n",
 			REG_READ_D(ah, AR_OBS_BUS_1));
 	len += snprintf(buf + len, DMA_BUF_LEN - len,
-			"AR_CR: 0x%x \n", REG_READ_D(ah, AR_CR));
+			"AR_CR: 0x%x\n", REG_READ_D(ah, AR_CR));
 
 	ath9k_ps_restore(sc);
 
@@ -356,7 +356,7 @@ static const struct file_operations fops_rcstat = {
 	.owner = THIS_MODULE
 };
 
-static const char * ath_wiphy_state_str(enum ath_wiphy_state state)
+static const char *ath_wiphy_state_str(enum ath_wiphy_state state)
 {
 	switch (state) {
 	case ATH_WIPHY_INACTIVE:
@@ -410,7 +410,7 @@ static ssize_t read_file_wiphy(struct file *file, char __user *user_buf,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
 
-static struct ath_wiphy * get_wiphy(struct ath_softc *sc, const char *name)
+static struct ath_wiphy *get_wiphy(struct ath_softc *sc, const char *name)
 {
 	int i;
 	if (strcmp(name, wiphy_name(sc->pri_wiphy->hw->wiphy)) == 0)
@@ -457,7 +457,7 @@ static int select_wiphy(struct ath_softc *sc, const char *name)
 
 static int schedule_wiphy(struct ath_softc *sc, const char *msec)
 {
-	ath9k_wiphy_set_scheduler(sc, simple_strtoul(msec, NULL, 0));
+	ath9k_wiphy_set_scheduler(sc, strict_strtoul(msec, NULL, 0));
 	return 0;
 }
 
@@ -520,7 +520,7 @@ static const struct file_operations fops_wiphy = {
 		sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_BK]].elem, \
 		sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VI]].elem, \
 		sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VO]].elem); \
-} while(0)
+} while (0)
 
 static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
 			      size_t count, loff_t *ppos)
drivers/net/wireless/ath/ath9k/eeprom.c +3 -3
index dacaae9..cfba297 100644
@@ -108,7 +108,7 @@ void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
 			k = pVpdList[idxL];
 		else
 			k = (u16)(((currPwr - pPwrList[idxL]) * pVpdList[idxR] +
-				   (pPwrList[idxR] - currPwr) * pVpdList[idxL]) /
+				  (pPwrList[idxR] - currPwr) * pVpdList[idxL]) /
 				  (pPwrList[idxR] - pPwrList[idxL]));
 		pRetVpdList[i] = (u8) k;
 		currPwr += 2;
@@ -136,7 +136,7 @@ void ath9k_hw_get_legacy_target_powers(struct ath_hw *ah,
 		matchIndex = 0;
 	} else {
 		for (i = 0; (i < numChannels) &&
-			     (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			    (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
 			if (freq == ath9k_hw_fbin2freq(powInfo[i].bChannel,
 						       IS_CHAN_2GHZ(chan))) {
 				matchIndex = i;
@@ -190,7 +190,7 @@ void ath9k_hw_get_target_powers(struct ath_hw *ah,
 		matchIndex = 0;
 	} else {
 		for (i = 0; (i < numChannels) &&
-			     (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			    (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
 			if (freq == ath9k_hw_fbin2freq(powInfo[i].bChannel,
 						       IS_CHAN_2GHZ(chan))) {
 				matchIndex = i;
drivers/net/wireless/ath/ath9k/eeprom.h +2 -2
index 2f2993b..a0f071b 100644
@@ -194,8 +194,8 @@
 #define AR9287_NUM_2G_CCK_TARGET_POWERS 3
 #define AR9287_NUM_2G_20_TARGET_POWERS  3
 #define AR9287_NUM_2G_40_TARGET_POWERS  3
-#define AR9287_NUM_CTLS              	12
-#define AR9287_NUM_BAND_EDGES        	4
+#define AR9287_NUM_CTLS			12
+#define AR9287_NUM_BAND_EDGES		4
 #define AR9287_NUM_PD_GAINS             4
 #define AR9287_PD_GAINS_IN_MASK         4
 #define AR9287_PD_GAIN_ICEPTS           1
drivers/net/wireless/ath/ath9k/eeprom_4k.c +9 -8
index 68db166..89ee3c2 100644
@@ -43,7 +43,7 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
 		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc, eep_data)) {
 			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region \n");
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -508,7 +508,7 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 						 u16 powerLimit)
 {
 #define CMP_TEST_GRP \
-	(((cfgCtl & ~CTL_MODE_M)| (pCtlMode[ctlMode] & CTL_MODE_M)) ==	\
+	(((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) ==	\
 	 pEepData->ctlIndex[i])						\
 	|| (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == \
 	    ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))
@@ -523,8 +523,9 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 	struct chan_centers centers;
 	struct cal_ctl_data_4k *rep;
 	struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
-	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+	static const u16 tpScaleReductionTable[5] = {
+		0, 3, 6, 9, AR5416_MAX_RATE_POWER
+	};
 	struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
 		0, { 0, 0, 0, 0}
 	};
@@ -535,10 +536,10 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 	struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
 		0, {0, 0, 0, 0}
 	};
-	u16 ctlModesFor11g[] =
-		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
-		  CTL_2GHT40
-		};
+	u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+		CTL_2GHT40
+	};
 
 	ath9k_hw_get_channel_centers(ah, chan, &centers);
 
drivers/net/wireless/ath/ath9k/eeprom_9287.c +8 -6
index 839d05a..4302d18 100644
@@ -44,7 +44,7 @@ static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
 		if (!ath9k_hw_nvram_read(common,
 					 addr + eep_start_loc, eep_data)) {
 			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region \n");
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -606,8 +606,9 @@ static void ath9k_hw_set_AR9287_power_per_rate_table(struct ath_hw *ah,
 #define REDUCE_SCALED_POWER_BY_THREE_CHAIN   10
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
-	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+	static const u16 tpScaleReductionTable[5] = {
+		0, 3, 6, 9, AR5416_MAX_RATE_POWER
+	};
 	int i;
 	int16_t  twiceLargestAntenna;
 	struct cal_ctl_data_ar9287 *rep;
@@ -618,9 +619,10 @@ static void ath9k_hw_set_AR9287_power_per_rate_table(struct ath_hw *ah,
 	struct cal_target_power_ht  targetPowerHt20,
 				    targetPowerHt40 = {0, {0, 0, 0, 0} };
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 ctlModesFor11g[] =
-		{CTL_11B, CTL_11G, CTL_2GHT20,
-		 CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40};
+	u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20,
+		CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40
+	};
 	u16 numCtlModes = 0, *pCtlMode = NULL, ctlMode, freq;
 	struct chan_centers centers;
 	int tx_chainmask;
drivers/net/wireless/ath/ath9k/eeprom_def.c +14 -15
index 404a034..03f86f1 100644
@@ -326,7 +326,7 @@ static void ath9k_hw_def_set_gain(struct ath_hw *ah,
 			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
 			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
 			   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
-			  | SM(pModal-> bswMargin[i],
+			  | SM(pModal->bswMargin[i],
 			       AR_PHY_GAIN_2GHZ_BSW_MARGIN));
 			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
 			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
@@ -713,9 +713,8 @@ static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
 		maxIndex = (tgtIndex < sizeCurrVpdTable) ?
 			tgtIndex : sizeCurrVpdTable;
 
-		while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+		while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1)))
 			pPDADCValues[k++] = vpdTableI[i][ss++];
-		}
 
 		vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
 				    vpdTableI[i][sizeCurrVpdTable - 2]);
@@ -803,14 +802,12 @@ static void ath9k_adjust_pdadc_values(struct ath_hw *ah,
 	if (AR_SREV_9280_20_OR_LATER(ah)) {
 		if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
 			/* shift the table to start@the new offset */
-			for (k = 0; k < (u16)NUM_PDADC(diff); k++ ) {
+			for (k = 0; k < (u16)NUM_PDADC(diff); k++)
 				pdadcValues[k] = pdadcValues[k + diff];
-			}
 
 			/* fill the back of the table */
-			for (k = (u16)NUM_PDADC(diff); k < NUM_PDADC(0); k++) {
+			for (k = (u16)NUM_PDADC(diff); k < NUM_PDADC(0); k++)
 				pdadcValues[k] = pdadcValues[NUM_PDADC(diff)];
-			}
 		}
 	}
 #undef NUM_PDADC
@@ -1000,8 +997,9 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
 	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
-	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+	static const u16 tpScaleReductionTable[5] = {
+		0, 3, 6, 9, AR5416_MAX_RATE_POWER
+	};
 
 	int i;
 	int16_t twiceLargestAntenna;
@@ -1017,12 +1015,13 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 		0, {0, 0, 0, 0}
 	};
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 ctlModesFor11a[] =
-		{ CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
-	u16 ctlModesFor11g[] =
-		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+	u16 ctlModesFor11a[] = {
+		CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
+	};
+	u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
 		  CTL_2GHT40
-		};
+	};
 	u16 numCtlModes, *pCtlMode, ctlMode, freq;
 	struct chan_centers centers;
 	int tx_chainmask;
@@ -1397,7 +1396,7 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 	else
 		regulatory->max_power_level = ratesArray[i];
 
-	switch(ar5416_get_ntxchains(ah->txchainmask)) {
+	switch (ar5416_get_ntxchains(ah->txchainmask)) {
 	case 1:
 		break;
 	case 2:
drivers/net/wireless/ath/ath9k/gpio.c +1 -1
index deab8be..c2c3090 100644
@@ -364,7 +364,7 @@ static void ath_btcoex_no_stomp_timer(void *arg)
 	bool is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
 
 	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "no stomp timer running \n");
+		  "no stomp timer running\n");
 
 	spin_lock_bh(&btcoex->btcoex_lock);
 
drivers/net/wireless/ath/ath9k/hw.c +19 -25

134 lines not on this page · raw message

drivers/net/wireless/ath/ath9k/hw.h +8 -8
index dbbf7ca..e41e5db 100644
@@ -214,15 +214,15 @@ struct ath9k_ops_config {
 	u32 enable_ani;
 	int serialize_regmode;
 	bool rx_intr_mitigation;
-#define SPUR_DISABLE        	0
-#define SPUR_ENABLE_IOCTL   	1
-#define SPUR_ENABLE_EEPROM  	2
+#define SPUR_DISABLE		0
+#define SPUR_ENABLE_IOCTL	1
+#define SPUR_ENABLE_EEPROM	2
 #define AR_EEPROM_MODAL_SPURS   5
-#define AR_SPUR_5413_1      	1640
-#define AR_SPUR_5413_2      	1200
-#define AR_NO_SPUR      	0x8000
-#define AR_BASE_FREQ_2GHZ   	2300
-#define AR_BASE_FREQ_5GHZ   	4900
+#define AR_SPUR_5413_1		1640
+#define AR_SPUR_5413_2		1200
+#define AR_NO_SPUR		0x8000
+#define AR_BASE_FREQ_2GHZ	2300
+#define AR_BASE_FREQ_5GHZ	4900
 #define AR_SPUR_FEEQ_BOUND_HT40 19
 #define AR_SPUR_FEEQ_BOUND_HT20 10
 	int spurmode;
drivers/net/wireless/ath/ath9k/init.c +2 -2
index 3d4d897..660a06c 100644
@@ -106,7 +106,7 @@ static struct ieee80211_channel ath9k_5ghz_chantable[] = {
 
 /* Atheros hardware rate code addition for short premble */
 #define SHPCHECK(__hw_rate, __flags) \
-	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04) : 0)
 
 #define RATE(_bitrate, _hw_rate, _flags) {              \
 	.bitrate        = (_bitrate),                   \
@@ -747,7 +747,7 @@ static void ath9k_deinit_softc(struct ath_softc *sc)
 {
 	int i = 0;
 
-        if ((sc->btcoex.no_stomp_timer) &&
+	if ((sc->btcoex.no_stomp_timer) &&
 	    sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 		ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
 
drivers/net/wireless/ath/ath9k/mac.h +1 -1
index 29851e6..e93afc2 100644
@@ -241,7 +241,7 @@ struct ath_desc {
 #define ATH9K_TXDESC_EXT_ONLY		0x0040
 #define ATH9K_TXDESC_EXT_AND_CTL	0x0080
 #define ATH9K_TXDESC_VMF		0x0100
-#define ATH9K_TXDESC_FRAG_IS_ON 	0x0200
+#define ATH9K_TXDESC_FRAG_IS_ON		0x0200
 #define ATH9K_TXDESC_CAB		0x0400
 
 #define ATH9K_RXDESC_INTREQ		0x0020
drivers/net/wireless/ath/ath9k/main.c +24 -24

76 lines not on this page · raw message

drivers/net/wireless/ath/ath9k/phy.c +5 -7
index 2547b3c..4907d0f 100644
@@ -118,20 +118,19 @@ int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 					  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
 			} else {
 				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-					  txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN);
+					  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
 			}
 		}
 	} else {
 		bMode = 0;
 		fracMode = 0;
 
-		switch(ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
+		switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
 		case 0:
-			if ((freq % 20) == 0) {
+			if ((freq % 20) == 0)
 				aModeRefSel = 3;
-			} else if ((freq % 10) == 0) {
+			else if ((freq % 10) == 0)
 				aModeRefSel = 2;
-			}
 			if (aModeRefSel)
 				break;
 		case 1:
@@ -502,9 +501,8 @@ static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 	int reg_writes = 0;
 	u32 new_bias = 0;
 
-	if (!AR_SREV_5416(ah) || synth_freq >= 3000) {
+	if (!AR_SREV_5416(ah) || synth_freq >= 3000)
 		return;
-	}
 
 	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
 
drivers/net/wireless/ath/ath9k/phy.h +2 -2
index 0999a49..5c0d9bc 100644
@@ -56,7 +56,7 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 #define AR_PHY_FC_SINGLE_HT_LTF1    0x00000200
 #define AR_PHY_FC_ENABLE_DAC_FIFO   0x00000800
 
-#define AR_PHY_TEST2 		    0x9808
+#define AR_PHY_TEST2		 0x9808
 
 #define AR_PHY_TIMING2           0x9810
 #define AR_PHY_TIMING3           0x9814
@@ -577,7 +577,7 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 #define AR_PHY_POWER_TX_RATE8   0xA3D0
 #define AR_PHY_POWER_TX_RATE9   0xA3D4
 
-#define AR_PHY_XPA_CFG  	0xA3D8
+#define AR_PHY_XPA_CFG		0xA3D8
 #define AR_PHY_FORCE_XPA_CFG	0x000000001
 #define AR_PHY_FORCE_XPA_CFG_S	0
 
drivers/net/wireless/ath/ath9k/rc.c +6 -7
index 244e1c6..0b8460d 100644
@@ -508,7 +508,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 
 /* Finds the highest rate index we can use */
 static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
-			         struct ath_rate_priv *ath_rc_priv,
+				 struct ath_rate_priv *ath_rc_priv,
 				 const struct ath_rate_table *rate_table,
 				 int *is_probing)
 {
@@ -1075,7 +1075,7 @@ struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
 	int mode = 0;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
-	switch(band) {
+	switch (band) {
 	case IEEE80211_BAND_2GHZ:
 		mode = ATH9K_MODE_11G;
 		if (is_ht)
@@ -1120,9 +1120,8 @@ static void ath_rc_init(struct ath_softc *sc,
 	ath_rc_priv->rate_table_size = RATE_TABLE_SIZE;
 
 	/* Initialize thresholds according to the global rate table */
-	for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
+	for (i = 0 ; i < ath_rc_priv->rate_table_size; i++)
 		ath_rc_priv->per[i] = 0;
-	}
 
 	/* Determine the valid rates */
 	ath_rc_init_valid_txmask(ath_rc_priv);
@@ -1268,7 +1267,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 			tid = qc[0] & 0xf;
 			an = (struct ath_node *)sta->drv_priv;
 
-			if(ath_tx_aggr_check(sc, an, tid))
+			if (ath_tx_aggr_check(sc, an, tid))
 				ieee80211_start_tx_ba_session(sta, tid);
 		}
 	}
@@ -1278,7 +1277,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 }
 
 static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
-                          struct ieee80211_sta *sta, void *priv_sta)
+			  struct ieee80211_sta *sta, void *priv_sta)
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
@@ -1314,7 +1313,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
 		rate_table = ath_choose_rate_table(sc, sband->band,
-		                      sta->ht_cap.ht_supported, is_cw40);
+				      sta->ht_cap.ht_supported, is_cw40);
 	} else {
 		rate_table = hw_rate_table[sc->cur_rate_mode];
 	}
drivers/net/wireless/ath/ath9k/rc.h +2 -2
index 4f6d6fd..99ce3a7 100644
@@ -92,14 +92,14 @@ enum {
  * struct ath_rate_table - Rate Control table
  * @valid: valid for use in rate control
  * @valid_single_stream: valid for use in rate control for
- * 	single stream operation
+ *	single stream operation
  * @phy: CCK/OFDM
  * @ratekbps: rate in Kbits per second
  * @user_ratekbps: user rate in Kbits per second
  * @ratecode: rate that goes into HW descriptors
  * @short_preamble: Mask for enabling short preamble in ratecode for CCK
  * @dot11rate: value that goes into supported
- * 	rates info element of MLME
+ *	rates info element of MLME
  * @ctrl_rate: Index of next lower basic rate, used for duration computation
  * @max_4ms_framelen: maximum frame length(bytes) for tx duration
  * @probe_interval: interval for rate control to probe for other rates
drivers/net/wireless/ath/ath9k/recv.c +2 -3
index 1ca42e5..3e1e9f4 100644
@@ -16,7 +16,7 @@
 
 #include "ath9k.h"
 
-static struct ieee80211_hw * ath_get_virt_hw(struct ath_softc *sc,
+static struct ieee80211_hw *ath_get_virt_hw(struct ath_softc *sc,
 					     struct ieee80211_hdr *hdr)
 {
 	struct ieee80211_hw *hw = sc->pri_wiphy->hw;
@@ -547,9 +547,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			tds = tbf->bf_desc;
 			retval = ath9k_hw_rxprocdesc(ah, tds, tbf->bf_daddr,
 					     PA2DESC(sc, tds->ds_link), 0);
-			if (retval == -EINPROGRESS) {
+			if (retval == -EINPROGRESS)
 				break;
-			}
 		}
 
 		skb = bf->bf_mpdu;
drivers/net/wireless/ath/ath9k/reg.h +24 -24

72 lines not on this page · raw message

drivers/net/wireless/ath/ath9k/virtual.c +1 -2
index 00c0e21..ed70079 100644
@@ -508,8 +508,7 @@ int ath9k_wiphy_select(struct ath_wiphy *aphy)
 		if (sc->wiphy_select_failures == 0)
 			sc->wiphy_select_first_fail = jiffies;
 		sc->wiphy_select_failures++;
-		if (time_after(jiffies, sc->wiphy_select_first_fail + HZ / 2))
-		{
+		if (time_after(jiffies, sc->wiphy_select_first_fail + HZ / 2)) {
 			printk(KERN_DEBUG "ath9k: Previous wiphy select timed "
 			       "out; disable/enable hw to recover\n");
 			__ath9k_wiphy_mark_all_paused(sc);
drivers/net/wireless/ath/ath9k/xmit.c +5 -6
index 294b486..d987440 100644
@@ -31,7 +31,7 @@
 #define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2)
 #define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18)
 
-#define OFDM_SIFS_TIME    	    16
+#define OFDM_SIFS_TIME		16
 
 static u32 bits_per_symbol[][2] = {
 	/* 20MHz 40MHz */
@@ -259,7 +259,7 @@ static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq,
 	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY);
 }
 
-static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
+static struct ath_buf *ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
 {
 	struct ath_buf *tbf;
 
@@ -1587,9 +1587,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 	/* Remove the padding size from bf_frmlen, if any */
 	padpos = ath9k_cmn_padpos(hdr->frame_control);
 	padsize = padpos & 3;
-	if (padsize && skb->len>padpos+padsize) {
+	if (padsize && skb->len > padpos+padsize)
 		bf->bf_frmlen -= padsize;
-	}
 
 	if (conf_is_ht(&hw->conf))
 		bf->bf_state.bf_type |= BUF_HT;
@@ -1771,7 +1770,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
 	/* Add the padding after the header if this is not already done */
 	padpos = ath9k_cmn_padpos(hdr->frame_control);
 	padsize = padpos & 3;
-	if (padsize && skb->len>padpos) {
+	if (padsize && skb->len > padpos) {
 		if (skb_headroom(skb) < padsize) {
 			ath_print(common, ATH_DBG_XMIT,
 				  "TX CABQ padding failed\n");
@@ -1825,7 +1824,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 
 	padpos = ath9k_cmn_padpos(hdr->frame_control);
 	padsize = padpos & 3;
-	if (padsize && skb->len>padpos+padsize) {
+	if (padsize && skb->len > padpos+padsize) {
 		/*
 		 * Remove MAC header padding before giving the frame back to
 		 * mac80211.
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 wireless: ath9k: Fix most coding style issues in ath9k This patch fixed up almost all coding style issues in the ath9k driver found by the ceckpatch.pl tool. Signed-off-by: Michael Sprecher <[email protected]>

drivers/net/wireless/ath/ath9k/xmit.c static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, · line 1827

Quoted 2 lines · Michael Sprecher
drivers/net/wireless/ath/ath9k/xmit.c +1 -1
-	if (padsize && skb->len>padpos+padsize) {
+	if (padsize && skb->len > padpos+padsize) {

There should be spaces around the plus. I didn't check the whole patch, but I guess you should recheck it.

Besides, the description (after the first line) and the Signed-off-by should be in the body of the message, not in the subject.

Signature · 2 lines
Regards,
Pavel Roskin