Skip to contentSkip to conversation

Block patches

GIT PULL New Kevin Wolf 1 participant 12 messages May 7, 2010 Block layer

lore
Share & tools
lore

Kevin Wolf

author
#0 lore raw

The following changes since commit 2065061ede22d401aae2ce995c3af54db9d28639:
Igor V. Kovalenko (1):
sparc64: handle asi referencing nucleus and secondary MMU contexts

are available in the git repository at:

git://repo.or.cz/qemu/kevin.git for-anthony

Christoph Hellwig (4):
cloop: use pread
cloop: use qemu block API
bochs: use pread
bochs: use qemu block API

Kevin Wolf (4):
ide: Fix ide_dma_cancel
block: Avoid unchecked casts for AIOCBs
block: Fix protocol detection for Windows devices
block: Fix bdrv_commit

Ryota Ozaki (1):
qemu-nbd: Improve error reporting

Stefan Hajnoczi (1):
block: Remove semicolon in BDRV_SECTOR_MASK macro

Stefan Weil (1):
block/vdi: Allow disk images of size 0

 block.c          |   19 +++++++-----
 block.h          |    2 +-
 block/blkdebug.c |    4 +-
 block/bochs.c    |   81 +++++++++++++++--------------------------------------
 block/cloop.c    |   48 ++++++++++++++++----------------
 block/qcow.c     |    2 +-
 block/qcow2.c    |    2 +-
 block/vdi.c      |   11 +++++--
 hw/ide/core.c    |    8 ++--
 qemu-nbd.c       |   34 ++++++++++++++++------
 10 files changed, 99 insertions(+), 112 deletions(-)
author
#1 lore raw

PATCH 1/11 block: Remove semicolon in BDRV_SECTOR_MASK macro

From: Stefan Hajnoczi <[email protected]>

---
 block.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
block.h +1 -1
index f87d24e..278259c 100644
@@ -38,7 +38,7 @@ typedef struct QEMUSnapshotInfo {
 
 #define BDRV_SECTOR_BITS   9
 #define BDRV_SECTOR_SIZE   (1 << BDRV_SECTOR_BITS)
-#define BDRV_SECTOR_MASK   ~(BDRV_SECTOR_SIZE - 1);
+#define BDRV_SECTOR_MASK   ~(BDRV_SECTOR_SIZE - 1)
 
 typedef enum {
     BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
Signature · 1 line
1.6.6.1
author
#2 lore raw

PATCH 2/11 qemu-nbd: Improve error reporting

In reply to Kevin Wolf

From: Ryota Ozaki <[email protected]>

- use err(3) instead of errx(3) if errno is available to report why failed
- let fail prior to daemon(3) if opening a nbd file is likely to fail after daemonizing to avoid silent failure exit
- add missing 'ret = 1' when unix_socket_outgoing failed

---
 qemu-nbd.c |   34 ++++++++++++++++++++++++----------
 1 files changed, 24 insertions(+), 10 deletions(-)
qemu-nbd.c +24 -10
index 25aa913..4e607cf 100644
@@ -112,9 +112,12 @@ static int find_partition(BlockDriverState *bs, int partition,
     uint8_t data[512];
     int i;
     int ext_partnum = 4;
+    int ret;
 
-    if (bdrv_read(bs, 0, data, 1))
-        errx(EXIT_FAILURE, "error while reading");
+    if ((ret = bdrv_read(bs, 0, data, 1)) < 0) {
+        errno = -ret;
+        err(EXIT_FAILURE, "error while reading");
+    }
 
     if (data[510] != 0x55 || data[511] != 0xaa) {
         errno = -EINVAL;
@@ -132,8 +135,10 @@ static int find_partition(BlockDriverState *bs, int partition,
             uint8_t data1[512];
             int j;
 
-            if (bdrv_read(bs, mbr[i].start_sector_abs, data1, 1))
-                errx(EXIT_FAILURE, "error while reading");
+            if ((ret = bdrv_read(bs, mbr[i].start_sector_abs, data1, 1)) < 0) {
+                errno = -ret;
+                err(EXIT_FAILURE, "error while reading");
+            }
 
             for (j = 0; j < 4; j++) {
                 read_partition(&data1[446 + 16 * j], &ext[j]);
@@ -316,7 +321,7 @@ int main(int argc, char **argv)
     if (disconnect) {
         fd = open(argv[optind], O_RDWR);
         if (fd == -1)
-            errx(EXIT_FAILURE, "Cannot open %s", argv[optind]);
+            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);
 
         nbd_disconnect(fd);
 
@@ -333,23 +338,30 @@ int main(int argc, char **argv)
     if (bs == NULL)
         return 1;
 
-    if (bdrv_open(bs, argv[optind], flags, NULL) < 0)
-        return 1;
+    if ((ret = bdrv_open(bs, argv[optind], flags, NULL)) < 0) {
+        errno = -ret;
+        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", argv[optind]);
+    }
 
     fd_size = bs->total_sectors * 512;
 
     if (partition != -1 &&
         find_partition(bs, partition, &dev_offset, &fd_size))
-        errx(EXIT_FAILURE, "Could not find partition %d", partition);
+        err(EXIT_FAILURE, "Could not find partition %d", partition);
 
     if (device) {
         pid_t pid;
         int sock;
 
+        /* want to fail before daemonizing */
+        if (access(device, R_OK|W_OK) == -1) {
+            err(EXIT_FAILURE, "Could not access '%s'", device);
+        }
+
         if (!verbose) {
             /* detach client and server */
             if (daemon(0, 0) == -1) {
-                errx(EXIT_FAILURE, "Failed to daemonize");
+                err(EXIT_FAILURE, "Failed to daemonize");
             }
         }
 
@@ -372,8 +384,10 @@ int main(int argc, char **argv)
             do {
                 sock = unix_socket_outgoing(socket);
                 if (sock == -1) {
-                    if (errno != ENOENT && errno != ECONNREFUSED)
+                    if (errno != ENOENT && errno != ECONNREFUSED) {
+                        ret = 1;
                         goto out;
+                    }
                     sleep(1);	/* wait children */
                 }
             } while (sock == -1);
Signature · 1 line
1.6.6.1
author
#3 lore raw

PATCH 3/11 cloop: use pread

In reply to Kevin Wolf

From: Christoph Hellwig <[email protected]>

Use pread instead of lseek + read in preparation of using the qemu block API.

---
 block/cloop.c |   32 +++++++++++++++++---------------
 1 files changed, 17 insertions(+), 15 deletions(-)
block/cloop.c +17 -15
index e4f995b..9fe2a42 100644
@@ -62,23 +62,22 @@ static int cloop_open(BlockDriverState *bs, const char *filename, int flags)
     bs->read_only = 1;
 
     /* read header */
-    if(lseek(s->fd,128,SEEK_SET)<0) {
-cloop_close:
-	close(s->fd);
-	return -1;
+    if (pread(s->fd, &s->block_size, 4, 128) < 4) {
+        goto cloop_close;
     }
-    if(read(s->fd,&s->block_size,4)<4)
-	goto cloop_close;
-    s->block_size=be32_to_cpu(s->block_size);
-    if(read(s->fd,&s->n_blocks,4)<4)
-	goto cloop_close;
-    s->n_blocks=be32_to_cpu(s->n_blocks);
+    s->block_size = be32_to_cpu(s->block_size);
+
+    if (pread(s->fd, &s->n_blocks, 4, 128 + 4) < 4) {
+        goto cloop_close;
+    }
+    s->n_blocks = be32_to_cpu(s->n_blocks);
 
     /* read offsets */
-    offsets_size=s->n_blocks*sizeof(uint64_t);
-    s->offsets=(uint64_t*)qemu_malloc(offsets_size);
-    if(read(s->fd,s->offsets,offsets_size)<offsets_size)
+    offsets_size = s->n_blocks * sizeof(uint64_t);
+    s->offsets = qemu_malloc(offsets_size);
+    if (pread(s->fd, s->offsets, offsets_size, 128 + 4 + 4) < offsets_size) {
 	goto cloop_close;
+    }
     for(i=0;i<s->n_blocks;i++) {
 	s->offsets[i]=be64_to_cpu(s->offsets[i]);
 	if(i>0) {
@@ -98,6 +97,10 @@ cloop_close:
     s->sectors_per_block = s->block_size/512;
     bs->total_sectors = s->n_blocks*s->sectors_per_block;
     return 0;
+
+cloop_close:
+    close(s->fd);
+    return -1;
 }
 
 static inline int cloop_read_block(BDRVCloopState *s,int block_num)
@@ -106,8 +109,7 @@ static inline int cloop_read_block(BDRVCloopState *s,int block_num)
 	int ret;
         uint32_t bytes = s->offsets[block_num+1]-s->offsets[block_num];
 
-	lseek(s->fd, s->offsets[block_num], SEEK_SET);
-        ret = read(s->fd, s->compressed_block, bytes);
+        ret = pread(s->fd, s->compressed_block, bytes, s->offsets[block_num]);
         if (ret != bytes)
             return -1;
 
Signature · 1 line
1.6.6.1
author
#4 lore raw

PATCH 4/11 cloop: use qemu block API

In reply to Kevin Wolf

From: Christoph Hellwig <[email protected]>

Use bdrv_pwrite to access the backing device instead of pread, and convert the driver to implementing the bdrv_open method which gives it an already opened BlockDriverState for the underlying device.

---
 block/cloop.c |   26 ++++++++++++--------------
 1 files changed, 12 insertions(+), 14 deletions(-)
block/cloop.c +12 -14
index 9fe2a42..fe015c4 100644
@@ -27,7 +27,6 @@
 #include <zlib.h>
 
 typedef struct BDRVCloopState {
-    int fd;
     uint32_t block_size;
     uint32_t n_blocks;
     uint64_t* offsets;
@@ -51,23 +50,20 @@ static int cloop_probe(const uint8_t *buf, int buf_size, const char *filename)
     return 0;
 }
 
-static int cloop_open(BlockDriverState *bs, const char *filename, int flags)
+static int cloop_open(BlockDriverState *bs, int flags)
 {
     BDRVCloopState *s = bs->opaque;
     uint32_t offsets_size,max_compressed_block_size=1,i;
 
-    s->fd = open(filename, O_RDONLY | O_BINARY);
-    if (s->fd < 0)
-        return -errno;
     bs->read_only = 1;
 
     /* read header */
-    if (pread(s->fd, &s->block_size, 4, 128) < 4) {
+    if (bdrv_pread(bs->file, 128, &s->block_size, 4) < 4) {
         goto cloop_close;
     }
     s->block_size = be32_to_cpu(s->block_size);
 
-    if (pread(s->fd, &s->n_blocks, 4, 128 + 4) < 4) {
+    if (bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4) < 4) {
         goto cloop_close;
     }
     s->n_blocks = be32_to_cpu(s->n_blocks);
@@ -75,7 +71,8 @@ static int cloop_open(BlockDriverState *bs, const char *filename, int flags)
     /* read offsets */
     offsets_size = s->n_blocks * sizeof(uint64_t);
     s->offsets = qemu_malloc(offsets_size);
-    if (pread(s->fd, s->offsets, offsets_size, 128 + 4 + 4) < offsets_size) {
+    if (bdrv_pread(bs->file, 128 + 4 + 4, s->offsets, offsets_size) <
+            offsets_size) {
 	goto cloop_close;
     }
     for(i=0;i<s->n_blocks;i++) {
@@ -99,17 +96,19 @@ static int cloop_open(BlockDriverState *bs, const char *filename, int flags)
     return 0;
 
 cloop_close:
-    close(s->fd);
     return -1;
 }
 
-static inline int cloop_read_block(BDRVCloopState *s,int block_num)
+static inline int cloop_read_block(BlockDriverState *bs, int block_num)
 {
+    BDRVCloopState *s = bs->opaque;
+
     if(s->current_block != block_num) {
 	int ret;
         uint32_t bytes = s->offsets[block_num+1]-s->offsets[block_num];
 
-        ret = pread(s->fd, s->compressed_block, bytes, s->offsets[block_num]);
+        ret = bdrv_pread(bs->file, s->offsets[block_num], s->compressed_block,
+                         bytes);
         if (ret != bytes)
             return -1;
 
@@ -138,7 +137,7 @@ static int cloop_read(BlockDriverState *bs, int64_t sector_num,
     for(i=0;i<nb_sectors;i++) {
 	uint32_t sector_offset_in_block=((sector_num+i)%s->sectors_per_block),
 	    block_num=(sector_num+i)/s->sectors_per_block;
-	if(cloop_read_block(s, block_num) != 0)
+	if(cloop_read_block(bs, block_num) != 0)
 	    return -1;
 	memcpy(buf+i*512,s->uncompressed_block+sector_offset_in_block*512,512);
     }
@@ -148,7 +147,6 @@ static int cloop_read(BlockDriverState *bs, int64_t sector_num,
 static void cloop_close(BlockDriverState *bs)
 {
     BDRVCloopState *s = bs->opaque;
-    close(s->fd);
     if(s->n_blocks>0)
 	free(s->offsets);
     free(s->compressed_block);
@@ -160,7 +158,7 @@ static BlockDriver bdrv_cloop = {
     .format_name	= "cloop",
     .instance_size	= sizeof(BDRVCloopState),
     .bdrv_probe		= cloop_probe,
-    .bdrv_file_open	= cloop_open,
+    .bdrv_open		= cloop_open,
     .bdrv_read		= cloop_read,
     .bdrv_close		= cloop_close,
 };
Signature · 1 line
1.6.6.1
author
#5 lore raw

PATCH 5/11 ide: Fix ide_dma_cancel

In reply to Kevin Wolf

When cancelling a request, bdrv_aio_cancel may decide that it waits for completion of a request rather than for cancellation. IDE therefore can't abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback of a completed request would use invalid data.

---
 hw/ide/core.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
hw/ide/core.c +4 -4
index 0757528..3cd55e3 100644
@@ -2838,10 +2838,6 @@ static void ide_dma_restart(IDEState *s, int is_read)
 void ide_dma_cancel(BMDMAState *bm)
 {
     if (bm->status & BM_STATUS_DMAING) {
-        bm->status &= ~BM_STATUS_DMAING;
-        /* cancel DMA request */
-        bm->unit = -1;
-        bm->dma_cb = NULL;
         if (bm->aiocb) {
 #ifdef DEBUG_AIO
             printf("aio_cancel\n");
@@ -2849,6 +2845,10 @@ void ide_dma_cancel(BMDMAState *bm)
             bdrv_aio_cancel(bm->aiocb);
             bm->aiocb = NULL;
         }
+        bm->status &= ~BM_STATUS_DMAING;
+        /* cancel DMA request */
+        bm->unit = -1;
+        bm->dma_cb = NULL;
     }
 }
 
Signature · 1 line
1.6.6.1
author
#6 lore raw

PATCH 6/11 bochs: use pread

In reply to Kevin Wolf

From: Christoph Hellwig <[email protected]>

Use pread instead of lseek + read in preparation of using the qemu block API.

---
 block/bochs.c |   63 ++++++++++++++++++--------------------------------------
 1 files changed, 20 insertions(+), 43 deletions(-)
block/bochs.c +20 -43
index e952670..b54f54d 100644
@@ -125,7 +125,7 @@ static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
 
     s->fd = fd;
 
-    if (read(fd, &bochs, sizeof(bochs)) != sizeof(bochs)) {
+    if (pread(fd, &bochs, sizeof(bochs), 0) != sizeof(bochs)) {
         goto fail;
     }
 
@@ -144,14 +144,10 @@ static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
       bs->total_sectors = le64_to_cpu(bochs.extra.redolog.disk) / 512;
     }
 
-    if (lseek(s->fd, le32_to_cpu(bochs.header), SEEK_SET) == (off_t)-1) {
-        goto fail;
-    }
-
     s->catalog_size = le32_to_cpu(bochs.extra.redolog.catalog);
     s->catalog_bitmap = qemu_malloc(s->catalog_size * 4);
-    if (read(s->fd, s->catalog_bitmap, s->catalog_size * 4) !=
-	s->catalog_size * 4)
+    if (pread(s->fd, s->catalog_bitmap, s->catalog_size * 4,
+              le32_to_cpu(bochs.header)) != s->catalog_size * 4)
 	goto fail;
     for (i = 0; i < s->catalog_size; i++)
 	le32_to_cpus(&s->catalog_bitmap[i]);
@@ -169,54 +165,35 @@ static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
     return -1;
 }
 
-static inline int seek_to_sector(BlockDriverState *bs, int64_t sector_num)
+static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
 {
     BDRVBochsState *s = bs->opaque;
     int64_t offset = sector_num * 512;
-    int64_t extent_index, extent_offset, bitmap_offset, block_offset;
+    int64_t extent_index, extent_offset, bitmap_offset;
     char bitmap_entry;
 
     // seek to sector
     extent_index = offset / s->extent_size;
     extent_offset = (offset % s->extent_size) / 512;
 
-    if (s->catalog_bitmap[extent_index] == 0xffffffff)
-    {
-//	fprintf(stderr, "page not allocated [%x - %x:%x]\n",
-//	    sector_num, extent_index, extent_offset);
-	return -1; // not allocated
+    if (s->catalog_bitmap[extent_index] == 0xffffffff) {
+	return -1; /* not allocated */
     }
 
     bitmap_offset = s->data_offset + (512 * s->catalog_bitmap[extent_index] *
 	(s->extent_blocks + s->bitmap_blocks));
-    block_offset = bitmap_offset + (512 * (s->bitmap_blocks + extent_offset));
-
-//    fprintf(stderr, "sect: %x [ext i: %x o: %x] -> %x bitmap: %x block: %x\n",
-//	sector_num, extent_index, extent_offset,
-//	le32_to_cpu(s->catalog_bitmap[extent_index]),
-//	bitmap_offset, block_offset);
-
-    // read in bitmap for current extent
-    if (lseek(s->fd, bitmap_offset + (extent_offset / 8), SEEK_SET) ==
-        (off_t)-1) {
-        return -1;
-    }
 
-    if (read(s->fd, &bitmap_entry, 1) != 1)
+    /* read in bitmap for current extent */
+    if (pread(s->fd, &bitmap_entry, 1, bitmap_offset + (extent_offset / 8))
+            != 1) {
         return -1;
-
-    if (!((bitmap_entry >> (extent_offset % 8)) & 1))
-    {
-//	fprintf(stderr, "sector (%x) in bitmap not allocated\n",
-//	    sector_num);
-	return -1; // not allocated
     }
 
-    if (lseek(s->fd, block_offset, SEEK_SET) == (off_t)-1) {
-        return -1;
+    if (!((bitmap_entry >> (extent_offset % 8)) & 1)) {
+	return -1; /* not allocated */
     }
 
-    return 0;
+    return bitmap_offset + (512 * (s->bitmap_blocks + extent_offset));
 }
 
 static int bochs_read(BlockDriverState *bs, int64_t sector_num,
@@ -226,13 +203,13 @@ static int bochs_read(BlockDriverState *bs, int64_t sector_num,
     int ret;
 
     while (nb_sectors > 0) {
-	if (!seek_to_sector(bs, sector_num))
-	{
-	    ret = read(s->fd, buf, 512);
-	    if (ret != 512)
-		return -1;
-	}
-	else
+        int64_t block_offset = seek_to_sector(bs, sector_num);
+        if (block_offset >= 0) {
+            ret = pread(s->fd, buf, 512, block_offset);
+            if (ret != 512) {
+                return -1;
+            }
+        } else
             memset(buf, 0, 512);
         nb_sectors--;
         sector_num++;
Signature · 1 line
1.6.6.1
author
#7 lore raw

PATCH 7/11 bochs: use qemu block API

In reply to Kevin Wolf

From: Christoph Hellwig <[email protected]>

Use bdrv_pwrite to access the backing device instead of pread, and convert the driver to implementing the bdrv_open method which gives it an already opened BlockDriverState for the underlying device.

---
 block/bochs.c |   30 +++++++++---------------------
 1 files changed, 9 insertions(+), 21 deletions(-)
block/bochs.c +9 -21
index b54f54d..5fe2fa3 100644
@@ -80,8 +80,6 @@ struct bochs_header {
 };
 
 typedef struct BDRVBochsState {
-    int fd;
-
     uint32_t *catalog_bitmap;
     int catalog_size;
 
@@ -109,23 +107,16 @@ static int bochs_probe(const uint8_t *buf, int buf_size, const char *filename)
     return 0;
 }
 
-static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
+static int bochs_open(BlockDriverState *bs, int flags)
 {
     BDRVBochsState *s = bs->opaque;
-    int fd, i;
+    int i;
     struct bochs_header bochs;
     struct bochs_header_v1 header_v1;
 
-    fd = open(filename, O_RDONLY | O_BINARY);
-    if (fd < 0) {
-        return -1;
-    }
-
     bs->read_only = 1; // no write support yet
 
-    s->fd = fd;
-
-    if (pread(fd, &bochs, sizeof(bochs), 0) != sizeof(bochs)) {
+    if (bdrv_pread(bs->file, 0, &bochs, sizeof(bochs)) != sizeof(bochs)) {
         goto fail;
     }
 
@@ -146,8 +137,8 @@ static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
 
     s->catalog_size = le32_to_cpu(bochs.extra.redolog.catalog);
     s->catalog_bitmap = qemu_malloc(s->catalog_size * 4);
-    if (pread(s->fd, s->catalog_bitmap, s->catalog_size * 4,
-              le32_to_cpu(bochs.header)) != s->catalog_size * 4)
+    if (bdrv_pread(bs->file, le32_to_cpu(bochs.header), s->catalog_bitmap,
+                   s->catalog_size * 4) != s->catalog_size * 4)
 	goto fail;
     for (i = 0; i < s->catalog_size; i++)
 	le32_to_cpus(&s->catalog_bitmap[i]);
@@ -161,7 +152,6 @@ static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
 
     return 0;
  fail:
-    close(fd);
     return -1;
 }
 
@@ -184,8 +174,8 @@ static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
 	(s->extent_blocks + s->bitmap_blocks));
 
     /* read in bitmap for current extent */
-    if (pread(s->fd, &bitmap_entry, 1, bitmap_offset + (extent_offset / 8))
-            != 1) {
+    if (bdrv_pread(bs->file, bitmap_offset + (extent_offset / 8),
+                   &bitmap_entry, 1) != 1) {
         return -1;
     }
 
@@ -199,13 +189,12 @@ static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
 static int bochs_read(BlockDriverState *bs, int64_t sector_num,
                     uint8_t *buf, int nb_sectors)
 {
-    BDRVBochsState *s = bs->opaque;
     int ret;
 
     while (nb_sectors > 0) {
         int64_t block_offset = seek_to_sector(bs, sector_num);
         if (block_offset >= 0) {
-            ret = pread(s->fd, buf, 512, block_offset);
+            ret = bdrv_pread(bs->file, block_offset, buf, 512);
             if (ret != 512) {
                 return -1;
             }
@@ -222,14 +211,13 @@ static void bochs_close(BlockDriverState *bs)
 {
     BDRVBochsState *s = bs->opaque;
     qemu_free(s->catalog_bitmap);
-    close(s->fd);
 }
 
 static BlockDriver bdrv_bochs = {
     .format_name	= "bochs",
     .instance_size	= sizeof(BDRVBochsState),
     .bdrv_probe		= bochs_probe,
-    .bdrv_file_open	= bochs_open,
+    .bdrv_open		= bochs_open,
     .bdrv_read		= bochs_read,
     .bdrv_close		= bochs_close,
 };
Signature · 1 line
1.6.6.1
author
#8 lore raw

PATCH 8/11 block: Avoid unchecked casts for AIOCBs

In reply to Kevin Wolf

Use container_of for one direction and &acb->common for the other one.

---
 block.c          |    3 ++-
 block/blkdebug.c |    4 ++--
 block/qcow.c     |    2 +-
 block/qcow2.c    |    2 +-
 block/vdi.c      |    2 +-
 5 files changed, 7 insertions(+), 6 deletions(-)
block.c +2 -1
index 48305b7..6345599 100644
@@ -2108,7 +2108,8 @@ typedef struct BlockDriverAIOCBSync {
 
 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
 {
-    BlockDriverAIOCBSync *acb = (BlockDriverAIOCBSync *)blockacb;
+    BlockDriverAIOCBSync *acb =
+        container_of(blockacb, BlockDriverAIOCBSync, common);
     qemu_bh_delete(acb->bh);
     acb->bh = NULL;
     qemu_aio_release(acb);
block/blkdebug.c +2 -2
index bb4a91a..8325f75 100644
@@ -320,7 +320,7 @@ static void error_callback_bh(void *opaque)
 
 static void blkdebug_aio_cancel(BlockDriverAIOCB *blockacb)
 {
-    BlkdebugAIOCB *acb = (BlkdebugAIOCB*) blockacb;
+    BlkdebugAIOCB *acb = container_of(blockacb, BlkdebugAIOCB, common);
     qemu_aio_release(acb);
 }
 
@@ -347,7 +347,7 @@ static BlockDriverAIOCB *inject_error(BlockDriverState *bs,
     acb->bh = bh;
     qemu_bh_schedule(bh);
 
-    return (BlockDriverAIOCB*) acb;
+    return &acb->common;
 }
 
 static BlockDriverAIOCB *blkdebug_aio_readv(BlockDriverState *bs,
block/qcow.c +1 -1
index 2883c40..449858f 100644
@@ -502,7 +502,7 @@ typedef struct QCowAIOCB {
 
 static void qcow_aio_cancel(BlockDriverAIOCB *blockacb)
 {
-    QCowAIOCB *acb = (QCowAIOCB *)blockacb;
+    QCowAIOCB *acb = container_of(blockacb, QCowAIOCB, common);
     if (acb->hd_aiocb)
         bdrv_aio_cancel(acb->hd_aiocb);
     qemu_aio_release(acb);
block/qcow2.c +1 -1
index 21ed6f8..40bd32a 100644
@@ -340,7 +340,7 @@ typedef struct QCowAIOCB {
 
 static void qcow_aio_cancel(BlockDriverAIOCB *blockacb)
 {
-    QCowAIOCB *acb = (QCowAIOCB *)blockacb;
+    QCowAIOCB *acb = container_of(blockacb, QCowAIOCB, common);
     if (acb->hd_aiocb)
         bdrv_aio_cancel(acb->hd_aiocb);
     qemu_aio_release(acb);
block/vdi.c +1 -1
index 1d257b4..2b4d2c2 100644
@@ -469,7 +469,7 @@ static int vdi_is_allocated(BlockDriverState *bs, int64_t sector_num,
 static void vdi_aio_cancel(BlockDriverAIOCB *blockacb)
 {
     /* TODO: This code is untested. How can I get it executed? */
-    VdiAIOCB *acb = (VdiAIOCB *)blockacb;
+    VdiAIOCB *acb = container_of(blockacb, VdiAIOCB, common);
     logout("\n");
     if (acb->hd_aiocb) {
         bdrv_aio_cancel(acb->hd_aiocb);
Signature · 1 line
1.6.6.1
author
#9 lore raw

PATCH 9/11 block: Fix protocol detection for Windows devices

In reply to Kevin Wolf

We can't assume the file protocol for Windows devices, they need the same detection as other files for which an explicit protocol is not specified.

---
 block.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)
block.c +6 -4
index 6345599..977d01f 100644
@@ -287,16 +287,18 @@ static BlockDriver *find_protocol(const char *filename)
     char protocol[128];
     int len;
     const char *p;
+    int is_drive;
 
     /* TODO Drivers without bdrv_file_open must be specified explicitly */
 
 #ifdef _WIN32
-    if (is_windows_drive(filename) ||
-        is_windows_drive_prefix(filename))
-        return bdrv_find_format("file");
+    is_drive = is_windows_drive(filename) ||
+        is_windows_drive_prefix(filename);
+#else
+    is_drive = 0;
 #endif
     p = strchr(filename, ':');
-    if (!p) {
+    if (!p || is_drive) {
         drv1 = find_hdev_driver(filename);
         if (!drv1) {
             drv1 = bdrv_find_format("file");
Signature · 1 line
1.6.6.1
author
#10 lore raw

PATCH 10/11 block: Fix bdrv_commit

In reply to Kevin Wolf

When reopening the image, don't guess the driver, but use the same driver as was used before. This is important if the format=... option was used for that image.

---
 block.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
block.c +3 -3
index 977d01f..c134c2b 100644
@@ -701,12 +701,12 @@ int bdrv_commit(BlockDriverState *bs)
         bdrv_delete(bs->backing_hd);
         bs->backing_hd = NULL;
         bs_rw = bdrv_new("");
-        rw_ret = bdrv_open(bs_rw, filename, open_flags | BDRV_O_RDWR, NULL);
+        rw_ret = bdrv_open(bs_rw, filename, open_flags | BDRV_O_RDWR, drv);
         if (rw_ret < 0) {
             bdrv_delete(bs_rw);
             /* try to re-open read-only */
             bs_ro = bdrv_new("");
-            ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, NULL);
+            ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, drv);
             if (ret < 0) {
                 bdrv_delete(bs_ro);
                 /* drive not functional anymore */
@@ -758,7 +758,7 @@ ro_cleanup:
         bdrv_delete(bs->backing_hd);
         bs->backing_hd = NULL;
         bs_ro = bdrv_new("");
-        ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, NULL);
+        ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, drv);
         if (ret < 0) {
             bdrv_delete(bs_ro);
             /* drive not functional anymore */
Signature · 1 line
1.6.6.1
author
#11 lore raw

PATCH 11/11 block/vdi: Allow disk images of size 0

In reply to Kevin Wolf

From: Stefan Weil <[email protected]>

Even it is not very useful, users may create images of size 0.

Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz aborts execution when it is told to allocate 0 bytes, so avoid this kind of call.

---
 block/vdi.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)
block/vdi.c +7 -2
index 2b4d2c2..3ea4103 100644
@@ -435,7 +435,9 @@ static int vdi_open(BlockDriverState *bs, int flags)
 
     bmap_size = header.blocks_in_image * sizeof(uint32_t);
     bmap_size = (bmap_size + SECTOR_SIZE - 1) / SECTOR_SIZE;
-    s->bmap = qemu_malloc(bmap_size * SECTOR_SIZE);
+    if (bmap_size > 0) {
+        s->bmap = qemu_malloc(bmap_size * SECTOR_SIZE);
+    }
     if (bdrv_read(bs->file, s->bmap_sector, (uint8_t *)s->bmap, bmap_size) < 0) {
         goto fail_free_bmap;
     }
@@ -857,7 +859,10 @@ static int vdi_create(const char *filename, QEMUOptionParameter *options)
         result = -errno;
     }
 
-    bmap = (uint32_t *)qemu_mallocz(bmap_size);
+    bmap = NULL;
+    if (bmap_size > 0) {
+        bmap = (uint32_t *)qemu_mallocz(bmap_size);
+    }
     for (i = 0; i < blocks; i++) {
         if (image_type == VDI_TYPE_STATIC) {
             bmap[i] = i;
Signature · 1 line
1.6.6.1