Support for devices with FAT32 PBR
PATCH v3 1/1 Support for devices with FAT32 PBR
--- disk/part_dos.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
disk/part_dos.c +2 -1
@@ -77,7 +77,8 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) {return (-1 ); }/* no DOS Signature at all */ -if (strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) +if ((strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) || + (strncmp ((char *)&buffer[DOS_PBR_FAT32_FSTYPE_OFFSET ],"FAT32" ,5 )==0 ) )return DOS_PBR ;/* is PBR */ return DOS_MBR ;/* Is MBR */ }
Signature · 5 lines
1.5.4.3 --- disk/part_dos.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
disk/part_dos.h +1 -0
@@ -35,6 +35,7 @@#define DOS_PART_TBL_OFFSET 0x1be#define DOS_PART_MAGIC_OFFSET 0x1fe#define DOS_PBR_FSTYPE_OFFSET 0x36 +#define DOS_PBR_FAT32_FSTYPE_OFFSET 0x52#define DOS_PBR_MEDIA_TYPE_OFFSET 0x15#define DOS_MBR 0#define DOS_PBR 1
Signature · 5 lines
1.5.4.3 --- fs/fat/fat.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)
fs/fat/fat.c +5 -2
@@ -50,6 +50,7 @@ static int cur_part = 1;#define DOS_PART_TBL_OFFSET 0x1be#define DOS_PART_MAGIC_OFFSET 0x1fe#define DOS_FS_TYPE_OFFSET 0x36 +#define DOS_FS_FAT32_TYPE_OFFSET 0x52int disk_read (__u32 startblock,__u32 getsize,__u8 * bufptr) {
@@ -94,7 +95,8 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)if (!get_partition_info (dev_desc, part_no, &info)) { part_offset = info.start; cur_part = part_no; - }else if (!strncmp ((char *)&buffer[DOS_FS_TYPE_OFFSET ],"FAT" ,3 )) { + }else if (!strncmp ((char *)&buffer[DOS_FS_TYPE_OFFSET ],"FAT" ,3 ) || + !strncmp ((char *)&buffer[DOS_FS_FAT32_TYPE_OFFSET ],"FAT32" ,5 )) {/* ok, we assume we are on a PBR only */ cur_part =1 ; part_offset =0 ;
@@ -105,7 +107,8 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) }#else -if (!strncmp ((char *)&buffer[DOS_FS_TYPE_OFFSET ],"FAT" ,3 )) { +if (!strncmp ((char *)&buffer[DOS_FS_TYPE_OFFSET ],"FAT" ,3 ) || + !strncmp ((char *)&buffer[DOS_FS_FAT32_TYPE_OFFSET ],"FAT32" ,5 ) ) {/* ok, we assume we are on a PBR only */ cur_part =1 ; part_offset =0 ;
Signature · 1 line
1.5.4.3
PATCH v3 1/1 Support for devices with FAT32 PBR
Hello.
Quoted 11 lines · Igor Luri
Signed-off-by Igor Luri <[email protected]>--- disk/part_dos.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)disk/part_dos.c +0
-0
disk/part_dos.c static int test_block_type(unsigned char *buffer) · line 84
Quoted 9 lines
disk/part_dos.c +2
-1@@ -77,7 +77,8 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) {return (-1 ); }/* no DOS Signature at all */ -if (strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) +if ((strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) || + (strncmp ((char *)&buffer[DOS_PBR_FAT32_FSTYPE_OFFSET ],"FAT32" ,5 )==0 ) )return DOS_PBR ;/* is PBR */ return DOS_MBR ;/* Is MBR */ }
This was not a single patch, that was tree patches in the single
email. :-)
WBR, Sergei
PATCH v3 1/1 Support for devices with FAT32 PBR
Dear Sergei,
I have readen git-format-patch commands manual and I don't find any option to create a single patch, by default creates a patch per commit change.
How can I create a single patch?
I would apreciate any help.
Best regards.
El lun, 10-05-2010 a las 19:22 +0400, Sergei Shtylyov escribi?:
Quoted 31 lines
Hello.
Quoted 11 lines · Igor Luri
Signed-off-by Igor Luri <[email protected]>--- disk/part_dos.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)disk/part_dos.c +0
-0disk/part_dos.c static int test_block_type(unsigned char *buffer) · line 84
Quoted 9 lines
disk/part_dos.c +2
-1@@ -77,7 +77,8 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) {return (-1 ); }/* no DOS Signature at all */ -if (strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) +if ((strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) || + (strncmp ((char *)&buffer[DOS_PBR_FAT32_FSTYPE_OFFSET ],"FAT32" ,5 )==0 ) )return DOS_PBR ;/* is PBR */ return DOS_MBR ;/* Is MBR */ }This was not a single patch, that was tree patches in the single
email. :-)WBR, Sergei
Signature · 9 lines
Igor Luri
R&D Software Department
Fagor Aotek S. Coop.
P. O. Box 144
E-20500 Mondrag?n-Arrasate
Tel. ++34 943 71 92 00
++34 943 71 92 01 (Ext. 44268)
Fax. ++34 943 79 92 03
www.aotek.esPATCH v3 1/1 Support for devices with FAT32 PBR
Hello.
Quoted 8 lines · Igor Luri
Dear Sergei,
I have readen git-format-patch commands manual and I don't find any option to create a single patch, by default creates a patch per commit change.
How can I create a single patch?
You need to redo your several commits as a single commit --
git-format-patch won't help here.
Quoted 37 lines
I would apreciate any help.
Best regards.
El lun, 10-05-2010 a las 19:22 +0400, Sergei Shtylyov escribi?:
Quoted 29 lines
Hello.
Quoted 12 lines · Igor Luri
Signed-off-by Igor Luri <[email protected]>--- disk/part_dos.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)disk/part_dos.c +0
-0disk/part_dos.c static int test_block_type(unsigned char *buffer) · line 84
Quoted 9 lines
disk/part_dos.c +2
-1@@ -77,7 +77,8 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) {return (-1 ); }/* no DOS Signature at all */ -if (strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) +if ((strncmp ((char *)&buffer[DOS_PBR_FSTYPE_OFFSET ],"FAT" ,3 )==0 ) || + (strncmp ((char *)&buffer[DOS_PBR_FAT32_FSTYPE_OFFSET ],"FAT32" ,5 )==0 ) )return DOS_PBR ;/* is PBR */ return DOS_MBR ;/* Is MBR */ }This was not a single patch, that was tree patches in the single
email. :-)
WBR, Sergei