Skip to contentSkip to conversation

ath9k: change beacon allocation to prefer the first beacon slot

PATCH In review Felix Fietkau 2 participants 3 messages May 13, 2010 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ath9k: change beacon allocation to prefer the first beacon slot

This fixes IBSS beacon transmissions without VEOL enabled

---
 drivers/net/wireless/ath/ath9k/beacon.c |   12 +++---------
 1 files changed, 3 insertions(+), 9 deletions(-)
drivers/net/wireless/ath/ath9k/beacon.c +3 -9
index c8a4558..77face7 100644
@@ -274,17 +274,11 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 			avp->av_bslot = 0;
 			for (slot = 0; slot < ATH_BCBUF; slot++)
 				if (sc->beacon.bslot[slot] == NULL) {
-					/*
-					 * XXX hack, space out slots to better
-					 * deal with misses
-					 */
-					if (slot+1 < ATH_BCBUF &&
-					    sc->beacon.bslot[slot+1] == NULL) {
-						avp->av_bslot = slot+1;
-						break;
-					}
 					avp->av_bslot = slot;
+
 					/* NB: keep looking for a double slot */
+					if (slot == 0 || !sc->beacon.bslot[slot-1])
+						break;
 				}
 			BUG_ON(sc->beacon.bslot[avp->av_bslot] != NULL);
 			sc->beacon.bslot[avp->av_bslot] = vif;
Signature · 1 line
1.6.4.2
#1 lore raw

PATCH 2/2 ath9k: remove VEOL support for ad-hoc

With VEOL, Beacon transmission in ad-hoc does not currently work. I believe for larger ad-hoc networks, VEOL is too unreliable, as it can get beacon transmissions stuck during synchronization. Use SWBA based beacon trasmission similar to AP mode instead.

---
 drivers/net/wireless/ath/ath9k/beacon.c |   63 +++++--------------------------
 1 files changed, 10 insertions(+), 53 deletions(-)
drivers/net/wireless/ath/ath9k/beacon.c +10 -53
index 77face7..f43d85a 100644
@@ -76,22 +76,13 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 	ds = bf->bf_desc;
 	flags = ATH9K_TXDESC_NOACK;
 
-	if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
-	     (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) &&
-	    (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
-		ds->ds_link = bf->bf_daddr; /* self-linked */
-		flags |= ATH9K_TXDESC_VEOL;
-		/* Let hardware handle antenna switching. */
-		antenna = 0;
-	} else {
-		ds->ds_link = 0;
-		/*
-		 * Switch antenna every beacon.
-		 * Should only switch every beacon period, not for every SWBA
-		 * XXX assumes two antennae
-		 */
-		antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
-	}
+	ds->ds_link = 0;
+	/*
+	 * Switch antenna every beacon.
+	 * Should only switch every beacon period, not for every SWBA
+	 * XXX assumes two antennae
+	 */
+	antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
 
 	sband = &sc->sbands[common->hw->conf.channel->band];
 	rate = sband->bitrates[rateidx].hw_value;
@@ -215,36 +206,6 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 	return bf;
 }
 
-/*
- * Startup beacon transmission for adhoc mode when they are sent entirely
- * by the hardware using the self-linked descriptor + veol trick.
-*/
-static void ath_beacon_start_adhoc(struct ath_softc *sc,
-				   struct ieee80211_vif *vif)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_buf *bf;
-	struct ath_vif *avp;
-	struct sk_buff *skb;
-
-	avp = (void *)vif->drv_priv;
-
-	if (avp->av_bcbuf == NULL)
-		return;
-
-	bf = avp->av_bcbuf;
-	skb = bf->bf_mpdu;
-
-	ath_beacon_setup(sc, avp, bf, 0);
-
-	/* NB: caller is known to have already stopped tx dma */
-	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
-	ath9k_hw_txstart(ah, sc->beacon.beaconq);
-	ath_print(common, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
-		  sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
-}
-
 int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 {
 	struct ath_softc *sc = aphy->sc;
@@ -265,7 +226,8 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		list_del(&avp->av_bcbuf->list);
 
 		if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
-		    !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+		    sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC ||
+		    sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) {
 			int slot;
 			/*
 			 * Assign the vif to a beacon xmit slot. As
@@ -715,8 +677,7 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	 * self-linked tx descriptor and let the hardware deal with things.
 	 */
 	intval |= ATH9K_BEACON_ENA;
-	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
-		ah->imask |= ATH9K_INT_SWBA;
+	ah->imask |= ATH9K_INT_SWBA;
 
 	ath_beaconq_config(sc);
 
@@ -726,10 +687,6 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(ah, ah->imask);
-
-	/* FIXME: Handle properly when vif is NULL */
-	if (vif && ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
-		ath_beacon_start_adhoc(sc, vif);
 }
 
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
Signature · 1 line
1.6.4.2
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] ath9k: remove VEOL support for ad-hoc

Quoted 6 lines · Felix Fietkau

With VEOL, Beacon transmission in ad-hoc does not currently work. I believe for larger ad-hoc networks, VEOL is too unreliable, as it can get beacon transmissions stuck during synchronization. Use SWBA based beacon trasmission similar to AP mode instead.

This is very good step toward IBSS. Thanks Felix!

Quoted 106 lines
---
  drivers/net/wireless/ath/ath9k/beacon.c |   63 +++++--------------------------
  1 files changed, 10 insertions(+), 53 deletions(-)
drivers/net/wireless/ath/ath9k/beacon.c +10 -53
index 77face7..f43d85a 100644
@@ -76,22 +76,13 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
  	ds = bf->bf_desc;
  	flags = ATH9K_TXDESC_NOACK;
 
-	if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
-	     (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT))&&
-	    (ah->caps.hw_caps&  ATH9K_HW_CAP_VEOL)) {
-		ds->ds_link = bf->bf_daddr; /* self-linked */
-		flags |= ATH9K_TXDESC_VEOL;
-		/* Let hardware handle antenna switching. */
-		antenna = 0;
-	} else {
-		ds->ds_link = 0;
-		/*
-		 * Switch antenna every beacon.
-		 * Should only switch every beacon period, not for every SWBA
-		 * XXX assumes two antennae
-		 */
-		antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs)&  1 ? 2 : 1);
-	}
+	ds->ds_link = 0;
+	/*
+	 * Switch antenna every beacon.
+	 * Should only switch every beacon period, not for every SWBA
+	 * XXX assumes two antennae
+	 */
+	antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs)&  1 ? 2 : 1);
 
  	sband =&sc->sbands[common->hw->conf.channel->band];
  	rate = sband->bitrates[rateidx].hw_value;
@@ -215,36 +206,6 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
  	return bf;
  }
 
-/*
- * Startup beacon transmission for adhoc mode when they are sent entirely
- * by the hardware using the self-linked descriptor + veol trick.
-*/
-static void ath_beacon_start_adhoc(struct ath_softc *sc,
-				   struct ieee80211_vif *vif)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_buf *bf;
-	struct ath_vif *avp;
-	struct sk_buff *skb;
-
-	avp = (void *)vif->drv_priv;
-
-	if (avp->av_bcbuf == NULL)
-		return;
-
-	bf = avp->av_bcbuf;
-	skb = bf->bf_mpdu;
-
-	ath_beacon_setup(sc, avp, bf, 0);
-
-	/* NB: caller is known to have already stopped tx dma */
-	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
-	ath9k_hw_txstart(ah, sc->beacon.beaconq);
-	ath_print(common, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
-		  sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
-}
-
  int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
  {
  	struct ath_softc *sc = aphy->sc;
@@ -265,7 +226,8 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
  		list_del(&avp->av_bcbuf->list);
 
  		if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
-		    !(sc->sc_ah->caps.hw_caps&  ATH9K_HW_CAP_VEOL)) {
+		    sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC ||
+		    sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) {
  			int slot;
  			/*
  			 * Assign the vif to a beacon xmit slot. As
@@ -715,8 +677,7 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
  	 * self-linked tx descriptor and let the hardware deal with things.
  	 */
  	intval |= ATH9K_BEACON_ENA;
-	if (!(ah->caps.hw_caps&  ATH9K_HW_CAP_VEOL))
-		ah->imask |= ATH9K_INT_SWBA;
+	ah->imask |= ATH9K_INT_SWBA;
 
  	ath_beaconq_config(sc);
 
@@ -726,10 +687,6 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
  	ath9k_beacon_init(sc, nexttbtt, intval);
  	sc->beacon.bmisscnt = 0;
  	ath9k_hw_set_interrupts(ah, ah->imask);
-
-	/* FIXME: Handle properly when vif is NULL */
-	if (vif&&  ah->caps.hw_caps&  ATH9K_HW_CAP_VEOL)
-		ath_beacon_start_adhoc(sc, vif);
  }
 
  void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)