Skip to contentSkip to conversation

input: alps: Add support for the touchpad on Dell Latitude E6410

PATCH In review Thomas Bächler 2 participants 3 messages May 15, 2010 – May 20, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 input: alps: Add support for the touchpad on Dell Latitude E6410

---
 drivers/input/mouse/alps.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/input/mouse/alps.c +2 -0
index 99d5876..0c83070 100644
@@ -66,6 +66,8 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
 	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x64 }, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT },				  /* Dell Latitude E6410 */
 };
 
 /*
Signature · 1 line
1.7.1
#1 lore raw

Am 15.05.2010 15:52, schrieb Thomas Bächler:

Quoted 9 lines
---
 drivers/input/mouse/alps.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/input/mouse/alps.c +0 -0
index 99d5876..0c83070 100644

drivers/input/mouse/alps.c static const struct alps_model_info alps_model_data[] = { · line 73

Quoted 8 lines
drivers/input/mouse/alps.c +2 -0
@@ -66,6 +66,8 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
 	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x64 }, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT },				  /* Dell Latitude E6410 */
 };
 
 /*

Okay, never mind, we were too quick in thinking everything was correct, the parameters seem to be wrong. The touchpad is detected and seems to work, but in 'synclient -m', you see that actually nothing happens.

Dmitry, do you know which parameters we need to tweak to fix this? Maybe the 0xff, 0xff mask is wrong? Or the flags? Sorry, my knowledge ends here.

#2 lore raw
Quoted 17 lines · Thomas Bächler

Am 15.05.2010 15:52, schrieb Thomas Bächler:

Quoted 16 lines

---
 drivers/input/mouse/alps.c |    2 ++

 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/input/mouse/alps.c +0 -0
index 99d5876..0c83070 100644
@@ -66,6 +66,8 @@ static const struct alps_model_info alps_model_data[] = {

      { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },          /* Dell Vostro 1400 */ { { 0x52, 0x01, 0x14 }, 0xff, 0xff,
              ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },      /* Toshiba Tecra A11-11L */
+     { { 0x73, 0x02, 0x64 }, 0xff, 0xff,
+             ALPS_PASS | ALPS_DUALPOINT },                             /* Dell Latitude E6410 */ };

Quoted 8 lines
Quoted 1 line

 /*

Okay, never mind, we were too quick in thinking everything was correct, the parameters seem to be wrong. The touchpad is detected and seems to work, but in 'synclient -m', you see that actually nothing happens.

Dmitry, do you know which parameters we need to tweak to fix this? Maybe the 0xff, 0xff mask is wrong? Or the flags? Sorry, my knowledge ends here.

Been there, done that. I originally pushed a patch with this signature about a month ago. It was applied, but then reverted because it didn't work right. It seems there's a new protocol for these alps touchpads that will need to be figured out first.

-- Chase
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html