Makefile: rework / cleanup
cover Makefile: rework / cleanup
The top level Makefile is growing and growing. Once, wehn we suppoted only a few tens of boards, it was possible to implement board configuration logic in the Makefile, but it quickly turned out that this doesn't scale. Also, it is not really needed (at least not any more) - we noch have mechanisnms in place, that allow for more efficient code.
The following patch series is an attempt to start some cleanup and reduce the size of the top level Makefile. The solution is neither perfect nor complete - there are quite a lot of boards that resist such a cleanup and need more thorough cleanup. But it's an initial step, showing what could and should be done, which boards have problems, and why this is the case. Eentually this paves the ground for a more friendly way to add new board configurations.
1/3:
Fix printing of make targets, simplify Makefile
Makefile | 740 ++++++++++++++++++++----------------------------------------- 1 files changed, 243 insertions(+), 497 deletions(-)
2/3:
Makefile: simplify handling of build target names
Makefile | 774 ++++++++++++++++++++++++++++++-------------------------------- mkconfig | 4 +- 2 files changed, 379 insertions(+), 399 deletions(-)
3/3:
Makefile: simplify handling of common board configurations
Makefile | 1436 ++++++++++++++++++++++++++------------------------------------ 1 files changed, 607 insertions(+), 829 deletions(-)
PATCH 1/3 Fix printing of make targets, simplify Makefile
Make printing the "board names" more useful. So far, we would get output like this;
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot
For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful:
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 740 ++++++++++++++++++++----------------------------------------- 1 files changed, 243 insertions(+), 497 deletions(-)
Makefile +243 -497
@@ -467,7 +467,7 @@ CHANGELOG: unexpand -a | sed -e 's/\s\s*$$//' > $@ include/license.h: tools/bin2header COPYING - cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h + cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h ######################################################################### unconfig:
@@ -518,20 +518,16 @@ digsy_mtc_RAMBOOT_config: unconfig @mkdir -p $(obj)board/digsy_mtc @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp @[ -z "$(findstring RAMBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with RAMBOOT configuration" ; \ - } - @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc + echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp + @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc galaxy5200_LOWBOOT_config \ galaxy5200_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200 + @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 hmi1001_config: unconfig @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
@@ -548,22 +544,15 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { if [ "$(findstring DDR,$@)" ] ; \ + if [ "$(findstring DDR,$@)" ] ; \ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - fi ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + fi @[ -z "$(findstring LOWBOOT08,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ - echo "... with 8 MB flash only" ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube jupiter_config: unconfig @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
@@ -580,17 +569,12 @@ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h - @ $(XECHO) "... DDR memory revision" @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring _PM_,$@)" ] || \ - { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ - $(XECHO) "... with power management (low-power mode) support" ; \ - } + echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube mcc200_config \ mcc200_SDRAM_config \
@@ -606,38 +590,22 @@ prs200_highboot_config \ prs200_highboot_DDR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mcc200 - @[ -n "$(findstring highboot,$@)" ] || \ - { $(XECHO) "... with lowboot configuration" ; \ - } @[ -z "$(findstring highboot,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ - $(XECHO) "... with highboot configuration" ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp @[ -n "$(findstring _SDRAM,$@)" ] || \ - { if [ -n "$(findstring mcc200,$@)" ]; \ - then \ - $(XECHO) "... with DDR" ; \ - else \ - if [ -n "$(findstring _DDR,$@)" ];\ + if [ -n "$(findstring prs200,$@)" ]; \ + then \ + if [ -z "$(findstring _DDR,$@)" ];\ then \ - $(XECHO) "... with DDR" ; \ - else \ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ - $(XECHO) "... with SDRAM" ; \ fi; \ - fi; \ - } + fi @[ -z "$(findstring _SDRAM,$@)" ] || \ - { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with SDRAM" ; \ - } + echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h @[ -z "$(findstring COM12,$@)" ] || \ - { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ - $(XECHO) "... with console on COM12" ; \ - } + echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h @[ -z "$(findstring prs200,$@)" ] || \ - { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ - } + echo "#define CONFIG_PRS200" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 mecp5200_config: unconfig
@@ -657,7 +625,7 @@ MVBC_P_config: unconfig @mkdir -p $(obj)board/mvbc_p @ >$(obj)include/config.h @[ -z "$(findstring MVBC_P,$@)" ] || \ - { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision MVSMR_config: unconfig
@@ -673,10 +641,8 @@ pcm030_LOWBOOT_config: unconfig @mkdir -p $(obj)include $(obj)board/phytec/pcm030 @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec + echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp + @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec pf5200_config: unconfig @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd
@@ -687,14 +653,10 @@ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @[ -z "$(findstring ROMBOOT,$@)" ] || \ - { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ - $(XECHO) "... booting from 8-bit flash" ; \ - } - @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520 + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
@@ -706,9 +668,7 @@ TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... with MPC5200B processor" ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc MINI5200_config \
@@ -725,18 +685,12 @@ Total5200_Rev2_lowboot_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/total5200 @[ -n "$(findstring Rev,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 1 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h @[ -z "$(findstring Rev2_,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 2 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200 + echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp + @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200 cam5200_config \ cam5200_niosflash_config \
@@ -751,37 +705,26 @@ TQM5200_STK100_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/tqc/tqm5200 @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200S on Cam5200" ; \ + { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring niosflash,$@)" ] || \ - { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ - $(XECHO) "... with NIOS flash driver" ; \ - } + echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h @[ -z "$(findstring fo300,$@)" ] || \ - { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200 on FO300" ; \ - } + echo "#define CONFIG_FO300" >>$(obj)include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ - { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200_AC on MiniFAP" ; \ - } + echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h @[ -z "$(findstring STK100,$@)" ] || \ - { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ - $(XECHO) "... on a STK52XX.100 base board" ; \ - } + echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h @[ -z "$(findstring TQM5200_B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @[ -z "$(findstring TQM5200S,$@)" ] || \ - { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ + { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc uc101_config: unconfig
@@ -807,7 +750,7 @@ mpc5121ads_rev2_config \ @if [ "$(findstring rev2,$@)" ] ; then \ echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale + @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale pdm360ng_config: unconfig @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng
@@ -816,17 +759,15 @@ pdm360ng_config: unconfig ## MPC8xx Systems ######################################################################### -Adder_config \ Adder87x_config \ AdderII_config \ +AdderUSB_config \ +Adder_config \ : unconfig @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ - @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) - @$(MKCONFIG) -a Adder powerpc mpc8xx adder - -AdderUSB_config: unconfig - @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder + @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder ADS860_config \ FADS823_config \
@@ -834,7 +775,7 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads AMX860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
@@ -869,10 +810,8 @@ GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ - { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ - $(XECHO) "With reduced H/W feature set (SC)..." ; \ - } - @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t + echo "#define CONFIG_SC" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t GENIETV_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
@@ -895,10 +834,8 @@ ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 + echo "#define CONFIG_100MHz" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 IP860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
@@ -908,30 +845,24 @@ IVML24_128_config \ IVML24_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVML24_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_128_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_256_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm + echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVMS8_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm + echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm kmsupx4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -950,7 +881,7 @@ lwmon_config: unconfig MBX_config \ MBX860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx mgsuvd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -964,14 +895,10 @@ NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETVIA_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 1" ; \ - } + echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 2" ; \ - } - @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia + echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
@@ -979,12 +906,10 @@ NETPHONE_V2_config \ NETPHONE_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETPHONE_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone + echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@@ -998,24 +923,18 @@ NETTA_6412_config \ NETTA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring ISDN_,$@)" ] || \ - { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h @[ -n "$(findstring ISDN_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h @[ -z "$(findstring 6412_,$@)" ] || \ - { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h @[ -n "$(findstring 6412_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta + echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
@@ -1023,28 +942,26 @@ NETTA2_V2_config \ NETTA2_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETTA2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 + echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring CP850,$@)" ] || \ - { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ - echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev1,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev2,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650 + { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } + @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 NX823_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
@@ -1086,19 +1003,14 @@ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _64,$@)" ] || \ - { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 64MHz system clock ..."; \ - } + echo "#define RPXlite_64MHz" >>$(obj)include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with ENV in NVRAM ..."; \ - } - @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw + echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw rmu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
@@ -1161,9 +1073,8 @@ virtlab2_config: unconfig @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display" ; \ } - @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc TTTech_config: unconfig @mkdir -p $(obj)include
@@ -1253,25 +1164,21 @@ glacier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig @mkdir -p $(obj)include - @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h - @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h + @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h + @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave CMS700_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
@@ -1284,7 +1191,7 @@ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
@@ -1387,9 +1294,9 @@ haleakala_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/kilauea @mkdir -p $(obj)nand_spl/board/amcc/kilauea @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc korat_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
@@ -1448,7 +1355,7 @@ ocotea_config: unconfig OCRTC_config \ ORSG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd p3p440_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
@@ -1483,26 +1390,16 @@ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring EVB_BA,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ - $(XECHO) "... BASIC model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h @[ -z "$(findstring EVB_ME,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ - $(XECHO) "... MEDIUM model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h @[ -z "$(findstring EVB_HI,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ - $(XECHO) "... HIGH-END model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
@@ -1530,9 +1427,9 @@ rainier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc sequoia_ramboot_config \ rainier_ramboot_config: unconfig
@@ -1540,10 +1437,10 @@ rainier_ramboot_config: unconfig @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ $(obj)board/amcc/sequoia/config.tmp + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc taihu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
@@ -1577,7 +1474,7 @@ VOM405_config: unconfig W7OLMC_config \ W7OLMG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \
@@ -1641,7 +1538,7 @@ zeus_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska sorcery_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
@@ -1662,16 +1559,14 @@ BMW_config: unconfig CPC45_config \ CPC45_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45 CU824_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
@@ -1739,33 +1634,29 @@ cogent_mpc8260_config: unconfig CPU86_config \ CPU86_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86 CPU87_config \ CPU87_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87 ep8248_config \ ep8248E_config : unconfig - @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248 + @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 ep8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
@@ -1791,7 +1682,7 @@ ISPAN_REVB_config: unconfig @if [ "$(findstring _REVB_,$@)" ] ; then \ echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan + @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan mgcoge_config : unconfig @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
@@ -1823,10 +1714,8 @@ PQ2FADS-ZU_66MHz_lowboot_config \ $(if $(findstring VR,$@), \ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale + echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp + @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
@@ -1838,7 +1727,7 @@ muas3001_config : unconfig @if [ "$(findstring dev,$@)" ] ; then \ echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001 + @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001 # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \
@@ -1857,15 +1746,12 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ - $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ - $(XECHO) "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
@@ -1874,7 +1760,7 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi - @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826 + @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826 PM828_config \ PM828_PCI_config \
@@ -1884,14 +1770,12 @@ PM828_ROMBOOT_PCI_config: unconfig @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - $(XECHO) "... with PCI enabled" ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi - @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828 + @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 ppmc8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
@@ -1900,8 +1784,8 @@ Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ - @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) - @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler + @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler RPXsuper_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
@@ -1947,22 +1831,17 @@ TQM8265_AA_config: unconfig echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ - echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" = "yes" ] ; then \ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... with L2 Cache support" ; \ else \ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" = "60x" ] ; then \ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... with 60x Bus Mode" ; \ else \ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... without 60x Bus Mode" ; \ fi - @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc + @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc TQM8272_config: unconfig @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
@@ -1971,7 +1850,7 @@ VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h - @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk + @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
@@ -1982,7 +1861,7 @@ ZPC1900_config: unconfig astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + @$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro M5208EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
@@ -1999,16 +1878,14 @@ M52277EVB_stmicro_config : unconfig echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with SPANSION boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi - @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale + @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ M5235EVB_Flash16_config \
@@ -2026,7 +1903,7 @@ M5235EVB_Flash32_config: unconfig echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ fi - @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
@@ -2044,13 +1921,13 @@ EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EP2500_config: unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
@@ -2082,7 +1959,7 @@ M5329BFEE_config : unconfig if [ "$${NAND}" != "0" ] ; then \ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale + @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale M5373EVB_config : unconfig @case "$@" in \
@@ -2102,17 +1979,15 @@ M54451EVB_stmicro_config : unconfig if [ "$${FLASH}" = "NOR" ] ; then \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with NOR boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; - @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale + @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale M54455EVB_config \ M54455EVB_atmel_config \
@@ -2136,24 +2011,20 @@ M54455EVB_stm33_config : unconfig echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with INTEL boot..." ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ATMEL boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ - $(XECHO) "... with $${FREQ}Hz input clock" - @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale M5475AFE_config \ M5475BFE_config \
@@ -2186,7 +2057,7 @@ M5475GFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale + @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale M5485AFE_config \ M5485BFE_config \
@@ -2221,7 +2092,7 @@ M5485HFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale + @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale TASREG_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
@@ -2240,26 +2111,23 @@ MPC8313ERDB_NAND_66_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8313erdb @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _NAND_,$@)" ] ; then \ - $(XECHO) -n "...NAND..." ; \ echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale @if [ "$(findstring _NAND_,$@)" ] ; then \ echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ fi ; + @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
@@ -2271,30 +2139,25 @@ MPC832XEMDS_SLAVE_config \ MPC832XEMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale + @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
@@ -2311,7 +2174,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale + @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \
@@ -2320,49 +2183,42 @@ MPC8360EMDS_SLAVE_config \ MPC8360EMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale + @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale MPC8360ERDK_33_config \ MPC8360ERDK_66_config \ MPC8360ERDK_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "... CLKIN 33MHz " ; \ echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ fi ; - @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale + @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale MPC837XEMDS_config \ MPC837XEMDS_HOST_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale + @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
@@ -2373,29 +2229,27 @@ MVBLM7_config: unconfig sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/sheldon/simpc8313 @if [ "$(findstring _LP_,$@)" ] ; then \ - $(XECHO) -n "...Large Page NAND..." ; \ echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SP_,$@)" ] ; then \ - $(XECHO) -n "...Small Page NAND..." ; \ echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc caddy2_config \ vme8349_config: unconfig - @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd + @$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd edb9301_config \ edb9302_config \
@@ -2405,7 +2259,7 @@ edb9307a_config \ edb9312_config \ edb9315_config \ edb9315a_config: unconfig - @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx + @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx ######################################################################### ## MPC85xx Systems
@@ -2419,7 +2273,7 @@ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
@@ -2428,21 +2282,15 @@ MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ -MPC8540EVAL_66_slave_config: unconfig +MPC8540EVAL_66_slave_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) "... 33 MHz PCI" ; \ - else \ + @if [ -z "$(findstring _33_,$@)" ] ; then \ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ - $(XECHO) "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ - $(XECHO) " slave" ; \ - else \ - $(XECHO) " host" ; \ fi - @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval + @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
@@ -2452,9 +2300,8 @@ MPC8541CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale + @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
@@ -2464,18 +2311,16 @@ MPC8548CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale + @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale + @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
@@ -2483,15 +2328,15 @@ MPC8568MDS_config: unconfig MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale P1011RDB_config \ P1011RDB_NAND_config \
@@ -2509,7 +2354,7 @@ P2020RDB_config \ P2020RDB_NAND_config \ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
@@ -2520,19 +2365,19 @@ PM856_config: unconfig sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 sbc8548_config \ sbc8548_PCI_33_config \ sbc8548_PCI_66_config \ sbc8548_PCI_33_PCIE_config \ sbc8548_PCI_66_PCIE_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 socrates_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
@@ -2545,9 +2390,8 @@ stxssa_4M_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _4M_,$@)" ] ; then \ echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ - $(XECHO) "... with 4 MiB flash memory" ; \ fi - @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx + @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx TQM8540_config \ TQM8541_config \
@@ -2559,13 +2403,12 @@ TQM8560_config: unconfig @mkdir -p $(obj)include @BTYPE=$(@:_config=); \ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ - $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; - @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; + @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc XPEDITE5200_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
@@ -2585,9 +2428,8 @@ MPC8641HPCN_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _36BIT_,$@)" ] ; then \ echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ - $(XECHO) "... enabling 36-bit physical addressing." ; \ fi - @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale + @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
@@ -2619,7 +2461,7 @@ ELPPC_config: unconfig EVB64260_config \ EVB64260_750CX_config: unconfig - @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260 + @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
@@ -2635,11 +2477,11 @@ p3m7448_config: unconfig else \ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ fi - @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive + @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive PCIPPC2_config \ PCIPPC6_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2 + @$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2 ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
@@ -2693,7 +2535,7 @@ CPUAT91_RAM_config \ CPUAT91_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 + @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 csb637_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
@@ -2731,21 +2573,17 @@ at91sam9g20ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g20,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G20 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9xeek_nandflash_config \ at91sam9xeek_dataflash_cs0_config \
@@ -2754,15 +2592,12 @@ at91sam9xeek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \
@@ -2775,21 +2610,17 @@ at91sam9g10ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G10 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 at91sam9263ek_norflash_config \ at91sam9263ek_norflash_boot_config \
@@ -2800,19 +2631,15 @@ at91sam9263ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring norflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NOR FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; @if [ "$(findstring norflash_boot,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... and boot from NOR FLASH" ; \ fi; - @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \
@@ -2821,12 +2648,10 @@ at91sam9rlek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 CPU9G20_128M_config \ CPU9G20_config \
@@ -2834,7 +2659,7 @@ CPU9260_128M_config \ CPU9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91 + @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 meesc_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
@@ -2853,19 +2678,15 @@ at91sam9g45ekes_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9m10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9M10G45 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ fi; - @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 otc570_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
@@ -2878,7 +2699,7 @@ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 + @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 TNY_A9G20_NANDFLASH_config \ TNY_A9G20_EEPROM_config \
@@ -2888,7 +2709,7 @@ TNY_A9260_EEPROM_config \ TNY_A9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 + @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2916,32 +2737,17 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ -da830evm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - -davinci_dm355evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci - -davinci_dm355leopard_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci - -davinci_dm365evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci - -davinci_dm6467evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +da830evm_config \ +davinci_dvevm_config \ +davinci_schmoogie_config \ +davinci_sffsdr_config \ +davinci_sonata_config \ +davinci_dm355evm_config \ +davinci_dm355leopard_config \ +davinci_dm365evm_config \ +davinci_dm6467evm_config : unconfig + @$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \ + $(subst davinci_,,$(@:_config=)) davinci davinci guruplug_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2952,7 +2758,7 @@ imx27lite_config: unconfig lpd7a400_config \ lpd7a404_config: unconfig - @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x mv88f6281gtw_ge_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2972,11 +2778,8 @@ nhk8815_onenand_config: unconfig @ > $(obj)include/config.h @if [ "$(findstring _onenand, $@)" ] ; then \ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - $(XECHO) "... configured to boot from OneNand Flash"; \ - else \ - $(XECHO) "... configured to boot from Nand Flash"; \ fi - @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik + @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
@@ -2994,15 +2797,12 @@ omap1610h2_cs_autoboot_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS_AUTO boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
@@ -3018,12 +2818,10 @@ omap730p2_cs3boot_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap rd6281a_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -3059,12 +2857,10 @@ SX1_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout serial"; \ else \ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout usbtty"; \ fi; - @$(MKCONFIG) SX1 arm arm925t sx1 + @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
@@ -3078,25 +2874,22 @@ trab_old_config: unconfig @[ -z "$(findstring _bigram,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 tx25_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
@@ -3233,9 +3026,8 @@ scpu_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring scpu_,$@)" ] ; then \ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ - $(XECHO) "... on SCPU board variant" ; \ fi - @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive + @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
@@ -3246,7 +3038,7 @@ trizepsiv_config : unconfig @if [ "$(findstring polaris,$@)" ] ; then \ echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ fi; - @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv + @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250
@@ -3270,8 +3062,8 @@ zylonite_config : apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx imx31_litekit_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
@@ -3282,7 +3074,7 @@ imx31_phycore_config : unconfig @if [ -n "$(findstring _eet_,$@)" ]; then \ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
@@ -3296,7 +3088,7 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 + @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 mx51evk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
@@ -3315,14 +3107,13 @@ smdk6400_config : unconfig @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ else \ echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ fi - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(subst _noUSB,,$(@:_config=)) arm arm1176 smdk6400 samsung s3c64xx #======================================================================== # i386
@@ -3349,26 +3140,18 @@ sc520_spunk_rel_config : unconfig ## MIPS32 4Kc ######################################################################### -xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) - incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h @[ -z "$(findstring _133MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 133MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h @[ -z "$(findstring _150MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 150MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip + echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a incaip mips mips incaip tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229
@@ -3386,27 +3169,17 @@ vct_platinumavc_small_config \ vct_platinumavc_onenand_config \ vct_platinumavc_onenand_small_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _premium,$@)" ] ; then \ - echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Premium board variant" ; \ - fi - @if [ "$(findstring _platinum_,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Platinum board variant" ; \ - fi - @if [ "$(findstring _platinumavc,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ - $(XECHO) "... on PlatinumAVC board variant" ; \ - fi - @if [ "$(findstring _onenand,$@)" ] ; then \ - echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ - $(XECHO) "... on OneNAND board variant" ; \ - fi - @if [ "$(findstring _small,$@)" ] ; then \ - echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ - $(XECHO) "... stripped down image variant" ; \ - fi - @$(MKCONFIG) -a vct mips mips vct micronas + @[ -z "$(findstring _premium,$@)" ] || \ + echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h + @[ -z "$(findstring _platinum_,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h + @[ -z "$(findstring _platinumavc,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h + @[ -z "$(findstring _onenand,$@)" ] || \ + echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h + @[ -z "$(findstring _small,$@)" ] || \ + echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a vct mips mips vct micronas ######################################################################### ## MIPS32 AU1X00
@@ -3471,36 +3244,24 @@ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ - $(XECHO) "... DNP/EVA2 configuration" ; \ - } + echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv + echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a ADNPESC1 nios nios adnpesc1 ssv DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'safe_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h @[ -z "$(findstring DK1C20_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \
@@ -3508,22 +3269,14 @@ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'safe_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ - { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ - } + echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h @[ -z "$(findstring DK1S10_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a DK1S10 nios nios dk1s10 altera ######################################################################### ## Nios-II
@@ -3590,15 +3343,9 @@ bf527-ezkit-v2_config : unconfig atngw100_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x -atstk1002_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1003_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1004_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - +atstk1002_config \ +atstk1003_config \ +atstk1004_config \ atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
@@ -3681,9 +3428,8 @@ sh7785lcr_config : unconfig echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ - $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ fi - @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas + @$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include
Signature · 1 line
1.6.6.1
PATCH 2/3 Makefile: simplify handling of build target names
In reply to Wolfgang DenkInstead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string.
This prepares the ground for forther simplification of the top level Makefile.
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 774 ++++++++++++++++++++++++++++++-------------------------------- mkconfig | 4 +- 2 files changed, 379 insertions(+), 399 deletions(-)
Makefile +377 -397
@@ -486,30 +486,30 @@ unconfig: ## MPC5xx Systems ######################################################################### -canmb_config: unconfig - @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb - cmi_mpc5xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi + @$(MKCONFIG) $@ powerpc mpc5xx cmi PATI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl + @$(MKCONFIG) $@ powerpc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig - @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc BC3450_config: unconfig - @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450 + @$(MKCONFIG) $@ powerpc mpc5xxx bc3450 + +canmb_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx canmb cm5200_config: unconfig - @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200 + @$(MKCONFIG) $@ powerpc mpc5xxx cm5200 cpci5200_config: unconfig - @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx cpci5200 esd digsy_mtc_config \ digsy_mtc_LOWBOOT_config \
@@ -521,7 +521,7 @@ digsy_mtc_RAMBOOT_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp @[ -z "$(findstring RAMBOOT_,$@)" ] || \ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp - @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc + @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc galaxy5200_LOWBOOT_config \ galaxy5200_config: unconfig
@@ -530,7 +530,7 @@ galaxy5200_config: unconfig @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 hmi1001_config: unconfig - @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001 + @$(MKCONFIG) $@ powerpc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \
@@ -555,13 +555,13 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube jupiter_config: unconfig - @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter + @$(MKCONFIG) $@ powerpc mpc5xxx jupiter inka4x0_config: unconfig - @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0 + @$(MKCONFIG) $@ powerpc mpc5xxx inka4x0 ipek01_config: unconfig - @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01 + @$(MKCONFIG) $@ powerpc mpc5xxx ipek01 lite5200b_config \ lite5200b_PM_config \
@@ -609,16 +609,16 @@ prs200_highboot_DDR_config: unconfig @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 mecp5200_config: unconfig - @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx mecp5200 esd motionpro_config: unconfig - @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro + @$(MKCONFIG) $@ powerpc mpc5xxx motionpro mucmc52_config: unconfig - @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52 + @$(MKCONFIG) $@ powerpc mpc5xxx mucmc52 munices_config: unconfig - @$(MKCONFIG) munices powerpc mpc5xxx munices + @$(MKCONFIG) $@ powerpc mpc5xxx munices MVBC_P_config: unconfig @mkdir -p $(obj)include
@@ -626,15 +626,15 @@ MVBC_P_config: unconfig @ >$(obj)include/config.h @[ -z "$(findstring MVBC_P,$@)" ] || \ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision + @$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision MVSMR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/matrix_vision/mvsmr - @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision + @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision o2dnt_config: unconfig - @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt + @$(MKCONFIG) $@ powerpc mpc5xxx o2dnt pcm030_config \ pcm030_LOWBOOT_config: unconfig
@@ -645,7 +645,7 @@ pcm030_LOWBOOT_config: unconfig @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec pf5200_config: unconfig - @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \
@@ -659,10 +659,10 @@ PM520_ROMBOOT_DDR_config: unconfig @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 smmaco4_config: unconfig - @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc spieval_config: unconfig - @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc TB5200_B_config \ TB5200_config: unconfig
@@ -728,20 +728,20 @@ TQM5200_STK100_config: unconfig @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc uc101_config: unconfig - @$(MKCONFIG) uc101 powerpc mpc5xxx uc101 + @$(MKCONFIG) $@ powerpc mpc5xxx uc101 v38b_config: unconfig - @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b + @$(MKCONFIG) $@ powerpc mpc5xxx v38b ######################################################################### ## MPC512x Systems ######################################################################### aria_config: unconfig - @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx + @$(MKCONFIG) $@ powerpc mpc512x aria davedenx mecp5123_config: unconfig - @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd + @$(MKCONFIG) $@ powerpc mpc512x mecp5123 esd mpc5121ads_config \ mpc5121ads_rev2_config \
@@ -753,7 +753,7 @@ mpc5121ads_rev2_config \ @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale pdm360ng_config: unconfig - @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng + @$(MKCONFIG) $@ powerpc mpc512x pdm360ng ######################################################################### ## MPC8xx Systems
@@ -775,70 +775,66 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads + @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads AMX860_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel + @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel c2mon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon + @$(MKCONFIG) $@ powerpc mpc8xx c2mon CCM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens + @$(MKCONFIG) $@ powerpc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent + @$(MKCONFIG) $@ powerpc mpc8xx cogent ELPT860_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX + @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX EP88x_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x + @$(MKCONFIG) $@ powerpc mpc8xx ep88x ESTEEM192E_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e + @$(MKCONFIG) $@ powerpc mpc8xx esteem192e ETX094_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094 + @$(MKCONFIG) $@ powerpc mpc8xx etx094 FLAGADM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm - -xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx flagadm GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ echo "#define CONFIG_SC" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t + @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t GENIETV_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv + @$(MKCONFIG) $@ powerpc mpc8xx genietv GTH_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth + @$(MKCONFIG) $@ powerpc mpc8xx gth hermes_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes + @$(MKCONFIG) $@ powerpc mpc8xx hermes HMI10_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc IAD210_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens - -xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx IAD210 siemens ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ echo "#define CONFIG_100MHz" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 + @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862 IP860_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860 + @$(MKCONFIG) $@ powerpc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \
@@ -865,31 +861,29 @@ IVMS8_config: unconfig @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm kmsupx4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile KUP4K_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup + @$(MKCONFIG) $@ powerpc mpc8xx kup4k kup KUP4X_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup + @$(MKCONFIG) $@ powerpc mpc8xx kup4x kup LANTEC_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec + @$(MKCONFIG) $@ powerpc mpc8xx lantec lwmon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon + @$(MKCONFIG) $@ powerpc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx + @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx mgsuvd_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile MHPC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec - -xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec NETVIA_V2_config \ NETVIA_config: unconfig
@@ -898,9 +892,7 @@ NETVIA_config: unconfig echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia - -xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia NETPHONE_V2_config \ NETPHONE_config: unconfig
@@ -909,9 +901,7 @@ NETPHONE_config: unconfig echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone - -xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) + @$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone NETTA_ISDN_6412_SWAPHOOK_config \ NETTA_ISDN_SWAPHOOK_config \
@@ -934,9 +924,7 @@ NETTA_config: unconfig echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta - -xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta NETTA2_V2_config \ NETTA2_config: unconfig
@@ -945,7 +933,7 @@ NETTA2_config: unconfig echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 + @$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \
@@ -964,34 +952,34 @@ CP850_config: unconfig @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 NX823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823 + @$(MKCONFIG) $@ powerpc mpc8xx nx823 pcu_e_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens + @$(MKCONFIG) $@ powerpc mpc8xx pcu_e siemens QS850_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc QS823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc QS860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc quantum_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum + @$(MKCONFIG) $@ powerpc mpc8xx quantum R360MPI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi + @$(MKCONFIG) $@ powerpc mpc8xx r360mpi RBC823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823 + @$(MKCONFIG) $@ powerpc mpc8xx rbc823 RPXClassic_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic + @$(MKCONFIG) $@ powerpc mpc8xx RPXClassic RPXlite_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite + @$(MKCONFIG) $@ powerpc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \
@@ -1013,10 +1001,10 @@ RPXlite_DW_config: unconfig @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw rmu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu + @$(MKCONFIG) $@ powerpc mpc8xx rmu RRvision_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision + @$(MKCONFIG) $@ powerpc mpc8xx RRvision RRvision_LCD_config: unconfig @mkdir -p $(obj)include
@@ -1025,31 +1013,31 @@ RRvision_LCD_config: unconfig @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision SM850_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc spc1920_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920 + @$(MKCONFIG) $@ powerpc mpc8xx spc1920 SPD823TS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx + @$(MKCONFIG) $@ powerpc mpc8xx spd8xx stxxtc_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx + @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx svm_sc8xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx + @$(MKCONFIG) $@ powerpc mpc8xx svm_sc8xx SXNI855T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet + @$(MKCONFIG) $@ powerpc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk + @$(MKCONFIG) $@ powerpc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support -xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) +xtract_8xx = $(subst _LCD,,$1) FPS850L_config \ FPS860L_config \
@@ -1083,13 +1071,13 @@ TTTech_config: unconfig @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc uc100_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100 + @$(MKCONFIG) $@ powerpc mpc8xx uc100 v37_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37 + @$(MKCONFIG) $@ powerpc mpc8xx v37 wtk_config: unconfig @mkdir -p $(obj)include
@@ -1100,53 +1088,52 @@ wtk_config: unconfig ######################################################################### ## PPC4xx Systems ######################################################################### -xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) acadia_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc + @$(MKCONFIG) $@ powerpc ppc4xx acadia amcc acadia_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/acadia @mkdir -p $(obj)nand_spl/board/amcc/acadia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc ADCIOP_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd + @$(MKCONFIG) $@ powerpc ppc4xx adciop esd alpr_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive + @$(MKCONFIG) $@ powerpc ppc4xx alpr prodrive AP1000_config:unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix + @$(MKCONFIG) $@ powerpc ppc4xx ap1000 amirix APC405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd + @$(MKCONFIG) $@ powerpc ppc4xx apc405 esd AR405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd + @$(MKCONFIG) $@ powerpc ppc4xx ar405 esd ASH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd + @$(MKCONFIG) $@ powerpc ppc4xx ash405 esd bamboo_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc + @$(MKCONFIG) $@ powerpc ppc4xx bamboo amcc bamboo_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/bamboo @mkdir -p $(obj)nand_spl/board/amcc/bamboo @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc bubinga_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc + @$(MKCONFIG) $@ powerpc ppc4xx bubinga amcc CANBT_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd + @$(MKCONFIG) $@ powerpc ppc4xx canbt esd # Arches, Canyonlands & Glacier use different U-Boot images arches_config \
@@ -1178,53 +1165,53 @@ CATcenter_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave CMS700_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd + @$(MKCONFIG) $@ powerpc ppc4xx cms700 esd CPCI2DP_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd + @$(MKCONFIG) $@ powerpc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd + @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd CPCIISER4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd + @$(MKCONFIG) $@ powerpc ppc4xx cpciiser4 esd CRAYL1_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray + @$(MKCONFIG) $@ powerpc ppc4xx L1 cray csb272_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272 + @$(MKCONFIG) $@ powerpc ppc4xx csb272 csb472_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472 + @$(MKCONFIG) $@ powerpc ppc4xx csb472 DASA_SIM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd + @$(MKCONFIG) $@ powerpc ppc4xx dasa_sim esd dlvision_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys + @$(MKCONFIG) $@ powerpc ppc4xx dlvision gdsys DP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd + @$(MKCONFIG) $@ powerpc ppc4xx dp405 esd DU405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd + @$(MKCONFIG) $@ powerpc ppc4xx du405 esd DU440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd + @$(MKCONFIG) $@ powerpc ppc4xx du440 esd ebony_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc + @$(MKCONFIG) $@ powerpc ppc4xx ebony amcc ERIC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric + @$(MKCONFIG) $@ powerpc ppc4xx eric fx12mm_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@@ -1245,27 +1232,27 @@ fx12mm_config: unconfig @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet G2000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000 + @$(MKCONFIG) $@ powerpc ppc4xx g2000 gdppc440etx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys + @$(MKCONFIG) $@ powerpc ppc4xx gdppc440etx gdsys hcu4_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal + @$(MKCONFIG) $@ powerpc ppc4xx hcu4 netstal hcu5_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal + @$(MKCONFIG) $@ powerpc ppc4xx hcu5 netstal HH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx hh405 esd HUB405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd + @$(MKCONFIG) $@ powerpc ppc4xx hub405 esd icon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech + @$(MKCONFIG) $@ powerpc ppc4xx icon mosaixtech # Compact-Center(codename intip) & DevCon-Center use different U-Boot images intip_config \
@@ -1276,18 +1263,18 @@ devconcenter_config: unconfig @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys JSE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse + @$(MKCONFIG) $@ powerpc ppc4xx jse KAREF_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst + @$(MKCONFIG) $@ powerpc ppc4xx karef sandburst katmai_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc + @$(MKCONFIG) $@ powerpc ppc4xx katmai amcc # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig - @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc + @$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc kilauea_nand_config \ haleakala_nand_config: unconfig
@@ -1299,26 +1286,26 @@ haleakala_nand_config: unconfig @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc korat_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat + @$(MKCONFIG) $@ powerpc ppc4xx korat luan_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc + @$(MKCONFIG) $@ powerpc ppc4xx luan amcc lwmon5_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5 + @$(MKCONFIG) $@ powerpc ppc4xx lwmon5 makalu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc + @$(MKCONFIG) $@ powerpc ppc4xx makalu amcc mcu25_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal + @$(MKCONFIG) $@ powerpc ppc4xx mcu25 netstal METROBOX_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst + @$(MKCONFIG) $@ powerpc ppc4xx metrobox sandburst MIP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl + @$(MKCONFIG) $@ powerpc ppc4xx mip405 mpl MIP405T_config: unconfig @mkdir -p $(obj)include
@@ -1327,7 +1314,7 @@ MIP405T_config: unconfig @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl ML2_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2 + @$(MKCONFIG) $@ powerpc ppc4xx ml2 ml507_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1345,41 +1332,41 @@ ml507_config: unconfig > $(obj)board/xilinx/ml507/config.tmp @echo "TEXT_BASE := 0x04000000" \ >> $(obj)board/xilinx/ml507/config.tmp - @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx + @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx neo_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys + @$(MKCONFIG) $@ powerpc ppc4xx neo gdsys ocotea_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc + @$(MKCONFIG) $@ powerpc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd + @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd p3p440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive + @$(MKCONFIG) $@ powerpc ppc4xx p3p440 prodrive PCI405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd + @$(MKCONFIG) $@ powerpc ppc4xx pci405 esd pcs440ep_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep + @$(MKCONFIG) $@ powerpc ppc4xx pcs440ep PIP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl + @$(MKCONFIG) $@ powerpc ppc4xx pip405 mpl PLU405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd + @$(MKCONFIG) $@ powerpc ppc4xx plu405 esd PMC405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc405 esd PMC405DE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc405de esd PMC440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc440 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \
@@ -1399,19 +1386,19 @@ PPChameleonEVB_HI_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd + @$(MKCONFIG) $@ powerpc ppc4xx quad100hd redwood_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc + @$(MKCONFIG) $@ powerpc ppc4xx redwood amcc sbc405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405 + @$(MKCONFIG) $@ powerpc ppc4xx sbc405 sc3_config:unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3 + @$(MKCONFIG) $@ powerpc ppc4xx sc3 sequoia_config \ rainier_config: unconfig
@@ -1443,10 +1430,10 @@ rainier_ramboot_config: unconfig @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc taihu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc + @$(MKCONFIG) $@ powerpc ppc4xx taihu amcc taishan_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc + @$(MKCONFIG) $@ powerpc ppc4xx taishan amcc v5fx30teval_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1455,7 +1442,7 @@ v5fx30teval_config: unconfig > $(obj)board/avnet/v5fx30teval/config.tmp @echo "TEXT_BASE := 0x03000000" \ >> $(obj)board/avnet/v5fx30teval/config.tmp - @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet + @$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet v5fx30teval_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1467,22 +1454,22 @@ v5fx30teval_flash_config: unconfig @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet VOH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx voh405 esd VOM405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd + @$(MKCONFIG) $@ powerpc ppc4xx vom405 esd W7OLMC_config \ W7OLMG_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o + @$(MKCONFIG) $@ powerpc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \ sycamore_config: unconfig - @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc + @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc WUH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx wuh405 esd xilinx-ppc405-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@@ -1517,7 +1504,7 @@ xilinx-ppc440-generic_config: unconfig @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx XPEDITE1000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes + @$(MKCONFIG) $@ powerpc ppc4xx xpedite1000 xes yosemite_config \ yellowstone_config: unconfig
@@ -1527,10 +1514,10 @@ yellowstone_config: unconfig @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc yucca_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc + @$(MKCONFIG) $@ powerpc ppc4xx yucca amcc zeus_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus + @$(MKCONFIG) $@ powerpc ppc4xx zeus ######################################################################### ## MPC8220 Systems
@@ -1538,24 +1525,23 @@ zeus_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska + @$(MKCONFIG) $@ powerpc mpc8220 alaska sorcery_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery + @$(MKCONFIG) $@ powerpc mpc8220 sorcery ######################################################################### ## MPC824x Systems ######################################################################### -xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000 + @$(MKCONFIG) $@ powerpc mpc824x a3000 barco_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco + @$(MKCONFIG) $@ powerpc mpc824x barco BMW_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw + @$(MKCONFIG) $@ powerpc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig
@@ -1566,22 +1552,22 @@ CPC45_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45 + @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45 CU824_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824 + @$(MKCONFIG) $@ powerpc mpc824x cu824 debris_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin + @$(MKCONFIG) $@ powerpc mpc824x debris etin eXalion_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion + @$(MKCONFIG) $@ powerpc mpc824x eXalion HIDDEN_DRAGON_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon + @$(MKCONFIG) $@ powerpc mpc824x hidden_dragon kvme080_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin + @$(MKCONFIG) $@ powerpc mpc824x kvme080 etin # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as # time permits.
@@ -1596,41 +1582,41 @@ linkstation_HGLAN_config: unconfig @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation MOUSSE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse + @$(MKCONFIG) $@ powerpc mpc824x mousse MUSENKI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki + @$(MKCONFIG) $@ powerpc mpc824x musenki MVBLUE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue + @$(MKCONFIG) $@ powerpc mpc824x mvblue OXC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc + @$(MKCONFIG) $@ powerpc mpc824x oxc PN62_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62 + @$(MKCONFIG) $@ powerpc mpc824x pn62 Sandpoint8240_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint + @$(MKCONFIG) $@ powerpc mpc824x sandpoint Sandpoint8245_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint + @$(MKCONFIG) $@ powerpc mpc824x sandpoint sbc8240_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240 + @$(MKCONFIG) $@ powerpc mpc824x sbc8240 utx8245_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245 + @$(MKCONFIG) $@ powerpc mpc824x utx8245 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc + @$(MKCONFIG) $@ powerpc mpc8260 atc cogent_mpc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent + @$(MKCONFIG) $@ powerpc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig
@@ -1641,7 +1627,7 @@ CPU86_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86 + @$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86 CPU87_config \ CPU87_ROMBOOT_config: unconfig
@@ -1652,29 +1638,29 @@ CPU87_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87 + @$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87 ep8248_config \ ep8248E_config : unconfig @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 ep8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260 + @$(MKCONFIG) $@ powerpc mpc8260 ep8260 ep82xxm_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm + @$(MKCONFIG) $@ powerpc mpc8260 ep82xxm gw8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260 + @$(MKCONFIG) $@ powerpc mpc8260 gw8260 hymod_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod + @$(MKCONFIG) $@ powerpc mpc8260 hymod IDS8247_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247 + @$(MKCONFIG) $@ powerpc mpc8260 ids8247 IPHASE4539_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539 + @$(MKCONFIG) $@ powerpc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig
@@ -1685,7 +1671,7 @@ ISPAN_REVB_config: unconfig @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan mgcoge_config : unconfig - @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile + @$(MKCONFIG) $@ powerpc mpc8260 mgcoge keymile MPC8260ADS_config \ MPC8260ADS_lowboot_config \
@@ -1718,7 +1704,7 @@ PQ2FADS-ZU_66MHz_lowboot_config \ @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale + @$(MKCONFIG) $@ powerpc mpc8260 mpc8266ads freescale muas3001_dev_config \ muas3001_config : unconfig
@@ -1778,7 +1764,7 @@ PM828_ROMBOOT_PCI_config: unconfig @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 ppmc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260 + @$(MKCONFIG) $@ powerpc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig
@@ -1788,19 +1774,19 @@ Rattler_config: unconfig @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler RPXsuper_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper + @$(MKCONFIG) $@ powerpc mpc8260 rpxsuper rsdproto_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto + @$(MKCONFIG) $@ powerpc mpc8260 rsdproto sacsng_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng + @$(MKCONFIG) $@ powerpc mpc8260 sacsng sbc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260 + @$(MKCONFIG) $@ powerpc mpc8260 sbc8260 SCM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens + @$(MKCONFIG) $@ powerpc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \
@@ -1853,7 +1839,7 @@ VoVPN-GW_100MHz_config: unconfig @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900 + @$(MKCONFIG) $@ powerpc mpc8260 zpc1900 ######################################################################### ## Coldfire
@@ -1861,10 +1847,10 @@ ZPC1900_config: unconfig astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro M5208EVBE_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5208evbe freescale M52277EVB_config \ M52277EVB_spansion_config \
@@ -1906,16 +1892,16 @@ M5235EVB_Flash32_config: unconfig @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5249evb freescale M5253DEMO_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5253demo freescale M5253EVBE_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5253evbe freescale cobra5272_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 + @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include
@@ -1930,25 +1916,25 @@ EB+MCF-EV123_internal_config : unconfig @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EP2500_config: unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury + @$(MKCONFIG) $@ m68k mcf52x2 ep2500 Mercury idmr_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr + @$(MKCONFIG) $@ m68k mcf52x2 idmr M5271EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5271evb freescale M5272C3_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5272c3 freescale M5275EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5275evb freescale M5282EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5282evb freescale M53017EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale + @$(MKCONFIG) $@ m68k mcf532x m53017evb freescale M5329AFEE_config \ M5329BFEE_config : unconfig
@@ -2095,7 +2081,7 @@ M5485HFE_config : unconfig @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale TASREG_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd + @$(MKCONFIG) $@ m68k mcf52x2 tasreg esd ######################################################################### ## MPC83xx Systems
@@ -2127,10 +2113,10 @@ MPC8313ERDB_NAND_66_config: unconfig MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale + @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig - @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc8323erdb freescale MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \
@@ -2160,7 +2146,7 @@ MPC832XEMDS_ATM_config: unconfig @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \
@@ -2221,15 +2207,15 @@ MPC837XEMDS_HOST_config: unconfig @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig - @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc837xerdb freescale MVBLM7_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision + @$(MKCONFIG) $@ powerpc mpc83xx mvblm7 matrix_vision sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 + @$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig
@@ -2245,11 +2231,11 @@ SIMPC8313_SP_config: unconfig @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon TQM834x_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc + @$(MKCONFIG) $@ powerpc mpc83xx tqm834x tqc caddy2_config \ vme8349_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd + @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd edb9301_config \ edb9302_config \
@@ -2259,24 +2245,24 @@ edb9307a_config \ edb9312_config \ edb9315_config \ edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx + @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx ######################################################################### ## MPC85xx Systems ######################################################################### ATUM8548_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548 + @$(MKCONFIG) $@ powerpc mpc85xx atum8548 MPC8536DS_NAND_config \ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8540ads freescale MPC8540EVAL_config \ MPC8540EVAL_33_config \
@@ -2293,7 +2279,7 @@ MPC8540EVAL_66_slave_config: unconfig @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval MPC8560ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8560ads freescale MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig
@@ -2304,7 +2290,7 @@ MPC8541CDS_config: unconfig @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8544ds freescale MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig
@@ -2323,20 +2309,20 @@ MPC8555CDS_config: unconfig @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8568mds freescale MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale + @$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale P1011RDB_config \ P1011RDB_NAND_config \
@@ -2354,36 +2340,36 @@ P2020RDB_config \ P2020RDB_NAND_config \ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale PM854_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854 + @$(MKCONFIG) $@ powerpc mpc85xx pm854 PM856_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856 + @$(MKCONFIG) $@ powerpc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560 sbc8548_config \ sbc8548_PCI_33_config \ sbc8548_PCI_66_config \ sbc8548_PCI_33_PCIE_config \ sbc8548_PCI_66_PCIE_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 + @$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560 socrates_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates + @$(MKCONFIG) $@ powerpc mpc85xx socrates stxgp3_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx + @$(MKCONFIG) $@ powerpc mpc85xx stxgp3 stx stxssa_config \ stxssa_4M_config: unconfig
@@ -2411,17 +2397,17 @@ TQM8560_config: unconfig @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc XPEDITE5200_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes + @$(MKCONFIG) $@ powerpc mpc85xx xpedite5200 xes XPEDITE5370_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes + @$(MKCONFIG) $@ powerpc mpc85xx xpedite5370 xes ######################################################################### ## MPC86xx Systems ######################################################################### MPC8610HPCD_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale + @$(MKCONFIG) $@ powerpc mpc86xx mpc8610hpcd freescale MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig
@@ -2432,42 +2418,42 @@ MPC8641HPCN_config: unconfig @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d + @$(MKCONFIG) $@ powerpc mpc86xx sbc8641d XPEDITE5170_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes + @$(MKCONFIG) $@ powerpc mpc86xx xpedite5170 xes ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI + @$(MKCONFIG) $@ powerpc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec + @$(MKCONFIG) $@ powerpc 74xx_7xx bab7xx eltec CPCI750_config: unconfig - @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd + @$(MKCONFIG) $@ powerpc 74xx_7xx cpci750 esd DB64360_config: unconfig - @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx db64360 Marvell DB64460_config: unconfig - @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx db64460 Marvell ELPPC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec + @$(MKCONFIG) $@ powerpc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale + @$(MKCONFIG) $@ powerpc 74xx_7xx mpc7448hpc2 freescale P3G4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 + @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 p3m750_config \ p3m7448_config: unconfig
@@ -2481,13 +2467,13 @@ p3m7448_config: unconfig PCIPPC2_config \ PCIPPC6_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2 + @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 ppmc7xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx + @$(MKCONFIG) $@ powerpc 74xx_7xx ppmc7xx ZUMA_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 + @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 #======================================================================== # ARM
@@ -2497,39 +2483,39 @@ ZUMA_config: unconfig ######################################################################### assabet_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 assabet + @$(MKCONFIG) $@ arm sa1100 assabet dnp1110_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 + @$(MKCONFIG) $@ arm sa1100 dnp1110 gcplus_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus + @$(MKCONFIG) $@ arm sa1100 gcplus lart_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 lart + @$(MKCONFIG) $@ arm sa1100 lart shannon_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 shannon + @$(MKCONFIG) $@ arm sa1100 shannon ######################################################################### ## ARM92xT Systems ######################################################################### a320evb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320 + @$(MKCONFIG) $@ arm arm920t a320evb faraday a320 ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### at91rm9200dk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t at91rm9200dk atmel at91rm9200 at91rm9200ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t at91rm9200ek atmel at91rm9200 cmc_pu2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t cmc_pu2 NULL at91rm9200 CPUAT91_RAM_config \ CPUAT91_config : unconfig
@@ -2538,29 +2524,29 @@ CPUAT91_config : unconfig @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 csb637_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t csb637 NULL at91rm9200 eb_cpux9k2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91 + @$(MKCONFIG) $@ arm arm920t eb_cpux9k2 BuS at91 kb9202_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t kb9202 NULL at91rm9200 m501sk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t m501sk NULL at91rm9200 mp2usb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t mp2usb NULL at91rm9200 ######################################################################### ## ARM926EJ-S Systems ######################################################################### afeb9260_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 + @$(MKCONFIG) $@ arm arm926ejs afeb9260 NULL at91 at91cap9adk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 + @$(MKCONFIG) $@ arm arm926ejs at91cap9adk atmel at91 at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \
@@ -2662,10 +2648,10 @@ CPU9260_config : unconfig @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 meesc_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + @$(MKCONFIG) $@ arm arm926ejs meesc esd at91 pm9261_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 + @$(MKCONFIG) $@ arm arm926ejs pm9261 ronetix at91 at91sam9m10g45ek_nandflash_config \ at91sam9m10g45ek_dataflash_config \
@@ -2689,10 +2675,10 @@ at91sam9g45ekes_config : unconfig @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 otc570_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91 + @$(MKCONFIG) $@ arm arm926ejs otc570 esd at91 pm9263_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 + @$(MKCONFIG) $@ arm arm926ejs pm9263 ronetix at91 SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \
@@ -2746,31 +2732,31 @@ davinci_dm355evm_config \ davinci_dm355leopard_config \ davinci_dm365evm_config \ davinci_dm6467evm_config : unconfig - @$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \ + @$(MKCONFIG) -n $@ $@ arm arm926ejs \ $(subst davinci_,,$(@:_config=)) davinci davinci guruplug_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood magnesium_config \ imx27lite_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 + @$(MKCONFIG) $@ arm arm926ejs imx27lite logicpd mx27 lpd7a400_config \ lpd7a404_config: unconfig - @$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) $@ arm lh7a40x lpd7a40x mv88f6281gtw_ge_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood mx1ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx + @$(MKCONFIG) $@ arm arm920t mx1ads NULL imx mx1fs2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx + @$(MKCONFIG) $@ arm arm920t mx1fs2 NULL imx netstar_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t netstar + @$(MKCONFIG) $@ arm arm925t netstar nhk8815_config \ nhk8815_onenand_config: unconfig
@@ -2782,7 +2768,7 @@ nhk8815_onenand_config: unconfig @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti + @$(MKCONFIG) $@ arm arm925t omap1510inn ti xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
@@ -2805,12 +2791,10 @@ omap1610h2_cs_autoboot_config: unconfig @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap omap5912osk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap + @$(MKCONFIG) $@ arm arm926ejs omap5912osk ti omap openrd_base_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood - -xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood omap730p2_config \ omap730p2_cs0boot_config \
@@ -2821,36 +2805,36 @@ omap730p2_cs3boot_config : unconfig else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ fi; - @$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap + @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap rd6281a_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + @$(MKCONFIG) $@ arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx + @$(MKCONFIG) $@ arm arm920t scb9328 NULL imx sheevaplug_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood smdk2400_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 + @$(MKCONFIG) $@ arm arm920t smdk2400 samsung s3c24x0 smdk2410_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 + @$(MKCONFIG) $@ arm arm920t smdk2410 samsung s3c24x0 spear300_config \ spear310_config \ spear320_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear spear600_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear suen3_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood + @$(MKCONFIG) $@ arm arm926ejs km_arm keymile kirkwood SX1_stdout_serial_config \ SX1_config: unconfig
@@ -2863,8 +2847,6 @@ SX1_config: unconfig @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM -xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) - trab_config \ trab_bigram_config \ trab_bigflash_config \
@@ -2885,24 +2867,24 @@ trab_old_config: unconfig echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a trab arm arm920t trab NULL s3c24x0 tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 + @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 VCMA9_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 + @$(MKCONFIG) $@ arm arm920t vcma9 mpl s3c24x0 ######################################################################### # ARM supplied Versatile development boards ######################################################################### cm4008_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 + @$(MKCONFIG) $@ arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + @$(MKCONFIG) $@ arm arm920t cm41xx NULL ks8695 versatile_config \ versatileab_config \
@@ -2910,116 +2892,116 @@ versatilepb_config : unconfig @board/armltd/versatile/split_by_variant.sh $@ voiceblue_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue + @$(MKCONFIG) $@ arm arm925t voiceblue ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave + @$(MKCONFIG) $@ arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t armadillo + @$(MKCONFIG) $@ arm arm720t armadillo ep7312_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 + @$(MKCONFIG) $@ arm arm720t ep7312 impa7_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t impa7 + @$(MKCONFIG) $@ arm arm720t impa7 modnet50_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 + @$(MKCONFIG) $@ arm arm720t modnet50 evb4510_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b + @$(MKCONFIG) $@ arm arm720t evb4510 NULL s3c4510b lpc2292sodimm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 + @$(MKCONFIG) $@ arm arm720t lpc2292sodimm NULL lpc2292 SMN42_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 + @$(MKCONFIG) $@ arm arm720t SMN42 siemens lpc2292 ######################################################################### ## ARM CORTEX Systems ######################################################################### devkit8000_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 devkit8000 timll omap3 omap3_beagle_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 beagle ti omap3 omap3_overo_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 overo NULL omap3 omap3_evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 evm ti omap3 omap3_pandora_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 pandora NULL omap3 omap3_sdp3430_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 sdp3430 ti omap3 omap3_zoom1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 zoom1 logicpd omap3 omap3_zoom2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 zoom2 logicpd omap3 smdkc100_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx + @$(MKCONFIG) $@ arm arm_cortexa8 smdkc100 samsung s5pc1xx ######################################################################### ## XScale Systems ######################################################################### actux1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux1 + @$(MKCONFIG) $@ arm ixp actux1 actux2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux2 + @$(MKCONFIG) $@ arm ixp actux2 actux3_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux3 + @$(MKCONFIG) $@ arm ixp actux3 actux4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux4 + @$(MKCONFIG) $@ arm ixp actux4 cerf250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa cerf250 + @$(MKCONFIG) $@ arm pxa cerf250 cradle_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa cradle + @$(MKCONFIG) $@ arm pxa cradle csb226_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa csb226 + @$(MKCONFIG) $@ arm pxa csb226 delta_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa delta + @$(MKCONFIG) $@ arm pxa delta innokom_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa innokom + @$(MKCONFIG) $@ arm pxa innokom ixdp425_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $@ arm ixp ixdp425 ixdpg425_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $@ arm ixp ixdp425 lubbock_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa lubbock + @$(MKCONFIG) $@ arm pxa lubbock pleb2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa pleb2 + @$(MKCONFIG) $@ arm pxa pleb2 logodl_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa logodl + @$(MKCONFIG) $@ arm pxa logodl pdnb3_config \ scpu_config: unconfig
@@ -3030,7 +3012,7 @@ scpu_config: unconfig @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig - @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp + @$(MKCONFIG) $@ arm pxa pxa255_idp polaris_config \ trizepsiv_config : unconfig
@@ -3041,19 +3023,19 @@ trizepsiv_config : unconfig @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa wepep250 + @$(MKCONFIG) $@ arm pxa wepep250 xaeniax_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xaeniax + @$(MKCONFIG) $@ arm pxa xaeniax xm250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xm250 + @$(MKCONFIG) $@ arm pxa xm250 xsengine_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xsengine + @$(MKCONFIG) $@ arm pxa xsengine zylonite_config : - @$(MKCONFIG) $(@:_config=) arm pxa zylonite + @$(MKCONFIG) $@ arm pxa zylonite ######################################################################### ## ARM1136 Systems
@@ -3063,10 +3045,10 @@ apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx + @$(MKCONFIG) $@ arm arm1136 apollon NULL omap24xx imx31_litekit_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 + @$(MKCONFIG) $@ arm arm1136 imx31_litekit logicpd mx31 imx31_phycore_eet_config \ imx31_phycore_config : unconfig
@@ -3077,7 +3059,7 @@ imx31_phycore_config : unconfig @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 + @$(MKCONFIG) $@ arm arm1136 mx31ads freescale mx31 mx31pdk_config \ mx31pdk_nand_config : unconfig
@@ -3091,13 +3073,13 @@ mx31pdk_nand_config : unconfig @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 mx51evk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + @$(MKCONFIG) $@ arm arm_cortexa8 mx51evk freescale mx51 omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx + @$(MKCONFIG) $@ arm arm1136 omap2420h4 ti omap24xx qong_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 + @$(MKCONFIG) $@ arm arm1136 qong davedenx mx31 ######################################################################### ## ARM1176 Systems
@@ -3122,16 +3104,16 @@ smdk6400_config : unconfig ## AMD SC520 CDP ######################################################################### eNET_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 + @$(MKCONFIG) $@ i386 i386 eNET NULL sc520 sc520_cdp_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_cdp NULL sc520 sc520_spunk_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 sc520_spunk_rel_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 #======================================================================== # MIPS
@@ -3154,7 +3136,7 @@ incaip_config: unconfig @$(MKCONFIG) -n $@ -a incaip mips mips incaip tb0229_config: unconfig - @$(MKCONFIG) $(@:_config=) mips mips tb0229 + @$(MKCONFIG) $@ mips mips tb0229 vct_premium_config \ vct_premium_small_config \
@@ -3213,7 +3195,7 @@ dbau1550_el_config : unconfig gth2_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h - @$(MKCONFIG) -a gth2 mips mips gth2 + @$(MKCONFIG) -a $@ mips mips gth2 pb1000_config : unconfig @mkdir -p $(obj)include
@@ -3230,7 +3212,7 @@ qemu_mips_config : unconfig ######################################################################### purple_config : unconfig - @$(MKCONFIG) $(@:_config=) mips mips purple + @$(MKCONFIG) $@ mips mips purple #======================================================================== # Nios
@@ -3283,33 +3265,32 @@ DK1S10_config: unconfig ######################################################################### EP1C20_config : unconfig - @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera + @$(MKCONFIG) $@ nios2 nios2 ep1c20 altera EP1S10_config : unconfig - @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera + @$(MKCONFIG) $@ nios2 nios2 ep1s10 altera EP1S40_config : unconfig - @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera + @$(MKCONFIG) $@ nios2 nios2 ep1s40 altera PK1C20_config : unconfig - @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent + @$(MKCONFIG) $@ nios2 nios2 pk1c20 psyent PCI5441_config : unconfig - @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent + @$(MKCONFIG) $@ nios2 nios2 pci5441 psyent # nios2 generic boards NIOS2_GENERIC = nios2-generic $(NIOS2_GENERIC:%=%_config) : unconfig - @$(MKCONFIG) $(@:_config=) nios2 nios2 nios2-generic altera + @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera #======================================================================== ## Microblaze #======================================================================== microblaze-generic_config: unconfig - @mkdir -p $(obj)include - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx + @$(MKCONFIG) $@ microblaze microblaze microblaze-generic xilinx #======================================================================== # Blackfin
@@ -3330,7 +3311,7 @@ BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04 BFIN_BOARDS += ibf-dsp561 $(BFIN_BOARDS:%=%_config) : unconfig - @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) + @$(MKCONFIG) $@ blackfin blackfin $(@:_config=) bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
@@ -3341,22 +3322,22 @@ bf527-ezkit-v2_config : unconfig #======================================================================== atngw100_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x + @$(MKCONFIG) $@ avr32 at32ap atngw100 atmel at32ap700x atstk1002_config \ atstk1003_config \ atstk1004_config \ atstk1006_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x + @$(MKCONFIG) $@ avr32 at32ap atstk1000 atmel at32ap700x favr-32-ezkit_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x + @$(MKCONFIG) $@ avr32 at32ap favr-32-ezkit earthlcd at32ap700x hammerhead_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x + @$(MKCONFIG) $@ avr32 at32ap hammerhead miromico at32ap700x mimc200_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x + @$(MKCONFIG) $@ avr32 at32ap mimc200 mimc at32ap700x #======================================================================== # SH3 (SuperH)
@@ -3368,7 +3349,7 @@ mimc200_config : unconfig rsk7203_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas + @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas ######################################################################### ## sh3 (Renesas SuperH)
@@ -3377,12 +3358,12 @@ rsk7203_config: unconfig mpr2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 + @$(MKCONFIG) -a $@ sh sh3 mpr2 ms7720se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se + @$(MKCONFIG) -a $@ sh sh3 ms7720se ######################################################################### ## sh4 (Renesas SuperH)
@@ -3391,34 +3372,33 @@ ms7720se_config: unconfig MigoR_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas + @$(MKCONFIG) -a $@ sh sh4 MigoR renesas ms7750se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se + @$(MKCONFIG) -a $@ sh sh4 ms7750se ms7722se_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se + @$(MKCONFIG) -a $@ sh sh4 ms7722se r2dplus_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas + @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas + @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas + @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas -xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) sh7785lcr_32bit_config \ sh7785lcr_config : unconfig @mkdir -p $(obj)include
@@ -3429,17 +3409,17 @@ sh7785lcr_config : unconfig echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ fi - @$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas + @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas + @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas espt_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 espt + @$(MKCONFIG) -a $@ sh sh4 espt #======================================================================== # SPARC
@@ -3451,20 +3431,20 @@ espt_config : unconfig # Gaisler GR-XC3S-1500 board gr_xc3s_1500_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_xc3s_1500 gaisler # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system gr_cpci_ax2000_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_cpci_ax2000 gaisler # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS # Development board Stratix II edition, FPGA Device EP2S60. gr_ep2s60_config: unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_ep2s60 gaisler # Gaisler LEON3 GRSIM simulator grsim_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler + @$(MKCONFIG) $@ sparc leon3 grsim gaisler ######################################################################### ## LEON2
@@ -3472,7 +3452,7 @@ grsim_config : unconfig # Gaisler LEON2 GRSIM simulator grsim_leon2_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler + @$(MKCONFIG) $@ sparc leon2 grsim_leon2 gaisler ######################################################################### #########################################################################
mkconfig +2 -2
@@ -22,7 +22,7 @@ while [ $# -gt 0 ] ; do esac done -[ "${BOARD_NAME}" ] || BOARD_NAME="$1" +[ "${BOARD_NAME}" ] || BOARD_NAME="${1%%_config}" [ $# -lt 4 ] && exit 1 [ $# -gt 6 ] && exit 1
@@ -102,7 +102,7 @@ done cat << EOF >> config.h #define CONFIG_BOARDDIR board/$BOARDDIR #include <config_defaults.h> -#include <configs/$1.h> +#include <configs/${1%%_config}.h> #include <asm/config.h> EOF
Signature · 1 line
1.6.6.1
PATCH 2/3 Makefile: simplify handling of build target names
Quoted 12 lines · On Saturday 15 May 2010 20:35:32 Wolfgang Denk wrote:
mkconfig +1
-1@@ -22,7 +22,7 @@ while [ $# -gt 0 ] ; do esac done -[ "${BOARD_NAME}" ] || BOARD_NAME="$1" +[ "${BOARD_NAME}" ] || BOARD_NAME="${1%%_config}" [ $# -lt 4 ] && exit 1 [ $# -gt 6 ] && exit 1
mkconfig done · line 107
Quoted 7 lines
mkconfig +1
-1@@ -102,7 +102,7 @@ done cat << EOF >> config.h #define CONFIG_BOARDDIR board/$BOARDDIR #include <config_defaults.h> -#include <configs/$1.h> +#include <configs/${1%%_config}.h> #include <asm/config.h> EOF
it isnt harmful, but using %% when there are no glob patterns doesnt make sense. so typically the code would be ${1%_config}. or even better, create a new variable up front set to ${1%_config} and use that later on instead of duplicating the same replacement construct multiple times.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100519/66cf19f3/attachment.pgp
PATCH 3/3 Makefile: simplify handling of common board configurations
In reply to Wolfgang DenkMany boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup.
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 1436 ++++++++++++++++++++++++++------------------------------------ 1 files changed, 607 insertions(+), 829 deletions(-)
Makefile +607 -829
@@ -478,6 +478,12 @@ unconfig: %: %_config $(MAKE) +# +# Functions to generate common board directory names +# +lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') +ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') + #======================================================================== # PowerPC #========================================================================
@@ -496,21 +502,37 @@ PATI_config: unconfig ## MPC5xxx Systems ######################################################################### -aev_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - -BC3450_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx bc3450 - -canmb_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx canmb - -cm5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx cm5200 +# generic boards +################ +BC3450_config \ +canmb_config \ +cm5200_config \ +hmi1001_config \ +jupiter_config \ +inka4x0_config \ +ipek01_config \ +motionpro_config\ +mucmc52_config \ +munices_config \ +o2dnt_config \ +uc101_config \ +v38b_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### +cpci5200_config \ +mecp5200_config \ +pf5200_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) esd -cpci5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx cpci5200 esd +aev_config \ +smmaco4_config \ +spieval_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc +# special boards +################ digsy_mtc_config \ digsy_mtc_LOWBOOT_config \ digsy_mtc_RAMBOOT_config: unconfig
@@ -529,9 +551,6 @@ galaxy5200_config: unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 -hmi1001_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx hmi1001 - Lite5200_config \ Lite5200_LOWBOOT_config \ Lite5200_LOWBOOT08_config \
@@ -554,15 +573,6 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube -jupiter_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx jupiter - -inka4x0_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx inka4x0 - -ipek01_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx ipek01 - lite5200b_config \ lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig
@@ -608,18 +618,6 @@ prs200_highboot_DDR_config: unconfig echo "#define CONFIG_PRS200" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 -mecp5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx mecp5200 esd - -motionpro_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx motionpro - -mucmc52_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx mucmc52 - -munices_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx munices - MVBC_P_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mvbc_p
@@ -633,9 +631,6 @@ MVSMR_config: unconfig @mkdir -p $(obj)board/matrix_vision/mvsmr @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision -o2dnt_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx o2dnt - pcm030_config \ pcm030_LOWBOOT_config: unconfig @mkdir -p $(obj)include $(obj)board/phytec/pcm030
@@ -644,9 +639,6 @@ pcm030_LOWBOOT_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec -pf5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx pf5200 esd - PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \
@@ -658,12 +650,6 @@ PM520_ROMBOOT_DDR_config: unconfig echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 -smmaco4_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - -spieval_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include
@@ -727,22 +713,25 @@ TQM5200_STK100_config: unconfig echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc -uc101_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx uc101 - -v38b_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx v38b - ######################################################################### ## MPC512x Systems ######################################################################### +# generic boards +################ +pdm360ng_config: unconfig + @$(MKCONFIG) $@ powerpc mpc512x $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### aria_config: unconfig @$(MKCONFIG) $@ powerpc mpc512x aria davedenx mecp5123_config: unconfig @$(MKCONFIG) $@ powerpc mpc512x mecp5123 esd +# special boards +################ mpc5121ads_config \ mpc5121ads_rev2_config \ : unconfig
@@ -752,13 +741,84 @@ mpc5121ads_rev2_config \ fi @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale -pdm360ng_config: unconfig - @$(MKCONFIG) $@ powerpc mpc512x pdm360ng - ######################################################################### ## MPC8xx Systems ######################################################################### +# generic boards +################ + +c2mon_config \ +EP88x_config \ +ESTEEM192E_config \ +ETX094_config \ +FLAGADM_config \ +GENIETV_config \ +GTH_config \ +hermes_config \ +IP860_config \ +LANTEC_config \ +lwmon_config \ +NX823_config \ +quantum_config \ +R360MPI_config \ +RBC823_config \ +rmu_config \ +spc1920_config \ +svm_sc8xx_config \ +uc100_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) + +RPXClassic_config \ +RPXlite_config \ +RRvision_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) + +# vendor specific boards (sorted by vendor) +########################################### + +MHPC_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec + +TOP860_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx top860 emk + +kmsupx4_config \ +mgsuvd_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile + +KUP4K_config \ +KUP4X_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) kup + +ELPT860_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX + +stxxtc_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx + +HMI10_config \ +SM850_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc + +CCM_config \ +IAD210_config \ +pcu_e_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) siemens + +QS823_config \ +QS850_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc + +QS860T_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc + +AMX860_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel + +# special boards +################ + Adder87x_config \ AdderII_config \ AdderUSB_config \
@@ -769,6 +829,9 @@ Adder_config \ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder +cogent_mpc8xx_config: unconfig + @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent + ADS860_config \ FADS823_config \ FADS850SAR_config \
@@ -777,33 +840,6 @@ MPC885ADS_config \ FADS860T_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads -AMX860_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel - -c2mon_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx c2mon - -CCM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx CCM siemens - -cogent_mpc8xx_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx cogent - -ELPT860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX - -EP88x_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx ep88x - -ESTEEM192E_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx esteem192e - -ETX094_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx etx094 - -FLAGADM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx flagadm - GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include
@@ -811,21 +847,6 @@ GEN860T_config: unconfig echo "#define CONFIG_SC" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t -GENIETV_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx genietv - -GTH_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx gth - -hermes_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx hermes - -HMI10_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc - -IAD210_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx IAD210 siemens - ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include
@@ -833,9 +854,6 @@ ICU862_config: unconfig echo "#define CONFIG_100MHz" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862 -IP860_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx ip860 - IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig
@@ -860,31 +878,10 @@ IVMS8_config: unconfig echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm -kmsupx4_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile - -KUP4K_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx kup4k kup - -KUP4X_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx kup4x kup - -LANTEC_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx lantec - -lwmon_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx lwmon - MBX_config \ MBX860T_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx -mgsuvd_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile - -MHPC_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec - NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include
@@ -951,36 +948,6 @@ CP850_config: unconfig } @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 -NX823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx nx823 - -pcu_e_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx pcu_e siemens - -QS850_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc - -QS823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc - -QS860T_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc - -quantum_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx quantum - -R360MPI_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx r360mpi - -RBC823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx rbc823 - -RPXClassic_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RPXClassic - -RPXlite_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RPXlite - RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ RPXlite_DW_64_LCD_config \
@@ -1000,40 +967,18 @@ RPXlite_DW_config: unconfig echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw -rmu_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx rmu - -RRvision_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RRvision - RRvision_LCD_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision -SM850_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc - -spc1920_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx spc1920 - SPD823TS_config: unconfig @$(MKCONFIG) $@ powerpc mpc8xx spd8xx -stxxtc_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx - -svm_sc8xx_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx svm_sc8xx - SXNI855T_config: unconfig @$(MKCONFIG) $@ powerpc mpc8xx sixnet -# EMK MPC8xx based modules -TOP860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx top860 emk - # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support
@@ -1070,9 +1015,6 @@ TTTech_config: unconfig @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc -uc100_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx uc100 - v37_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h
@@ -1089,37 +1031,110 @@ wtk_config: unconfig ## PPC4xx Systems ######################################################################### -acadia_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx acadia amcc +# generic boards +################ + +csb272_config \ +csb472_config \ +ERIC_config \ +G2000_config \ +JSE_config \ +korat_config \ +lwmon5_config \ +ML2_config \ +pcs440ep_config \ +quad100hd_config\ +sbc405_config \ +sc3_config \ +zeus_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +acadia_config \ +bamboo_config \ +bubinga_config \ +ebony_config \ +katmai_config \ +luan_config \ +makalu_config \ +ocotea_config \ +redwood_config \ +taihu_config \ +taishan_config \ +yucca_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amcc -acadia_nand_config: unconfig - @mkdir -p $(obj)include $(obj)board/amcc/acadia - @mkdir -p $(obj)nand_spl/board/amcc/acadia - @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc +AP1000_config:unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amirix + +ADCIOP_config \ +APC405_config \ +AR405_config \ +ASH405_config \ +CANBT_config \ +CMS700_config \ +CPCI2DP_config \ +CPCIISER4_config\ +DASA_SIM_config \ +DP405_config \ +DU405_config \ +DU440_config \ +HH405_config \ +HUB405_config \ +PCI405_config \ +PLU405_config \ +PMC405_config \ +PMC405DE_config \ +PMC440_config \ +VOH405_config \ +VOM405_config \ +WUH405_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) esd -ADCIOP_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx adciop esd +CRAYL1_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx L1 cray -alpr_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx alpr prodrive +dlvision_config \ +gdppc440etx_config \ +neo_config : unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) gdsys -AP1000_config:unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ap1000 amirix +icon_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mosaixtech -APC405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx apc405 esd +MIP405_config \ +PIP405_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mpl -AR405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ar405 esd +hcu4_config \ +hcu5_config \ +mcu25_config: unconfig + @mkdir -p $(obj)board/netstal/common + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal -ASH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ash405 esd +alpr_config \ +p3p440_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) prodrive -bamboo_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx bamboo amcc +KAREF_config \ +METROBOX_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) sandburst + +XPEDITE1000_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) xes + +# special boards +################ + +acadia_nand_config: unconfig + @mkdir -p $(obj)include $(obj)board/amcc/acadia + @mkdir -p $(obj)nand_spl/board/amcc/acadia + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc bamboo_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/bamboo
@@ -1129,12 +1144,6 @@ bamboo_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc -bubinga_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx bubinga amcc - -CANBT_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx canbt esd - # Arches, Canyonlands & Glacier use different U-Boot images arches_config \ canyonlands_config \
@@ -1167,12 +1176,6 @@ CATcenter_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave -CMS700_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cms700 esd - -CPCI2DP_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cpci2dp esd - CPCI405_config \ CPCI4052_config \ CPCI405DT_config \
@@ -1180,39 +1183,6 @@ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd -CPCIISER4_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cpciiser4 esd - -CRAYL1_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx L1 cray - -csb272_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx csb272 - -csb472_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx csb472 - -DASA_SIM_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dasa_sim esd - -dlvision_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dlvision gdsys - -DP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dp405 esd - -DU405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx du405 esd - -DU440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx du440 esd - -ebony_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ebony amcc - -ERIC_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx eric - fx12mm_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@@ -1231,29 +1201,6 @@ fx12mm_config: unconfig >> $(obj)board/avnet/fx12mm/config.tmp @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet -G2000_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx g2000 - -gdppc440etx_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx gdppc440etx gdsys - -hcu4_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx hcu4 netstal - -hcu5_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx hcu5 netstal - -HH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx hh405 esd - -HUB405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx hub405 esd - -icon_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx icon mosaixtech - # Compact-Center(codename intip) & DevCon-Center use different U-Boot images intip_config \ devconcenter_config: unconfig
@@ -1262,15 +1209,6 @@ devconcenter_config: unconfig tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys -JSE_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx jse - -KAREF_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx karef sandburst - -katmai_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx katmai amcc - # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig
@@ -1285,37 +1223,12 @@ haleakala_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc -korat_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx korat - -luan_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx luan amcc - -lwmon5_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx lwmon5 - -makalu_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx makalu amcc - -mcu25_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx mcu25 netstal - -METROBOX_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx metrobox sandburst - -MIP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx mip405 mpl - MIP405T_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIP405T" >$(obj)include/config.h @$(XECHO) "Enable subset config for MIP405T" @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl -ML2_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ml2 - ml507_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/xilinx/ml507
@@ -1334,40 +1247,10 @@ ml507_config: unconfig >> $(obj)board/xilinx/ml507/config.tmp @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx -neo_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx neo gdsys - -ocotea_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ocotea amcc - OCRTC_config \ ORSG_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd -p3p440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx p3p440 prodrive - -PCI405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pci405 esd - -pcs440ep_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pcs440ep - -PIP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pip405 mpl - -PLU405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx plu405 esd - -PMC405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc405 esd - -PMC405DE_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc405de esd - -PMC440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc440 esd - PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ PPChameleonEVB_ME_25_config \
@@ -1388,18 +1271,6 @@ PPChameleonEVB_HI_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave -quad100hd_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx quad100hd - -redwood_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx redwood amcc - -sbc405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx sbc405 - -sc3_config:unconfig - @$(MKCONFIG) $@ powerpc ppc4xx sc3 - sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include
@@ -1429,12 +1300,6 @@ rainier_ramboot_config: unconfig $(obj)board/amcc/sequoia/config.tmp @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc -taihu_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx taihu amcc - -taishan_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx taishan amcc - v5fx30teval_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@@ -1453,12 +1318,6 @@ v5fx30teval_flash_config: unconfig >> $(obj)board/avnet/v5fx30teval/config.tmp @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet -VOH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx voh405 esd - -VOM405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx vom405 esd - W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $@ powerpc ppc4xx w7o
@@ -1468,9 +1327,6 @@ walnut_config \ sycamore_config: unconfig @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc -WUH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx wuh405 esd - xilinx-ppc405-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
@@ -1503,9 +1359,6 @@ xilinx-ppc440-generic_config: unconfig >> $(obj)board/xilinx/ppc440-generic/config.tmp @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx -XPEDITE1000_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx xpedite1000 xes - yosemite_config \ yellowstone_config: unconfig @mkdir -p $(obj)include
@@ -1513,35 +1366,50 @@ yellowstone_config: unconfig tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc -yucca_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx yucca amcc - -zeus_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx zeus - ######################################################################### ## MPC8220 Systems ######################################################################### +# generic boards +################ +sorcery_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8220 $(call lcname,$@) + Alaska8220_config \ Yukon8220_config: unconfig @$(MKCONFIG) $@ powerpc mpc8220 alaska -sorcery_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8220 sorcery - ######################################################################### ## MPC824x Systems ######################################################################### -A3000_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x a3000 - -barco_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x barco - -BMW_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x bmw +# generic boards +################ +A3000_config \ +barco_config \ +BMW_config \ +CU824_config \ +HIDDEN_DRAGON_config \ +MOUSSE_config \ +MUSENKI_config \ +MVBLUE_config \ +OXC_config \ +PN62_config \ +sbc8240_config \ +utx8245_config: unconfig + @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +debris_config \ +kvme080_config: unconfig + @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) etin + +# special boards +################ +eXalion_config: unconfig + @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion CPC45_config \ CPC45_ROMBOOT_config: unconfig
@@ -1554,21 +1422,6 @@ CPC45_ROMBOOT_config: unconfig echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45 -CU824_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x cu824 - -debris_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x debris etin - -eXalion_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x eXalion - -HIDDEN_DRAGON_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x hidden_dragon - -kvme080_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x kvme080 etin - # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as # time permits. #linkstation_HDLAN_config \
@@ -1581,42 +1434,53 @@ linkstation_HGLAN_config: unconfig esac @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation -MOUSSE_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x mousse - -MUSENKI_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x musenki - -MVBLUE_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x mvblue - -OXC_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x oxc - -PN62_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x pn62 - Sandpoint8240_config: unconfig @$(MKCONFIG) $@ powerpc mpc824x sandpoint Sandpoint8245_config: unconfig @$(MKCONFIG) $@ powerpc mpc824x sandpoint -sbc8240_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x sbc8240 - -utx8245_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x utx8245 - ######################################################################### ## MPC8260 Systems ######################################################################### -atc_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 atc +# generic boards +################ +atc_config \ +ep8260_config \ +ep82xxm_config \ +gw8260_config \ +hymod_config \ +IDS8247_config \ +IPHASE4539_config \ +ppmc8260_config \ +RPXsuper_config \ +rsdproto_config \ +sacsng_config \ +sbc8260_config \ +ZPC1900_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8266ADS_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) freescale + +mgcoge_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) keymile + +SCM_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call ucname,$@) siemens + +TQM8272_config: unconfig + @$(MKCONFIG) TQM8272 powerpc mpc8260 $(call lcname,$@) tqc + +# special boards +################ cogent_mpc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 cogent + @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig
@@ -1644,24 +1508,6 @@ ep8248_config \ ep8248E_config : unconfig @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 -ep8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ep8260 - -ep82xxm_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ep82xxm - -gw8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 gw8260 - -hymod_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 hymod - -IDS8247_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ids8247 - -IPHASE4539_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 iphase4539 - ISPAN_config \ ISPAN_REVB_config: unconfig @mkdir -p $(obj)include
@@ -1670,9 +1516,6 @@ ISPAN_REVB_config: unconfig fi @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan -mgcoge_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8260 mgcoge keymile - MPC8260ADS_config \ MPC8260ADS_lowboot_config \ MPC8260ADS_33MHz_config \
@@ -1703,9 +1546,6 @@ PQ2FADS-ZU_66MHz_lowboot_config \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale -MPC8266ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 mpc8266ads freescale - muas3001_dev_config \ muas3001_config : unconfig @mkdir -p $(obj)include
@@ -1763,9 +1603,6 @@ PM828_ROMBOOT_PCI_config: unconfig fi @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 -ppmc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ppmc8260 - Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include
@@ -1773,21 +1610,6 @@ Rattler_config: unconfig @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler -RPXsuper_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 rpxsuper - -rsdproto_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 rsdproto - -sacsng_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 sacsng - -sbc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 sbc8260 - -SCM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 SCM siemens - TQM8255_AA_config \ TQM8260_AA_config \ TQM8260_AB_config \
@@ -1829,29 +1651,49 @@ TQM8265_AA_config: unconfig fi @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc -TQM8272_config: unconfig - @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc - VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk -ZPC1900_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 zpc1900 - ######################################################################### ## Coldfire ######################################################################### +# generic boards +################ + +idmr_config: unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +TASREG_config : unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) esd + +M5208EVBE_config \ +M5249EVB_config \ +M5253DEMO_config \ +M5253EVBE_config \ +M5271EVB_config \ +M5272C3_config \ +M5275EVB_config \ +M5282EVB_config \ +M53017EVB_config: unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) freescale + +EP2500_config : unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) Mercury + +# special boards +################ + astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro -M5208EVBE_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5208evbe freescale - M52277EVB_config \ M52277EVB_spansion_config \ M52277EVB_stmicro_config : unconfig
@@ -1891,15 +1733,6 @@ M5235EVB_Flash32_config: unconfig fi @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale -M5249EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5249evb freescale - -M5253DEMO_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5253demo freescale - -M5253EVBE_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5253evbe freescale - cobra5272_config : unconfig @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
@@ -1915,27 +1748,6 @@ EB+MCF-EV123_internal_config : unconfig @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS -EP2500_config: unconfig - @$(MKCONFIG) $@ m68k mcf52x2 ep2500 Mercury - -idmr_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 idmr - -M5271EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5271evb freescale - -M5272C3_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5272c3 freescale - -M5275EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5275evb freescale - -M5282EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5282evb freescale - -M53017EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf532x m53017evb freescale - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \
@@ -2080,15 +1892,32 @@ M5485HFE_config : unconfig fi @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale -TASREG_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 tasreg esd - ######################################################################### ## MPC83xx Systems ######################################################################### +# generic boards +################ + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8323ERDB_config \ +MPC8349EMDS_config \ +MPC837XERDB_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) freescale + kmeter1_config: unconfig - @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) keymile + +MVBLM7_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) matrix_vision + +TQM834x_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) tqc + +# special boards +################ MPC8313ERDB_33_config \ MPC8313ERDB_66_config \
@@ -2115,9 +1944,6 @@ MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale -MPC8323ERDB_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc8323erdb freescale - MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \
@@ -2145,9 +1971,6 @@ MPC832XEMDS_ATM_config: unconfig fi ; @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale -MPC8349EMDS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc8349emds freescale - MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ MPC8349ITXGP_config: unconfig
@@ -2206,12 +2029,6 @@ MPC837XEMDS_HOST_config: unconfig fi ; @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale -MPC837XERDB_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc837xerdb freescale - -MVBLM7_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mvblm7 matrix_vision - sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig
@@ -2230,30 +2047,41 @@ SIMPC8313_SP_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon -TQM834x_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx tqm834x tqc - caddy2_config \ vme8349_config: unconfig @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd -edb9301_config \ -edb9302_config \ -edb9302a_config \ -edb9307_config \ -edb9307a_config \ -edb9312_config \ -edb9315_config \ -edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx - ######################################################################### ## MPC85xx Systems ######################################################################### -ATUM8548_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx atum8548 +# generic boards +################ +ATUM8548_config \ +PM854_config \ +PM856_config \ +socrates_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8540ADS_config \ +MPC8560ADS_config \ +MPC8544DS_config \ +MPC8568MDS_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) freescale + +stxgp3_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) stx + +XPEDITE5200_config \ +XPEDITE5370_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) xes + +# special boards +################ MPC8536DS_NAND_config \ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \
@@ -2261,9 +2089,6 @@ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale -MPC8540ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8540ads freescale - MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \
@@ -2278,9 +2103,6 @@ MPC8540EVAL_66_slave_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval -MPC8560ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8560ads freescale - MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig @mkdir -p $(obj)include
@@ -2289,9 +2111,6 @@ MPC8541CDS_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale -MPC8544DS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8544ds freescale - MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig @mkdir -p $(obj)include
@@ -2308,9 +2127,6 @@ MPC8555CDS_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale -MPC8568MDS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8568mds freescale - MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig
@@ -2342,12 +2158,6 @@ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale -PM854_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx pm854 - -PM856_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx pm856 - sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig
@@ -2365,12 +2175,6 @@ sbc8560_33_config \ sbc8560_66_config: unconfig @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560 -socrates_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx socrates - -stxgp3_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx stxgp3 stx - stxssa_config \ stxssa_4M_config: unconfig @mkdir -p $(obj)include
@@ -2396,18 +2200,27 @@ TQM8560_config: unconfig @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc -XPEDITE5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx xpedite5200 xes - -XPEDITE5370_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx xpedite5370 xes - ######################################################################### ## MPC86xx Systems ######################################################################### +# generic boards +################ + +sbc8641d_config: unconfig + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + MPC8610HPCD_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx mpc8610hpcd freescale + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) freescale + +XPEDITE5170_config: unconfig + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) xes + +# special boards +################ MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig
@@ -2417,41 +2230,43 @@ MPC8641HPCN_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale -sbc8641d_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx sbc8641d - -XPEDITE5170_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx xpedite5170 xes - ######################################################################### ## 74xx/7xx Systems ######################################################################### -AmigaOneG3SE_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx AmigaOneG3SE MAI +# generic boards +################ + +ppmc7xx_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) -BAB7xx_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx bab7xx eltec +# vendor specific boards (sorted by vendor) +########################################### + +BAB7xx_config \ +ELPPC_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) eltec CPCI750_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx cpci750 esd + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) esd + +mpc7448hpc2_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) freescale -DB64360_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx db64360 Marvell +AmigaOneG3SE_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(@:_config=) MAI +DB64360_config \ DB64460_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx db64460 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) Marvell -ELPPC_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx elppc eltec +# special boards +################ EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 -mpc7448hpc2_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx mpc7448hpc2 freescale - P3G4_config: unconfig @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260
@@ -2469,9 +2284,6 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 -ppmc7xx_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx ppmc7xx - ZUMA_config: unconfig @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260
@@ -2482,40 +2294,89 @@ ZUMA_config: unconfig ## StrongARM Systems ######################################################################### -assabet_config : unconfig - @$(MKCONFIG) $@ arm sa1100 assabet - -dnp1110_config : unconfig - @$(MKCONFIG) $@ arm sa1100 dnp1110 - -gcplus_config : unconfig - @$(MKCONFIG) $@ arm sa1100 gcplus - -lart_config : unconfig - @$(MKCONFIG) $@ arm sa1100 lart - +# generic boards +################ +assabet_config \ +dnp1110_config \ +gcplus_config \ +lart_config \ shannon_config : unconfig - @$(MKCONFIG) $@ arm sa1100 shannon + @$(MKCONFIG) $@ arm sa1100 $(call lcname,$@) ######################################################################### ## ARM92xT Systems ######################################################################### +# generic boards +################ + +edb9301_config \ +edb9302_config \ +edb9302a_config \ +edb9307_config \ +edb9307a_config \ +edb9312_config \ +edb9315_config \ +edb9315a_config: unconfig + @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx + +mx1ads_config \ +mx1fs2_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx + +sbc2410x_config: unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL s3c24x0 + +scb9328_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx + +cm4008_config \ +cm41xx_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL ks8695 + +netstar_config \ +voiceblue_config: unconfig + @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + a320evb_config : unconfig - @$(MKCONFIG) $@ arm arm920t a320evb faraday a320 + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) faraday a320 + +smdk2400_config \ +smdk2410_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) samsung s3c24x0 ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### -at91rm9200dk_config : unconfig - @$(MKCONFIG) $@ arm arm920t at91rm9200dk atmel at91rm9200 +# generic boards +################ +cmc_pu2_config \ +csb637_config \ +kb9202_config \ +m501sk_config \ +mp2usb_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL at91rm9200 + +# vendor specific boards (sorted by vendor) +########################################### + +at91rm9200dk_config \ at91rm9200ek_config : unconfig - @$(MKCONFIG) $@ arm arm920t at91rm9200ek atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) atmel at91rm9200 -cmc_pu2_config : unconfig - @$(MKCONFIG) $@ arm arm920t cmc_pu2 NULL at91rm9200 +eb_cpux9k2_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) BuS at91 + +omap1510inn_config : unconfig + @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) ti + +# special boards +################ CPUAT91_RAM_config \ CPUAT91_config : unconfig
@@ -2523,30 +2384,45 @@ CPUAT91_config : unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 -csb637_config : unconfig - @$(MKCONFIG) $@ arm arm920t csb637 NULL at91rm9200 - -eb_cpux9k2_config : unconfig - @$(MKCONFIG) $@ arm arm920t eb_cpux9k2 BuS at91 - -kb9202_config : unconfig - @$(MKCONFIG) $@ arm arm920t kb9202 NULL at91rm9200 - -m501sk_config : unconfig - @$(MKCONFIG) $@ arm arm920t m501sk NULL at91rm9200 - -mp2usb_config : unconfig - @$(MKCONFIG) $@ arm arm920t mp2usb NULL at91rm9200 - ######################################################################### ## ARM926EJ-S Systems ######################################################################### +# generic boards +################ + afeb9260_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs afeb9260 NULL at91 + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) NULL at91 + +# vendor specific boards (sorted by vendor) +########################################### at91cap9adk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs at91cap9adk atmel at91 + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) atmel at91 + +meesc_config \ +otc570_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) esd at91 + +guruplug_config \ +mv88f6281gtw_ge_config \ +openrd_base_config \ +rd6281a_config \ +sheevaplug_config: unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) Marvell kirkwood + +VCMA9_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) mpl s3c24x0 + +pm9261_config \ +pm9263_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ronetix at91 + +omap5912osk_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ti omap + +# special boards +################ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \
@@ -2647,12 +2523,6 @@ CPU9260_config : unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 -meesc_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs meesc esd at91 - -pm9261_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs pm9261 ronetix at91 - at91sam9m10g45ek_nandflash_config \ at91sam9m10g45ek_dataflash_config \ at91sam9m10g45ek_dataflash_cs0_config \
@@ -2674,12 +2544,6 @@ at91sam9g45ekes_config : unconfig fi; @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 -otc570_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs otc570 esd at91 - -pm9263_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs pm9263 ronetix at91 - SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig
@@ -2735,9 +2599,6 @@ davinci_dm6467evm_config : unconfig @$(MKCONFIG) -n $@ $@ arm arm926ejs \ $(subst davinci_,,$(@:_config=)) davinci davinci -guruplug_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - magnesium_config \ imx27lite_config: unconfig @$(MKCONFIG) $@ arm arm926ejs imx27lite logicpd mx27
@@ -2746,18 +2607,6 @@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $@ arm lh7a40x lpd7a40x -mv88f6281gtw_ge_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -mx1ads_config : unconfig - @$(MKCONFIG) $@ arm arm920t mx1ads NULL imx - -mx1fs2_config : unconfig - @$(MKCONFIG) $@ arm arm920t mx1fs2 NULL imx - -netstar_config: unconfig - @$(MKCONFIG) $@ arm arm925t netstar - nhk8815_config \ nhk8815_onenand_config: unconfig @mkdir -p $(obj)include
@@ -2767,9 +2616,6 @@ nhk8815_onenand_config: unconfig fi @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik -omap1510inn_config : unconfig - @$(MKCONFIG) $@ arm arm925t omap1510inn ti - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \
@@ -2790,12 +2636,6 @@ omap1610h2_cs_autoboot_config: unconfig fi; @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap -omap5912osk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs omap5912osk ti omap - -openrd_base_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig
@@ -2807,24 +2647,6 @@ omap730p2_cs3boot_config : unconfig fi; @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap -rd6281a_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -sbc2410x_config: unconfig - @$(MKCONFIG) $@ arm arm920t sbc2410x NULL s3c24x0 - -scb9328_config : unconfig - @$(MKCONFIG) $@ arm arm920t scb9328 NULL imx - -sheevaplug_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -smdk2400_config : unconfig - @$(MKCONFIG) $@ arm arm920t smdk2400 samsung s3c24x0 - -smdk2410_config : unconfig - @$(MKCONFIG) $@ arm arm920t smdk2410 samsung s3c24x0 - spear300_config \ spear310_config \ spear320_config : unconfig
@@ -2873,135 +2695,113 @@ tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 -VCMA9_config : unconfig - @$(MKCONFIG) $@ arm arm920t vcma9 mpl s3c24x0 - ######################################################################### # ARM supplied Versatile development boards ######################################################################### -cm4008_config : unconfig - @$(MKCONFIG) $@ arm arm920t cm4008 NULL ks8695 - -cm41xx_config : unconfig - @$(MKCONFIG) $@ arm arm920t cm41xx NULL ks8695 - versatile_config \ versatileab_config \ versatilepb_config : unconfig @board/armltd/versatile/split_by_variant.sh $@ -voiceblue_config: unconfig - @$(MKCONFIG) $@ arm arm925t voiceblue - ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @$(MKCONFIG) $@ arm s3c44b0 B2 dave + @$(MKCONFIG) $@ arm s3c44b0 $(call ucname,$@) dave ######################################################################### ## ARM720T Systems ######################################################################### -armadillo_config: unconfig - @$(MKCONFIG) $@ arm arm720t armadillo - -ep7312_config : unconfig - @$(MKCONFIG) $@ arm arm720t ep7312 - -impa7_config : unconfig - @$(MKCONFIG) $@ arm arm720t impa7 +# generic boards +################ +armadillo_config \ +ep7312_config \ +impa7_config \ modnet50_config : unconfig - @$(MKCONFIG) $@ arm arm720t modnet50 + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) evb4510_config : unconfig - @$(MKCONFIG) $@ arm arm720t evb4510 NULL s3c4510b + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL s3c4510b lpc2292sodimm_config: unconfig - @$(MKCONFIG) $@ arm arm720t lpc2292sodimm NULL lpc2292 + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL lpc2292 + +# vendor specific boards (sorted by vendor) +########################################### SMN42_config : unconfig - @$(MKCONFIG) $@ arm arm720t SMN42 siemens lpc2292 + @$(MKCONFIG) $@ arm arm720t $(call ucname,$@) siemens lpc2292 ######################################################################### ## ARM CORTEX Systems ######################################################################### +omapname = $(shell echo $(1) | sed -e 's/omap[0-9]_//' -e 's/\(.*\)_config/\L\1/') -devkit8000_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 devkit8000 timll omap3 - -omap3_beagle_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 beagle ti omap3 - -omap3_overo_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 overo NULL omap3 - -omap3_evm_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 evm ti omap3 +# generic boards +################ +omap3_overo_config \ omap3_pandora_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 pandora NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) NULL omap3 -omap3_sdp3430_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 sdp3430 ti omap3 +# vendor specific boards (sorted by vendor) +########################################### -omap3_zoom1_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 zoom1 logicpd omap3 +mx51evk_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) freescale mx51 +omap3_zoom1_config \ omap3_zoom2_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 zoom2 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) logicpd omap3 smdkc100_config: unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 smdkc100 samsung s5pc1xx + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) samsung s5pc1xx + +omap3_beagle_config \ +omap3_evm_config \ +omap3_sdp3430_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) ti omap3 + +devkit8000_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) timll omap3 ######################################################################### ## XScale Systems ######################################################################### -actux1_config : unconfig - @$(MKCONFIG) $@ arm ixp actux1 - -actux2_config : unconfig - @$(MKCONFIG) $@ arm ixp actux2 - -actux3_config : unconfig - @$(MKCONFIG) $@ arm ixp actux3 - -actux4_config : unconfig - @$(MKCONFIG) $@ arm ixp actux4 - -cerf250_config : unconfig - @$(MKCONFIG) $@ arm pxa cerf250 - -cradle_config : unconfig - @$(MKCONFIG) $@ arm pxa cradle - -csb226_config : unconfig - @$(MKCONFIG) $@ arm pxa csb226 - -delta_config : unconfig - @$(MKCONFIG) $@ arm pxa delta - -innokom_config : unconfig - @$(MKCONFIG) $@ arm pxa innokom - -ixdp425_config : unconfig - @$(MKCONFIG) $@ arm ixp ixdp425 +# generic boards +################ +actux1_config \ +actux2_config \ +actux3_config \ +actux4_config \ +ixdp425_config \ ixdpg425_config : unconfig - @$(MKCONFIG) $@ arm ixp ixdp425 - -lubbock_config : unconfig - @$(MKCONFIG) $@ arm pxa lubbock - -pleb2_config : unconfig - @$(MKCONFIG) $@ arm pxa pleb2 + @$(MKCONFIG) $@ arm ixp $(call lcname,$@) + +cerf250_config \ +cradle_config \ +csb226_config \ +delta_config \ +innokom_config \ +lubbock_config \ +pleb2_config \ +logodl_config \ +pxa255_idp_config \ +wepep250_config \ +xaeniax_config \ +xm250_config \ +xsengine_config \ +zylonite_config : + @$(MKCONFIG) $@ arm pxa $(call lcname,$@) -logodl_config : unconfig - @$(MKCONFIG) $@ arm pxa logodl +# special boards +################ pdnb3_config \ scpu_config: unconfig
@@ -3011,9 +2811,6 @@ scpu_config: unconfig fi @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive -pxa255_idp_config: unconfig - @$(MKCONFIG) $@ arm pxa pxa255_idp - polaris_config \ trizepsiv_config : unconfig @mkdir -p $(obj)include
@@ -3022,24 +2819,30 @@ trizepsiv_config : unconfig fi; @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv -wepep250_config : unconfig - @$(MKCONFIG) $@ arm pxa wepep250 +######################################################################### +## ARM1136 Systems +######################################################################### -xaeniax_config : unconfig - @$(MKCONFIG) $@ arm pxa xaeniax +# generic boards +################ -xm250_config : unconfig - @$(MKCONFIG) $@ arm pxa xm250 +# vendor specific boards (sorted by vendor) +########################################### -xsengine_config : unconfig - @$(MKCONFIG) $@ arm pxa xsengine +qong_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) davedenx mx31 -zylonite_config : - @$(MKCONFIG) $@ arm pxa zylonite +mx31ads_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) freescale mx31 -######################################################################### -## ARM1136 Systems -######################################################################### +imx31_litekit_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) logicpd mx31 + +omap2420h4_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) ti omap24xx + +# special boards +################ apollon_config : unconfig @mkdir -p $(obj)include
@@ -3047,9 +2850,6 @@ apollon_config : unconfig @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm1136 apollon NULL omap24xx -imx31_litekit_config : unconfig - @$(MKCONFIG) $@ arm arm1136 imx31_litekit logicpd mx31 - imx31_phycore_eet_config \ imx31_phycore_config : unconfig @mkdir -p $(obj)include
@@ -3058,9 +2858,6 @@ imx31_phycore_config : unconfig fi @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 -mx31ads_config : unconfig - @$(MKCONFIG) $@ arm arm1136 mx31ads freescale mx31 - mx31pdk_config \ mx31pdk_nand_config : unconfig @mkdir -p $(obj)include
@@ -3072,15 +2869,6 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 -mx51evk_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 mx51evk freescale mx51 - -omap2420h4_config : unconfig - @$(MKCONFIG) $@ arm arm1136 omap2420h4 ti omap24xx - -qong_config : unconfig - @$(MKCONFIG) $@ arm arm1136 qong davedenx mx31 - ######################################################################### ## ARM1176 Systems #########################################################################
@@ -3103,14 +2891,13 @@ smdk6400_config : unconfig ######################################################################### ## AMD SC520 CDP ######################################################################### -eNET_config : unconfig - @$(MKCONFIG) $@ i386 i386 eNET NULL sc520 - -sc520_cdp_config : unconfig - @$(MKCONFIG) $@ i386 i386 sc520_cdp NULL sc520 +# generic boards +################ +eNET_config \ +sc520_cdp_config \ sc520_spunk_config : unconfig - @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 $(call lcname,$@) NULL sc520 sc520_spunk_rel_config : unconfig @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520
@@ -3122,6 +2909,15 @@ sc520_spunk_rel_config : unconfig ## MIPS32 4Kc ######################################################################### +# generic boards +################ + +tb0229_config: unconfig + @$(MKCONFIG) $@ mips mips $(call lcname,$@) + +# special boards +################ + incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \
@@ -3135,9 +2931,6 @@ incaip_config: unconfig echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a incaip mips mips incaip -tb0229_config: unconfig - @$(MKCONFIG) $@ mips mips tb0229 - vct_premium_config \ vct_premium_small_config \ vct_premium_onenand_config \
@@ -3264,20 +3057,17 @@ DK1S10_config: unconfig ## Nios-II ######################################################################### -EP1C20_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1c20 altera - -EP1S10_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1s10 altera +# vendor specific boards (sorted by vendor) +########################################### -EP1S40_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1s40 altera +EP1C20_config \ +EP1S10_config \ +EP1S40_config : unconfig + @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) altera -PK1C20_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 pk1c20 psyent - -PCI5441_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 pci5441 psyent +PK1C20_config \ +PCI5441_config : unconfig + @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) psyent # nios2 generic boards NIOS2_GENERIC = nios2-generic
@@ -3426,33 +3216,21 @@ espt_config : unconfig #======================================================================== ######################################################################### -## LEON3 +## LEON2 ######################################################################### -# Gaisler GR-XC3S-1500 board -gr_xc3s_1500_config : unconfig - @$(MKCONFIG) $@ sparc leon3 gr_xc3s_1500 gaisler - -# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system -gr_cpci_ax2000_config : unconfig - @$(MKCONFIG) $@ sparc leon3 gr_cpci_ax2000 gaisler - -# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS -# Development board Stratix II edition, FPGA Device EP2S60. -gr_ep2s60_config: unconfig - @$(MKCONFIG) $@ sparc leon3 gr_ep2s60 gaisler - -# Gaisler LEON3 GRSIM simulator -grsim_config : unconfig - @$(MKCONFIG) $@ sparc leon3 grsim gaisler +grsim_leon2_config : unconfig + @$(MKCONFIG) $@ sparc leon2 $(call lcname,$@) gaisler ######################################################################### -## LEON2 +## LEON3 ######################################################################### -# Gaisler LEON2 GRSIM simulator -grsim_leon2_config : unconfig - @$(MKCONFIG) $@ sparc leon2 grsim_leon2 gaisler +gr_xc3s_1500_config \ +gr_cpci_ax2000_config \ +gr_ep2s60_config \ +grsim_config : unconfig + @$(MKCONFIG) $@ sparc leon3 $(call lcname,$@) gaisler ######################################################################### #########################################################################
Signature · 1 line
1.6.6.1
cover Makefile: rework / cleanup
In reply to Wolfgang DenkHi Wolfgang,
Quoted 7 lines
The top level
Makefileis growing and growing. Once, wehn we suppoted only a few tens of boards, it was possible to implement board configuration logic in theMakefile, but it quickly turned out that this doesn't scale. Also, it is not really needed (at least not any more) - we noch have mechanisnms in place, that allow for more efficient code.
Quoted 7 lines
The following patch series is an attempt to start some cleanup and reduce the size of the top level
Makefile. The solution is neither perfect nor complete - there are quite a lot of boards that resist such a cleanup and need more thorough cleanup. But it's an initial step, showing what could and should be done, which boards have problems, and why this is the case. Eentually this paves the ground for a more friendly way to add new board configurations.
Wow, thanks for these cleanups. This is absolutely a good direction to simplify the makefile. For all three parts you have my
Acked-by Detlev Zundel <[email protected]>
Cheers
Detlev
Signature · 8 lines
As a general remark, you're more likely to get meaningful feedback if you just submit what you think is best. You'll get more feedback when people don't like what you did, but any EE will tell you that negative feedback is the path to stability. -- Ben Warren <[email protected]> -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
v2 cover Makefile: rework / cleanup
In reply to Wolfgang DenkThe top level Makefile is growing and growing. Once, when we supported only a few tens of boards, it was possible to implement board configuration logic in the Makefile, but it quickly turned out that this doesn't scale. Also, it is not really needed (at least not any more) - we now have mechanisnms in place, that allow for more efficient code.
The following patch series is an attempt to start some cleanup and reduce the size of the top level Makefile. The solution is neither perfect nor complete - there are quite a lot of boards that resist such a cleanup and need more thorough rework. But it's an initial step, showing what could and should be done, which boards have problems, and why this is the case. Eventually this paves the ground for a more friendly way to add new board configurations.
The idea is to have all "board descriptions" in a single data base in form of a plain text file - no need to add anything to the top level Makefile, and eventually also tools like the "MAKEALL" script can be replaced / simplified because they can fetch all needed board information from that data base.
1/4:
Fix printing of make targets, simplify Makefile
Makefile | 740 ++++++++++++++++++++----------------------------------------- 1 files changed, 243 insertions(+), 497 deletions(-)
2/4:
Makefile: simplify handling of build target names
Makefile | 774 ++++++++++++++++++++++++++++++-------------------------------- mkconfig | 6 +- 2 files changed, 380 insertions(+), 400 deletions(-)
3/4:
Makefile: simplify handling of common board configurations
Makefile | 1436 ++++++++++++++++++++++++++------------------------------------ 1 files changed, 607 insertions(+), 829 deletions(-)
4/4:
Makefile/mkconfig: read simple board configurations from boards.cfg
Makefile | 823 ++---------------------------------------------------------- boards.cfg | 356 ++++++++++++++++++++++++++ mkconfig | 72 ++++-- 3 files changed, 431 insertions(+), 820 deletions(-) create mode 100644 boards.cfg
v2 cover Makefile: rework / cleanup
Quoted 6 lines · Wolfgang Denk
The top level
Makefileis growing and growing. Once, when we supported only a few tens of boards, it was possible to implement board configuration logic in theMakefile, but it quickly turned out that this doesn't scale. Also, it is not really needed (at least not any more) - we now have mechanisnms in place, that allow for more efficient code.
Dear Wolfgang,
Build and tested nios2 on boards.
But old nios-32 arch is broken and will be removed soon. Shall I perform the removal based on current head or after these patches applied?
Best regards,
Thomas
v2 cover Makefile: rework / cleanup
Dear Thomas Chou,
Quoted 2 lines · In message <[email protected]> you wrote:
Build and tested nios2 on boards.
Thanks.
Could you please send a formal "Tested-by:" ?
Quoted 2 lines
But old nios-32 arch is broken and will be removed soon. Shall I perform the removal based on current head or after these patches applied?
I don't really care - the chages are simple enough.
I see your patch - if this is OK with Scott I think we could / should even include this in the upcoming 2006.06 release. Scott, what do you think?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Artificial Intelligence is the study of how to make real computers act like the ones in movies.
v2 cover Makefile: rework / cleanup
Quoted 10 lines · Wolfgang Denk
Quoted 2 lines · In message <[email protected]> you wrote:
But old nios-32 arch is broken and will be removed soon. Shall I perform the removal based on current head or after these patches applied?
I don't really care - the chages are simple enough.
I see your patch - if this is OK with Scott I think we could / should even include this in the upcoming 2006.06 release. Scott, what do you think?
Let's do it asap. Thomas, if you can rebase this to the nios next branch, I'll pull it in and submit a pull request this afternoon that will include the other pending patches.
Thanks,
--Scott
v2 cover Makefile: rework / cleanup
Quoted 13 lines · Scott McNutt
Quoted 11 lines · Wolfgang Denk
Quoted 3 lines · In message <[email protected]> you wrote:
But old nios-32 arch is broken and will be removed soon. Shall I perform the removal based on current head or after these patches applied?
I don't really care - the chages are simple enough.
I see your patch - if this is OK with Scott I think we could / should even include this in the upcoming 2006.06 release. Scott, what do you think?
Quoted 9 lines
Let's do it asap. Thomas, if you can rebase this to the nios next branch, I'll pull it in and submit a pull request this afternoon that will include the other pending patches.
Thanks,
--Scott
Hi Scott,
Great! Please pull the branch which is rebased to nios next.
git://sopc.et.ntust.edu.tw/git/u-boot.git rm_nios32_v2
Cheers,
Thomas
v2 cover Makefile: rework / cleanup
In reply to Wolfgang DenkQuoted 8 lines · Wolfgang Denk
Dear Thomas Chou,
Quoted 1 line · In message <[email protected]> you wrote:
Build and tested nios2 on boards.
Thanks.
Could you please send a formal "Tested-by:" ?
Dear Wolfgang,
I would suggest that we can remove the nios2-generic rule from the Makefile altogether. Then add this to boards.cfg.
nios2-generic nios2 nios2 nios2-generic altera
Instances of nios2-generic can be added to boards.cfg in the same way. Your solution is cleaner.
I have tested this update, too.
Tested-by Thomas Chou <[email protected]>
PATCH v2 1/4 Fix printing of make targets, simplify Makefile
In reply to Wolfgang DenkMake printing the "board names" more useful. So far, we would get output like this;
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot
For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful:
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 740 ++++++++++++++++++++----------------------------------------- 1 files changed, 243 insertions(+), 497 deletions(-)
Makefile +243 -497
@@ -467,7 +467,7 @@ CHANGELOG: unexpand -a | sed -e 's/\s\s*$$//' > $@ include/license.h: tools/bin2header COPYING - cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h + cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h ######################################################################### unconfig:
@@ -518,20 +518,16 @@ digsy_mtc_RAMBOOT_config: unconfig @mkdir -p $(obj)board/digsy_mtc @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp @[ -z "$(findstring RAMBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with RAMBOOT configuration" ; \ - } - @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc + echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp + @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc galaxy5200_LOWBOOT_config \ galaxy5200_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200 + @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 hmi1001_config: unconfig @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
@@ -548,22 +544,15 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { if [ "$(findstring DDR,$@)" ] ; \ + if [ "$(findstring DDR,$@)" ] ; \ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - fi ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + fi @[ -z "$(findstring LOWBOOT08,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ - echo "... with 8 MB flash only" ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube jupiter_config: unconfig @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
@@ -580,17 +569,12 @@ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h - @ $(XECHO) "... DDR memory revision" @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring _PM_,$@)" ] || \ - { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ - $(XECHO) "... with power management (low-power mode) support" ; \ - } + echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube mcc200_config \ mcc200_SDRAM_config \
@@ -606,38 +590,22 @@ prs200_highboot_config \ prs200_highboot_DDR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mcc200 - @[ -n "$(findstring highboot,$@)" ] || \ - { $(XECHO) "... with lowboot configuration" ; \ - } @[ -z "$(findstring highboot,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ - $(XECHO) "... with highboot configuration" ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp @[ -n "$(findstring _SDRAM,$@)" ] || \ - { if [ -n "$(findstring mcc200,$@)" ]; \ - then \ - $(XECHO) "... with DDR" ; \ - else \ - if [ -n "$(findstring _DDR,$@)" ];\ + if [ -n "$(findstring prs200,$@)" ]; \ + then \ + if [ -z "$(findstring _DDR,$@)" ];\ then \ - $(XECHO) "... with DDR" ; \ - else \ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ - $(XECHO) "... with SDRAM" ; \ fi; \ - fi; \ - } + fi @[ -z "$(findstring _SDRAM,$@)" ] || \ - { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with SDRAM" ; \ - } + echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h @[ -z "$(findstring COM12,$@)" ] || \ - { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ - $(XECHO) "... with console on COM12" ; \ - } + echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h @[ -z "$(findstring prs200,$@)" ] || \ - { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ - } + echo "#define CONFIG_PRS200" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 mecp5200_config: unconfig
@@ -657,7 +625,7 @@ MVBC_P_config: unconfig @mkdir -p $(obj)board/mvbc_p @ >$(obj)include/config.h @[ -z "$(findstring MVBC_P,$@)" ] || \ - { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision MVSMR_config: unconfig
@@ -673,10 +641,8 @@ pcm030_LOWBOOT_config: unconfig @mkdir -p $(obj)include $(obj)board/phytec/pcm030 @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec + echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp + @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec pf5200_config: unconfig @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd
@@ -687,14 +653,10 @@ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @[ -z "$(findstring ROMBOOT,$@)" ] || \ - { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ - $(XECHO) "... booting from 8-bit flash" ; \ - } - @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520 + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
@@ -706,9 +668,7 @@ TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... with MPC5200B processor" ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc MINI5200_config \
@@ -725,18 +685,12 @@ Total5200_Rev2_lowboot_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/total5200 @[ -n "$(findstring Rev,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 1 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h @[ -z "$(findstring Rev2_,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 2 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200 + echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp + @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200 cam5200_config \ cam5200_niosflash_config \
@@ -751,37 +705,26 @@ TQM5200_STK100_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/tqc/tqm5200 @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200S on Cam5200" ; \ + { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring niosflash,$@)" ] || \ - { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ - $(XECHO) "... with NIOS flash driver" ; \ - } + echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h @[ -z "$(findstring fo300,$@)" ] || \ - { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200 on FO300" ; \ - } + echo "#define CONFIG_FO300" >>$(obj)include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ - { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200_AC on MiniFAP" ; \ - } + echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h @[ -z "$(findstring STK100,$@)" ] || \ - { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ - $(XECHO) "... on a STK52XX.100 base board" ; \ - } + echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h @[ -z "$(findstring TQM5200_B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @[ -z "$(findstring TQM5200S,$@)" ] || \ - { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ + { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc uc101_config: unconfig
@@ -807,7 +750,7 @@ mpc5121ads_rev2_config \ @if [ "$(findstring rev2,$@)" ] ; then \ echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale + @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale pdm360ng_config: unconfig @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng
@@ -816,17 +759,15 @@ pdm360ng_config: unconfig ## MPC8xx Systems ######################################################################### -Adder_config \ Adder87x_config \ AdderII_config \ +AdderUSB_config \ +Adder_config \ : unconfig @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ - @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) - @$(MKCONFIG) -a Adder powerpc mpc8xx adder - -AdderUSB_config: unconfig - @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder + @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder ADS860_config \ FADS823_config \
@@ -834,7 +775,7 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads AMX860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
@@ -869,10 +810,8 @@ GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ - { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ - $(XECHO) "With reduced H/W feature set (SC)..." ; \ - } - @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t + echo "#define CONFIG_SC" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t GENIETV_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
@@ -895,10 +834,8 @@ ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 + echo "#define CONFIG_100MHz" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 IP860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
@@ -908,30 +845,24 @@ IVML24_128_config \ IVML24_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVML24_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_128_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_256_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm + echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVMS8_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm + echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm kmsupx4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -950,7 +881,7 @@ lwmon_config: unconfig MBX_config \ MBX860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx mgsuvd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -964,14 +895,10 @@ NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETVIA_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 1" ; \ - } + echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 2" ; \ - } - @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia + echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
@@ -979,12 +906,10 @@ NETPHONE_V2_config \ NETPHONE_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETPHONE_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone + echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@@ -998,24 +923,18 @@ NETTA_6412_config \ NETTA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring ISDN_,$@)" ] || \ - { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h @[ -n "$(findstring ISDN_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h @[ -z "$(findstring 6412_,$@)" ] || \ - { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h @[ -n "$(findstring 6412_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta + echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
@@ -1023,28 +942,26 @@ NETTA2_V2_config \ NETTA2_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETTA2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 + echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring CP850,$@)" ] || \ - { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ - echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev1,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev2,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650 + { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } + @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 NX823_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
@@ -1086,19 +1003,14 @@ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _64,$@)" ] || \ - { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 64MHz system clock ..."; \ - } + echo "#define RPXlite_64MHz" >>$(obj)include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with ENV in NVRAM ..."; \ - } - @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw + echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw rmu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
@@ -1161,9 +1073,8 @@ virtlab2_config: unconfig @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display" ; \ } - @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc TTTech_config: unconfig @mkdir -p $(obj)include
@@ -1253,25 +1164,21 @@ glacier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig @mkdir -p $(obj)include - @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h - @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h + @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h + @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave CMS700_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
@@ -1284,7 +1191,7 @@ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
@@ -1387,9 +1294,9 @@ haleakala_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/kilauea @mkdir -p $(obj)nand_spl/board/amcc/kilauea @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc korat_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
@@ -1448,7 +1355,7 @@ ocotea_config: unconfig OCRTC_config \ ORSG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd p3p440_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
@@ -1483,26 +1390,16 @@ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring EVB_BA,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ - $(XECHO) "... BASIC model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h @[ -z "$(findstring EVB_ME,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ - $(XECHO) "... MEDIUM model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h @[ -z "$(findstring EVB_HI,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ - $(XECHO) "... HIGH-END model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
@@ -1530,9 +1427,9 @@ rainier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc sequoia_ramboot_config \ rainier_ramboot_config: unconfig
@@ -1540,10 +1437,10 @@ rainier_ramboot_config: unconfig @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ $(obj)board/amcc/sequoia/config.tmp + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc taihu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
@@ -1577,7 +1474,7 @@ VOM405_config: unconfig W7OLMC_config \ W7OLMG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \
@@ -1641,7 +1538,7 @@ zeus_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska sorcery_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
@@ -1662,16 +1559,14 @@ BMW_config: unconfig CPC45_config \ CPC45_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45 CU824_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
@@ -1739,33 +1634,29 @@ cogent_mpc8260_config: unconfig CPU86_config \ CPU86_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86 CPU87_config \ CPU87_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87 ep8248_config \ ep8248E_config : unconfig - @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248 + @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 ep8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
@@ -1791,7 +1682,7 @@ ISPAN_REVB_config: unconfig @if [ "$(findstring _REVB_,$@)" ] ; then \ echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan + @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan mgcoge_config : unconfig @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
@@ -1823,10 +1714,8 @@ PQ2FADS-ZU_66MHz_lowboot_config \ $(if $(findstring VR,$@), \ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale + echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp + @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
@@ -1838,7 +1727,7 @@ muas3001_config : unconfig @if [ "$(findstring dev,$@)" ] ; then \ echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001 + @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001 # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \
@@ -1857,15 +1746,12 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ - $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ - $(XECHO) "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
@@ -1874,7 +1760,7 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi - @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826 + @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826 PM828_config \ PM828_PCI_config \
@@ -1884,14 +1770,12 @@ PM828_ROMBOOT_PCI_config: unconfig @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - $(XECHO) "... with PCI enabled" ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi - @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828 + @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 ppmc8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
@@ -1900,8 +1784,8 @@ Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ - @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) - @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler + @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler RPXsuper_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
@@ -1947,22 +1831,17 @@ TQM8265_AA_config: unconfig echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ - echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" = "yes" ] ; then \ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... with L2 Cache support" ; \ else \ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" = "60x" ] ; then \ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... with 60x Bus Mode" ; \ else \ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... without 60x Bus Mode" ; \ fi - @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc + @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc TQM8272_config: unconfig @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
@@ -1971,7 +1850,7 @@ VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h - @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk + @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
@@ -1982,7 +1861,7 @@ ZPC1900_config: unconfig astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + @$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro M5208EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
@@ -1999,16 +1878,14 @@ M52277EVB_stmicro_config : unconfig echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with SPANSION boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi - @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale + @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ M5235EVB_Flash16_config \
@@ -2026,7 +1903,7 @@ M5235EVB_Flash32_config: unconfig echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ fi - @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
@@ -2044,13 +1921,13 @@ EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EP2500_config: unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
@@ -2082,7 +1959,7 @@ M5329BFEE_config : unconfig if [ "$${NAND}" != "0" ] ; then \ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale + @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale M5373EVB_config : unconfig @case "$@" in \
@@ -2102,17 +1979,15 @@ M54451EVB_stmicro_config : unconfig if [ "$${FLASH}" = "NOR" ] ; then \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with NOR boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; - @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale + @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale M54455EVB_config \ M54455EVB_atmel_config \
@@ -2136,24 +2011,20 @@ M54455EVB_stm33_config : unconfig echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with INTEL boot..." ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ATMEL boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ - $(XECHO) "... with $${FREQ}Hz input clock" - @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale M5475AFE_config \ M5475BFE_config \
@@ -2186,7 +2057,7 @@ M5475GFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale + @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale M5485AFE_config \ M5485BFE_config \
@@ -2221,7 +2092,7 @@ M5485HFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale + @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale TASREG_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
@@ -2240,26 +2111,23 @@ MPC8313ERDB_NAND_66_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8313erdb @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _NAND_,$@)" ] ; then \ - $(XECHO) -n "...NAND..." ; \ echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale @if [ "$(findstring _NAND_,$@)" ] ; then \ echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ fi ; + @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
@@ -2271,30 +2139,25 @@ MPC832XEMDS_SLAVE_config \ MPC832XEMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale + @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
@@ -2311,7 +2174,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale + @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \
@@ -2320,49 +2183,42 @@ MPC8360EMDS_SLAVE_config \ MPC8360EMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale + @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale MPC8360ERDK_33_config \ MPC8360ERDK_66_config \ MPC8360ERDK_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "... CLKIN 33MHz " ; \ echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ fi ; - @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale + @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale MPC837XEMDS_config \ MPC837XEMDS_HOST_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale + @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
@@ -2373,29 +2229,27 @@ MVBLM7_config: unconfig sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/sheldon/simpc8313 @if [ "$(findstring _LP_,$@)" ] ; then \ - $(XECHO) -n "...Large Page NAND..." ; \ echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SP_,$@)" ] ; then \ - $(XECHO) -n "...Small Page NAND..." ; \ echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc caddy2_config \ vme8349_config: unconfig - @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd + @$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd edb9301_config \ edb9302_config \
@@ -2405,7 +2259,7 @@ edb9307a_config \ edb9312_config \ edb9315_config \ edb9315a_config: unconfig - @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx + @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx ######################################################################### ## MPC85xx Systems
@@ -2419,7 +2273,7 @@ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
@@ -2428,21 +2282,15 @@ MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ -MPC8540EVAL_66_slave_config: unconfig +MPC8540EVAL_66_slave_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) "... 33 MHz PCI" ; \ - else \ + @if [ -z "$(findstring _33_,$@)" ] ; then \ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ - $(XECHO) "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ - $(XECHO) " slave" ; \ - else \ - $(XECHO) " host" ; \ fi - @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval + @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
@@ -2452,9 +2300,8 @@ MPC8541CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale + @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
@@ -2464,18 +2311,16 @@ MPC8548CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale + @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale + @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
@@ -2483,15 +2328,15 @@ MPC8568MDS_config: unconfig MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale P1011RDB_config \ P1011RDB_NAND_config \
@@ -2509,7 +2354,7 @@ P2020RDB_config \ P2020RDB_NAND_config \ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
@@ -2520,19 +2365,19 @@ PM856_config: unconfig sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 sbc8548_config \ sbc8548_PCI_33_config \ sbc8548_PCI_66_config \ sbc8548_PCI_33_PCIE_config \ sbc8548_PCI_66_PCIE_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 socrates_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
@@ -2545,9 +2390,8 @@ stxssa_4M_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _4M_,$@)" ] ; then \ echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ - $(XECHO) "... with 4 MiB flash memory" ; \ fi - @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx + @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx TQM8540_config \ TQM8541_config \
@@ -2559,13 +2403,12 @@ TQM8560_config: unconfig @mkdir -p $(obj)include @BTYPE=$(@:_config=); \ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ - $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; - @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; + @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc XPEDITE5200_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
@@ -2585,9 +2428,8 @@ MPC8641HPCN_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _36BIT_,$@)" ] ; then \ echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ - $(XECHO) "... enabling 36-bit physical addressing." ; \ fi - @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale + @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
@@ -2619,7 +2461,7 @@ ELPPC_config: unconfig EVB64260_config \ EVB64260_750CX_config: unconfig - @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260 + @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
@@ -2635,11 +2477,11 @@ p3m7448_config: unconfig else \ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ fi - @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive + @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive PCIPPC2_config \ PCIPPC6_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2 + @$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2 ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
@@ -2693,7 +2535,7 @@ CPUAT91_RAM_config \ CPUAT91_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 + @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 csb637_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
@@ -2731,21 +2573,17 @@ at91sam9g20ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g20,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G20 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9xeek_nandflash_config \ at91sam9xeek_dataflash_cs0_config \
@@ -2754,15 +2592,12 @@ at91sam9xeek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \
@@ -2775,21 +2610,17 @@ at91sam9g10ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G10 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 at91sam9263ek_norflash_config \ at91sam9263ek_norflash_boot_config \
@@ -2800,19 +2631,15 @@ at91sam9263ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring norflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NOR FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; @if [ "$(findstring norflash_boot,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... and boot from NOR FLASH" ; \ fi; - @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \
@@ -2821,12 +2648,10 @@ at91sam9rlek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 CPU9G20_128M_config \ CPU9G20_config \
@@ -2834,7 +2659,7 @@ CPU9260_128M_config \ CPU9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91 + @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 meesc_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
@@ -2853,19 +2678,15 @@ at91sam9g45ekes_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9m10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9M10G45 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ fi; - @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 otc570_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
@@ -2878,7 +2699,7 @@ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 + @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 TNY_A9G20_NANDFLASH_config \ TNY_A9G20_EEPROM_config \
@@ -2888,7 +2709,7 @@ TNY_A9260_EEPROM_config \ TNY_A9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 + @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2916,32 +2737,17 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ -da830evm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - -davinci_dm355evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci - -davinci_dm355leopard_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci - -davinci_dm365evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci - -davinci_dm6467evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +da830evm_config \ +davinci_dvevm_config \ +davinci_schmoogie_config \ +davinci_sffsdr_config \ +davinci_sonata_config \ +davinci_dm355evm_config \ +davinci_dm355leopard_config \ +davinci_dm365evm_config \ +davinci_dm6467evm_config : unconfig + @$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \ + $(subst davinci_,,$(@:_config=)) davinci davinci guruplug_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2952,7 +2758,7 @@ imx27lite_config: unconfig lpd7a400_config \ lpd7a404_config: unconfig - @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x mv88f6281gtw_ge_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2972,11 +2778,8 @@ nhk8815_onenand_config: unconfig @ > $(obj)include/config.h @if [ "$(findstring _onenand, $@)" ] ; then \ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - $(XECHO) "... configured to boot from OneNand Flash"; \ - else \ - $(XECHO) "... configured to boot from Nand Flash"; \ fi - @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik + @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
@@ -2994,15 +2797,12 @@ omap1610h2_cs_autoboot_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS_AUTO boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
@@ -3018,12 +2818,10 @@ omap730p2_cs3boot_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap rd6281a_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -3059,12 +2857,10 @@ SX1_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout serial"; \ else \ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout usbtty"; \ fi; - @$(MKCONFIG) SX1 arm arm925t sx1 + @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
@@ -3078,25 +2874,22 @@ trab_old_config: unconfig @[ -z "$(findstring _bigram,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 tx25_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
@@ -3233,9 +3026,8 @@ scpu_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring scpu_,$@)" ] ; then \ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ - $(XECHO) "... on SCPU board variant" ; \ fi - @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive + @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
@@ -3246,7 +3038,7 @@ trizepsiv_config : unconfig @if [ "$(findstring polaris,$@)" ] ; then \ echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ fi; - @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv + @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250
@@ -3270,8 +3062,8 @@ zylonite_config : apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx imx31_litekit_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
@@ -3282,7 +3074,7 @@ imx31_phycore_config : unconfig @if [ -n "$(findstring _eet_,$@)" ]; then \ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
@@ -3296,7 +3088,7 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 + @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 mx51evk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
@@ -3315,14 +3107,13 @@ smdk6400_config : unconfig @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ else \ echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ fi - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(subst _noUSB,,$(@:_config=)) arm arm1176 smdk6400 samsung s3c64xx #======================================================================== # i386
@@ -3349,26 +3140,18 @@ sc520_spunk_rel_config : unconfig ## MIPS32 4Kc ######################################################################### -xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) - incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h @[ -z "$(findstring _133MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 133MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h @[ -z "$(findstring _150MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 150MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip + echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a incaip mips mips incaip tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229
@@ -3386,27 +3169,17 @@ vct_platinumavc_small_config \ vct_platinumavc_onenand_config \ vct_platinumavc_onenand_small_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _premium,$@)" ] ; then \ - echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Premium board variant" ; \ - fi - @if [ "$(findstring _platinum_,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Platinum board variant" ; \ - fi - @if [ "$(findstring _platinumavc,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ - $(XECHO) "... on PlatinumAVC board variant" ; \ - fi - @if [ "$(findstring _onenand,$@)" ] ; then \ - echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ - $(XECHO) "... on OneNAND board variant" ; \ - fi - @if [ "$(findstring _small,$@)" ] ; then \ - echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ - $(XECHO) "... stripped down image variant" ; \ - fi - @$(MKCONFIG) -a vct mips mips vct micronas + @[ -z "$(findstring _premium,$@)" ] || \ + echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h + @[ -z "$(findstring _platinum_,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h + @[ -z "$(findstring _platinumavc,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h + @[ -z "$(findstring _onenand,$@)" ] || \ + echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h + @[ -z "$(findstring _small,$@)" ] || \ + echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a vct mips mips vct micronas ######################################################################### ## MIPS32 AU1X00
@@ -3471,36 +3244,24 @@ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ - $(XECHO) "... DNP/EVA2 configuration" ; \ - } + echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv + echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a ADNPESC1 nios nios adnpesc1 ssv DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'safe_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h @[ -z "$(findstring DK1C20_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \
@@ -3508,22 +3269,14 @@ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'safe_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration" ; \ - } + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ - { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ - } + echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h @[ -z "$(findstring DK1S10_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera + echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a DK1S10 nios nios dk1s10 altera ######################################################################### ## Nios-II
@@ -3590,15 +3343,9 @@ bf527-ezkit-v2_config : unconfig atngw100_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x -atstk1002_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1003_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1004_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - +atstk1002_config \ +atstk1003_config \ +atstk1004_config \ atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
@@ -3681,9 +3428,8 @@ sh7785lcr_config : unconfig echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ - $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ fi - @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas + @$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include
Signature · 1 line
1.6.6.1
Wolfgang Denk
AppliedPATCH v2 1/4 Fix printing of make targets, simplify Makefile
Quoted 36 lines · In message <[email protected]> you wrote:
Make printing the "board names" more useful. So far, we would get output like this;
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-bootFor all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful:
$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot
Quoted 4 lines
Signed-off-by Wolfgang Denk <[email protected]>--- Makefile | 740 ++++++++++++++++++++----------------------------------------- 1 files changed, 243 insertions(+), 497 deletions(-)
Applied to "next" branch.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Computers are not intelligent. They only think they are.
PATCH v2 2/4 Makefile: simplify handling of build target names
In reply to Wolfgang DenkInstead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string.
This prepares the ground for forther simplification of the top level Makefile.
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 774 ++++++++++++++++++++++++++++++-------------------------------- mkconfig | 6 +- 2 files changed, 380 insertions(+), 400 deletions(-)
Makefile +377 -397
@@ -486,30 +486,30 @@ unconfig: ## MPC5xx Systems ######################################################################### -canmb_config: unconfig - @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb - cmi_mpc5xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi + @$(MKCONFIG) $@ powerpc mpc5xx cmi PATI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl + @$(MKCONFIG) $@ powerpc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig - @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc BC3450_config: unconfig - @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450 + @$(MKCONFIG) $@ powerpc mpc5xxx bc3450 + +canmb_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx canmb cm5200_config: unconfig - @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200 + @$(MKCONFIG) $@ powerpc mpc5xxx cm5200 cpci5200_config: unconfig - @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx cpci5200 esd digsy_mtc_config \ digsy_mtc_LOWBOOT_config \
@@ -521,7 +521,7 @@ digsy_mtc_RAMBOOT_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp @[ -z "$(findstring RAMBOOT_,$@)" ] || \ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp - @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc + @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc galaxy5200_LOWBOOT_config \ galaxy5200_config: unconfig
@@ -530,7 +530,7 @@ galaxy5200_config: unconfig @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 hmi1001_config: unconfig - @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001 + @$(MKCONFIG) $@ powerpc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \
@@ -555,13 +555,13 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube jupiter_config: unconfig - @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter + @$(MKCONFIG) $@ powerpc mpc5xxx jupiter inka4x0_config: unconfig - @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0 + @$(MKCONFIG) $@ powerpc mpc5xxx inka4x0 ipek01_config: unconfig - @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01 + @$(MKCONFIG) $@ powerpc mpc5xxx ipek01 lite5200b_config \ lite5200b_PM_config \
@@ -609,16 +609,16 @@ prs200_highboot_DDR_config: unconfig @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 mecp5200_config: unconfig - @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx mecp5200 esd motionpro_config: unconfig - @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro + @$(MKCONFIG) $@ powerpc mpc5xxx motionpro mucmc52_config: unconfig - @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52 + @$(MKCONFIG) $@ powerpc mpc5xxx mucmc52 munices_config: unconfig - @$(MKCONFIG) munices powerpc mpc5xxx munices + @$(MKCONFIG) $@ powerpc mpc5xxx munices MVBC_P_config: unconfig @mkdir -p $(obj)include
@@ -626,15 +626,15 @@ MVBC_P_config: unconfig @ >$(obj)include/config.h @[ -z "$(findstring MVBC_P,$@)" ] || \ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision + @$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision MVSMR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/matrix_vision/mvsmr - @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision + @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision o2dnt_config: unconfig - @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt + @$(MKCONFIG) $@ powerpc mpc5xxx o2dnt pcm030_config \ pcm030_LOWBOOT_config: unconfig
@@ -645,7 +645,7 @@ pcm030_LOWBOOT_config: unconfig @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec pf5200_config: unconfig - @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd + @$(MKCONFIG) $@ powerpc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \
@@ -659,10 +659,10 @@ PM520_ROMBOOT_DDR_config: unconfig @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 smmaco4_config: unconfig - @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc spieval_config: unconfig - @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc TB5200_B_config \ TB5200_config: unconfig
@@ -728,20 +728,20 @@ TQM5200_STK100_config: unconfig @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc uc101_config: unconfig - @$(MKCONFIG) uc101 powerpc mpc5xxx uc101 + @$(MKCONFIG) $@ powerpc mpc5xxx uc101 v38b_config: unconfig - @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b + @$(MKCONFIG) $@ powerpc mpc5xxx v38b ######################################################################### ## MPC512x Systems ######################################################################### aria_config: unconfig - @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx + @$(MKCONFIG) $@ powerpc mpc512x aria davedenx mecp5123_config: unconfig - @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd + @$(MKCONFIG) $@ powerpc mpc512x mecp5123 esd mpc5121ads_config \ mpc5121ads_rev2_config \
@@ -753,7 +753,7 @@ mpc5121ads_rev2_config \ @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale pdm360ng_config: unconfig - @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng + @$(MKCONFIG) $@ powerpc mpc512x pdm360ng ######################################################################### ## MPC8xx Systems
@@ -775,70 +775,66 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads + @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads AMX860_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel + @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel c2mon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon + @$(MKCONFIG) $@ powerpc mpc8xx c2mon CCM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens + @$(MKCONFIG) $@ powerpc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent + @$(MKCONFIG) $@ powerpc mpc8xx cogent ELPT860_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX + @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX EP88x_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x + @$(MKCONFIG) $@ powerpc mpc8xx ep88x ESTEEM192E_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e + @$(MKCONFIG) $@ powerpc mpc8xx esteem192e ETX094_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094 + @$(MKCONFIG) $@ powerpc mpc8xx etx094 FLAGADM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm - -xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx flagadm GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ echo "#define CONFIG_SC" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t + @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t GENIETV_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv + @$(MKCONFIG) $@ powerpc mpc8xx genietv GTH_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth + @$(MKCONFIG) $@ powerpc mpc8xx gth hermes_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes + @$(MKCONFIG) $@ powerpc mpc8xx hermes HMI10_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc IAD210_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens - -xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx IAD210 siemens ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ echo "#define CONFIG_100MHz" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 + @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862 IP860_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860 + @$(MKCONFIG) $@ powerpc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \
@@ -865,31 +861,29 @@ IVMS8_config: unconfig @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm kmsupx4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile KUP4K_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup + @$(MKCONFIG) $@ powerpc mpc8xx kup4k kup KUP4X_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup + @$(MKCONFIG) $@ powerpc mpc8xx kup4x kup LANTEC_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec + @$(MKCONFIG) $@ powerpc mpc8xx lantec lwmon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon + @$(MKCONFIG) $@ powerpc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx + @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx mgsuvd_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile MHPC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec - -xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec NETVIA_V2_config \ NETVIA_config: unconfig
@@ -898,9 +892,7 @@ NETVIA_config: unconfig echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia - -xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia NETPHONE_V2_config \ NETPHONE_config: unconfig
@@ -909,9 +901,7 @@ NETPHONE_config: unconfig echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone - -xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) + @$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone NETTA_ISDN_6412_SWAPHOOK_config \ NETTA_ISDN_SWAPHOOK_config \
@@ -934,9 +924,7 @@ NETTA_config: unconfig echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta - -xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) + @$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta NETTA2_V2_config \ NETTA2_config: unconfig
@@ -945,7 +933,7 @@ NETTA2_config: unconfig echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 + @$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \
@@ -964,34 +952,34 @@ CP850_config: unconfig @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 NX823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823 + @$(MKCONFIG) $@ powerpc mpc8xx nx823 pcu_e_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens + @$(MKCONFIG) $@ powerpc mpc8xx pcu_e siemens QS850_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc QS823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc QS860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc + @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc quantum_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum + @$(MKCONFIG) $@ powerpc mpc8xx quantum R360MPI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi + @$(MKCONFIG) $@ powerpc mpc8xx r360mpi RBC823_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823 + @$(MKCONFIG) $@ powerpc mpc8xx rbc823 RPXClassic_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic + @$(MKCONFIG) $@ powerpc mpc8xx RPXClassic RPXlite_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite + @$(MKCONFIG) $@ powerpc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \
@@ -1013,10 +1001,10 @@ RPXlite_DW_config: unconfig @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw rmu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu + @$(MKCONFIG) $@ powerpc mpc8xx rmu RRvision_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision + @$(MKCONFIG) $@ powerpc mpc8xx RRvision RRvision_LCD_config: unconfig @mkdir -p $(obj)include
@@ -1025,31 +1013,31 @@ RRvision_LCD_config: unconfig @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision SM850_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc spc1920_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920 + @$(MKCONFIG) $@ powerpc mpc8xx spc1920 SPD823TS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx + @$(MKCONFIG) $@ powerpc mpc8xx spd8xx stxxtc_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx + @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx svm_sc8xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx + @$(MKCONFIG) $@ powerpc mpc8xx svm_sc8xx SXNI855T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet + @$(MKCONFIG) $@ powerpc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk + @$(MKCONFIG) $@ powerpc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support -xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) +xtract_8xx = $(subst _LCD,,$1) FPS850L_config \ FPS860L_config \
@@ -1083,13 +1071,13 @@ TTTech_config: unconfig @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc uc100_config : unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100 + @$(MKCONFIG) $@ powerpc mpc8xx uc100 v37_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37 + @$(MKCONFIG) $@ powerpc mpc8xx v37 wtk_config: unconfig @mkdir -p $(obj)include
@@ -1100,53 +1088,52 @@ wtk_config: unconfig ######################################################################### ## PPC4xx Systems ######################################################################### -xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) acadia_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc + @$(MKCONFIG) $@ powerpc ppc4xx acadia amcc acadia_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/acadia @mkdir -p $(obj)nand_spl/board/amcc/acadia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc ADCIOP_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd + @$(MKCONFIG) $@ powerpc ppc4xx adciop esd alpr_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive + @$(MKCONFIG) $@ powerpc ppc4xx alpr prodrive AP1000_config:unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix + @$(MKCONFIG) $@ powerpc ppc4xx ap1000 amirix APC405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd + @$(MKCONFIG) $@ powerpc ppc4xx apc405 esd AR405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd + @$(MKCONFIG) $@ powerpc ppc4xx ar405 esd ASH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd + @$(MKCONFIG) $@ powerpc ppc4xx ash405 esd bamboo_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc + @$(MKCONFIG) $@ powerpc ppc4xx bamboo amcc bamboo_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/bamboo @mkdir -p $(obj)nand_spl/board/amcc/bamboo @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc bubinga_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc + @$(MKCONFIG) $@ powerpc ppc4xx bubinga amcc CANBT_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd + @$(MKCONFIG) $@ powerpc ppc4xx canbt esd # Arches, Canyonlands & Glacier use different U-Boot images arches_config \
@@ -1178,53 +1165,53 @@ CATcenter_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave CMS700_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd + @$(MKCONFIG) $@ powerpc ppc4xx cms700 esd CPCI2DP_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd + @$(MKCONFIG) $@ powerpc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd + @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd CPCIISER4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd + @$(MKCONFIG) $@ powerpc ppc4xx cpciiser4 esd CRAYL1_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray + @$(MKCONFIG) $@ powerpc ppc4xx L1 cray csb272_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272 + @$(MKCONFIG) $@ powerpc ppc4xx csb272 csb472_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472 + @$(MKCONFIG) $@ powerpc ppc4xx csb472 DASA_SIM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd + @$(MKCONFIG) $@ powerpc ppc4xx dasa_sim esd dlvision_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys + @$(MKCONFIG) $@ powerpc ppc4xx dlvision gdsys DP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd + @$(MKCONFIG) $@ powerpc ppc4xx dp405 esd DU405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd + @$(MKCONFIG) $@ powerpc ppc4xx du405 esd DU440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd + @$(MKCONFIG) $@ powerpc ppc4xx du440 esd ebony_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc + @$(MKCONFIG) $@ powerpc ppc4xx ebony amcc ERIC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric + @$(MKCONFIG) $@ powerpc ppc4xx eric fx12mm_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@@ -1245,27 +1232,27 @@ fx12mm_config: unconfig @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet G2000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000 + @$(MKCONFIG) $@ powerpc ppc4xx g2000 gdppc440etx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys + @$(MKCONFIG) $@ powerpc ppc4xx gdppc440etx gdsys hcu4_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal + @$(MKCONFIG) $@ powerpc ppc4xx hcu4 netstal hcu5_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal + @$(MKCONFIG) $@ powerpc ppc4xx hcu5 netstal HH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx hh405 esd HUB405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd + @$(MKCONFIG) $@ powerpc ppc4xx hub405 esd icon_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech + @$(MKCONFIG) $@ powerpc ppc4xx icon mosaixtech # Compact-Center(codename intip) & DevCon-Center use different U-Boot images intip_config \
@@ -1276,18 +1263,18 @@ devconcenter_config: unconfig @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys JSE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse + @$(MKCONFIG) $@ powerpc ppc4xx jse KAREF_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst + @$(MKCONFIG) $@ powerpc ppc4xx karef sandburst katmai_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc + @$(MKCONFIG) $@ powerpc ppc4xx katmai amcc # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig - @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc + @$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc kilauea_nand_config \ haleakala_nand_config: unconfig
@@ -1299,26 +1286,26 @@ haleakala_nand_config: unconfig @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc korat_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat + @$(MKCONFIG) $@ powerpc ppc4xx korat luan_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc + @$(MKCONFIG) $@ powerpc ppc4xx luan amcc lwmon5_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5 + @$(MKCONFIG) $@ powerpc ppc4xx lwmon5 makalu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc + @$(MKCONFIG) $@ powerpc ppc4xx makalu amcc mcu25_config: unconfig @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal + @$(MKCONFIG) $@ powerpc ppc4xx mcu25 netstal METROBOX_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst + @$(MKCONFIG) $@ powerpc ppc4xx metrobox sandburst MIP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl + @$(MKCONFIG) $@ powerpc ppc4xx mip405 mpl MIP405T_config: unconfig @mkdir -p $(obj)include
@@ -1327,7 +1314,7 @@ MIP405T_config: unconfig @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl ML2_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2 + @$(MKCONFIG) $@ powerpc ppc4xx ml2 ml507_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1345,41 +1332,41 @@ ml507_config: unconfig > $(obj)board/xilinx/ml507/config.tmp @echo "TEXT_BASE := 0x04000000" \ >> $(obj)board/xilinx/ml507/config.tmp - @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx + @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx neo_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys + @$(MKCONFIG) $@ powerpc ppc4xx neo gdsys ocotea_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc + @$(MKCONFIG) $@ powerpc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd + @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd p3p440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive + @$(MKCONFIG) $@ powerpc ppc4xx p3p440 prodrive PCI405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd + @$(MKCONFIG) $@ powerpc ppc4xx pci405 esd pcs440ep_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep + @$(MKCONFIG) $@ powerpc ppc4xx pcs440ep PIP405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl + @$(MKCONFIG) $@ powerpc ppc4xx pip405 mpl PLU405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd + @$(MKCONFIG) $@ powerpc ppc4xx plu405 esd PMC405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc405 esd PMC405DE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc405de esd PMC440_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd + @$(MKCONFIG) $@ powerpc ppc4xx pmc440 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \
@@ -1399,19 +1386,19 @@ PPChameleonEVB_HI_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h - @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd + @$(MKCONFIG) $@ powerpc ppc4xx quad100hd redwood_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc + @$(MKCONFIG) $@ powerpc ppc4xx redwood amcc sbc405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405 + @$(MKCONFIG) $@ powerpc ppc4xx sbc405 sc3_config:unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3 + @$(MKCONFIG) $@ powerpc ppc4xx sc3 sequoia_config \ rainier_config: unconfig
@@ -1443,10 +1430,10 @@ rainier_ramboot_config: unconfig @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc taihu_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc + @$(MKCONFIG) $@ powerpc ppc4xx taihu amcc taishan_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc + @$(MKCONFIG) $@ powerpc ppc4xx taishan amcc v5fx30teval_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1455,7 +1442,7 @@ v5fx30teval_config: unconfig > $(obj)board/avnet/v5fx30teval/config.tmp @echo "TEXT_BASE := 0x03000000" \ >> $(obj)board/avnet/v5fx30teval/config.tmp - @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet + @$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet v5fx30teval_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@@ -1467,22 +1454,22 @@ v5fx30teval_flash_config: unconfig @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet VOH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx voh405 esd VOM405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd + @$(MKCONFIG) $@ powerpc ppc4xx vom405 esd W7OLMC_config \ W7OLMG_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o + @$(MKCONFIG) $@ powerpc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \ sycamore_config: unconfig - @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc + @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc WUH405_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd + @$(MKCONFIG) $@ powerpc ppc4xx wuh405 esd xilinx-ppc405-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@@ -1517,7 +1504,7 @@ xilinx-ppc440-generic_config: unconfig @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx XPEDITE1000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes + @$(MKCONFIG) $@ powerpc ppc4xx xpedite1000 xes yosemite_config \ yellowstone_config: unconfig
@@ -1527,10 +1514,10 @@ yellowstone_config: unconfig @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc yucca_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc + @$(MKCONFIG) $@ powerpc ppc4xx yucca amcc zeus_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus + @$(MKCONFIG) $@ powerpc ppc4xx zeus ######################################################################### ## MPC8220 Systems
@@ -1538,24 +1525,23 @@ zeus_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska + @$(MKCONFIG) $@ powerpc mpc8220 alaska sorcery_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery + @$(MKCONFIG) $@ powerpc mpc8220 sorcery ######################################################################### ## MPC824x Systems ######################################################################### -xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000 + @$(MKCONFIG) $@ powerpc mpc824x a3000 barco_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco + @$(MKCONFIG) $@ powerpc mpc824x barco BMW_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw + @$(MKCONFIG) $@ powerpc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig
@@ -1566,22 +1552,22 @@ CPC45_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45 + @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45 CU824_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824 + @$(MKCONFIG) $@ powerpc mpc824x cu824 debris_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin + @$(MKCONFIG) $@ powerpc mpc824x debris etin eXalion_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion + @$(MKCONFIG) $@ powerpc mpc824x eXalion HIDDEN_DRAGON_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon + @$(MKCONFIG) $@ powerpc mpc824x hidden_dragon kvme080_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin + @$(MKCONFIG) $@ powerpc mpc824x kvme080 etin # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as # time permits.
@@ -1596,41 +1582,41 @@ linkstation_HGLAN_config: unconfig @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation MOUSSE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse + @$(MKCONFIG) $@ powerpc mpc824x mousse MUSENKI_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki + @$(MKCONFIG) $@ powerpc mpc824x musenki MVBLUE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue + @$(MKCONFIG) $@ powerpc mpc824x mvblue OXC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc + @$(MKCONFIG) $@ powerpc mpc824x oxc PN62_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62 + @$(MKCONFIG) $@ powerpc mpc824x pn62 Sandpoint8240_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint + @$(MKCONFIG) $@ powerpc mpc824x sandpoint Sandpoint8245_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint + @$(MKCONFIG) $@ powerpc mpc824x sandpoint sbc8240_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240 + @$(MKCONFIG) $@ powerpc mpc824x sbc8240 utx8245_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245 + @$(MKCONFIG) $@ powerpc mpc824x utx8245 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc + @$(MKCONFIG) $@ powerpc mpc8260 atc cogent_mpc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent + @$(MKCONFIG) $@ powerpc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig
@@ -1641,7 +1627,7 @@ CPU86_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86 + @$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86 CPU87_config \ CPU87_ROMBOOT_config: unconfig
@@ -1652,29 +1638,29 @@ CPU87_ROMBOOT_config: unconfig echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; - @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87 + @$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87 ep8248_config \ ep8248E_config : unconfig @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 ep8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260 + @$(MKCONFIG) $@ powerpc mpc8260 ep8260 ep82xxm_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm + @$(MKCONFIG) $@ powerpc mpc8260 ep82xxm gw8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260 + @$(MKCONFIG) $@ powerpc mpc8260 gw8260 hymod_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod + @$(MKCONFIG) $@ powerpc mpc8260 hymod IDS8247_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247 + @$(MKCONFIG) $@ powerpc mpc8260 ids8247 IPHASE4539_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539 + @$(MKCONFIG) $@ powerpc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig
@@ -1685,7 +1671,7 @@ ISPAN_REVB_config: unconfig @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan mgcoge_config : unconfig - @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile + @$(MKCONFIG) $@ powerpc mpc8260 mgcoge keymile MPC8260ADS_config \ MPC8260ADS_lowboot_config \
@@ -1718,7 +1704,7 @@ PQ2FADS-ZU_66MHz_lowboot_config \ @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale + @$(MKCONFIG) $@ powerpc mpc8260 mpc8266ads freescale muas3001_dev_config \ muas3001_config : unconfig
@@ -1778,7 +1764,7 @@ PM828_ROMBOOT_PCI_config: unconfig @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 ppmc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260 + @$(MKCONFIG) $@ powerpc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig
@@ -1788,19 +1774,19 @@ Rattler_config: unconfig @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler RPXsuper_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper + @$(MKCONFIG) $@ powerpc mpc8260 rpxsuper rsdproto_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto + @$(MKCONFIG) $@ powerpc mpc8260 rsdproto sacsng_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng + @$(MKCONFIG) $@ powerpc mpc8260 sacsng sbc8260_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260 + @$(MKCONFIG) $@ powerpc mpc8260 sbc8260 SCM_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens + @$(MKCONFIG) $@ powerpc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \
@@ -1853,7 +1839,7 @@ VoVPN-GW_100MHz_config: unconfig @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900 + @$(MKCONFIG) $@ powerpc mpc8260 zpc1900 ######################################################################### ## Coldfire
@@ -1861,10 +1847,10 @@ ZPC1900_config: unconfig astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro M5208EVBE_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5208evbe freescale M52277EVB_config \ M52277EVB_spansion_config \
@@ -1906,16 +1892,16 @@ M5235EVB_Flash32_config: unconfig @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5249evb freescale M5253DEMO_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5253demo freescale M5253EVBE_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5253evbe freescale cobra5272_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 + @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include
@@ -1930,25 +1916,25 @@ EB+MCF-EV123_internal_config : unconfig @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EP2500_config: unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury + @$(MKCONFIG) $@ m68k mcf52x2 ep2500 Mercury idmr_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr + @$(MKCONFIG) $@ m68k mcf52x2 idmr M5271EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5271evb freescale M5272C3_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5272c3 freescale M5275EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5275evb freescale M5282EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale + @$(MKCONFIG) $@ m68k mcf52x2 m5282evb freescale M53017EVB_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale + @$(MKCONFIG) $@ m68k mcf532x m53017evb freescale M5329AFEE_config \ M5329BFEE_config : unconfig
@@ -2095,7 +2081,7 @@ M5485HFE_config : unconfig @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale TASREG_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd + @$(MKCONFIG) $@ m68k mcf52x2 tasreg esd ######################################################################### ## MPC83xx Systems
@@ -2127,10 +2113,10 @@ MPC8313ERDB_NAND_66_config: unconfig MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale + @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig - @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc8323erdb freescale MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \
@@ -2160,7 +2146,7 @@ MPC832XEMDS_ATM_config: unconfig @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \
@@ -2221,15 +2207,15 @@ MPC837XEMDS_HOST_config: unconfig @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig - @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale + @$(MKCONFIG) $@ powerpc mpc83xx mpc837xerdb freescale MVBLM7_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision + @$(MKCONFIG) $@ powerpc mpc83xx mvblm7 matrix_vision sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 + @$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig
@@ -2245,11 +2231,11 @@ SIMPC8313_SP_config: unconfig @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon TQM834x_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc + @$(MKCONFIG) $@ powerpc mpc83xx tqm834x tqc caddy2_config \ vme8349_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd + @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd edb9301_config \ edb9302_config \
@@ -2259,24 +2245,24 @@ edb9307a_config \ edb9312_config \ edb9315_config \ edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx + @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx ######################################################################### ## MPC85xx Systems ######################################################################### ATUM8548_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548 + @$(MKCONFIG) $@ powerpc mpc85xx atum8548 MPC8536DS_NAND_config \ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8540ads freescale MPC8540EVAL_config \ MPC8540EVAL_33_config \
@@ -2293,7 +2279,7 @@ MPC8540EVAL_66_slave_config: unconfig @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval MPC8560ADS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8560ads freescale MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig
@@ -2304,7 +2290,7 @@ MPC8541CDS_config: unconfig @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8544ds freescale MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig
@@ -2323,20 +2309,20 @@ MPC8555CDS_config: unconfig @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale + @$(MKCONFIG) $@ powerpc mpc85xx mpc8568mds freescale MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale + @$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale P1011RDB_config \ P1011RDB_NAND_config \
@@ -2354,36 +2340,36 @@ P2020RDB_config \ P2020RDB_NAND_config \ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale PM854_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854 + @$(MKCONFIG) $@ powerpc mpc85xx pm854 PM856_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856 + @$(MKCONFIG) $@ powerpc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560 sbc8548_config \ sbc8548_PCI_33_config \ sbc8548_PCI_66_config \ sbc8548_PCI_33_PCIE_config \ sbc8548_PCI_66_PCIE_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 + @$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560 socrates_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates + @$(MKCONFIG) $@ powerpc mpc85xx socrates stxgp3_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx + @$(MKCONFIG) $@ powerpc mpc85xx stxgp3 stx stxssa_config \ stxssa_4M_config: unconfig
@@ -2411,17 +2397,17 @@ TQM8560_config: unconfig @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc XPEDITE5200_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes + @$(MKCONFIG) $@ powerpc mpc85xx xpedite5200 xes XPEDITE5370_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes + @$(MKCONFIG) $@ powerpc mpc85xx xpedite5370 xes ######################################################################### ## MPC86xx Systems ######################################################################### MPC8610HPCD_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale + @$(MKCONFIG) $@ powerpc mpc86xx mpc8610hpcd freescale MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig
@@ -2432,42 +2418,42 @@ MPC8641HPCN_config: unconfig @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d + @$(MKCONFIG) $@ powerpc mpc86xx sbc8641d XPEDITE5170_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes + @$(MKCONFIG) $@ powerpc mpc86xx xpedite5170 xes ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI + @$(MKCONFIG) $@ powerpc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec + @$(MKCONFIG) $@ powerpc 74xx_7xx bab7xx eltec CPCI750_config: unconfig - @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd + @$(MKCONFIG) $@ powerpc 74xx_7xx cpci750 esd DB64360_config: unconfig - @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx db64360 Marvell DB64460_config: unconfig - @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx db64460 Marvell ELPPC_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec + @$(MKCONFIG) $@ powerpc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale + @$(MKCONFIG) $@ powerpc 74xx_7xx mpc7448hpc2 freescale P3G4_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 + @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 p3m750_config \ p3m7448_config: unconfig
@@ -2481,13 +2467,13 @@ p3m7448_config: unconfig PCIPPC2_config \ PCIPPC6_config: unconfig - @$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2 + @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 ppmc7xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx + @$(MKCONFIG) $@ powerpc 74xx_7xx ppmc7xx ZUMA_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 + @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 #======================================================================== # ARM
@@ -2497,39 +2483,39 @@ ZUMA_config: unconfig ######################################################################### assabet_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 assabet + @$(MKCONFIG) $@ arm sa1100 assabet dnp1110_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 + @$(MKCONFIG) $@ arm sa1100 dnp1110 gcplus_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus + @$(MKCONFIG) $@ arm sa1100 gcplus lart_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 lart + @$(MKCONFIG) $@ arm sa1100 lart shannon_config : unconfig - @$(MKCONFIG) $(@:_config=) arm sa1100 shannon + @$(MKCONFIG) $@ arm sa1100 shannon ######################################################################### ## ARM92xT Systems ######################################################################### a320evb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320 + @$(MKCONFIG) $@ arm arm920t a320evb faraday a320 ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### at91rm9200dk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t at91rm9200dk atmel at91rm9200 at91rm9200ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t at91rm9200ek atmel at91rm9200 cmc_pu2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t cmc_pu2 NULL at91rm9200 CPUAT91_RAM_config \ CPUAT91_config : unconfig
@@ -2538,29 +2524,29 @@ CPUAT91_config : unconfig @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 csb637_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t csb637 NULL at91rm9200 eb_cpux9k2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91 + @$(MKCONFIG) $@ arm arm920t eb_cpux9k2 BuS at91 kb9202_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t kb9202 NULL at91rm9200 m501sk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t m501sk NULL at91rm9200 mp2usb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + @$(MKCONFIG) $@ arm arm920t mp2usb NULL at91rm9200 ######################################################################### ## ARM926EJ-S Systems ######################################################################### afeb9260_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 + @$(MKCONFIG) $@ arm arm926ejs afeb9260 NULL at91 at91cap9adk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 + @$(MKCONFIG) $@ arm arm926ejs at91cap9adk atmel at91 at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \
@@ -2662,10 +2648,10 @@ CPU9260_config : unconfig @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 meesc_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + @$(MKCONFIG) $@ arm arm926ejs meesc esd at91 pm9261_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 + @$(MKCONFIG) $@ arm arm926ejs pm9261 ronetix at91 at91sam9m10g45ek_nandflash_config \ at91sam9m10g45ek_dataflash_config \
@@ -2689,10 +2675,10 @@ at91sam9g45ekes_config : unconfig @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 otc570_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91 + @$(MKCONFIG) $@ arm arm926ejs otc570 esd at91 pm9263_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 + @$(MKCONFIG) $@ arm arm926ejs pm9263 ronetix at91 SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \
@@ -2746,31 +2732,31 @@ davinci_dm355evm_config \ davinci_dm355leopard_config \ davinci_dm365evm_config \ davinci_dm6467evm_config : unconfig - @$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \ + @$(MKCONFIG) -n $@ $@ arm arm926ejs \ $(subst davinci_,,$(@:_config=)) davinci davinci guruplug_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood magnesium_config \ imx27lite_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 + @$(MKCONFIG) $@ arm arm926ejs imx27lite logicpd mx27 lpd7a400_config \ lpd7a404_config: unconfig - @$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) $@ arm lh7a40x lpd7a40x mv88f6281gtw_ge_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood mx1ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx + @$(MKCONFIG) $@ arm arm920t mx1ads NULL imx mx1fs2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx + @$(MKCONFIG) $@ arm arm920t mx1fs2 NULL imx netstar_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t netstar + @$(MKCONFIG) $@ arm arm925t netstar nhk8815_config \ nhk8815_onenand_config: unconfig
@@ -2782,7 +2768,7 @@ nhk8815_onenand_config: unconfig @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti + @$(MKCONFIG) $@ arm arm925t omap1510inn ti xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
@@ -2805,12 +2791,10 @@ omap1610h2_cs_autoboot_config: unconfig @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap omap5912osk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap + @$(MKCONFIG) $@ arm arm926ejs omap5912osk ti omap openrd_base_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood - -xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood omap730p2_config \ omap730p2_cs0boot_config \
@@ -2821,36 +2805,36 @@ omap730p2_cs3boot_config : unconfig else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ fi; - @$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap + @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap rd6281a_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood sbc2410x_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + @$(MKCONFIG) $@ arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx + @$(MKCONFIG) $@ arm arm920t scb9328 NULL imx sheevaplug_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood smdk2400_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 + @$(MKCONFIG) $@ arm arm920t smdk2400 samsung s3c24x0 smdk2410_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 + @$(MKCONFIG) $@ arm arm920t smdk2410 samsung s3c24x0 spear300_config \ spear310_config \ spear320_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear spear600_config : unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear suen3_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood + @$(MKCONFIG) $@ arm arm926ejs km_arm keymile kirkwood SX1_stdout_serial_config \ SX1_config: unconfig
@@ -2863,8 +2847,6 @@ SX1_config: unconfig @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM -xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) - trab_config \ trab_bigram_config \ trab_bigflash_config \
@@ -2885,24 +2867,24 @@ trab_old_config: unconfig echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a trab arm arm920t trab NULL s3c24x0 tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 + @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 VCMA9_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 + @$(MKCONFIG) $@ arm arm920t vcma9 mpl s3c24x0 ######################################################################### # ARM supplied Versatile development boards ######################################################################### cm4008_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 + @$(MKCONFIG) $@ arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + @$(MKCONFIG) $@ arm arm920t cm41xx NULL ks8695 versatile_config \ versatileab_config \
@@ -2910,116 +2892,116 @@ versatilepb_config : unconfig @board/armltd/versatile/split_by_variant.sh $@ voiceblue_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue + @$(MKCONFIG) $@ arm arm925t voiceblue ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave + @$(MKCONFIG) $@ arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t armadillo + @$(MKCONFIG) $@ arm arm720t armadillo ep7312_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 + @$(MKCONFIG) $@ arm arm720t ep7312 impa7_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t impa7 + @$(MKCONFIG) $@ arm arm720t impa7 modnet50_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 + @$(MKCONFIG) $@ arm arm720t modnet50 evb4510_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b + @$(MKCONFIG) $@ arm arm720t evb4510 NULL s3c4510b lpc2292sodimm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 + @$(MKCONFIG) $@ arm arm720t lpc2292sodimm NULL lpc2292 SMN42_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 + @$(MKCONFIG) $@ arm arm720t SMN42 siemens lpc2292 ######################################################################### ## ARM CORTEX Systems ######################################################################### devkit8000_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 devkit8000 timll omap3 omap3_beagle_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 beagle ti omap3 omap3_overo_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 overo NULL omap3 omap3_evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 evm ti omap3 omap3_pandora_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 pandora NULL omap3 omap3_sdp3430_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 sdp3430 ti omap3 omap3_zoom1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 zoom1 logicpd omap3 omap3_zoom2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 zoom2 logicpd omap3 smdkc100_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx + @$(MKCONFIG) $@ arm arm_cortexa8 smdkc100 samsung s5pc1xx ######################################################################### ## XScale Systems ######################################################################### actux1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux1 + @$(MKCONFIG) $@ arm ixp actux1 actux2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux2 + @$(MKCONFIG) $@ arm ixp actux2 actux3_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux3 + @$(MKCONFIG) $@ arm ixp actux3 actux4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp actux4 + @$(MKCONFIG) $@ arm ixp actux4 cerf250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa cerf250 + @$(MKCONFIG) $@ arm pxa cerf250 cradle_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa cradle + @$(MKCONFIG) $@ arm pxa cradle csb226_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa csb226 + @$(MKCONFIG) $@ arm pxa csb226 delta_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa delta + @$(MKCONFIG) $@ arm pxa delta innokom_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa innokom + @$(MKCONFIG) $@ arm pxa innokom ixdp425_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $@ arm ixp ixdp425 ixdpg425_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $@ arm ixp ixdp425 lubbock_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa lubbock + @$(MKCONFIG) $@ arm pxa lubbock pleb2_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa pleb2 + @$(MKCONFIG) $@ arm pxa pleb2 logodl_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa logodl + @$(MKCONFIG) $@ arm pxa logodl pdnb3_config \ scpu_config: unconfig
@@ -3030,7 +3012,7 @@ scpu_config: unconfig @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig - @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp + @$(MKCONFIG) $@ arm pxa pxa255_idp polaris_config \ trizepsiv_config : unconfig
@@ -3041,19 +3023,19 @@ trizepsiv_config : unconfig @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa wepep250 + @$(MKCONFIG) $@ arm pxa wepep250 xaeniax_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xaeniax + @$(MKCONFIG) $@ arm pxa xaeniax xm250_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xm250 + @$(MKCONFIG) $@ arm pxa xm250 xsengine_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa xsengine + @$(MKCONFIG) $@ arm pxa xsengine zylonite_config : - @$(MKCONFIG) $(@:_config=) arm pxa zylonite + @$(MKCONFIG) $@ arm pxa zylonite ######################################################################### ## ARM1136 Systems
@@ -3063,10 +3045,10 @@ apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx + @$(MKCONFIG) $@ arm arm1136 apollon NULL omap24xx imx31_litekit_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 + @$(MKCONFIG) $@ arm arm1136 imx31_litekit logicpd mx31 imx31_phycore_eet_config \ imx31_phycore_config : unconfig
@@ -3077,7 +3059,7 @@ imx31_phycore_config : unconfig @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 + @$(MKCONFIG) $@ arm arm1136 mx31ads freescale mx31 mx31pdk_config \ mx31pdk_nand_config : unconfig
@@ -3091,13 +3073,13 @@ mx31pdk_nand_config : unconfig @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 mx51evk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + @$(MKCONFIG) $@ arm arm_cortexa8 mx51evk freescale mx51 omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx + @$(MKCONFIG) $@ arm arm1136 omap2420h4 ti omap24xx qong_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 + @$(MKCONFIG) $@ arm arm1136 qong davedenx mx31 ######################################################################### ## ARM1176 Systems
@@ -3122,16 +3104,16 @@ smdk6400_config : unconfig ## AMD SC520 CDP ######################################################################### eNET_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 + @$(MKCONFIG) $@ i386 i386 eNET NULL sc520 sc520_cdp_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_cdp NULL sc520 sc520_spunk_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 sc520_spunk_rel_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 #======================================================================== # MIPS
@@ -3154,7 +3136,7 @@ incaip_config: unconfig @$(MKCONFIG) -n $@ -a incaip mips mips incaip tb0229_config: unconfig - @$(MKCONFIG) $(@:_config=) mips mips tb0229 + @$(MKCONFIG) $@ mips mips tb0229 vct_premium_config \ vct_premium_small_config \
@@ -3213,7 +3195,7 @@ dbau1550_el_config : unconfig gth2_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h - @$(MKCONFIG) -a gth2 mips mips gth2 + @$(MKCONFIG) -a $@ mips mips gth2 pb1000_config : unconfig @mkdir -p $(obj)include
@@ -3230,7 +3212,7 @@ qemu_mips_config : unconfig ######################################################################### purple_config : unconfig - @$(MKCONFIG) $(@:_config=) mips mips purple + @$(MKCONFIG) $@ mips mips purple #======================================================================== # Nios
@@ -3283,33 +3265,32 @@ DK1S10_config: unconfig ######################################################################### EP1C20_config : unconfig - @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera + @$(MKCONFIG) $@ nios2 nios2 ep1c20 altera EP1S10_config : unconfig - @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera + @$(MKCONFIG) $@ nios2 nios2 ep1s10 altera EP1S40_config : unconfig - @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera + @$(MKCONFIG) $@ nios2 nios2 ep1s40 altera PK1C20_config : unconfig - @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent + @$(MKCONFIG) $@ nios2 nios2 pk1c20 psyent PCI5441_config : unconfig - @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent + @$(MKCONFIG) $@ nios2 nios2 pci5441 psyent # nios2 generic boards NIOS2_GENERIC = nios2-generic $(NIOS2_GENERIC:%=%_config) : unconfig - @$(MKCONFIG) $(@:_config=) nios2 nios2 nios2-generic altera + @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera #======================================================================== ## Microblaze #======================================================================== microblaze-generic_config: unconfig - @mkdir -p $(obj)include - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx + @$(MKCONFIG) $@ microblaze microblaze microblaze-generic xilinx #======================================================================== # Blackfin
@@ -3330,7 +3311,7 @@ BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04 BFIN_BOARDS += ibf-dsp561 $(BFIN_BOARDS:%=%_config) : unconfig - @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) + @$(MKCONFIG) $@ blackfin blackfin $(@:_config=) bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
@@ -3341,22 +3322,22 @@ bf527-ezkit-v2_config : unconfig #======================================================================== atngw100_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x + @$(MKCONFIG) $@ avr32 at32ap atngw100 atmel at32ap700x atstk1002_config \ atstk1003_config \ atstk1004_config \ atstk1006_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x + @$(MKCONFIG) $@ avr32 at32ap atstk1000 atmel at32ap700x favr-32-ezkit_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x + @$(MKCONFIG) $@ avr32 at32ap favr-32-ezkit earthlcd at32ap700x hammerhead_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x + @$(MKCONFIG) $@ avr32 at32ap hammerhead miromico at32ap700x mimc200_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x + @$(MKCONFIG) $@ avr32 at32ap mimc200 mimc at32ap700x #======================================================================== # SH3 (SuperH)
@@ -3368,7 +3349,7 @@ mimc200_config : unconfig rsk7203_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas + @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas ######################################################################### ## sh3 (Renesas SuperH)
@@ -3377,12 +3358,12 @@ rsk7203_config: unconfig mpr2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 + @$(MKCONFIG) -a $@ sh sh3 mpr2 ms7720se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se + @$(MKCONFIG) -a $@ sh sh3 ms7720se ######################################################################### ## sh4 (Renesas SuperH)
@@ -3391,34 +3372,33 @@ ms7720se_config: unconfig MigoR_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas + @$(MKCONFIG) -a $@ sh sh4 MigoR renesas ms7750se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se + @$(MKCONFIG) -a $@ sh sh4 ms7750se ms7722se_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se + @$(MKCONFIG) -a $@ sh sh4 ms7722se r2dplus_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas + @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas + @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas + @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas -xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) sh7785lcr_32bit_config \ sh7785lcr_config : unconfig @mkdir -p $(obj)include
@@ -3429,17 +3409,17 @@ sh7785lcr_config : unconfig echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ fi - @$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas + @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas + @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas espt_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 espt + @$(MKCONFIG) -a $@ sh sh4 espt #======================================================================== # SPARC
@@ -3451,20 +3431,20 @@ espt_config : unconfig # Gaisler GR-XC3S-1500 board gr_xc3s_1500_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_xc3s_1500 gaisler # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system gr_cpci_ax2000_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_cpci_ax2000 gaisler # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS # Development board Stratix II edition, FPGA Device EP2S60. gr_ep2s60_config: unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler + @$(MKCONFIG) $@ sparc leon3 gr_ep2s60 gaisler # Gaisler LEON3 GRSIM simulator grsim_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler + @$(MKCONFIG) $@ sparc leon3 grsim gaisler ######################################################################### ## LEON2
@@ -3472,7 +3452,7 @@ grsim_config : unconfig # Gaisler LEON2 GRSIM simulator grsim_leon2_config : unconfig - @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler + @$(MKCONFIG) $@ sparc leon2 grsim_leon2 gaisler ######################################################################### #########################################################################
mkconfig +3 -3
@@ -16,13 +16,13 @@ while [ $# -gt 0 ] ; do case "$1" in --) shift ; break ;; -a) shift ; APPEND=yes ;; - -n) shift ; BOARD_NAME="${1%%_config}" ; shift ;; + -n) shift ; BOARD_NAME="${1%_config}" ; shift ;; -t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;; *) break ;; esac done -[ "${BOARD_NAME}" ] || BOARD_NAME="$1" +[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}" [ $# -lt 4 ] && exit 1 [ $# -gt 6 ] && exit 1
@@ -102,7 +102,7 @@ done cat << EOF >> config.h #define CONFIG_BOARDDIR board/$BOARDDIR #include <config_defaults.h> -#include <configs/$1.h> +#include <configs/${BOARDNAME}.h> #include <asm/config.h> EOF
Signature · 1 line
1.6.6.1
Wolfgang Denk
AppliedPATCH v2 2/4 Makefile: simplify handling of build target names
Dear Wolfgang Denk,
Quoted 11 lines · In message <[email protected]> you wrote:
Instead of stripping the "
_config" part from the make target names in each call of the "mkconfig" script let this script strip the string.This prepares the ground for forther simplification of the top level
Makefile.Signed-off-by Wolfgang Denk <[email protected]>--- Makefile | 774 ++++++++++++++++++++++++++++++-------------------------------- mkconfig | 6 +- 2 files changed, 380 insertions(+), 400 deletions(-)
Applied to "next" branch.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No journaling file system can recover your data if the disk dies.
- Steve Rago in <[email protected]>PATCH v2 3/4 Makefile: simplify handling of common board configurations
In reply to Wolfgang DenkMany boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup.
Signed-off-by Wolfgang Denk <[email protected]>
--- Makefile | 1436 ++++++++++++++++++++++++++------------------------------------ 1 files changed, 607 insertions(+), 829 deletions(-)
Makefile +607 -829
@@ -478,6 +478,12 @@ unconfig: %: %_config $(MAKE) +# +# Functions to generate common board directory names +# +lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') +ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') + #======================================================================== # PowerPC #========================================================================
@@ -496,21 +502,37 @@ PATI_config: unconfig ## MPC5xxx Systems ######################################################################### -aev_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - -BC3450_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx bc3450 - -canmb_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx canmb - -cm5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx cm5200 +# generic boards +################ +BC3450_config \ +canmb_config \ +cm5200_config \ +hmi1001_config \ +jupiter_config \ +inka4x0_config \ +ipek01_config \ +motionpro_config\ +mucmc52_config \ +munices_config \ +o2dnt_config \ +uc101_config \ +v38b_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### +cpci5200_config \ +mecp5200_config \ +pf5200_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) esd -cpci5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx cpci5200 esd +aev_config \ +smmaco4_config \ +spieval_config: unconfig + @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc +# special boards +################ digsy_mtc_config \ digsy_mtc_LOWBOOT_config \ digsy_mtc_RAMBOOT_config: unconfig
@@ -529,9 +551,6 @@ galaxy5200_config: unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 -hmi1001_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx hmi1001 - Lite5200_config \ Lite5200_LOWBOOT_config \ Lite5200_LOWBOOT08_config \
@@ -554,15 +573,6 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube -jupiter_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx jupiter - -inka4x0_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx inka4x0 - -ipek01_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx ipek01 - lite5200b_config \ lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig
@@ -608,18 +618,6 @@ prs200_highboot_DDR_config: unconfig echo "#define CONFIG_PRS200" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 -mecp5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx mecp5200 esd - -motionpro_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx motionpro - -mucmc52_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx mucmc52 - -munices_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx munices - MVBC_P_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mvbc_p
@@ -633,9 +631,6 @@ MVSMR_config: unconfig @mkdir -p $(obj)board/matrix_vision/mvsmr @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision -o2dnt_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx o2dnt - pcm030_config \ pcm030_LOWBOOT_config: unconfig @mkdir -p $(obj)include $(obj)board/phytec/pcm030
@@ -644,9 +639,6 @@ pcm030_LOWBOOT_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec -pf5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx pf5200 esd - PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \
@@ -658,12 +650,6 @@ PM520_ROMBOOT_DDR_config: unconfig echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 -smmaco4_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - -spieval_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include
@@ -727,22 +713,25 @@ TQM5200_STK100_config: unconfig echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc -uc101_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx uc101 - -v38b_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx v38b - ######################################################################### ## MPC512x Systems ######################################################################### +# generic boards +################ +pdm360ng_config: unconfig + @$(MKCONFIG) $@ powerpc mpc512x $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### aria_config: unconfig @$(MKCONFIG) $@ powerpc mpc512x aria davedenx mecp5123_config: unconfig @$(MKCONFIG) $@ powerpc mpc512x mecp5123 esd +# special boards +################ mpc5121ads_config \ mpc5121ads_rev2_config \ : unconfig
@@ -752,13 +741,84 @@ mpc5121ads_rev2_config \ fi @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale -pdm360ng_config: unconfig - @$(MKCONFIG) $@ powerpc mpc512x pdm360ng - ######################################################################### ## MPC8xx Systems ######################################################################### +# generic boards +################ + +c2mon_config \ +EP88x_config \ +ESTEEM192E_config \ +ETX094_config \ +FLAGADM_config \ +GENIETV_config \ +GTH_config \ +hermes_config \ +IP860_config \ +LANTEC_config \ +lwmon_config \ +NX823_config \ +quantum_config \ +R360MPI_config \ +RBC823_config \ +rmu_config \ +spc1920_config \ +svm_sc8xx_config \ +uc100_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) + +RPXClassic_config \ +RPXlite_config \ +RRvision_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) + +# vendor specific boards (sorted by vendor) +########################################### + +MHPC_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec + +TOP860_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx top860 emk + +kmsupx4_config \ +mgsuvd_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile + +KUP4K_config \ +KUP4X_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) kup + +ELPT860_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX + +stxxtc_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx + +HMI10_config \ +SM850_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc + +CCM_config \ +IAD210_config \ +pcu_e_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) siemens + +QS823_config \ +QS850_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc + +QS860T_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc + +AMX860_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel + +# special boards +################ + Adder87x_config \ AdderII_config \ AdderUSB_config \
@@ -769,6 +829,9 @@ Adder_config \ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder +cogent_mpc8xx_config: unconfig + @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent + ADS860_config \ FADS823_config \ FADS850SAR_config \
@@ -777,33 +840,6 @@ MPC885ADS_config \ FADS860T_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads -AMX860_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel - -c2mon_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx c2mon - -CCM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx CCM siemens - -cogent_mpc8xx_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx cogent - -ELPT860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX - -EP88x_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx ep88x - -ESTEEM192E_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx esteem192e - -ETX094_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx etx094 - -FLAGADM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx flagadm - GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include
@@ -811,21 +847,6 @@ GEN860T_config: unconfig echo "#define CONFIG_SC" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t -GENIETV_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx genietv - -GTH_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx gth - -hermes_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx hermes - -HMI10_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc - -IAD210_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx IAD210 siemens - ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include
@@ -833,9 +854,6 @@ ICU862_config: unconfig echo "#define CONFIG_100MHz" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862 -IP860_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx ip860 - IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig
@@ -860,31 +878,10 @@ IVMS8_config: unconfig echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm -kmsupx4_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile - -KUP4K_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx kup4k kup - -KUP4X_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx kup4x kup - -LANTEC_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx lantec - -lwmon_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx lwmon - MBX_config \ MBX860T_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx -mgsuvd_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile - -MHPC_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec - NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include
@@ -951,36 +948,6 @@ CP850_config: unconfig } @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 -NX823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx nx823 - -pcu_e_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx pcu_e siemens - -QS850_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc - -QS823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc - -QS860T_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc - -quantum_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx quantum - -R360MPI_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx r360mpi - -RBC823_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx rbc823 - -RPXClassic_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RPXClassic - -RPXlite_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RPXlite - RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ RPXlite_DW_64_LCD_config \
@@ -1000,40 +967,18 @@ RPXlite_DW_config: unconfig echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw -rmu_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx rmu - -RRvision_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx RRvision - RRvision_LCD_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision -SM850_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc - -spc1920_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx spc1920 - SPD823TS_config: unconfig @$(MKCONFIG) $@ powerpc mpc8xx spd8xx -stxxtc_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx - -svm_sc8xx_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx svm_sc8xx - SXNI855T_config: unconfig @$(MKCONFIG) $@ powerpc mpc8xx sixnet -# EMK MPC8xx based modules -TOP860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx top860 emk - # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support
@@ -1070,9 +1015,6 @@ TTTech_config: unconfig @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc -uc100_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx uc100 - v37_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h
@@ -1089,37 +1031,110 @@ wtk_config: unconfig ## PPC4xx Systems ######################################################################### -acadia_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx acadia amcc +# generic boards +################ + +csb272_config \ +csb472_config \ +ERIC_config \ +G2000_config \ +JSE_config \ +korat_config \ +lwmon5_config \ +ML2_config \ +pcs440ep_config \ +quad100hd_config\ +sbc405_config \ +sc3_config \ +zeus_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +acadia_config \ +bamboo_config \ +bubinga_config \ +ebony_config \ +katmai_config \ +luan_config \ +makalu_config \ +ocotea_config \ +redwood_config \ +taihu_config \ +taishan_config \ +yucca_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amcc -acadia_nand_config: unconfig - @mkdir -p $(obj)include $(obj)board/amcc/acadia - @mkdir -p $(obj)nand_spl/board/amcc/acadia - @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc +AP1000_config:unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amirix + +ADCIOP_config \ +APC405_config \ +AR405_config \ +ASH405_config \ +CANBT_config \ +CMS700_config \ +CPCI2DP_config \ +CPCIISER4_config\ +DASA_SIM_config \ +DP405_config \ +DU405_config \ +DU440_config \ +HH405_config \ +HUB405_config \ +PCI405_config \ +PLU405_config \ +PMC405_config \ +PMC405DE_config \ +PMC440_config \ +VOH405_config \ +VOM405_config \ +WUH405_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) esd -ADCIOP_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx adciop esd +CRAYL1_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx L1 cray -alpr_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx alpr prodrive +dlvision_config \ +gdppc440etx_config \ +neo_config : unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) gdsys -AP1000_config:unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ap1000 amirix +icon_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mosaixtech -APC405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx apc405 esd +MIP405_config \ +PIP405_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mpl -AR405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ar405 esd +hcu4_config \ +hcu5_config \ +mcu25_config: unconfig + @mkdir -p $(obj)board/netstal/common + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal -ASH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ash405 esd +alpr_config \ +p3p440_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) prodrive -bamboo_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx bamboo amcc +KAREF_config \ +METROBOX_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) sandburst + +XPEDITE1000_config: unconfig + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) xes + +# special boards +################ + +acadia_nand_config: unconfig + @mkdir -p $(obj)include $(obj)board/amcc/acadia + @mkdir -p $(obj)nand_spl/board/amcc/acadia + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc bamboo_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/bamboo
@@ -1129,12 +1144,6 @@ bamboo_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc -bubinga_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx bubinga amcc - -CANBT_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx canbt esd - # Arches, Canyonlands & Glacier use different U-Boot images arches_config \ canyonlands_config \
@@ -1167,12 +1176,6 @@ CATcenter_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave -CMS700_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cms700 esd - -CPCI2DP_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cpci2dp esd - CPCI405_config \ CPCI4052_config \ CPCI405DT_config \
@@ -1180,39 +1183,6 @@ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd -CPCIISER4_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx cpciiser4 esd - -CRAYL1_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx L1 cray - -csb272_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx csb272 - -csb472_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx csb472 - -DASA_SIM_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dasa_sim esd - -dlvision_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dlvision gdsys - -DP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx dp405 esd - -DU405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx du405 esd - -DU440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx du440 esd - -ebony_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ebony amcc - -ERIC_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx eric - fx12mm_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@@ -1231,29 +1201,6 @@ fx12mm_config: unconfig >> $(obj)board/avnet/fx12mm/config.tmp @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet -G2000_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx g2000 - -gdppc440etx_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx gdppc440etx gdsys - -hcu4_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx hcu4 netstal - -hcu5_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx hcu5 netstal - -HH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx hh405 esd - -HUB405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx hub405 esd - -icon_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx icon mosaixtech - # Compact-Center(codename intip) & DevCon-Center use different U-Boot images intip_config \ devconcenter_config: unconfig
@@ -1262,15 +1209,6 @@ devconcenter_config: unconfig tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys -JSE_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx jse - -KAREF_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx karef sandburst - -katmai_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx katmai amcc - # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig
@@ -1285,37 +1223,12 @@ haleakala_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc -korat_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx korat - -luan_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx luan amcc - -lwmon5_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx lwmon5 - -makalu_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx makalu amcc - -mcu25_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx mcu25 netstal - -METROBOX_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx metrobox sandburst - -MIP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx mip405 mpl - MIP405T_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIP405T" >$(obj)include/config.h @$(XECHO) "Enable subset config for MIP405T" @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl -ML2_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ml2 - ml507_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/xilinx/ml507
@@ -1334,40 +1247,10 @@ ml507_config: unconfig >> $(obj)board/xilinx/ml507/config.tmp @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx -neo_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx neo gdsys - -ocotea_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx ocotea amcc - OCRTC_config \ ORSG_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd -p3p440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx p3p440 prodrive - -PCI405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pci405 esd - -pcs440ep_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pcs440ep - -PIP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pip405 mpl - -PLU405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx plu405 esd - -PMC405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc405 esd - -PMC405DE_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc405de esd - -PMC440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx pmc440 esd - PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ PPChameleonEVB_ME_25_config \
@@ -1388,18 +1271,6 @@ PPChameleonEVB_HI_33_config: unconfig echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave -quad100hd_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx quad100hd - -redwood_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx redwood amcc - -sbc405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx sbc405 - -sc3_config:unconfig - @$(MKCONFIG) $@ powerpc ppc4xx sc3 - sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include
@@ -1429,12 +1300,6 @@ rainier_ramboot_config: unconfig $(obj)board/amcc/sequoia/config.tmp @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc -taihu_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx taihu amcc - -taishan_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx taishan amcc - v5fx30teval_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@@ -1453,12 +1318,6 @@ v5fx30teval_flash_config: unconfig >> $(obj)board/avnet/v5fx30teval/config.tmp @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet -VOH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx voh405 esd - -VOM405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx vom405 esd - W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $@ powerpc ppc4xx w7o
@@ -1468,9 +1327,6 @@ walnut_config \ sycamore_config: unconfig @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc -WUH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx wuh405 esd - xilinx-ppc405-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
@@ -1503,9 +1359,6 @@ xilinx-ppc440-generic_config: unconfig >> $(obj)board/xilinx/ppc440-generic/config.tmp @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx -XPEDITE1000_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx xpedite1000 xes - yosemite_config \ yellowstone_config: unconfig @mkdir -p $(obj)include
@@ -1513,35 +1366,50 @@ yellowstone_config: unconfig tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc -yucca_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx yucca amcc - -zeus_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx zeus - ######################################################################### ## MPC8220 Systems ######################################################################### +# generic boards +################ +sorcery_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8220 $(call lcname,$@) + Alaska8220_config \ Yukon8220_config: unconfig @$(MKCONFIG) $@ powerpc mpc8220 alaska -sorcery_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8220 sorcery - ######################################################################### ## MPC824x Systems ######################################################################### -A3000_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x a3000 - -barco_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x barco - -BMW_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x bmw +# generic boards +################ +A3000_config \ +barco_config \ +BMW_config \ +CU824_config \ +HIDDEN_DRAGON_config \ +MOUSSE_config \ +MUSENKI_config \ +MVBLUE_config \ +OXC_config \ +PN62_config \ +sbc8240_config \ +utx8245_config: unconfig + @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +debris_config \ +kvme080_config: unconfig + @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) etin + +# special boards +################ +eXalion_config: unconfig + @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion CPC45_config \ CPC45_ROMBOOT_config: unconfig
@@ -1554,21 +1422,6 @@ CPC45_ROMBOOT_config: unconfig echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45 -CU824_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x cu824 - -debris_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x debris etin - -eXalion_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x eXalion - -HIDDEN_DRAGON_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x hidden_dragon - -kvme080_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x kvme080 etin - # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as # time permits. #linkstation_HDLAN_config \
@@ -1581,42 +1434,53 @@ linkstation_HGLAN_config: unconfig esac @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation -MOUSSE_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x mousse - -MUSENKI_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x musenki - -MVBLUE_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x mvblue - -OXC_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x oxc - -PN62_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x pn62 - Sandpoint8240_config: unconfig @$(MKCONFIG) $@ powerpc mpc824x sandpoint Sandpoint8245_config: unconfig @$(MKCONFIG) $@ powerpc mpc824x sandpoint -sbc8240_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x sbc8240 - -utx8245_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x utx8245 - ######################################################################### ## MPC8260 Systems ######################################################################### -atc_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 atc +# generic boards +################ +atc_config \ +ep8260_config \ +ep82xxm_config \ +gw8260_config \ +hymod_config \ +IDS8247_config \ +IPHASE4539_config \ +ppmc8260_config \ +RPXsuper_config \ +rsdproto_config \ +sacsng_config \ +sbc8260_config \ +ZPC1900_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8266ADS_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) freescale + +mgcoge_config : unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) keymile + +SCM_config: unconfig + @$(MKCONFIG) $@ powerpc mpc8260 $(call ucname,$@) siemens + +TQM8272_config: unconfig + @$(MKCONFIG) TQM8272 powerpc mpc8260 $(call lcname,$@) tqc + +# special boards +################ cogent_mpc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 cogent + @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig
@@ -1644,24 +1508,6 @@ ep8248_config \ ep8248E_config : unconfig @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 -ep8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ep8260 - -ep82xxm_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ep82xxm - -gw8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 gw8260 - -hymod_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 hymod - -IDS8247_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ids8247 - -IPHASE4539_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 iphase4539 - ISPAN_config \ ISPAN_REVB_config: unconfig @mkdir -p $(obj)include
@@ -1670,9 +1516,6 @@ ISPAN_REVB_config: unconfig fi @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan -mgcoge_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8260 mgcoge keymile - MPC8260ADS_config \ MPC8260ADS_lowboot_config \ MPC8260ADS_33MHz_config \
@@ -1703,9 +1546,6 @@ PQ2FADS-ZU_66MHz_lowboot_config \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale -MPC8266ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 mpc8266ads freescale - muas3001_dev_config \ muas3001_config : unconfig @mkdir -p $(obj)include
@@ -1763,9 +1603,6 @@ PM828_ROMBOOT_PCI_config: unconfig fi @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 -ppmc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 ppmc8260 - Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include
@@ -1773,21 +1610,6 @@ Rattler_config: unconfig @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler -RPXsuper_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 rpxsuper - -rsdproto_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 rsdproto - -sacsng_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 sacsng - -sbc8260_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 sbc8260 - -SCM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 SCM siemens - TQM8255_AA_config \ TQM8260_AA_config \ TQM8260_AB_config \
@@ -1829,29 +1651,49 @@ TQM8265_AA_config: unconfig fi @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc -TQM8272_config: unconfig - @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc - VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk -ZPC1900_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 zpc1900 - ######################################################################### ## Coldfire ######################################################################### +# generic boards +################ + +idmr_config: unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +TASREG_config : unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) esd + +M5208EVBE_config \ +M5249EVB_config \ +M5253DEMO_config \ +M5253EVBE_config \ +M5271EVB_config \ +M5272C3_config \ +M5275EVB_config \ +M5282EVB_config \ +M53017EVB_config: unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) freescale + +EP2500_config : unconfig + @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) Mercury + +# special boards +################ + astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro -M5208EVBE_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5208evbe freescale - M52277EVB_config \ M52277EVB_spansion_config \ M52277EVB_stmicro_config : unconfig
@@ -1891,15 +1733,6 @@ M5235EVB_Flash32_config: unconfig fi @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale -M5249EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5249evb freescale - -M5253DEMO_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5253demo freescale - -M5253EVBE_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5253evbe freescale - cobra5272_config : unconfig @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
@@ -1915,27 +1748,6 @@ EB+MCF-EV123_internal_config : unconfig @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS -EP2500_config: unconfig - @$(MKCONFIG) $@ m68k mcf52x2 ep2500 Mercury - -idmr_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 idmr - -M5271EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5271evb freescale - -M5272C3_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5272c3 freescale - -M5275EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5275evb freescale - -M5282EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 m5282evb freescale - -M53017EVB_config : unconfig - @$(MKCONFIG) $@ m68k mcf532x m53017evb freescale - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \
@@ -2080,15 +1892,32 @@ M5485HFE_config : unconfig fi @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale -TASREG_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 tasreg esd - ######################################################################### ## MPC83xx Systems ######################################################################### +# generic boards +################ + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8323ERDB_config \ +MPC8349EMDS_config \ +MPC837XERDB_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) freescale + kmeter1_config: unconfig - @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) keymile + +MVBLM7_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) matrix_vision + +TQM834x_config: unconfig + @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) tqc + +# special boards +################ MPC8313ERDB_33_config \ MPC8313ERDB_66_config \
@@ -2115,9 +1944,6 @@ MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale -MPC8323ERDB_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc8323erdb freescale - MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \
@@ -2145,9 +1971,6 @@ MPC832XEMDS_ATM_config: unconfig fi ; @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale -MPC8349EMDS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc8349emds freescale - MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ MPC8349ITXGP_config: unconfig
@@ -2206,12 +2029,6 @@ MPC837XEMDS_HOST_config: unconfig fi ; @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale -MPC837XERDB_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mpc837xerdb freescale - -MVBLM7_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx mvblm7 matrix_vision - sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig
@@ -2230,30 +2047,41 @@ SIMPC8313_SP_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon -TQM834x_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx tqm834x tqc - caddy2_config \ vme8349_config: unconfig @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd -edb9301_config \ -edb9302_config \ -edb9302a_config \ -edb9307_config \ -edb9307a_config \ -edb9312_config \ -edb9315_config \ -edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx - ######################################################################### ## MPC85xx Systems ######################################################################### -ATUM8548_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx atum8548 +# generic boards +################ +ATUM8548_config \ +PM854_config \ +PM856_config \ +socrates_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + +MPC8540ADS_config \ +MPC8560ADS_config \ +MPC8544DS_config \ +MPC8568MDS_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) freescale + +stxgp3_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) stx + +XPEDITE5200_config \ +XPEDITE5370_config: unconfig + @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) xes + +# special boards +################ MPC8536DS_NAND_config \ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \
@@ -2261,9 +2089,6 @@ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale -MPC8540ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8540ads freescale - MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \
@@ -2278,9 +2103,6 @@ MPC8540EVAL_66_slave_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval -MPC8560ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8560ads freescale - MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig @mkdir -p $(obj)include
@@ -2289,9 +2111,6 @@ MPC8541CDS_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale -MPC8544DS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8544ds freescale - MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig @mkdir -p $(obj)include
@@ -2308,9 +2127,6 @@ MPC8555CDS_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale -MPC8568MDS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx mpc8568mds freescale - MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig
@@ -2342,12 +2158,6 @@ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale -PM854_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx pm854 - -PM856_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx pm856 - sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig
@@ -2365,12 +2175,6 @@ sbc8560_33_config \ sbc8560_66_config: unconfig @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560 -socrates_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx socrates - -stxgp3_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx stxgp3 stx - stxssa_config \ stxssa_4M_config: unconfig @mkdir -p $(obj)include
@@ -2396,18 +2200,27 @@ TQM8560_config: unconfig @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc -XPEDITE5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx xpedite5200 xes - -XPEDITE5370_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx xpedite5370 xes - ######################################################################### ## MPC86xx Systems ######################################################################### +# generic boards +################ + +sbc8641d_config: unconfig + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + MPC8610HPCD_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx mpc8610hpcd freescale + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) freescale + +XPEDITE5170_config: unconfig + @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) xes + +# special boards +################ MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig
@@ -2417,41 +2230,43 @@ MPC8641HPCN_config: unconfig fi @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale -sbc8641d_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx sbc8641d - -XPEDITE5170_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx xpedite5170 xes - ######################################################################### ## 74xx/7xx Systems ######################################################################### -AmigaOneG3SE_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx AmigaOneG3SE MAI +# generic boards +################ + +ppmc7xx_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) -BAB7xx_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx bab7xx eltec +# vendor specific boards (sorted by vendor) +########################################### + +BAB7xx_config \ +ELPPC_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) eltec CPCI750_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx cpci750 esd + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) esd + +mpc7448hpc2_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) freescale -DB64360_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx db64360 Marvell +AmigaOneG3SE_config: unconfig + @$(MKCONFIG) $@ powerpc 74xx_7xx $(@:_config=) MAI +DB64360_config \ DB64460_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx db64460 Marvell + @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) Marvell -ELPPC_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx elppc eltec +# special boards +################ EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 -mpc7448hpc2_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx mpc7448hpc2 freescale - P3G4_config: unconfig @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260
@@ -2469,9 +2284,6 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 -ppmc7xx_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx ppmc7xx - ZUMA_config: unconfig @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260
@@ -2482,40 +2294,89 @@ ZUMA_config: unconfig ## StrongARM Systems ######################################################################### -assabet_config : unconfig - @$(MKCONFIG) $@ arm sa1100 assabet - -dnp1110_config : unconfig - @$(MKCONFIG) $@ arm sa1100 dnp1110 - -gcplus_config : unconfig - @$(MKCONFIG) $@ arm sa1100 gcplus - -lart_config : unconfig - @$(MKCONFIG) $@ arm sa1100 lart - +# generic boards +################ +assabet_config \ +dnp1110_config \ +gcplus_config \ +lart_config \ shannon_config : unconfig - @$(MKCONFIG) $@ arm sa1100 shannon + @$(MKCONFIG) $@ arm sa1100 $(call lcname,$@) ######################################################################### ## ARM92xT Systems ######################################################################### +# generic boards +################ + +edb9301_config \ +edb9302_config \ +edb9302a_config \ +edb9307_config \ +edb9307a_config \ +edb9312_config \ +edb9315_config \ +edb9315a_config: unconfig + @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx + +mx1ads_config \ +mx1fs2_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx + +sbc2410x_config: unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL s3c24x0 + +scb9328_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx + +cm4008_config \ +cm41xx_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL ks8695 + +netstar_config \ +voiceblue_config: unconfig + @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) + +# vendor specific boards (sorted by vendor) +########################################### + a320evb_config : unconfig - @$(MKCONFIG) $@ arm arm920t a320evb faraday a320 + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) faraday a320 + +smdk2400_config \ +smdk2410_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) samsung s3c24x0 ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### -at91rm9200dk_config : unconfig - @$(MKCONFIG) $@ arm arm920t at91rm9200dk atmel at91rm9200 +# generic boards +################ +cmc_pu2_config \ +csb637_config \ +kb9202_config \ +m501sk_config \ +mp2usb_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL at91rm9200 + +# vendor specific boards (sorted by vendor) +########################################### + +at91rm9200dk_config \ at91rm9200ek_config : unconfig - @$(MKCONFIG) $@ arm arm920t at91rm9200ek atmel at91rm9200 + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) atmel at91rm9200 -cmc_pu2_config : unconfig - @$(MKCONFIG) $@ arm arm920t cmc_pu2 NULL at91rm9200 +eb_cpux9k2_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) BuS at91 + +omap1510inn_config : unconfig + @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) ti + +# special boards +################ CPUAT91_RAM_config \ CPUAT91_config : unconfig
@@ -2523,30 +2384,45 @@ CPUAT91_config : unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 -csb637_config : unconfig - @$(MKCONFIG) $@ arm arm920t csb637 NULL at91rm9200 - -eb_cpux9k2_config : unconfig - @$(MKCONFIG) $@ arm arm920t eb_cpux9k2 BuS at91 - -kb9202_config : unconfig - @$(MKCONFIG) $@ arm arm920t kb9202 NULL at91rm9200 - -m501sk_config : unconfig - @$(MKCONFIG) $@ arm arm920t m501sk NULL at91rm9200 - -mp2usb_config : unconfig - @$(MKCONFIG) $@ arm arm920t mp2usb NULL at91rm9200 - ######################################################################### ## ARM926EJ-S Systems ######################################################################### +# generic boards +################ + afeb9260_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs afeb9260 NULL at91 + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) NULL at91 + +# vendor specific boards (sorted by vendor) +########################################### at91cap9adk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs at91cap9adk atmel at91 + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) atmel at91 + +meesc_config \ +otc570_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) esd at91 + +guruplug_config \ +mv88f6281gtw_ge_config \ +openrd_base_config \ +rd6281a_config \ +sheevaplug_config: unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) Marvell kirkwood + +VCMA9_config : unconfig + @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) mpl s3c24x0 + +pm9261_config \ +pm9263_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ronetix at91 + +omap5912osk_config : unconfig + @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ti omap + +# special boards +################ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \
@@ -2647,12 +2523,6 @@ CPU9260_config : unconfig @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 -meesc_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs meesc esd at91 - -pm9261_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs pm9261 ronetix at91 - at91sam9m10g45ek_nandflash_config \ at91sam9m10g45ek_dataflash_config \ at91sam9m10g45ek_dataflash_cs0_config \
@@ -2674,12 +2544,6 @@ at91sam9g45ekes_config : unconfig fi; @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 -otc570_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs otc570 esd at91 - -pm9263_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs pm9263 ronetix at91 - SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig
@@ -2735,9 +2599,6 @@ davinci_dm6467evm_config : unconfig @$(MKCONFIG) -n $@ $@ arm arm926ejs \ $(subst davinci_,,$(@:_config=)) davinci davinci -guruplug_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - magnesium_config \ imx27lite_config: unconfig @$(MKCONFIG) $@ arm arm926ejs imx27lite logicpd mx27
@@ -2746,18 +2607,6 @@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $@ arm lh7a40x lpd7a40x -mv88f6281gtw_ge_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -mx1ads_config : unconfig - @$(MKCONFIG) $@ arm arm920t mx1ads NULL imx - -mx1fs2_config : unconfig - @$(MKCONFIG) $@ arm arm920t mx1fs2 NULL imx - -netstar_config: unconfig - @$(MKCONFIG) $@ arm arm925t netstar - nhk8815_config \ nhk8815_onenand_config: unconfig @mkdir -p $(obj)include
@@ -2767,9 +2616,6 @@ nhk8815_onenand_config: unconfig fi @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik -omap1510inn_config : unconfig - @$(MKCONFIG) $@ arm arm925t omap1510inn ti - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \
@@ -2790,12 +2636,6 @@ omap1610h2_cs_autoboot_config: unconfig fi; @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap -omap5912osk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs omap5912osk ti omap - -openrd_base_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig
@@ -2807,24 +2647,6 @@ omap730p2_cs3boot_config : unconfig fi; @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap -rd6281a_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -sbc2410x_config: unconfig - @$(MKCONFIG) $@ arm arm920t sbc2410x NULL s3c24x0 - -scb9328_config : unconfig - @$(MKCONFIG) $@ arm arm920t scb9328 NULL imx - -sheevaplug_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(@:_config=) Marvell kirkwood - -smdk2400_config : unconfig - @$(MKCONFIG) $@ arm arm920t smdk2400 samsung s3c24x0 - -smdk2410_config : unconfig - @$(MKCONFIG) $@ arm arm920t smdk2410 samsung s3c24x0 - spear300_config \ spear310_config \ spear320_config : unconfig
@@ -2873,135 +2695,113 @@ tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 -VCMA9_config : unconfig - @$(MKCONFIG) $@ arm arm920t vcma9 mpl s3c24x0 - ######################################################################### # ARM supplied Versatile development boards ######################################################################### -cm4008_config : unconfig - @$(MKCONFIG) $@ arm arm920t cm4008 NULL ks8695 - -cm41xx_config : unconfig - @$(MKCONFIG) $@ arm arm920t cm41xx NULL ks8695 - versatile_config \ versatileab_config \ versatilepb_config : unconfig @board/armltd/versatile/split_by_variant.sh $@ -voiceblue_config: unconfig - @$(MKCONFIG) $@ arm arm925t voiceblue - ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @$(MKCONFIG) $@ arm s3c44b0 B2 dave + @$(MKCONFIG) $@ arm s3c44b0 $(call ucname,$@) dave ######################################################################### ## ARM720T Systems ######################################################################### -armadillo_config: unconfig - @$(MKCONFIG) $@ arm arm720t armadillo - -ep7312_config : unconfig - @$(MKCONFIG) $@ arm arm720t ep7312 - -impa7_config : unconfig - @$(MKCONFIG) $@ arm arm720t impa7 +# generic boards +################ +armadillo_config \ +ep7312_config \ +impa7_config \ modnet50_config : unconfig - @$(MKCONFIG) $@ arm arm720t modnet50 + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) evb4510_config : unconfig - @$(MKCONFIG) $@ arm arm720t evb4510 NULL s3c4510b + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL s3c4510b lpc2292sodimm_config: unconfig - @$(MKCONFIG) $@ arm arm720t lpc2292sodimm NULL lpc2292 + @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL lpc2292 + +# vendor specific boards (sorted by vendor) +########################################### SMN42_config : unconfig - @$(MKCONFIG) $@ arm arm720t SMN42 siemens lpc2292 + @$(MKCONFIG) $@ arm arm720t $(call ucname,$@) siemens lpc2292 ######################################################################### ## ARM CORTEX Systems ######################################################################### +omapname = $(shell echo $(1) | sed -e 's/omap[0-9]_//' -e 's/\(.*\)_config/\L\1/') -devkit8000_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 devkit8000 timll omap3 - -omap3_beagle_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 beagle ti omap3 - -omap3_overo_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 overo NULL omap3 - -omap3_evm_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 evm ti omap3 +# generic boards +################ +omap3_overo_config \ omap3_pandora_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 pandora NULL omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) NULL omap3 -omap3_sdp3430_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 sdp3430 ti omap3 +# vendor specific boards (sorted by vendor) +########################################### -omap3_zoom1_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 zoom1 logicpd omap3 +mx51evk_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) freescale mx51 +omap3_zoom1_config \ omap3_zoom2_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 zoom2 logicpd omap3 + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) logicpd omap3 smdkc100_config: unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 smdkc100 samsung s5pc1xx + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) samsung s5pc1xx + +omap3_beagle_config \ +omap3_evm_config \ +omap3_sdp3430_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) ti omap3 + +devkit8000_config : unconfig + @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) timll omap3 ######################################################################### ## XScale Systems ######################################################################### -actux1_config : unconfig - @$(MKCONFIG) $@ arm ixp actux1 - -actux2_config : unconfig - @$(MKCONFIG) $@ arm ixp actux2 - -actux3_config : unconfig - @$(MKCONFIG) $@ arm ixp actux3 - -actux4_config : unconfig - @$(MKCONFIG) $@ arm ixp actux4 - -cerf250_config : unconfig - @$(MKCONFIG) $@ arm pxa cerf250 - -cradle_config : unconfig - @$(MKCONFIG) $@ arm pxa cradle - -csb226_config : unconfig - @$(MKCONFIG) $@ arm pxa csb226 - -delta_config : unconfig - @$(MKCONFIG) $@ arm pxa delta - -innokom_config : unconfig - @$(MKCONFIG) $@ arm pxa innokom - -ixdp425_config : unconfig - @$(MKCONFIG) $@ arm ixp ixdp425 +# generic boards +################ +actux1_config \ +actux2_config \ +actux3_config \ +actux4_config \ +ixdp425_config \ ixdpg425_config : unconfig - @$(MKCONFIG) $@ arm ixp ixdp425 - -lubbock_config : unconfig - @$(MKCONFIG) $@ arm pxa lubbock - -pleb2_config : unconfig - @$(MKCONFIG) $@ arm pxa pleb2 + @$(MKCONFIG) $@ arm ixp $(call lcname,$@) + +cerf250_config \ +cradle_config \ +csb226_config \ +delta_config \ +innokom_config \ +lubbock_config \ +pleb2_config \ +logodl_config \ +pxa255_idp_config \ +wepep250_config \ +xaeniax_config \ +xm250_config \ +xsengine_config \ +zylonite_config : + @$(MKCONFIG) $@ arm pxa $(call lcname,$@) -logodl_config : unconfig - @$(MKCONFIG) $@ arm pxa logodl +# special boards +################ pdnb3_config \ scpu_config: unconfig
@@ -3011,9 +2811,6 @@ scpu_config: unconfig fi @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive -pxa255_idp_config: unconfig - @$(MKCONFIG) $@ arm pxa pxa255_idp - polaris_config \ trizepsiv_config : unconfig @mkdir -p $(obj)include
@@ -3022,24 +2819,30 @@ trizepsiv_config : unconfig fi; @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv -wepep250_config : unconfig - @$(MKCONFIG) $@ arm pxa wepep250 +######################################################################### +## ARM1136 Systems +######################################################################### -xaeniax_config : unconfig - @$(MKCONFIG) $@ arm pxa xaeniax +# generic boards +################ -xm250_config : unconfig - @$(MKCONFIG) $@ arm pxa xm250 +# vendor specific boards (sorted by vendor) +########################################### -xsengine_config : unconfig - @$(MKCONFIG) $@ arm pxa xsengine +qong_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) davedenx mx31 -zylonite_config : - @$(MKCONFIG) $@ arm pxa zylonite +mx31ads_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) freescale mx31 -######################################################################### -## ARM1136 Systems -######################################################################### +imx31_litekit_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) logicpd mx31 + +omap2420h4_config : unconfig + @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) ti omap24xx + +# special boards +################ apollon_config : unconfig @mkdir -p $(obj)include
@@ -3047,9 +2850,6 @@ apollon_config : unconfig @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm1136 apollon NULL omap24xx -imx31_litekit_config : unconfig - @$(MKCONFIG) $@ arm arm1136 imx31_litekit logicpd mx31 - imx31_phycore_eet_config \ imx31_phycore_config : unconfig @mkdir -p $(obj)include
@@ -3058,9 +2858,6 @@ imx31_phycore_config : unconfig fi @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 -mx31ads_config : unconfig - @$(MKCONFIG) $@ arm arm1136 mx31ads freescale mx31 - mx31pdk_config \ mx31pdk_nand_config : unconfig @mkdir -p $(obj)include
@@ -3072,15 +2869,6 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 -mx51evk_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 mx51evk freescale mx51 - -omap2420h4_config : unconfig - @$(MKCONFIG) $@ arm arm1136 omap2420h4 ti omap24xx - -qong_config : unconfig - @$(MKCONFIG) $@ arm arm1136 qong davedenx mx31 - ######################################################################### ## ARM1176 Systems #########################################################################
@@ -3103,14 +2891,13 @@ smdk6400_config : unconfig ######################################################################### ## AMD SC520 CDP ######################################################################### -eNET_config : unconfig - @$(MKCONFIG) $@ i386 i386 eNET NULL sc520 - -sc520_cdp_config : unconfig - @$(MKCONFIG) $@ i386 i386 sc520_cdp NULL sc520 +# generic boards +################ +eNET_config \ +sc520_cdp_config \ sc520_spunk_config : unconfig - @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 + @$(MKCONFIG) $@ i386 i386 $(call lcname,$@) NULL sc520 sc520_spunk_rel_config : unconfig @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520
@@ -3122,6 +2909,15 @@ sc520_spunk_rel_config : unconfig ## MIPS32 4Kc ######################################################################### +# generic boards +################ + +tb0229_config: unconfig + @$(MKCONFIG) $@ mips mips $(call lcname,$@) + +# special boards +################ + incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \
@@ -3135,9 +2931,6 @@ incaip_config: unconfig echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a incaip mips mips incaip -tb0229_config: unconfig - @$(MKCONFIG) $@ mips mips tb0229 - vct_premium_config \ vct_premium_small_config \ vct_premium_onenand_config \
@@ -3264,20 +3057,17 @@ DK1S10_config: unconfig ## Nios-II ######################################################################### -EP1C20_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1c20 altera - -EP1S10_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1s10 altera +# vendor specific boards (sorted by vendor) +########################################### -EP1S40_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 ep1s40 altera +EP1C20_config \ +EP1S10_config \ +EP1S40_config : unconfig + @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) altera -PK1C20_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 pk1c20 psyent - -PCI5441_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 pci5441 psyent +PK1C20_config \ +PCI5441_config : unconfig + @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) psyent # nios2 generic boards NIOS2_GENERIC = nios2-generic
@@ -3426,33 +3216,21 @@ espt_config : unconfig #======================================================================== ######################################################################### -## LEON3 +## LEON2 ######################################################################### -# Gaisler GR-XC3S-1500 board -gr_xc3s_1500_config : unconfig - @$(MKCONFIG) $@ sparc leon3 gr_xc3s_1500 gaisler - -# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system -gr_cpci_ax2000_config : unconfig - @$(MKCONFIG) $@ sparc leon3 gr_cpci_ax2000 gaisler - -# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS -# Development board Stratix II edition, FPGA Device EP2S60. -gr_ep2s60_config: unconfig - @$(MKCONFIG) $@ sparc leon3 gr_ep2s60 gaisler - -# Gaisler LEON3 GRSIM simulator -grsim_config : unconfig - @$(MKCONFIG) $@ sparc leon3 grsim gaisler +grsim_leon2_config : unconfig + @$(MKCONFIG) $@ sparc leon2 $(call lcname,$@) gaisler ######################################################################### -## LEON2 +## LEON3 ######################################################################### -# Gaisler LEON2 GRSIM simulator -grsim_leon2_config : unconfig - @$(MKCONFIG) $@ sparc leon2 grsim_leon2 gaisler +gr_xc3s_1500_config \ +gr_cpci_ax2000_config \ +gr_ep2s60_config \ +grsim_config : unconfig + @$(MKCONFIG) $@ sparc leon3 $(call lcname,$@) gaisler ######################################################################### #########################################################################
Signature · 1 line
1.6.6.1
Wolfgang Denk
AppliedPATCH v2 3/4 Makefile: simplify handling of common board configurations
Quoted 10 lines · In message <[email protected]> you wrote:
Many boards don't need any special handling in the
Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup.Signed-off-by Wolfgang Denk <[email protected]>--- Makefile | 1436 ++++++++++++++++++++++++++------------------------------------ 1 files changed, 607 insertions(+), 829 deletions(-)
Applied to "next" branch.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Real programmers can write assembly code in any language. :-)
- Larry Wall in <[email protected]>PATCH v2 4/4 Makefile/mkconfig: read simple board configurations from boards.cfg
In reply to Wolfgang DenkInstead of adding explicit build rules for each and every board to the top level Makefile (which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg".
For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level Makefile are needed any more.
To make the table better readable, change the notation for unused fields from "NULL" into "-".
Signed-off-by Wolfgang Denk <[email protected]>
Cc Peter Tyser <[email protected]>
Cc Mike Frysinger <[email protected]>
---
Note:
I had to disable the simple and very convenient rule
%: %_config
$(MAKE)
in the top level Makefile, because it caused each invocation of "make" to fail with an error message:
make: *** No rule to make target `Makefile_config'. Stop.
Fixes welcome!
Makefile | 823 ++---------------------------------------------------------- boards.cfg | 356 ++++++++++++++++++++++++++ mkconfig | 72 ++++-- 3 files changed, 431 insertions(+), 820 deletions(-) create mode 100644 boards.cfg
Makefile +24 -799
@@ -475,8 +475,11 @@ unconfig: $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep -%: %_config - $(MAKE) +%_config:: unconfig + @$(MKCONFIG) -A $(@:_config=) + +##%: %_config +## $(MAKE) # # Functions to generate common board directory names
@@ -489,50 +492,9 @@ ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') #======================================================================== ######################################################################### -## MPC5xx Systems -######################################################################### - -cmi_mpc5xx_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xx cmi - -PATI_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xx pati mpl - -######################################################################### ## MPC5xxx Systems ######################################################################### -# generic boards -################ -BC3450_config \ -canmb_config \ -cm5200_config \ -hmi1001_config \ -jupiter_config \ -inka4x0_config \ -ipek01_config \ -motionpro_config\ -mucmc52_config \ -munices_config \ -o2dnt_config \ -uc101_config \ -v38b_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### -cpci5200_config \ -mecp5200_config \ -pf5200_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx $(call lcname,$@) esd - -aev_config \ -smmaco4_config \ -spieval_config: unconfig - @$(MKCONFIG) $@ powerpc mpc5xxx tqm5200 tqc - -# special boards -################ digsy_mtc_config \ digsy_mtc_LOWBOOT_config \ digsy_mtc_RAMBOOT_config: unconfig
@@ -717,21 +679,6 @@ TQM5200_STK100_config: unconfig ## MPC512x Systems ######################################################################### -# generic boards -################ -pdm360ng_config: unconfig - @$(MKCONFIG) $@ powerpc mpc512x $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### -aria_config: unconfig - @$(MKCONFIG) $@ powerpc mpc512x aria davedenx - -mecp5123_config: unconfig - @$(MKCONFIG) $@ powerpc mpc512x mecp5123 esd - -# special boards -################ mpc5121ads_config \ mpc5121ads_rev2_config \ : unconfig
@@ -745,80 +692,6 @@ mpc5121ads_rev2_config \ ## MPC8xx Systems ######################################################################### -# generic boards -################ - -c2mon_config \ -EP88x_config \ -ESTEEM192E_config \ -ETX094_config \ -FLAGADM_config \ -GENIETV_config \ -GTH_config \ -hermes_config \ -IP860_config \ -LANTEC_config \ -lwmon_config \ -NX823_config \ -quantum_config \ -R360MPI_config \ -RBC823_config \ -rmu_config \ -spc1920_config \ -svm_sc8xx_config \ -uc100_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) - -RPXClassic_config \ -RPXlite_config \ -RRvision_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) - -# vendor specific boards (sorted by vendor) -########################################### - -MHPC_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx mhpc eltec - -TOP860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx top860 emk - -kmsupx4_config \ -mgsuvd_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx km8xx keymile - -KUP4K_config \ -KUP4X_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx $(call lcname,$@) kup - -ELPT860_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx elpt860 LEOX - -stxxtc_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8xx stxxtc stx - -HMI10_config \ -SM850_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx tqm8xx tqc - -CCM_config \ -IAD210_config \ -pcu_e_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx $(@:_config=) siemens - -QS823_config \ -QS850_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs850 snmc - -QS860T_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx qs860t snmc - -AMX860_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8xx amx860 westel - -# special boards -################ - Adder87x_config \ AdderII_config \ AdderUSB_config \
@@ -829,9 +702,6 @@ Adder_config \ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder -cogent_mpc8xx_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent - ADS860_config \ FADS823_config \ FADS850SAR_config \
@@ -1031,103 +901,6 @@ wtk_config: unconfig ## PPC4xx Systems ######################################################################### -# generic boards -################ - -csb272_config \ -csb472_config \ -ERIC_config \ -G2000_config \ -JSE_config \ -korat_config \ -lwmon5_config \ -ML2_config \ -pcs440ep_config \ -quad100hd_config\ -sbc405_config \ -sc3_config \ -zeus_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -acadia_config \ -bamboo_config \ -bubinga_config \ -ebony_config \ -katmai_config \ -luan_config \ -makalu_config \ -ocotea_config \ -redwood_config \ -taihu_config \ -taishan_config \ -yucca_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amcc - -AP1000_config:unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) amirix - -ADCIOP_config \ -APC405_config \ -AR405_config \ -ASH405_config \ -CANBT_config \ -CMS700_config \ -CPCI2DP_config \ -CPCIISER4_config\ -DASA_SIM_config \ -DP405_config \ -DU405_config \ -DU440_config \ -HH405_config \ -HUB405_config \ -PCI405_config \ -PLU405_config \ -PMC405_config \ -PMC405DE_config \ -PMC440_config \ -VOH405_config \ -VOM405_config \ -WUH405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) esd - -CRAYL1_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx L1 cray - -dlvision_config \ -gdppc440etx_config \ -neo_config : unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) gdsys - -icon_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mosaixtech - -MIP405_config \ -PIP405_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) mpl - -hcu4_config \ -hcu5_config \ -mcu25_config: unconfig - @mkdir -p $(obj)board/netstal/common - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal - -alpr_config \ -p3p440_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) prodrive - -KAREF_config \ -METROBOX_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) sandburst - -XPEDITE1000_config: unconfig - @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) xes - -# special boards -################ - acadia_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/acadia @mkdir -p $(obj)nand_spl/board/amcc/acadia
@@ -1209,6 +982,12 @@ devconcenter_config: unconfig tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys +hcu4_config \ +hcu5_config \ +mcu25_config: unconfig + @mkdir -p $(obj)board/netstal/common + @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal + # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig
@@ -1367,47 +1146,9 @@ yellowstone_config: unconfig @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc ######################################################################### -## MPC8220 Systems -######################################################################### - -# generic boards -################ -sorcery_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8220 $(call lcname,$@) - -Alaska8220_config \ -Yukon8220_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8220 alaska - -######################################################################### ## MPC824x Systems ######################################################################### -# generic boards -################ -A3000_config \ -barco_config \ -BMW_config \ -CU824_config \ -HIDDEN_DRAGON_config \ -MOUSSE_config \ -MUSENKI_config \ -MVBLUE_config \ -OXC_config \ -PN62_config \ -sbc8240_config \ -utx8245_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -debris_config \ -kvme080_config: unconfig - @$(MKCONFIG) $@ powerpc mpc824x $(call lcname,$@) etin - -# special boards -################ eXalion_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
@@ -1444,41 +1185,6 @@ Sandpoint8245_config: unconfig ## MPC8260 Systems ######################################################################### -# generic boards -################ -atc_config \ -ep8260_config \ -ep82xxm_config \ -gw8260_config \ -hymod_config \ -IDS8247_config \ -IPHASE4539_config \ -ppmc8260_config \ -RPXsuper_config \ -rsdproto_config \ -sacsng_config \ -sbc8260_config \ -ZPC1900_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -MPC8266ADS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) freescale - -mgcoge_config : unconfig - @$(MKCONFIG) $@ powerpc mpc8260 $(call lcname,$@) keymile - -SCM_config: unconfig - @$(MKCONFIG) $@ powerpc mpc8260 $(call ucname,$@) siemens - -TQM8272_config: unconfig - @$(MKCONFIG) TQM8272 powerpc mpc8260 $(call lcname,$@) tqc - -# special boards -################ - cogent_mpc8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
@@ -1661,35 +1367,6 @@ VoVPN-GW_100MHz_config: unconfig ## Coldfire ######################################################################### -# generic boards -################ - -idmr_config: unconfig - @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -TASREG_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) esd - -M5208EVBE_config \ -M5249EVB_config \ -M5253DEMO_config \ -M5253EVBE_config \ -M5271EVB_config \ -M5272C3_config \ -M5275EVB_config \ -M5282EVB_config \ -M53017EVB_config: unconfig - @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) freescale - -EP2500_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 $(call lcname,$@) Mercury - -# special boards -################ - astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
@@ -1896,29 +1573,6 @@ M5485HFE_config : unconfig ## MPC83xx Systems ######################################################################### -# generic boards -################ - -# vendor specific boards (sorted by vendor) -########################################### - -MPC8323ERDB_config \ -MPC8349EMDS_config \ -MPC837XERDB_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) freescale - -kmeter1_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) keymile - -MVBLM7_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) matrix_vision - -TQM834x_config: unconfig - @$(MKCONFIG) $@ powerpc mpc83xx $(call lcname,$@) tqc - -# special boards -################ - MPC8313ERDB_33_config \ MPC8313ERDB_66_config \ MPC8313ERDB_NAND_33_config \
@@ -2055,33 +1709,6 @@ vme8349_config: unconfig ## MPC85xx Systems ######################################################################### -# generic boards -################ - -ATUM8548_config \ -PM854_config \ -PM856_config \ -socrates_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -MPC8540ADS_config \ -MPC8560ADS_config \ -MPC8544DS_config \ -MPC8568MDS_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) freescale - -stxgp3_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) stx - -XPEDITE5200_config \ -XPEDITE5370_config: unconfig - @$(MKCONFIG) $@ powerpc mpc85xx $(call lcname,$@) xes - -# special boards -################ MPC8536DS_NAND_config \ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \
@@ -2204,24 +1831,6 @@ TQM8560_config: unconfig ## MPC86xx Systems ######################################################################### -# generic boards -################ - -sbc8641d_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -MPC8610HPCD_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) freescale - -XPEDITE5170_config: unconfig - @$(MKCONFIG) $@ powerpc mpc86xx $(call lcname,$@) xes - -# special boards -################ - MPC8641HPCN_36BIT_config \ MPC8641HPCN_config: unconfig @mkdir -p $(obj)include
@@ -2234,42 +1843,10 @@ MPC8641HPCN_config: unconfig ## 74xx/7xx Systems ######################################################################### -# generic boards -################ - -ppmc7xx_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -BAB7xx_config \ -ELPPC_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) eltec - -CPCI750_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) esd - -mpc7448hpc2_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) freescale - -AmigaOneG3SE_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(@:_config=) MAI - -DB64360_config \ -DB64460_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx $(call lcname,$@) Marvell - -# special boards -################ - EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 -P3G4_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 - p3m750_config \ p3m7448_config: unconfig @mkdir -p $(obj)include
@@ -2284,100 +1861,14 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 -ZUMA_config: unconfig - @$(MKCONFIG) $@ powerpc 74xx_7xx evb64260 - #======================================================================== # ARM #======================================================================== -######################################################################### -## StrongARM Systems -######################################################################### - -# generic boards -################ -assabet_config \ -dnp1110_config \ -gcplus_config \ -lart_config \ -shannon_config : unconfig - @$(MKCONFIG) $@ arm sa1100 $(call lcname,$@) - -######################################################################### -## ARM92xT Systems -######################################################################### - -# generic boards -################ - -edb9301_config \ -edb9302_config \ -edb9302a_config \ -edb9307_config \ -edb9307a_config \ -edb9312_config \ -edb9315_config \ -edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $@ edb93xx arm arm920t edb93xx NULL ep93xx - -mx1ads_config \ -mx1fs2_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx - -sbc2410x_config: unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL s3c24x0 - -scb9328_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL imx - -cm4008_config \ -cm41xx_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL ks8695 - -netstar_config \ -voiceblue_config: unconfig - @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) - -# vendor specific boards (sorted by vendor) -########################################### - -a320evb_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) faraday a320 - -smdk2400_config \ -smdk2410_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) samsung s3c24x0 ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### -# generic boards -################ - -cmc_pu2_config \ -csb637_config \ -kb9202_config \ -m501sk_config \ -mp2usb_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) NULL at91rm9200 - -# vendor specific boards (sorted by vendor) -########################################### - -at91rm9200dk_config \ -at91rm9200ek_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) atmel at91rm9200 - -eb_cpux9k2_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) BuS at91 - -omap1510inn_config : unconfig - @$(MKCONFIG) $@ arm arm925t $(call lcname,$@) ti - -# special boards -################ - CPUAT91_RAM_config \ CPUAT91_config : unconfig @mkdir -p $(obj)include
@@ -2388,42 +1879,6 @@ CPUAT91_config : unconfig ## ARM926EJ-S Systems ######################################################################### -# generic boards -################ - -afeb9260_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) NULL at91 - -# vendor specific boards (sorted by vendor) -########################################### - -at91cap9adk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) atmel at91 - -meesc_config \ -otc570_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) esd at91 - -guruplug_config \ -mv88f6281gtw_ge_config \ -openrd_base_config \ -rd6281a_config \ -sheevaplug_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) Marvell kirkwood - -VCMA9_config : unconfig - @$(MKCONFIG) $@ arm arm920t $(call lcname,$@) mpl s3c24x0 - -pm9261_config \ -pm9263_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ronetix at91 - -omap5912osk_config : unconfig - @$(MKCONFIG) $@ arm arm926ejs $(call lcname,$@) ti omap - -# special boards -################ - at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \
@@ -2599,14 +2054,6 @@ davinci_dm6467evm_config : unconfig @$(MKCONFIG) -n $@ $@ arm arm926ejs \ $(subst davinci_,,$(@:_config=)) davinci davinci -magnesium_config \ -imx27lite_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs imx27lite logicpd mx27 - -lpd7a400_config \ -lpd7a404_config: unconfig - @$(MKCONFIG) $@ arm lh7a40x lpd7a40x - nhk8815_config \ nhk8815_onenand_config: unconfig @mkdir -p $(obj)include
@@ -2655,9 +2102,6 @@ spear320_config : unconfig spear600_config : unconfig @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear -suen3_config: unconfig - @$(MKCONFIG) $@ arm arm926ejs km_arm keymile kirkwood - SX1_stdout_serial_config \ SX1_config: unconfig @mkdir -p $(obj)include
@@ -2689,12 +2133,22 @@ trab_old_config: unconfig echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -n $@ -a trab arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0 tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 +edb9301_config \ +edb9302_config \ +edb9302a_config \ +edb9307_config \ +edb9307a_config \ +edb9312_config \ +edb9315_config \ +edb9315a_config: unconfig + @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx + ######################################################################### # ARM supplied Versatile development boards #########################################################################
@@ -2705,104 +2159,9 @@ versatilepb_config : unconfig @board/armltd/versatile/split_by_variant.sh $@ ######################################################################### -## S3C44B0 Systems -######################################################################### - -B2_config : unconfig - @$(MKCONFIG) $@ arm s3c44b0 $(call ucname,$@) dave - -######################################################################### -## ARM720T Systems -######################################################################### - -# generic boards -################ - -armadillo_config \ -ep7312_config \ -impa7_config \ -modnet50_config : unconfig - @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) - -evb4510_config : unconfig - @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL s3c4510b - -lpc2292sodimm_config: unconfig - @$(MKCONFIG) $@ arm arm720t $(call lcname,$@) NULL lpc2292 - -# vendor specific boards (sorted by vendor) -########################################### - -SMN42_config : unconfig - @$(MKCONFIG) $@ arm arm720t $(call ucname,$@) siemens lpc2292 - -######################################################################### -## ARM CORTEX Systems -######################################################################### -omapname = $(shell echo $(1) | sed -e 's/omap[0-9]_//' -e 's/\(.*\)_config/\L\1/') - -# generic boards -################ - -omap3_overo_config \ -omap3_pandora_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) NULL omap3 - -# vendor specific boards (sorted by vendor) -########################################### - -mx51evk_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) freescale mx51 - -omap3_zoom1_config \ -omap3_zoom2_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) logicpd omap3 - -smdkc100_config: unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) samsung s5pc1xx - -omap3_beagle_config \ -omap3_evm_config \ -omap3_sdp3430_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call omapname,$@) ti omap3 - -devkit8000_config : unconfig - @$(MKCONFIG) $@ arm arm_cortexa8 $(call lcname,$@) timll omap3 - -######################################################################### ## XScale Systems ######################################################################### -# generic boards -################ - -actux1_config \ -actux2_config \ -actux3_config \ -actux4_config \ -ixdp425_config \ -ixdpg425_config : unconfig - @$(MKCONFIG) $@ arm ixp $(call lcname,$@) - -cerf250_config \ -cradle_config \ -csb226_config \ -delta_config \ -innokom_config \ -lubbock_config \ -pleb2_config \ -logodl_config \ -pxa255_idp_config \ -wepep250_config \ -xaeniax_config \ -xm250_config \ -xsengine_config \ -zylonite_config : - @$(MKCONFIG) $@ arm pxa $(call lcname,$@) - -# special boards -################ - pdnb3_config \ scpu_config: unconfig @mkdir -p $(obj)include
@@ -2823,32 +2182,11 @@ trizepsiv_config : unconfig ## ARM1136 Systems ######################################################################### -# generic boards -################ - -# vendor specific boards (sorted by vendor) -########################################### - -qong_config : unconfig - @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) davedenx mx31 - -mx31ads_config : unconfig - @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) freescale mx31 - -imx31_litekit_config : unconfig - @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) logicpd mx31 - -omap2420h4_config : unconfig - @$(MKCONFIG) $@ arm arm1136 $(call lcname,$@) ti omap24xx - -# special boards -################ - apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk - @$(MKCONFIG) $@ arm arm1136 apollon NULL omap24xx + @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx imx31_phycore_eet_config \ imx31_phycore_config : unconfig
@@ -2856,7 +2194,7 @@ imx31_phycore_config : unconfig @if [ -n "$(findstring _eet_,$@)" ]; then \ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31 mx31pdk_config \ mx31pdk_nand_config : unconfig
@@ -2886,38 +2224,12 @@ smdk6400_config : unconfig @$(MKCONFIG) $(subst _noUSB,,$(@:_config=)) arm arm1176 smdk6400 samsung s3c64xx #======================================================================== -# i386 -#======================================================================== -######################################################################### -## AMD SC520 CDP -######################################################################### - -# generic boards -################ -eNET_config \ -sc520_cdp_config \ -sc520_spunk_config : unconfig - @$(MKCONFIG) $@ i386 i386 $(call lcname,$@) NULL sc520 - -sc520_spunk_rel_config : unconfig - @$(MKCONFIG) $@ i386 i386 sc520_spunk NULL sc520 - -#======================================================================== # MIPS #======================================================================== ######################################################################### ## MIPS32 4Kc ######################################################################### -# generic boards -################ - -tb0229_config: unconfig - @$(MKCONFIG) $@ mips mips $(call lcname,$@) - -# special boards -################ - incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \
@@ -3000,13 +2312,6 @@ qemu_mips_config : unconfig @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h @$(MKCONFIG) -a qemu-mips mips mips qemu-mips -######################################################################### -## MIPS64 5Kc -######################################################################### - -purple_config : unconfig - @$(MKCONFIG) $@ mips mips purple - #======================================================================== # Nios #========================================================================
@@ -3057,18 +2362,6 @@ DK1S10_config: unconfig ## Nios-II ######################################################################### -# vendor specific boards (sorted by vendor) -########################################### - -EP1C20_config \ -EP1S10_config \ -EP1S40_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) altera - -PK1C20_config \ -PCI5441_config : unconfig - @$(MKCONFIG) $@ nios2 nios2 $(call lcname,$@) psyent - # nios2 generic boards NIOS2_GENERIC = nios2-generic
@@ -3076,60 +2369,14 @@ $(NIOS2_GENERIC:%=%_config) : unconfig @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera #======================================================================== -## Microblaze -#======================================================================== - -microblaze-generic_config: unconfig - @$(MKCONFIG) $@ microblaze microblaze microblaze-generic xilinx - -#======================================================================== # Blackfin #======================================================================== -# Analog Devices boards -BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ - bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit - -# Bluetechnix tinyboards -BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \ - tcm-bf518 tcm-bf537 - -# Misc third party boards -BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04 - -# I-SYST Micromodule -BFIN_BOARDS += ibf-dsp561 - -$(BFIN_BOARDS:%=%_config) : unconfig - @$(MKCONFIG) $@ blackfin blackfin $(@:_config=) - bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ bf527-ezkit blackfin blackfin bf527-ezkit #======================================================================== -# AVR32 -#======================================================================== - -atngw100_config : unconfig - @$(MKCONFIG) $@ avr32 at32ap atngw100 atmel at32ap700x - -atstk1002_config \ -atstk1003_config \ -atstk1004_config \ -atstk1006_config : unconfig - @$(MKCONFIG) $@ avr32 at32ap atstk1000 atmel at32ap700x - -favr-32-ezkit_config : unconfig - @$(MKCONFIG) $@ avr32 at32ap favr-32-ezkit earthlcd at32ap700x - -hammerhead_config : unconfig - @$(MKCONFIG) $@ avr32 at32ap hammerhead miromico at32ap700x - -mimc200_config : unconfig - @$(MKCONFIG) $@ avr32 at32ap mimc200 mimc at32ap700x - -#======================================================================== # SH3 (SuperH) #========================================================================
@@ -3211,28 +2458,6 @@ espt_config : unconfig @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h @$(MKCONFIG) -a $@ sh sh4 espt -#======================================================================== -# SPARC -#======================================================================== - -######################################################################### -## LEON2 -######################################################################### - -grsim_leon2_config : unconfig - @$(MKCONFIG) $@ sparc leon2 $(call lcname,$@) gaisler - -######################################################################### -## LEON3 -######################################################################### - -gr_xc3s_1500_config \ -gr_cpci_ax2000_config \ -gr_ep2s60_config \ -grsim_config : unconfig - @$(MKCONFIG) $@ sparc leon3 $(call lcname,$@) gaisler - -######################################################################### ######################################################################### #########################################################################
boards.cfg new file +356 -0
356 lines not on this page · raw message
mkconfig +51 -21
122 lines not on this page · raw message
Signature · 1 line
1.6.6.1
PATCH v2 4/4 Makefile/mkconfig: read simple board configurations from boards.cfg
Hi Wolfgang,
<snip>
Quoted 10 lines
Note:
I had to disable the simple and very convenient rule
%: %_config
$(MAKE)
in the top levelMakefile, because it caused each invocation of "make" to fail with an error message:make: *** No rule to make target `Makefile_config'. Stop.
Fixes welcome!
I think adding the following line somewhere in the Makefile should allow the %:%_config rule to be re-enabled:
Makefile:;
Without the above line, after uncommenting the %: %_config rule and running "make -d <board>" the output shows that make is looking to satisfy an implicit 'Makefile' rule which is eventually satisfied by the %: %_config target, which causes the error you mention:
Reading makefile `Makefile'...
Updating makefiles....
Considering target file `Makefile'.
Looking for an implicit rule for `Makefile'.
Trying pattern rule with stem `Makefile'.
...
Trying implicit prerequisite `Makefile_config'.
Looking for a rule with intermediate file `Makefile_config'.
Avoiding implicit rule recursion.
Trying pattern rule with stem `Makefile'.
Trying rule prerequisite `unconfig'.
Found an implicit rule for `Makefile'.
Considering target file `unconfig'.
File `unconfig' does not exist.
Finished prerequisites of target file `unconfig'.
Must remake target `unconfig'.
Putting child 0x080a6f40 (unconfig) PID 20171 on the chain. Live child 0x080a6f40 (unconfig) PID 20171
Reaping winning child 0x080a6f40 PID 20171
Removing child 0x080a6f40 PID 20171 from chain.
Successfully remade target file `unconfig'.
Considering target file `Makefile_config'.
File `Makefile_config' does not exist.
Pruning file `unconfig'.
Finished prerequisites of target file `Makefile_config'.
Must remake target `Makefile_config'.
If the unconfig dependency of the %_config rule is removed, Makefile_config no longer needs to be built, and building works expected. Weird... So I'm not sure why the unconfig dependency makes a difference. Anyone have any clue?
As a basic test, the following works as expected (eg try running 'make asdf'):
unconfig:
@echo "UNCONFIG for $@"baz_config:
@echo applying target baz rules for $@.
%_config:
@echo applying DEFAULT rules for $@.
%: %_config
@echo DEFAULT_config for $@
while the following exhibits the issue Wolfgang pointed out:
unconfig:
@echo "UNCONFIG for $@"baz_config:
@echo applying target baz rules for $@.
%_config: unconfig
@echo applying DEFAULT rules for $@.
%: %_config
@echo DEFAULT_config for $@
The fix mentioned at the top would look like:Makefile:;
unconfig:
@echo "unconfig for $@"baz_config:
@echo applying target baz rules for $@.
%_config: unconfig
@echo applying default rules for $@.
%: %_config
@echo default_config for $@
For what its worth the Linux kernel also has the empty Makefile rule. Out of curiosity, anyone know why the unconfig dependency of %_config makes any difference? I don't quite get why it does, but I don't think adding the empty Makefile rule has any real downsides, and may actually be an improvement so make doesn't waste its time looking for Makefile.xyz targets we don't care about.
Best,
Peter
PATCH v2 4/4 Makefile/mkconfig: read simple board configurations from boards.cfg
Quoted 11 lines · Peter Tyser
Hi Wolfgang,
<snip>
Quoted 7 lines
Note:
I had to disable the simple and very convenient rule
%: %_config
$(MAKE)
in the top levelMakefile, because it caused each invocation of "make" to fail with an error message:
Quoted 8 lines
Quoted 3 lines
make: *** No rule to make target `Makefile_config'. Stop.
Fixes welcome!
I think adding the following line somewhere in the
Makefileshould allow the %:%_config rule to be re-enabled:
Makefile:;
Maybe I spoke too soon... It seems that make looks for other files that are dependencies, but don't have explicit rules. Like include/autoconf.mk, config.mk, etc. Linux has a number of implicit rule overrides (search for implicit in its top-level Makefile) that appear to be for the same type of issue. This seems like a somewhat hokey fix to have a number of empty rules defined though. Any better ideas or comments on why this issue didn't exist before?
Best,
Peter
Wolfgang Denk
AppliedPATCH v2 4/4 Makefile/mkconfig: read simple board configurations from boards.cfg
In reply to Wolfgang DenkQuoted 23 lines · In message <[email protected]> you wrote:
Instead of adding explicit build rules for each and every board to the top level
Makefile(which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg".For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level
Makefileare needed any more.To make the table better readable, change the notation for unused fields from "NULL" into "-".
Signed-off-by Wolfgang Denk <[email protected]>Cc Peter Tyser <[email protected]>Cc Mike Frysinger <[email protected]>---
Note:
I had to disable the simple and very convenient rule
%: %_config
$(MAKE)
in the top levelMakefile, because it caused each invocation of "make" to fail with an error message:
Quoted 3 lines
make: *** No rule to make target `Makefile_config'. Stop.
Fixes welcome!
We're still looking for a clean solution for this problem...
Quoted 6 lines
Makefile | 823 ++---------------------------------------------------------- boards.cfg | 356 ++++++++++++++++++++++++++ mkconfig | 72 ++++-- 3 files changed, 431 insertions(+), 820 deletions(-) create mode 100644 boards.cfg
Applied to "next" branch.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Faith may be defined briefly as an illogical belief in the occurence of the improbable. - H. L. Mencken