Name the default PCI bus "pci.0" on all architectures
PATCH 1/1 Name the default PCI bus "pci.0" on all architectures
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
--- hw/grackle_pci.c | 2 +- hw/gt64xxx.c | 2 +- hw/ppc4xx_pci.c | 2 +- hw/ppce500_pci.c | 2 +- hw/prep_pci.c | 2 +- hw/sh_pci.c | 2 +- hw/unin_pci.c | 4 ++-- hw/versatile_pci.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
hw/grackle_pci.c +1 -1
@@ -88,7 +88,7 @@ PCIBus *pci_grackle_init(uint32_t base, qemu_irq *pic)qdev_init_nofail (dev); s =sysbus_from_qdev (dev); d =FROM_SYSBUS (GrackleState, s); - d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci" , + d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci.0" , pci_grackle_set_irq, pci_grackle_map_irq, pic,0 ,4 );
hw/gt64xxx.c +1 -1
@@ -1113,7 +1113,7 @@ PCIBus *pci_gt64120_init(qemu_irq *pic) s =qemu_mallocz (sizeof (GT64120State)); s->pci =qemu_mallocz (sizeof (GT64120PCIState)); - s->pci->bus =pci_register_bus (NULL ,"pci" , + s->pci->bus =pci_register_bus (NULL ,"pci.0" , pci_gt64120_set_irq, pci_gt64120_map_irq, pic,144 ,4 ); s->ISD_handle =cpu_register_io_memory (gt64120_read, gt64120_write, s);
hw/ppc4xx_pci.c +1 -1
@@ -357,7 +357,7 @@ PCIBus *ppc4xx_pci_init(CPUState *env, qemu_irq pci_irqs[4], controller =qemu_mallocz (sizeof (PPC4xxPCIState)); - controller->pci_state.bus =pci_register_bus (NULL ,"pci" , + controller->pci_state.bus =pci_register_bus (NULL ,"pci.0" , ppc4xx_pci_set_irq, ppc4xx_pci_map_irq, pci_irqs,0 ,4 );
hw/ppce500_pci.c +1 -1
@@ -276,7 +276,7 @@ PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers) controller =qemu_mallocz (sizeof (PPCE500PCIState)); - controller->pci_state.bus =pci_register_bus (NULL ,"pci" , + controller->pci_state.bus =pci_register_bus (NULL ,"pci.0" , mpc85xx_pci_set_irq, mpc85xx_pci_map_irq, pci_irqs,0x88 ,4 );
hw/prep_pci.c +1 -1
@@ -117,7 +117,7 @@ PCIBus *pci_prep_init(qemu_irq *pic)int PPC_io_memory; s =qemu_mallocz (sizeof (PREPPCIState)); - s->bus =pci_register_bus (NULL ,"pci" , + s->bus =pci_register_bus (NULL ,"pci.0" , prep_set_irq, prep_map_irq, pic,0 ,4 );pci_host_conf_register_ioport (0xcf8 , s);
hw/sh_pci.c +1 -1
@@ -98,7 +98,7 @@ PCIBus *sh_pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,int reg; p =qemu_mallocz (sizeof (SHPCIC )); - p->bus =pci_register_bus (NULL ,"pci" , + p->bus =pci_register_bus (NULL ,"pci.0" , set_irq, map_irq, opaque, devfn_min, nirq); p->dev = pci_register_device(p->bus, "SH PCIC", sizeof(PCIDevice),
hw/unin_pci.c +2 -2
@@ -226,7 +226,7 @@ PCIBus *pci_pmac_init(qemu_irq *pic)qdev_init_nofail (dev); s =sysbus_from_qdev (dev); d =FROM_SYSBUS (UNINState, s); - d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci" , + d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci.0" , pci_unin_set_irq, pci_unin_map_irq, pic,11 <<3 ,4 );
@@ -278,7 +278,7 @@ PCIBus *pci_pmac_u3_init(qemu_irq *pic) s =sysbus_from_qdev (dev); d =FROM_SYSBUS (UNINState, s); - d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci" , + d->host_state.bus =pci_register_bus (&d->busdev.qdev,"pci.0" , pci_unin_set_irq, pci_unin_map_irq, pic,11 <<3 ,4 );
hw/versatile_pci.c +1 -1
@@ -125,7 +125,7 @@ static int pci_vpb_init(SysBusDevice *dev)for (i =0 ; i <4 ; i++) {sysbus_init_irq (dev, &s->irq[i]); } - bus =pci_register_bus (&dev->qdev,"pci" , + bus =pci_register_bus (&dev->qdev,"pci.0" , pci_vpb_set_irq, pci_vpb_map_irq, s->irq,11 <<3 ,4 );
Signature · 1 line
1.6.6.1
Quoted 9 lines · Daniel P. Berrange
The system emulators for each arch are using inconsistent
naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'Signed-off-by Daniel P. Berrange <[email protected]>---
Quoted 8 lines
hw/grackle_pci.c | 2 +- hw/gt64xxx.c | 2 +- hw/ppc4xx_pci.c | 2 +- hw/ppce500_pci.c | 2 +- hw/prep_pci.c | 2 +- hw/sh_pci.c | 2 +- hw/unin_pci.c | 4 ++-- hw/versatile_pci.c | 2 +-
Missing hw/apb_pci.c.
Quoted 121 lines
8 files changed, 9 insertions(+), 9 deletions(-)diff --git
a/hw/grackle_pci.cb/hw/grackle_pci.c
index aa0c51b..8444a35 100644
---a/hw/grackle_pci.c
+++b/hw/grackle_pci.c
@@ -88,7 +88,7 @@ PCIBus *pci_grackle_init(uint32_t base,qemu_irq*pic)qdev_init_nofail(dev); s = sysbus_from_qdev(dev); d = FROM_SYSBUS(GrackleState, s); - d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci", + d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci.0", pci_grackle_set_irq, pci_grackle_map_irq, pic, 0, 4); diff --git a/hw/gt64xxx.c b/hw/gt64xxx.c index 55971b9..756e1bf 100644 --- a/hw/gt64xxx.c +++ b/hw/gt64xxx.c @@ -1113,7 +1113,7 @@ PCIBus *pci_gt64120_init(qemu_irq *pic) s = qemu_mallocz(sizeof(GT64120State)); s->pci = qemu_mallocz(sizeof(GT64120PCIState));-
s->pci->bus= pci_register_bus(NULL, "pci",
+s->pci->bus= pci_register_bus(NULL, "pci.0",pci_gt64120_set_irq, pci_gt64120_map_irq, pic, 144, 4); s->ISD_handle = cpu_register_io_memory(gt64120_read, gt64120_write, s);diff --git
a/hw/ppc4xx_pci.cb/hw/ppc4xx_pci.c
index c9e3279..dc1d2f8 100644
---a/hw/ppc4xx_pci.c
+++b/hw/ppc4xx_pci.c
@@ -357,7 +357,7 @@ PCIBus *ppc4xx_pci_init(CPUState *env,qemu_irqpci_irqs[4],controller = qemu_mallocz(sizeof(PPC4xxPCIState));-
controller->pci_state.bus= pci_register_bus(NULL, "pci",
+controller->pci_state.bus= pci_register_bus(NULL, "pci.0",ppc4xx_pci_set_irq, ppc4xx_pci_map_irq, pci_irqs, 0, 4);diff --git
a/hw/ppce500_pci.cb/hw/ppce500_pci.c
index 336d284..fa4387a 100644
---a/hw/ppce500_pci.c
+++b/hw/ppce500_pci.c
@@ -276,7 +276,7 @@ PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4],target_phys_addr_tregisters)controller = qemu_mallocz(sizeof(PPCE500PCIState));-
controller->pci_state.bus= pci_register_bus(NULL, "pci",
+controller->pci_state.bus= pci_register_bus(NULL, "pci.0",mpc85xx_pci_set_irq, mpc85xx_pci_map_irq, pci_irqs, 0x88, 4); diff --git a/hw/prep_pci.c b/hw/prep_pci.c index 144fde0..7ea7ca5 100644 --- a/hw/prep_pci.c +++ b/hw/prep_pci.c @@ -117,7 +117,7 @@ PCIBus *pci_prep_init(qemu_irq *pic) int PPC_io_memory; s = qemu_mallocz(sizeof(PREPPCIState)); - s->bus = pci_register_bus(NULL, "pci", + s->bus = pci_register_bus(NULL, "pci.0", prep_set_irq, prep_map_irq, pic, 0, 4); pci_host_conf_register_ioport(0xcf8, s); diff --git a/hw/sh_pci.c b/hw/sh_pci.c index cc2f190..0e138ed 100644 --- a/hw/sh_pci.c +++ b/hw/sh_pci.c @@ -98,7 +98,7 @@ PCIBus *sh_pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq, int reg; p = qemu_mallocz(sizeof(SHPCIC)); - p->bus = pci_register_bus(NULL, "pci", + p->bus = pci_register_bus(NULL, "pci.0", set_irq, map_irq, opaque, devfn_min, nirq); p->dev = pci_register_device(p->bus, "SH PCIC", sizeof(PCIDevice), diff --git a/hw/unin_pci.c b/hw/unin_pci.c index f0a773d..57c56e0 100644 --- a/hw/unin_pci.c +++ b/hw/unin_pci.c @@ -226,7 +226,7 @@ PCIBus *pci_pmac_init(qemu_irq *pic) qdev_init_nofail(dev); s = sysbus_from_qdev(dev); d = FROM_SYSBUS(UNINState, s); - d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci", + d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci.0", pci_unin_set_irq, pci_unin_map_irq, pic, 11 << 3, 4);@@ -278,7 +278,7 @@ PCIBus *pci_pmac_u3_init(qemu_irq *pic)
s = sysbus_from_qdev(dev); d = FROM_SYSBUS(UNINState, s);-
d->host_state.bus= pci_register_bus(&d->busdev.qdev, "pci",
+d->host_state.bus= pci_register_bus(&d->busdev.qdev, "pci.0",pci_unin_set_irq, pci_unin_map_irq, pic, 11 << 3, 4);diff --git
a/hw/versatile_pci.cb/hw/versatile_pci.cindex 199bc19..d0469ff 100644
---a/hw/versatile_pci.c
+++b/hw/versatile_pci.c
@@ -125,7 +125,7 @@ static intpci_vpb_init(SysBusDevice *dev)for (i = 0; i < 4; i++) { sysbus_init_irq(dev, &s->irq[i]); } - bus = pci_register_bus(&dev->qdev, "pci", + bus = pci_register_bus(&dev->qdev, "pci.0", pci_vpb_set_irq, pci_vpb_map_irq, s->irq, 11 << 3, 4);--
1.6.6.1
Quoted 19 lines · Blue Swirl
Quoted 9 lines · Daniel P. Berrange
The system emulators for each arch are using inconsistent
naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'Signed-off-by Daniel P. Berrange <[email protected]>---
Quoted 8 lines
hw/grackle_pci.c | 2 +- hw/gt64xxx.c | 2 +- hw/ppc4xx_pci.c | 2 +- hw/ppce500_pci.c | 2 +- hw/prep_pci.c | 2 +- hw/sh_pci.c | 2 +- hw/unin_pci.c | 4 ++-- hw/versatile_pci.c | 2 +-
Quoted 1 line
Missing
hw/apb_pci.c.
Ah yes, don't know how I missed that. Have posted another version of this patch with that included
Daniel
Signature · 4 lines
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
Paul
Quoted 7 lines · Paul Brook
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
Quoted 6 lines
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
From
qbus_create_inplace():
if (name) {
/* use supplied name */
bus->name = qemu_strdup(name);
} else if (parent && parent->id) {
/* parent device has id -> use it for bus name */
len = strlen(parent->id) + 16;
buf = qemu_malloc(len);
snprintf(buf, len, "%s.%d", parent->id, parent->num_child_bus);
bus->name = buf;
} else {
/* no id -> use lowercase bus type for bus name */
len = strlen(info->name) + 16;
buf = qemu_malloc(len);
len = snprintf(buf, len, "%s.%d", info->name,
parent ? parent->num_child_bus : 0);
for (i = 0; i < len; i++)
buf[i] = qemu_tolower(buf[i]);
bus->name = buf;
}If appending ".0" really makes no sense when the device has just one bus, then we shouldn't append it in cases 2 & 3.
But I'd simply append it always. One bus is just as countable as many.
Quoted 36 lines
Quoted 7 lines · Paul Brook
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
Quoted 5 lines
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
From
qbus_create_inplace():if (name) { /* use supplied name */ bus->name = qemu_strdup(name); } else if (parent && parent->id) { /* parent device has id -> use it for bus name */ len = strlen(parent->id) + 16; buf = qemu_malloc(len); snprintf(buf, len, "%s.%d", parent->id, parent->num_child_bus); bus->name = buf; } else { /* no id -> use lowercase bus type for bus name */ len = strlen(info->name) + 16; buf = qemu_malloc(len); len = snprintf(buf, len, "%s.%d", info->name, parent ? parent->num_child_bus : 0); for (i = 0; i < len; i++) buf[i] = qemu_tolower(buf[i]); bus->name = buf; }
Quoted 2 lines
If appending ".0" really makes no sense when the device has just one bus, then we shouldn't append it in cases 2 & 3.
IMO the code you quote is completely bogus. All devices should specify names for their child busses, failure to do so is a bug.
These bus names are local to the parent device. Trying to use them as global identifiers is just plain wrong. A given device [type] should always have the same set of properties/child busses regardless of where it occurs in the device tree.
Using a single counter for all busses is also wrong. The order of bus creation is a device implementation detail, under no circumstances should it be part of the user visible API. Consider a device that has both a PCI and I2C bus. It makes no sense to call there pci.0 and i2c.1.
Paul
Quoted 39 lines · Paul Brook
Quoted 36 lines
Quoted 7 lines · Paul Brook
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
Quoted 5 lines
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
From
qbus_create_inplace():if (name) { /* use supplied name */ bus->name = qemu_strdup(name); } else if (parent && parent->id) { /* parent device has id -> use it for bus name */ len = strlen(parent->id) + 16; buf = qemu_malloc(len); snprintf(buf, len, "%s.%d", parent->id, parent->num_child_bus); bus->name = buf; } else { /* no id -> use lowercase bus type for bus name */ len = strlen(info->name) + 16; buf = qemu_malloc(len); len = snprintf(buf, len, "%s.%d", info->name, parent ? parent->num_child_bus : 0); for (i = 0; i < len; i++) buf[i] = qemu_tolower(buf[i]); bus->name = buf; }Quoted 2 lines
If appending ".0" really makes no sense when the device has just one bus, then we shouldn't append it in cases 2 & 3.
Quoted 7 lines
IMO the code you quote is completely bogus. All devices should specify names for their child busses, failure to do so is a bug.
These bus names are local to the parent device. Trying to use them as global identifiers is just plain wrong. A given device [type] should always have the same set of properties/child busses regardless of where it occurs in the device tree.
I agree.
Case in point: For a bug fix I'm working on, I need to find the drives connected to an IDE controller. Should be easy enough: go from controller qdev to its qbus, iterate over the qdevs on that bus. I need to call qdev_get_child_bus() for the first step, obviously. But what to pass as name argument? -EMAGIC.
Note that I *only* object to case 2 (derive bus name from parent device's ID). Case 3 (derive bus name from bus type) is fine with me.
Quoted 4 lines
Using a single counter for all busses is also wrong. The order of bus creation is a device implementation detail, under no circumstances should it be part of the user visible API. Consider a device that has both a PCI and I2C bus. It makes no sense to call there pci.0 and i2c.1.
Yes, that's a bit ugly.
Quoted 9 lines
Note that I *only* object to case 2 (derive bus name from parent device's ID). Case 3 (derive bus name from bus type) is fine with me.
Quoted 4 lines
Using a single counter for all busses is also wrong. The order of bus creation is a device implementation detail, under no circumstances should it be part of the user visible API. Consider a device that has both a PCI and I2C bus. It makes no sense to call there pci.0 and i2c.1.
Yes, that's a bit ugly.
I'd accept deriving bus name from bus type (case 3) if we remove the numbering.
If there are multiple busses of the same type then the parent device must provide a name. In this case I don't believe generic code has enough knowledge to make sensible or consistent choices. A user-visible interface defined by internal implementation details (order of creation) makes me twitchy.
Take a graphics card as an example of something with multiple I2C busses. IMO it would make much more sense to call them things like ".ddc" and ".sensors" than ".0" and ".1".
Paul
Quoted 7 lines · Paul Brook
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
Quoted 5 lines
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
The problem is that the ID names of default devices in machines are ABI sensitive. Management apps need to know what the ID of these default devices are. The x86 machines have already used 'pci.0' as their name in the previous 0.12 release and libvirt is using this naming. We later discovered many non-x86 archs have a name of just 'pci'. We need a single consistent naming across all arches, hence this patch whcih standardizes on 'pci.0'. The '.N' convention is used extensively in QEMU and is more futureproof as & when QEMU supports multiple buses, without requiring apps to use the more verbose device paths to ensure uniquness.
Daniel
Signature · 4 lines
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
Quoted 7 lines
The problem is that the ID names of default devices in machines are ABI sensitive. Management apps need to know what the ID of these default devices are. The x86 machines have already used 'pci.0' as their name in the previous 0.12 release and libvirt is using this naming. We later discovered many non-x86 archs have a name of just 'pci'. We need a single consistent naming across all arches, hence this patch whcih standardizes on 'pci.0'.
I think you'll find x86 qdev conversion is both incomplete and incorrect. Specifically i440fx_int breaks several abstraction boundaries. I raised this issue at the time, but was told this was only temporary, and would be fixed. x86 should be made to match the arches that have been converted properly.
Quoted 3 lines
The '.N' convention is used extensively in QEMU and is more futureproof as & when QEMU supports multiple buses, without requiring apps to use the more verbose device paths to ensure uniquness.
I disagree. Anything that depends on device creation order is fundamentally broken. If you want to create globally unique user-friendly tags for devices or busses then that is a completely different problem, and should be done via explicit aliases. qemu currently has no concept of a "default bus".
Paul
Hi,
Quoted 4 lines
I disagree. Anything that depends on device creation order is fundamentally broken. If you want to create globally unique user-friendly tags for devices or busses then that is a completely different problem, and should be done via explicit aliases.
For anything created via -device the id does the job. The device gets tagged with the supplied id, and any child busses of that device carry the id too, i.e.
-device lsi,id=foo
creates a lsi scsi hostadapter with id 'foo' and a scsi bus with the name 'foo.0'. A (theoretical) scsi hba with two scsi busses would have 'foo.0' and 'foo.1' child busses. If you don't specify a id you'll get 'scsi.$nr'. Numbers are per device, not global. So if you add two lsi adapters without id you'll get two 'scsi.0' busses, so better don't do that if you want be able to address them via bus= ...
For devices created by machine->init() the names are more or less hard-coded in qemu though (and hopefully some day in some machine description file). 'pci.0' is the default name for a pci bus and IMHO a good choice for the primary pci bus. secondary busses created by machine->init() (sparc64 does this I think) should get some other name.
cheers,
Gerd
Quoted 11 lines
Hi,Quoted 4 lines
I disagree. Anything that depends on device creation order is fundamentally broken. If you want to create globally unique user-friendly tags for devices or busses then that is a completely different problem, and should be done via explicit aliases.
For anything created via -device the id does the job. The device gets tagged with the supplied id, and any child busses of that device carry the id too, i.e.
Quoted 8 lines
-device lsi,id=foo
creates a lsi scsi hostadapter with id 'foo' and a scsi bus with the name 'foo.0'. A (theoretical) scsi hba with two scsi busses would have 'foo.0' and 'foo.1' child busses. If you don't specify a id you'll get 'scsi.$nr'. Numbers are per device, not global. So if you add two lsi adapters without id you'll get two 'scsi.0' busses, so better don't do that if you want be able to address them via bus= ...
IMO the name of the bus should not depend on the id of the device. Bus names should be used to distinguish between different child busses within the same device. The parent device (plus local bus name if necessary) is more than sufficient to identify the bus. One of the key features of the bus/device framework is that it gives us a tree structure and avoids the need for globally unique names. The real bug here is that the bus specifier should be a tree address. Once you do that you don't need the weird bus naming, and any aliases you create for a device can be trivially used to locate its child busses.
As mentioned previously, I think devices should be specifying the names of their child busses, and anything that passes NULL to qbus_create is just plain wrong. Trying to automagically allocate names is IMO fundamentally flawed.
Paul
Am 02.06.2010 um 16:12 schrieb Daniel P. Berrange:
Quoted 14 lines · Paul Brook
Quoted 7 lines
Quoted 6 lines
The system emulators for each arch are using inconsistent naming for the default PCI bus "pci" vs "pci.0". Since it is conceivable we'll have multiple PCI buses in the future standardize on "pci.0" for all architectures. This ensures mgmt apps can rely on a name when assigning PCI devices an address on the bus using eg '-device e1000,bus=pci.0,addr=3'
Quoted 5 lines
No. Bus names are local to the parent device. None of the host bridges support multiple bridges, so the ".0" suffix makes no sense. The parent device has no idea whether it owns the "default" pci bus or not. If you have multiple PCI busses then you can identify them by the device path.
Quoted 7 lines
The problem is that the ID names of default devices in machines are ABI sensitive. Management apps need to know what the ID of these default devices are. The x86 machines have already used 'pci.0' as their name in the previous 0.12 release and libvirt is using this naming. We later discovered many non-x86 archs have a name of just 'pci'. We need a single consistent naming across all arches, hence this patch whcih standardizes on 'pci.0'.
Iiuc sparc and ppc try to follow the IEEE1275 OpenFirmware naming conventions. Those should not blindly be patched to some random convention just to make them more x86-like. OpenFirmware uses pci@80000000 on my ppc machine. In other places, e.g. disks, numbering appears to be done locally via @0, @1, etc. See show-devs for a complete listing.
As suggested by Paul there are device aliases, so that in qemu-system-ppc -cdrom /dev/null you can run dev pci followed by pwd to see the real device name. Lacking a working devalias, see dev /aliases .properties for some more: screen, nvram, cd, cdrom, scca, sccb, adb-keyboard, adb-mouse
Andreas
Quoted 14 lines
The '.N' convention is used extensively in QEMU and is more futureproof as & when QEMU supports multiple buses, without requiring apps to use the more verbose device paths to ensure uniquness.
Daniel
Signature · 7 lines
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|