eukrea_mbimx27-baseboard: fix typo in display name
PATCH 1/13 eukrea_mbimx27-baseboard: fix typo in display name
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +1 -1
@@ -127,7 +127,7 @@ static struct platform_device leds_gpio = {static struct imx_fb_videomode eukrea_mbimx27_modes[] = { { .mode = { - .name ="CMO-QGVA" , + .name ="CMO-QVGA" , .refresh =60 , .xres =320 , .yres =240 ,
Signature · 1 line
1.6.3.3
PATCH 2/13 eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 55 +++++++++++++++++++++++--- 1 files changed, 49 insertions(+), 6 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +49 -6
@@ -24,6 +24,8 @@#include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/backlight.h> +#include <video/platform_lcd.h> #include <asm/mach/arch.h>
@@ -103,12 +105,6 @@ static struct gpio_led gpio_leds[] = { .active_low = 1, .gpio = GPIO_PORTF | 19, }, - { - .name = "backlight", - .default_trigger = "backlight", - .active_low = 0, - .gpio = GPIO_PORTE | 5, - }, }; static struct gpio_led_platform_data gpio_led_info = {
@@ -153,6 +149,47 @@ static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { .dmacr = 0x00040060, }; +static void eukrea_mbimx27_bl_set_intensity (int intensity) +{ +if (intensity) +gpio_direction_output (GPIO_PORTE |5 ,1 ); +else +gpio_direction_output (GPIO_PORTE |5 ,0 ); +} + +static struct generic_bl_info eukrea_mbimx27_bl_info = { + .name ="eukrea_mbimx27-bl" , + .max_intensity =0xff , + .default_intensity =0xff , + .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, +}; + +static struct platform_device eukrea_mbimx27_bl_dev = { + .name ="generic-bl" , + .id =1 , + .dev = { + .platform_data = &eukrea_mbimx27_bl_info, + }, +}; + +static void eukrea_mbimx27_lcd_power_set (struct plat_lcd_data *pd, +unsigned int power) +{ +if (power) +gpio_direction_output (GPIO_PORTA |25 ,1 ); +else +gpio_direction_output (GPIO_PORTA |25 ,0 ); +} + +static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { + .set_power = eukrea_mbimx27_lcd_power_set, +}; + +static struct platform_device eukrea_mbimx27_lcd_powerdev = { + .name ="platform-lcd" , + .dev.platform_data = &eukrea_mbimx27_lcd_power_data, +}; +static struct imxuart_platform_data uart_pdata[] = { { .flags =IMXUART_HAVE_RTSCTS ,
@@ -244,6 +281,12 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_gpio_mode (GPIO_PORTF |19 |GPIO_GPIO |GPIO_OUT );/* Backlight */ mxc_gpio_mode (GPIO_PORTE |5 |GPIO_GPIO |GPIO_OUT ); +gpio_request (GPIO_PORTE |5 ,"backlight" ); +platform_device_register (&eukrea_mbimx27_bl_dev); +/* LCD Reset */ +mxc_gpio_mode (GPIO_PORTA |25 |GPIO_GPIO |GPIO_OUT ); +gpio_request (GPIO_PORTA |25 ,"lcd_enable" ); +platform_device_register (&eukrea_mbimx27_lcd_powerdev);platform_add_devices (platform_devices,ARRAY_SIZE (platform_devices)); }
Signature · 1 line
1.6.3.3
PATCH 3/13 eukrea_mbimx27-baseboard: add timings for DVI output
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 32 ++++++++++++++++++++++++++ 1 files changed, 32 insertions(+), 0 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +32 -0
@@ -137,6 +137,38 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = { }, .pcr = 0xFAD08B80, .bpp = 16, + }, { + .mode = { + .name = "DVI-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 32000, + .hsync_len = 1, + .left_margin = 35, + .right_margin = 0, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 0, + }, + .pcr = 0xFA208B80, + .bpp = 16, + }, { + .mode = { + .name = "DVI-SVGA", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .hsync_len = 1, + .left_margin = 35, + .right_margin = 0, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 0, + }, + .pcr = 0xFA208B80, + .bpp = 16, }, };
Signature · 1 line
1.6.3.3
PATCH 4/13 cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
--- arch/arm/mach-mx2/Kconfig | 9 ++++++++- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 8 ++++++++ arch/arm/mach-mx2/mach-cpuimx27.c | 6 ++++++ 3 files changed, 22 insertions(+), 1 deletions(-)
arch/arm/mach-mx2/Kconfig +8 -1
@@ -67,9 +67,16 @@ config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" depends on MACH_CPUIMX27 help - This adds support for the internal SDHC2 used on CPUIMX27 used + This adds support for the internal SDHC2 used on CPUIMX27 for wifi or eMMC. +config MACH_EUKREA_CPUIMX27_USEUART4 + bool "CPUIMX27 integrates UART4 module" + depends on MACH_CPUIMX27 + help + This adds support for the internal UART4 used on CPUIMX27 + for bluetooth. + choice prompt "Baseboard" depends on MACH_CPUIMX27
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +8 -0
@@ -50,10 +50,12 @@ static int eukrea_mbimx27_pins[] = {PE10_PF_UART3_CTS ,PE11_PF_UART3_RTS ,/* UART4 */ +#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)PB26_AF_UART4_RTS ,PB28_AF_UART4_TXD ,PB29_AF_UART4_CTS ,PB31_AF_UART4_RXD , +#endif/* SDHC1*/ PE18_PF_SD1_D0 , PE19_PF_SD1_D1,
@@ -229,6 +231,9 @@ static struct imxuart_platform_data uart_pdata[] = { { .flags = IMXUART_HAVE_RTSCTS, }, + { + .flags = IMXUART_HAVE_RTSCTS, + }, };#if defined(CONFIG_TOUCHSCREEN_ADS7846 )
@@ -293,6 +298,9 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_register_device (&mxc_uart_device1, &uart_pdata[0 ]);mxc_register_device (&mxc_uart_device2, &uart_pdata[1 ]); +#if !defined(MACH_EUKREA_CPUIMX27_USEUART4 ) +mxc_register_device (&mxc_uart_device3, &uart_pdata[2 ]); +#endif mxc_register_device (&mxc_fb_device, &eukrea_mbimx27_fb_data);mxc_register_device (&mxc_sdhc_device0,NULL );
arch/arm/mach-mx2/mach-cpuimx27.c +6 -0
@@ -49,10 +49,12 @@ static int eukrea_cpuimx27_pins[] = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS,/* UART4 */ +#if defined(MACH_EUKREA_CPUIMX27_USEUART4 )PB26_AF_UART4_RTS ,PB28_AF_UART4_TXD ,PB29_AF_UART4_CTS ,PB31_AF_UART4_RXD , +#endif/* FEC */ PD0_AIN_FEC_TXD0 , PD1_AIN_FEC_TXD1,
@@ -76,12 +78,14 @@ static int eukrea_cpuimx27_pins[] = { PD17_PF_I2C_DATA, PD18_PF_I2C_CLK,/* SDHC2 */ +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, +#endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)/* Quad UART's IRQ */ GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
@@ -202,6 +206,8 @@ static void __init eukrea_cpuimx27_init(void)#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2 )/* SDHC2 can be used for Wifi */ mxc_register_device (&mxc_sdhc_device1,NULL ); +#endif +#if defined(MACH_EUKREA_CPUIMX27_USEUART4 )/* in which case UART4 is also used for Bluetooth */ mxc_register_device (&mxc_uart_device3, &uart_pdata[1 ]);#endif
Signature · 1 line
1.6.3.3
PATCH 5/13 mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
--- arch/arm/mach-mx2/mach-cpuimx27.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-mx2/mach-cpuimx27.c +4 -4
@@ -88,10 +88,10 @@ static int eukrea_cpuimx27_pins[] = {#endif #if defined(CONFIG_SERIAL_8250 ) || defined(CONFIG_SERIAL_8250_MODULE )/* Quad UART's IRQ */ -GPIO_PORTD |22 |GPIO_GPIO |GPIO_IN , -GPIO_PORTD |23 |GPIO_GPIO |GPIO_IN , -GPIO_PORTD |27 |GPIO_GPIO |GPIO_IN , - GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN, +GPIO_PORTB |22 |GPIO_GPIO |GPIO_IN , +GPIO_PORTB |23 |GPIO_GPIO |GPIO_IN , +GPIO_PORTB |27 |GPIO_GPIO |GPIO_IN , + GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, #endif };
Signature · 1 line
1.6.3.3
PATCH 6/13 eukrea_mbimx27: fix ADS7846 support
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +12 -7
@@ -35,6 +35,7 @@#include <mach/hardware.h> #include <mach/mmc.h> #include <mach/imx-uart.h> +#include <mach/spi.h> #include "devices.h"
@@ -88,7 +89,6 @@ static int eukrea_mbimx27_pins[] = {PA30_PF_CONTRAST ,PA31_PF_OE_ACD ,/* SPI1 */ -PD28_PF_CSPI1_SS0 ,PD29_PF_CSPI1_SCLK ,PD30_PF_CSPI1_MISO , PD31_PF_CSPI1_MOSI,
@@ -236,7 +236,7 @@ static struct imxuart_platform_data uart_pdata[] = { }, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE )#define ADS7846_PENDOWN (GPIO_PORTD | 25)
@@ -247,7 +247,6 @@ static void ads7846_dev_init(void)printk (KERN_ERR "can't get ads746 pen down GPIO\n" );return ; } -gpio_direction_input (ADS7846_PENDOWN ); }
@@ -260,7 +259,9 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; +#endif +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846",
@@ -305,15 +306,19 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_register_device (&mxc_fb_device, &eukrea_mbimx27_fb_data);mxc_register_device (&mxc_sdhc_device0,NULL ); -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE ) -/* SPI and ADS7846 Touchscreen controler init */ -mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT ); +/* ADS7846 Touchscreen controler init */ mxc_gpio_mode (GPIO_PORTD |25 |GPIO_GPIO |GPIO_IN ); +ads7846_dev_init (); +#endif + +#if defined(CONFIG_SPI_IMX ) || defined(CONFIG_SPI_IMX_MODULE ) +/* SPI_CS0 init */ +mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT );mxc_register_device (&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);spi_register_board_info (eukrea_mbimx27_spi_board_info,ARRAY_SIZE (eukrea_mbimx27_spi_board_info)); -ads7846_dev_init ();#endif /* Leds configuration */
Signature · 1 line
1.6.3.3
PATCH 7/13 mach-cpuimx27: add USB Host2 and OTG support
support copied from mach-pca100.c
--- arch/arm/mach-mx2/Kconfig | 1 + arch/arm/mach-mx2/mach-cpuimx27.c | 77 +++++++++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+), 0 deletions(-)
arch/arm/mach-mx2/Kconfig +1 -0
@@ -59,6 +59,7 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" depends on MACH_MX27 + select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals.
arch/arm/mach-mx2/mach-cpuimx27.c +77 -0
107 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH 8/13 mach-cpuimx27: register wdt and w1_master resources
--- arch/arm/mach-mx2/mach-cpuimx27.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/mach-mx2/mach-cpuimx27.c +2 -0
@@ -162,6 +162,8 @@ static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {static struct platform_device *platform_devices[]__initdata = { &eukrea_cpuimx27_nor_mtd_device, &mxc_fec_device, + &mxc_wdt, + &mxc_w1_master_device, };static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
Signature · 1 line
1.6.3.3
PATCH 9/13 mxcmmc: add card detect through DAT3 possibility
--- arch/arm/plat-mxc/include/mach/mmc.h | 3 +++ drivers/mmc/host/mxcmmc.c | 16 +++++++++++++--- 2 files changed, 16 insertions(+), 3 deletions(-)
arch/arm/plat-mxc/include/mach/mmc.h +3 -0
@@ -31,6 +31,9 @@ struct imxmmc_platform_data {/* adjust slot voltage */ void (*setpower)(struct device *,unsigned int vdd); + +/* enable card detect using DAT3 */ + int dat3_card_detect; };#endif
drivers/mmc/host/mxcmmc.c +13 -3
@@ -119,6 +119,7 @@ struct mxcmci_host {int detect_irq;int dma;int do_dma; +int default_irq_mask;int use_sdio;unsigned int power_mode;struct imxmmc_platform_data *pdata;
@@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)static int mxcmci_start_cmd (struct mxcmci_host *host,struct mmc_command *cmd,unsigned int cmdat) { -u32 int_cntr; +u32 int_cntr = host->default_irq_mask;unsigned long flags;WARN_ON (host->cmd !=NULL );
@@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,static void mxcmci_finish_request (struct mxcmci_host *host,struct mmc_request *req) { -u32 int_cntr =0 ; +u32 int_cntr = host->default_irq_mask;unsigned long flags;spin_lock_irqsave (&host->lock, flags);
@@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))mxcmci_data_done (host, stat);#endif +if (host->default_irq_mask && + (stat & (STATUS_CARD_INSERTION |STATUS_CARD_REMOVAL ))) +mmc_detect_change (host->mmc,msecs_to_jiffies (200 ));return IRQ_HANDLED ; }
@@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev)else mmc->ocr_avail =MMC_VDD_32_33 |MMC_VDD_33_34 ; +if (host->pdata && host->pdata->dat3_card_detect) + host->default_irq_mask = +INT_CARD_INSERTION_EN |INT_CARD_REMOVAL_EN ; +else + host->default_irq_mask =0 ; + host->res = r; host->irq = irq;
@@ -835,7 +845,7 @@ static int mxcmci_probe(struct platform_device *pdev)/* recommended in data sheet */ writew (0x2db4 , host->base +MMC_REG_READ_TO ); -writel (0 , host->base +MMC_REG_INT_CNTR ); +writel (host->default_irq_mask, host->base +MMC_REG_INT_CNTR );#ifdef HAS_DMA host->dma =imx_dma_request_by_prio (DRIVER_NAME ,DMA_PRIO_LOW );
Signature · 1 line
1.6.3.3
PATCH 10/13 eukrea_mbimx27: use card detect through DAT3 for SDHC1
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +5 -1
@@ -286,6 +286,10 @@ static struct platform_device *platform_devices[] __initdata = { &leds_gpio, }; +static struct imxmmc_platform_data sdhc_pdata = { + .dat3_card_detect =1 , +}; +/* * system init for baseboard usage. Will be called by cpuimx27 init. *
@@ -304,7 +308,7 @@ void __init eukrea_mbimx27_baseboard_init(void)#endif mxc_register_device (&mxc_fb_device, &eukrea_mbimx27_fb_data); -mxc_register_device (&mxc_sdhc_device0,NULL ); +mxc_register_device (&mxc_sdhc_device0, &sdhc_pdata);#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE )
Signature · 1 line
1.6.3.3
PATCH 11/13 MX2X: Add Keypad device definition for MX2X arch
Based on work from Alberto Panizzo for MX3X
--- arch/arm/mach-mx2/devices.c | 18 ++++++++++++++++++ arch/arm/mach-mx2/devices.h | 1 + 2 files changed, 19 insertions(+), 0 deletions(-)
arch/arm/mach-mx2/devices.c +18 -0
@@ -501,3 +501,21 @@ struct platform_device mx21_usbhc_device = { };#endif +static struct resource imx_kpp_resources[] = { + { + .start = MX2x_KPP_BASE_ADDR, + .end = MX2x_KPP_BASE_ADDR +0xf , + .flags =IORESOURCE_MEM + }, { + .start = MX2x_INT_KPP, + .end = MX2x_INT_KPP, + .flags =IORESOURCE_IRQ , + }, +}; + +struct platform_device imx_kpp_device = { + .name ="imx-keypad" , + .id =-1 , + .num_resources =ARRAY_SIZE (imx_kpp_resources), + .resource = imx_kpp_resources, +};
arch/arm/mach-mx2/devices.h +1 -0
@@ -40,3 +40,4 @@ extern struct platform_device mxc_spi_device2;extern struct platform_device mx21_usbhc_device;extern struct platform_device imx_ssi_device0;extern struct platform_device imx_ssi_device1; +extern struct platform_device imx_kpp_device;
Signature · 1 line
1.6.3.3
PATCH 12/13 eukrea_mbimx27: add support for the keyboard
--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +15 -0
@@ -26,6 +26,7 @@#include <linux/spi/ads7846.h> #include <linux/backlight.h> #include <video/platform_lcd.h> +#include <linux/input/matrix_keypad.h> #include <asm/mach/arch.h>
@@ -94,6 +95,18 @@ static int eukrea_mbimx27_pins[] = { PD31_PF_CSPI1_MOSI, }; +static const uint32_t eukrea_mbimx27_keymap[] = { +KEY (0 ,0 ,KEY_UP ), +KEY (0 ,1 ,KEY_DOWN ), +KEY (1 ,0 ,KEY_RIGHT ), +KEY (1 ,1 ,KEY_LEFT ), +}; + +static struct matrix_keymap_data eukrea_mbimx27_keymap_data = { + .keymap = eukrea_mbimx27_keymap, + .keymap_size =ARRAY_SIZE (eukrea_mbimx27_keymap), +}; +static struct gpio_led gpio_leds[] = { { .name ="led1" ,
@@ -337,5 +350,7 @@ void __init eukrea_mbimx27_baseboard_init(void)gpio_request (GPIO_PORTA |25 ,"lcd_enable" );platform_device_register (&eukrea_mbimx27_lcd_powerdev); +mxc_register_device (&imx_kpp_device, &eukrea_mbimx27_keymap_data); +platform_add_devices (platform_devices,ARRAY_SIZE (platform_devices)); }
Signature · 1 line
1.6.3.3
PATCH 13/13 mx27_defconfig: update to enable cpuimx27 & mbimx27
Also enable supported peripherals to build a full working configuration
--- arch/arm/configs/mx27_defconfig | 512 ++++++++++++++++++++++++++++++++++----- 1 files changed, 446 insertions(+), 66 deletions(-)
arch/arm/configs/mx27_defconfig +446 -66
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Fri Jul 24 16:08:06 2009 +# Linux kernel version: 2.6.34 +# Wed May 19 18:36:55 2010 # CONFIG_ARM=y CONFIG_HAVE_PWM=y
@@ -9,7 +9,7 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -20,7 +20,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_MTD_XIP=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -35,6 +35,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y
@@ -47,18 +53,15 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set
@@ -84,19 +87,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y
@@ -129,24 +133,53 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set
@@ -163,6 +196,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set
@@ -171,16 +205,24 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set
@@ -189,7 +231,10 @@ CONFIG_ARCH_MXC=y # # CONFIG_ARCH_MX1 is not set CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX25 is not set # CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MXC91231 is not set +# CONFIG_ARCH_MX5 is not set # CONFIG_MACH_MX21 is not set CONFIG_MACH_MX27=y
@@ -199,10 +244,19 @@ CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MACH_CPUIMX27=y +CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y +CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y +CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27LITE=y +# CONFIG_MACH_PCA100 is not set +# CONFIG_MACH_MXT_TD60 is not set CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_MXC_ULPI=y +CONFIG_IMX_HAVE_IOMUX_V1=y +CONFIG_ARCH_MXC_AUDMUX_V1=y # # Processor Type
@@ -210,7 +264,7 @@ CONFIG_MXC_PWM=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y
@@ -225,6 +279,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_COMMON_CLKDEV=y #
@@ -245,6 +300,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y
@@ -259,12 +316,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -309,6 +365,7 @@ CONFIG_HAVE_AOUT=y # CONFIG_PM=y CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set # CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y
@@ -316,6 +373,8 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y
@@ -323,7 +382,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y
@@ -358,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set
@@ -381,13 +440,28 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +# CONFIG_MAC80211 is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set
@@ -400,6 +474,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y
@@ -409,9 +484,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set
@@ -459,7 +534,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access
@@ -475,6 +549,7 @@ CONFIG_MTD_PHYSMAP=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set
@@ -495,6 +570,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set
@@ -519,15 +595,24 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set #
@@ -538,16 +623,47 @@ CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y
@@ -578,20 +694,37 @@ CONFIG_NET_ETHERNET=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_IWM is not set +CONFIG_LIBERTAS=y +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_MESH is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # -# Enable WiMAX (Networking options) to see the WiMAX drivers +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
@@ -599,6 +732,7 @@ CONFIG_FEC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support
@@ -606,6 +740,7 @@ CONFIG_FEC=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces
@@ -618,27 +753,44 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +CONFIG_KEYBOARD_IMX=y +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set +CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set
@@ -664,7 +816,11 @@ CONFIG_DEVKMEM=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support
@@ -674,6 +830,7 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set
@@ -684,6 +841,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y
@@ -699,31 +857,23 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y
@@ -732,26 +882,37 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders:
@@ -762,11 +923,17 @@ CONFIG_GPIOLIB=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# CONFIG_W1=y # # 1-wire Bus Masters # +# CONFIG_W1_MASTER_DS2490 is not set # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y # CONFIG_W1_MASTER_DS1WM is not set
@@ -784,7 +951,6 @@ CONFIG_W1_SLAVE_THERM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y
@@ -797,10 +963,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set
@@ -808,11 +976,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set #
@@ -848,7 +1023,18 @@ CONFIG_FB_IMX=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +# CONFIG_BACKLIGHT_PWM is not set # # Display device support
@@ -861,8 +1047,8 @@ CONFIG_FB_IMX=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y # CONFIG_FONT_8x16 is not set
@@ -874,10 +1060,161 @@ CONFIG_FONT_8x8=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set -# CONFIG_LOGO is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_MXC=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +CONFIG_USB_GADGET_FSL_USB2=y +CONFIG_USB_FSL_USB2=y +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_USB_ULPI=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -897,8 +1234,36 @@ CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_MXC=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y
@@ -927,6 +1292,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set
@@ -942,6 +1308,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers
@@ -955,7 +1322,10 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_MXC is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set #
@@ -963,8 +1333,11 @@ CONFIG_RTC_DRV_PCF8563=y # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set #
@@ -980,6 +1353,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set
@@ -1044,6 +1418,7 @@ CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set
@@ -1054,7 +1429,6 @@ CONFIG_UBIFS_FS_ZLIB=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y
@@ -1069,6 +1443,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set
@@ -1129,22 +1504,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set
@@ -1152,6 +1525,7 @@ CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set # # Security options
@@ -1159,13 +1533,16 @@ CONFIG_ARM_UNWIND=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set
@@ -1199,11 +1576,13 @@ CONFIG_CRYPTO_ALGAPI2=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1248,7 +1627,7 @@ CONFIG_CRYPTO_LZO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y -CONFIG_BINARY_PRINTF=y +# CONFIG_BINARY_PRINTF is not set # # Library routines
@@ -1271,3 +1650,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y
Signature · 1 line
1.6.3.3
PATCH 9/13 mxcmmc: add card detect through DAT3 possibility
In reply to Eric BénardQuoted 61 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>--- arch/arm/plat-mxc/include/mach/mmc.h | 3 +++ drivers/mmc/host/mxcmmc.c | 16 +++++++++++++--- 2 files changed, 16 insertions(+), 3 deletions(-)arch/arm/plat-mxc/include/mach/mmc.h +3
-0@@ -31,6 +31,9 @@ struct imxmmc_platform_data {/* adjust slot voltage */ void (*setpower)(struct device *,unsigned int vdd); + +/* enable card detect using DAT3 */ + int dat3_card_detect; };#endif drivers/mmc/host/mxcmmc.c +6
-2@@ -119,6 +119,7 @@ struct mxcmci_host {int detect_irq;int dma;int do_dma; +int default_irq_mask;int use_sdio;unsigned int power_mode;struct imxmmc_platform_data *pdata;@@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)static int mxcmci_start_cmd (struct mxcmci_host *host,struct mmc_command *cmd,unsigned int cmdat) { -u32 int_cntr; +u32 int_cntr = host->default_irq_mask;unsigned long flags;WARN_ON (host->cmd !=NULL );@@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,static void mxcmci_finish_request (struct mxcmci_host *host,struct mmc_request *req) { -u32 int_cntr =0 ; +u32 int_cntr = host->default_irq_mask;unsigned long flags;spin_lock_irqsave (&host->lock, flags);@@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))mxcmci_data_done (host, stat);#endif +if (host->default_irq_mask && + (stat & (STATUS_CARD_INSERTION |STATUS_CARD_REMOVAL ))) +mmc_detect_change (host->mmc,msecs_to_jiffies (200 ));return IRQ_HANDLED ; }
drivers/mmc/host/mxcmmc.c static int mxcmci_probe(struct platform_device *pdev) · line 816
Quoted 4 lines
drivers/mmc/host/mxcmmc.c +1
-0@@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev)else mmc->ocr_avail =MMC_VDD_32_33 |MMC_VDD_33_34 ; +if (host->pdata && host->pdata->dat3_card_detect)
As 0 is a valid GPIO, so you should use gpio_is_valid() here, and update all users' pdata to set dat3_card_detect = -1, so it will fail this test.
Daniel
PATCH 9/13 mxcmmc: add card detect through DAT3 possibility
Le 19/05/2010 19:11, Daniel Mack a ?crit :
Quoted 6 lines
drivers/mmc/host/mxcmmc.c static int mxcmci_probe(struct platform_device *pdev) · line 816
Quoted 1 line
drivers/mmc/host/mxcmmc.c +1
-0+if (host->pdata && host->pdata->dat3_card_detect)As 0 is a valid GPIO, so you should use
gpio_is_valid()here, and update all users' pdata to setdat3_card_detect= -1, so it will fail this test.
dat3_card_detect is not a GPIO number, it's just a flag to indicate that we want to use the internal detection feature provided by the mxcmci on DAT3 gpio (which is not used in GPIO mux).
Eric
PATCH 9/13 mxcmmc: add card detect through DAT3 possibility
Quoted 10 lines · Eric B?nard
Le 19/05/2010 19:11, Daniel Mack a ?crit :
Quoted 6 lines
drivers/mmc/host/mxcmmc.c static int mxcmci_probe(struct platform_device *pdev) · line 816
Quoted 1 line
drivers/mmc/host/mxcmmc.c +1
-0+if (host->pdata && host->pdata->dat3_card_detect)As 0 is a valid GPIO, so you should use
gpio_is_valid()here, and update all users' pdata to setdat3_card_detect= -1, so it will fail this test.
dat3_card_detectis not a GPIO number, it's just a flag to indicate that we want to use the internal detection feature provided by the mxcmci on DAT3 gpio (which is not used in GPIO mux).
I'm sorry. I should have had a closer look. Ignore me :)
Daniel
PATCH 1/1 mxcmmc: add card detect through DAT3 possibility
In reply to Eric BénardTo: s.hauer at pengutronix.de
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-mmc at vger.kernel.org
--- arch/arm/plat-mxc/include/mach/mmc.h | 3 +++ drivers/mmc/host/mxcmmc.c | 16 +++++++++++++--- 2 files changed, 16 insertions(+), 3 deletions(-)
arch/arm/plat-mxc/include/mach/mmc.h +3 -0
@@ -31,6 +31,9 @@ struct imxmmc_platform_data {/* adjust slot voltage */ void (*setpower)(struct device *,unsigned int vdd); + +/* enable card detect using DAT3 */ + int dat3_card_detect; };#endif
drivers/mmc/host/mxcmmc.c +13 -3
@@ -119,6 +119,7 @@ struct mxcmci_host {int detect_irq;int dma;int do_dma; +int default_irq_mask;int use_sdio;unsigned int power_mode;struct imxmmc_platform_data *pdata;
@@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)static int mxcmci_start_cmd (struct mxcmci_host *host,struct mmc_command *cmd,unsigned int cmdat) { -u32 int_cntr; +u32 int_cntr = host->default_irq_mask;unsigned long flags;WARN_ON (host->cmd !=NULL );
@@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,static void mxcmci_finish_request (struct mxcmci_host *host,struct mmc_request *req) { -u32 int_cntr =0 ; +u32 int_cntr = host->default_irq_mask;unsigned long flags;spin_lock_irqsave (&host->lock, flags);
@@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))mxcmci_data_done (host, stat);#endif +if (host->default_irq_mask && + (stat & (STATUS_CARD_INSERTION |STATUS_CARD_REMOVAL ))) +mmc_detect_change (host->mmc,msecs_to_jiffies (200 ));return IRQ_HANDLED ; }
@@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev)else mmc->ocr_avail =MMC_VDD_32_33 |MMC_VDD_33_34 ; +if (host->pdata && host->pdata->dat3_card_detect) + host->default_irq_mask = +INT_CARD_INSERTION_EN |INT_CARD_REMOVAL_EN ; +else + host->default_irq_mask =0 ; + host->res = r; host->irq = irq;
@@ -835,7 +845,7 @@ static int mxcmci_probe(struct platform_device *pdev)/* recommended in data sheet */ writew (0x2db4 , host->base +MMC_REG_READ_TO ); -writel (0 , host->base +MMC_REG_INT_CNTR ); +writel (host->default_irq_mask, host->base +MMC_REG_INT_CNTR );#ifdef HAS_DMA host->dma =imx_dma_request_by_prio (DRIVER_NAME ,DMA_PRIO_LOW );
Signature · 1 line
1.6.3.3
Sascha Hauer
maintainerPATCH 6/13 eukrea_mbimx27: fix ADS7846 support
In reply to Eric BénardQuoted 53 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +4
-3@@ -35,6 +35,7 @@#include <mach/hardware.h> #include <mach/mmc.h> #include <mach/imx-uart.h> +#include <mach/spi.h> #include "devices.h" @@ -88,7 +89,6 @@ static int eukrea_mbimx27_pins[] = {PA30_PF_CONTRAST ,PA31_PF_OE_ACD ,/* SPI1 */ -PD28_PF_CSPI1_SS0 ,PD29_PF_CSPI1_SCLK ,PD30_PF_CSPI1_MISO , PD31_PF_CSPI1_MOSI,@@ -236,7 +236,7 @@ static struct imxuart_platform_data uart_pdata[] = { }, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE )#define ADS7846_PENDOWN (GPIO_PORTD | 25)@@ -247,7 +247,6 @@ static void ads7846_dev_init(void)printk (KERN_ERR "can't get ads746 pen down GPIO\n" );return ; } -gpio_direction_input (ADS7846_PENDOWN ); }@@ -260,7 +259,9 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; +#endif +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846",
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c void __init eukrea_mbimx27_baseboard_init(void) · line 311
Quoted 9 lines
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +2
-3@@ -305,15 +306,19 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_register_device (&mxc_fb_device, &eukrea_mbimx27_fb_data);mxc_register_device (&mxc_sdhc_device0,NULL ); -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE ) -/* SPI and ADS7846 Touchscreen controler init */ -mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT ); +/* ADS7846 Touchscreen controler init */
s/controler/controller/
Quoted 18 lines
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +6
-1mxc_gpio_mode (GPIO_PORTD |25 |GPIO_GPIO |GPIO_IN ); +ads7846_dev_init (); +#endif + +#if defined(CONFIG_SPI_IMX ) || defined(CONFIG_SPI_IMX_MODULE ) +/* SPI_CS0 init */ +mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT );mxc_register_device (&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);spi_register_board_info (eukrea_mbimx27_spi_board_info,ARRAY_SIZE (eukrea_mbimx27_spi_board_info)); -ads7846_dev_init ();#endif /* Leds configuration */ Signature · 1 line
1.6.3.3
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH v2 1/1 eukrea_mbimx27: fix ADS7846 support
---
v2 : fix type in comments
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +12 -7
@@ -35,6 +35,7 @@#include <mach/hardware.h> #include <mach/mmc.h> #include <mach/imx-uart.h> +#include <mach/spi.h> #include "devices.h"
@@ -88,7 +89,6 @@ static int eukrea_mbimx27_pins[] = {PA30_PF_CONTRAST ,PA31_PF_OE_ACD ,/* SPI1 */ -PD28_PF_CSPI1_SS0 ,PD29_PF_CSPI1_SCLK ,PD30_PF_CSPI1_MISO , PD31_PF_CSPI1_MOSI,
@@ -236,7 +236,7 @@ static struct imxuart_platform_data uart_pdata[] = { }, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE )#define ADS7846_PENDOWN (GPIO_PORTD | 25)
@@ -247,7 +247,6 @@ static void ads7846_dev_init(void)printk (KERN_ERR "can't get ads746 pen down GPIO\n" );return ; } -gpio_direction_input (ADS7846_PENDOWN ); }
@@ -260,7 +259,9 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; +#endif +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846",
@@ -305,15 +306,19 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_register_device (&mxc_fb_device, &eukrea_mbimx27_fb_data);mxc_register_device (&mxc_sdhc_device0,NULL ); -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +#if defined(CONFIG_TOUCHSCREEN_ADS7846 ) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE ) -/* SPI and ADS7846 Touchscreen controler init */ -mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT ); +/* ADS7846 Touchscreen controller init */ mxc_gpio_mode (GPIO_PORTD |25 |GPIO_GPIO |GPIO_IN ); +ads7846_dev_init (); +#endif + +#if defined(CONFIG_SPI_IMX ) || defined(CONFIG_SPI_IMX_MODULE ) +/* SPI_CS0 init */ +mxc_gpio_mode (GPIO_PORTD |28 |GPIO_GPIO |GPIO_OUT );mxc_register_device (&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);spi_register_board_info (eukrea_mbimx27_spi_board_info,ARRAY_SIZE (eukrea_mbimx27_spi_board_info)); -ads7846_dev_init ();#endif /* Leds configuration */
Signature · 1 line
1.6.3.3
Sascha Hauer
maintainerPATCH 2/13 eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
In reply to Eric BénardHi Eric,
Quoted 32 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>--- arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 55 +++++++++++++++++++++++--- 1 files changed, 49 insertions(+), 6 deletions(-)arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +2
-6@@ -24,6 +24,8 @@#include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/backlight.h> +#include <video/platform_lcd.h> #include <asm/mach/arch.h> @@ -103,12 +105,6 @@ static struct gpio_led gpio_leds[] = { .active_low = 1, .gpio = GPIO_PORTF | 19, }, - { - .name = "backlight", - .default_trigger = "backlight", - .active_low = 0, - .gpio = GPIO_PORTE | 5, - }, }; static struct gpio_led_platform_data gpio_led_info = {
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { · line 158
Quoted 10 lines
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +7
-0@@ -153,6 +149,47 @@ static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { .dmacr = 0x00040060, }; +static void eukrea_mbimx27_bl_set_intensity (int intensity) +{ +if (intensity) +gpio_direction_output (GPIO_PORTE |5 ,1 ); +else +gpio_direction_output (GPIO_PORTE |5 ,0 ); +}
PE5 is connected to a PWM for which we have a driver in the tree. Don't you want to use it? As it happens my collegue just some code to make it usable on the pca100 board. I can send you the code if you want to.
Quoted 54 lines
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +40
-0+ +static struct generic_bl_info eukrea_mbimx27_bl_info = { + .name ="eukrea_mbimx27-bl" , + .max_intensity =0xff , + .default_intensity =0xff , + .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, +}; + +static struct platform_device eukrea_mbimx27_bl_dev = { + .name ="generic-bl" , + .id =1 , + .dev = { + .platform_data = &eukrea_mbimx27_bl_info, + }, +}; + +static void eukrea_mbimx27_lcd_power_set (struct plat_lcd_data *pd, +unsigned int power) +{ +if (power) +gpio_direction_output (GPIO_PORTA |25 ,1 ); +else +gpio_direction_output (GPIO_PORTA |25 ,0 ); +} + +static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { + .set_power = eukrea_mbimx27_lcd_power_set, +}; + +static struct platform_device eukrea_mbimx27_lcd_powerdev = { + .name ="platform-lcd" , + .dev.platform_data = &eukrea_mbimx27_lcd_power_data, +}; +static struct imxuart_platform_data uart_pdata[] = { { .flags =IMXUART_HAVE_RTSCTS ,@@ -244,6 +281,12 @@ void __init eukrea_mbimx27_baseboard_init(void)mxc_gpio_mode (GPIO_PORTF |19 |GPIO_GPIO |GPIO_OUT );/* Backlight */ mxc_gpio_mode (GPIO_PORTE |5 |GPIO_GPIO |GPIO_OUT ); +gpio_request (GPIO_PORTE |5 ,"backlight" ); +platform_device_register (&eukrea_mbimx27_bl_dev); +/* LCD Reset */ +mxc_gpio_mode (GPIO_PORTA |25 |GPIO_GPIO |GPIO_OUT ); +gpio_request (GPIO_PORTA |25 ,"lcd_enable" ); +platform_device_register (&eukrea_mbimx27_lcd_powerdev);platform_add_devices (platform_devices,ARRAY_SIZE (platform_devices)); }Signature · 1 line
1.6.3.3
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |