ALSA: usb-audio: add support for Akai MPD16
Subsystems (2)
PATCH 1/1 ALSA: usb-audio: add support for Akai MPD16
The decoding/encoding is based on own reverse-engineering. Both control and data ports are handled. Writing to control port supports SysEx events only, as this is the only type of messages that MPD16 recognizes.
Signed-off-by Krzysztof Foltman <[email protected]>
sound/usb/midi.c +110 -0
@@ -645,6 +645,105 @@ static struct usb_protocol_ops snd_usbmidi_cme_ops = { };/* +* AKAI MPD16 protocol: +* +* For control port (endpoint 1): +* ============================== +* One or more chunks consisting of first byte of (0x10 | msg_len) and then a +* SysEx message (msg_len=9 bytes long). +* +* For data port (endpoint 2): +* =========================== +* One or more chunks consisting of first byte of (0x20 | msg_len) and then a +* MIDI message (msg_len bytes long) +* +* Messages sent: Active Sense, Note On, Poly Pressure, Control Change. +*/ +static void snd_usbmidi_akai_input (struct snd_usb_midi_in_endpoint *ep, +uint8_t *buffer,int buffer_length) +{ +unsigned int pos =0 ; +unsigned int len = (unsigned int )buffer_length; +while (pos < len) { +unsigned int port = (buffer[pos] >>4 ) -1 ; +unsigned int msg_len = buffer[pos] &0x0f ; + pos++; +if (pos + msg_len <= len && port <2 ) +snd_usbmidi_input_data (ep,0 , &buffer[pos], msg_len); + pos += msg_len; + } +} + +#define MAX_AKAI_SYSEX_LEN 9 + +static void snd_usbmidi_akai_output (struct snd_usb_midi_out_endpoint *ep, +struct urb *urb) +{ +uint8_t *msg; +int pos, end, count, buf_end; +uint8_t tmp[MAX_AKAI_SYSEX_LEN ]; +struct snd_rawmidi_substream *substream = ep->ports[0 ].substream; + +if (!ep->ports[0 ].active) +return ; + + msg = urb->transfer_buffer + urb->transfer_buffer_length; + buf_end = ep->max_transfer -MAX_AKAI_SYSEX_LEN -1 ; + +/* only try adding more data when there's space for at least 1 SysEx */ +while (urb->transfer_buffer_length < buf_end) { + count =snd_rawmidi_transmit_peek (substream, + tmp,MAX_AKAI_SYSEX_LEN ); +if (!count) { + ep->ports[0 ].active =0 ; +return ; + } +/* try to skip non-SysEx data */ +for (pos =0 ; pos < count && tmp[pos] !=0xF0 ; pos++) + ; + +if (pos >0 ) { +snd_rawmidi_transmit_ack (substream, pos); +continue ; + } + +/* look for the start or end marker */ +for (end =1 ; end < count && tmp[end] <0xF0 ; end++) + ; + +/* next SysEx started before the end of current one */ +if (end < count && tmp[end] ==0xF0 ) { +/* it's incomplete - drop it */ +snd_rawmidi_transmit_ack (substream, end); +continue ; + } +/* SysEx complete */ +if (end < count && tmp[end] ==0xF7 ) { +/* queue it, ack it, and get the next one */ + count = end +1 ; + msg[0 ] =0x10 | count; +memcpy (&msg[1 ], tmp, count); +snd_rawmidi_transmit_ack (substream, count); + urb->transfer_buffer_length += count +1 ; + msg += count +1 ; +continue ; + } +/* less than 9 bytes and no end byte - wait for more */ +if (count <MAX_AKAI_SYSEX_LEN ) { + ep->ports[0 ].active =0 ; +return ; + } +/* 9 bytes and no end marker in sight - malformed, skip it */ +snd_rawmidi_transmit_ack (substream, count); + } +} + +static struct usb_protocol_ops snd_usbmidi_akai_ops = { + .input = snd_usbmidi_akai_input, + .output = snd_usbmidi_akai_output, +}; + +/* * Novation USB MIDI protocol: number of data bytes is in the first byte * (when receiving) (+1!) or in the second byte (when sending); data begins * at the third byte.
@@ -1434,6 +1533,11 @@ static struct port_info {EXTERNAL_PORT (0x086a ,0x0001 ,8 ,"%s Broadcast" ),EXTERNAL_PORT (0x086a ,0x0002 ,8 ,"%s Broadcast" ),EXTERNAL_PORT (0x086a ,0x0003 ,4 ,"%s Broadcast" ), +/* Akai MPD16 */ +CONTROL_PORT (0x09e8 ,0x0062 ,0 ,"%s Control" ), +PORT_INFO (0x09e8 ,0x0062 ,1 ,"%s MIDI" ,0 , +SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | +SNDRV_SEQ_PORT_TYPE_HARDWARE ),/* Access Music Virus TI */ EXTERNAL_PORT (0x133e ,0x0815 ,0 ,"%s MIDI" ), PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
@@ -2035,6 +2139,12 @@ int snd_usbmidi_create(struct snd_card *card, umidi->usb_protocol_ops = &snd_usbmidi_cme_ops; err =snd_usbmidi_detect_per_port_endpoints (umidi, endpoints);break ; +case QUIRK_MIDI_AKAI : + umidi->usb_protocol_ops = &snd_usbmidi_akai_ops; + err =snd_usbmidi_detect_per_port_endpoints (umidi, endpoints); +/* endpoint 1 is input-only */ + endpoints[1 ].out_cables =0 ; +break ;default :snd_printd (KERN_ERR "invalid quirk type %d\n" , quirk->type); err = -ENXIO ;
sound/usb/midi.h +2 -0
@@ -37,6 +37,8 @@ struct snd_usb_midi_endpoint_info {/* for QUIRK_MIDI_CME, data is NULL */ +/* for QUIRK_MIDI_AKAI, data is NULL */ + int snd_usbmidi_create(struct snd_card *card, struct usb_interface *iface, struct list_head *midi_list,
sound/usb/quirks-table.h +11 -0
@@ -1973,6 +1973,17 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* AKAI devices */ +{ + USB_DEVICE(0x09e8, 0x0062), + .driver_info = (unsigned long ) & (const struct snd_usb_audio_quirk ) { + .vendor_name ="AKAI" , + .product_name ="MPD16" , + .ifnum =0 , + .type =QUIRK_MIDI_AKAI , + } +}, +/* TerraTec devices */ { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012),
sound/usb/quirks.c +1 -0
@@ -289,6 +289,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_MIDI_FASTLANE] = create_any_midi_quirk, [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, [QUIRK_MIDI_CME] = create_any_midi_quirk, + [QUIRK_MIDI_AKAI] = create_any_midi_quirk, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
sound/usb/usbaudio.h +1 -0
@@ -74,6 +74,7 @@ enum quirk_type {QUIRK_MIDI_FASTLANE ,QUIRK_MIDI_EMAGIC ,QUIRK_MIDI_CME , +QUIRK_MIDI_AKAI ,QUIRK_MIDI_US122L ,QUIRK_AUDIO_STANDARD_INTERFACE , QUIRK_AUDIO_FIXED_ENDPOINT,
Signature · 1 line
1.7.0.4