Skip to contentSkip to conversation

leds-gpio: Change blink_set callback to be able to turn off blinking

PATCH In review Benjamin Herrenschmidt 2 participants 5 messages May 22, 2010 – May 26, 2010

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 5/5 leds-gpio: Change blink_set callback to be able to turn off blinking

The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one.

The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value.

However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation.

This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far.

---
 arch/arm/mach-orion5x/dns323-setup.c |   23 +++++++++++++----------
 drivers/leds/leds-gpio.c             |   31 ++++++++++++++++++++++++-------
 include/linux/leds.h                 |   12 ++++++++----
 3 files changed, 45 insertions(+), 21 deletions(-)
arch/arm/mach-orion5x/dns323-setup.c +13 -10
index a9fa774..2ab073d 100644
@@ -255,22 +255,23 @@ error_fail:
 
 #define ORION_BLINK_HALF_PERIOD 100 /* ms */
 
-static int dns323_gpio_blink_set(unsigned gpio,
+static int dns323_gpio_blink_set(unsigned gpio, int state,
 	unsigned long *delay_on, unsigned long *delay_off)
 {
-	static int value = 0;
 
-	if (!*delay_on && !*delay_off)
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
 		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
 
-	if (ORION_BLINK_HALF_PERIOD == *delay_on
-	    && ORION_BLINK_HALF_PERIOD == *delay_off) {
-		value = !value;
-		orion_gpio_set_blink(gpio, value);
-		return 0;
+	switch(state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		orion_gpio_set_blink(gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		orion_gpio_set_blink(gpio, 1);
 	}
-
-	return -EINVAL;
+	return 0;
 }
 
 static struct gpio_led dns323ab_leds[] = {
@@ -278,6 +279,7 @@ static struct gpio_led dns323ab_leds[] = {
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
 		.default_trigger = "timer",
+		.active_low = 1,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -295,6 +297,7 @@ static struct gpio_led dns323c_leds[] = {
 		.name = "power:blue",
 		.gpio = DNS323C_GPIO_LED_POWER,
 		.default_trigger = "timer",
+		.active_low = 1,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
drivers/leds/leds-gpio.c +24 -7
index c6e4b77..8f8c581 100644
@@ -26,7 +26,8 @@ struct gpio_led_data {
 	u8 new_level;
 	u8 can_sleep;
 	u8 active_low;
-	int (*platform_gpio_blink_set)(unsigned gpio,
+	u8 blinking;
+	int (*platform_gpio_blink_set)(unsigned gpio, int state,
 			unsigned long *delay_on, unsigned long *delay_off);
 };
 
@@ -35,7 +36,13 @@ static void gpio_led_work(struct work_struct *work)
 	struct gpio_led_data	*led_dat =
 		container_of(work, struct gpio_led_data, work);
 
-	gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
+	if (led_dat->blinking) {
+		led_dat->platform_gpio_blink_set(led_dat->gpio,
+						 led_dat->new_level,
+						 NULL, NULL);
+		led_dat->blinking = 0;
+	} else
+		gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
 }
 
 static void gpio_led_set(struct led_classdev *led_cdev,
@@ -60,8 +67,14 @@ static void gpio_led_set(struct led_classdev *led_cdev,
 	if (led_dat->can_sleep) {
 		led_dat->new_level = level;
 		schedule_work(&led_dat->work);
-	} else
-		gpio_set_value(led_dat->gpio, level);
+	} else {
+		if (led_dat->blinking) {
+			led_dat->platform_gpio_blink_set(led_dat->gpio, level,
+							 NULL, NULL);
+			led_dat->blinking = 0;
+		} else
+			gpio_set_value(led_dat->gpio, level);
+	}
 }
 
 static int gpio_blink_set(struct led_classdev *led_cdev,
@@ -70,12 +83,14 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
 	struct gpio_led_data *led_dat =
 		container_of(led_cdev, struct gpio_led_data, cdev);
 
-	return led_dat->platform_gpio_blink_set(led_dat->gpio, delay_on, delay_off);
+	led_dat->blinking = 1;
+	return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
+						delay_on, delay_off);
 }
 
 static int __devinit create_gpio_led(const struct gpio_led *template,
 	struct gpio_led_data *led_dat, struct device *parent,
-	int (*blink_set)(unsigned, unsigned long *, unsigned long *))
+	int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
 {
 	int ret, state;
 
@@ -97,6 +112,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
 	led_dat->gpio = template->gpio;
 	led_dat->can_sleep = gpio_cansleep(template->gpio);
 	led_dat->active_low = template->active_low;
+	led_dat->blinking = 0;
 	if (blink_set) {
 		led_dat->platform_gpio_blink_set = blink_set;
 		led_dat->cdev.blink_set = gpio_blink_set;
@@ -113,7 +129,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
 	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
 	if (ret < 0)
 		goto err;
-
+		
 	INIT_WORK(&led_dat->work, gpio_led_work);
 
 	ret = led_classdev_register(parent, &led_dat->cdev);
@@ -234,6 +250,7 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 		led.gpio = of_get_gpio_flags(child, 0, &flags);
 		led.active_low = flags & OF_GPIO_ACTIVE_LOW;
 		led.name = of_get_property(child, "label", NULL) ? : child->name;
+		led.blinking = 0;
 		led.default_trigger =
 			of_get_property(child, "linux,default-trigger", NULL);
 		state = of_get_property(child, "default-state", NULL);
include/linux/leds.h +8 -4
index d8bf966..ba6986a 100644
@@ -149,14 +149,18 @@ struct gpio_led {
 	unsigned	default_state : 2;
 	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
 };
-#define LEDS_GPIO_DEFSTATE_OFF	0
-#define LEDS_GPIO_DEFSTATE_ON	1
-#define LEDS_GPIO_DEFSTATE_KEEP	2
+#define LEDS_GPIO_DEFSTATE_OFF		0
+#define LEDS_GPIO_DEFSTATE_ON		1
+#define LEDS_GPIO_DEFSTATE_KEEP		2
 
 struct gpio_led_platform_data {
 	int 		num_leds;
 	struct gpio_led *leds;
-	int		(*gpio_blink_set)(unsigned gpio,
+
+#define GPIO_LED_NO_BLINK_LOW	0	/* No blink GPIO state low */
+#define GPIO_LED_NO_BLINK_HIGH	1	/* No blink GPIO state high */
+#define GPIO_LED_BLINK		2	/* Plase, blink */
+	int		(*gpio_blink_set)(unsigned gpio, int state,
 					unsigned long *delay_on,
 					unsigned long *delay_off);
 };
#1 lore raw

PATCH 5/5 leds-gpio: Change blink_set callback to be able to turn off blinking

Quoted 14 lines · Benjamin Herrenschmidt

The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one.

The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value.

However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation.

This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far.

Quoted 8 lines
---
 arch/arm/mach-orion5x/dns323-setup.c |   23 +++++++++++++----------
 drivers/leds/leds-gpio.c             |   31 ++++++++++++++++++++++++-------
 include/linux/leds.h                 |   12 ++++++++----
 3 files changed, 45 insertions(+), 21 deletions(-)

Queued in the leds tree, thanks.

Richard

#2 lore raw

PATCH 5/5 leds-gpio: Change blink_set callback to be able to turn off blinking

Quoted 24 lines · Richard Purdie
Quoted 14 lines · Benjamin Herrenschmidt

The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one.

The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value.

However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation.

This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far.

Quoted 8 lines
---
 arch/arm/mach-orion5x/dns323-setup.c |   23 +++++++++++++----------
 drivers/leds/leds-gpio.c             |   31 ++++++++++++++++++++++++-------
 include/linux/leds.h                 |   12 ++++++++----
 3 files changed, 45 insertions(+), 21 deletions(-)
Quoted 1 line

Queued in the leds tree, thanks.

You may need to fixup the dns323 bit if you apply before my dns323 rev C patches ... but I suppose you figured that out already ;-) It should be minor.

Cheers,
Ben.

#3 lore raw

PATCH 5/5 leds-gpio: Change blink_set callback to be able to turn off blinking

Quoted 25 lines · Benjamin Herrenschmidt
Quoted 24 lines · Richard Purdie
Quoted 22 lines · Benjamin Herrenschmidt

The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one.

The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value.

However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation.

This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far.

---
 arch/arm/mach-orion5x/dns323-setup.c |   23 +++++++++++++----------
 drivers/leds/leds-gpio.c             |   31 ++++++++++++++++++++++++-------
 include/linux/leds.h                 |   12 ++++++++----
 3 files changed, 45 insertions(+), 21 deletions(-)
Quoted 5 lines
Quoted 1 line

Queued in the leds tree, thanks.

You may need to fixup the dns323 bit if you apply before my dns323 rev C patches ... but I suppose you figured that out already ;-) It should be minor.

Yes, I noticed just after I hit send and applied. I'd rather get the core change in sooner than later and the reject doesn't look serious so I'm assuming you can fix up the missing active_low bit for the new addition easily enough?

Cheers,

Richard

#4 lore raw

PATCH 5/5 leds-gpio: Change blink_set callback to be able to turn off blinking

Quoted 5 lines · Richard Purdie

Yes, I noticed just after I hit send and applied. I'd rather get the core change in sooner than later and the reject doesn't look serious so
I'm assuming you can fix up the missing active_low bit for the new addition easily enough?

Yup. No big deal.

Cheers,
Ben.