Samsung documentation updates
Subsystems (4)
Some documentation updates for post v2.6.34 merge
PATCH 1/8 ARM: SAMSUNG: Documentation: update the list of SoCs supported
Update the list of SoCs supported for the plat-s5p range.
--- Documentation/arm/Samsung/Overview.txt | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-)
Documentation/arm/Samsung/Overview.txt +7 -3
@@ -13,9 +13,10 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - - S5PC6440 - - S5PC100 and S5PC110 support is currently being merged + - S5P6440 + - S5P6442 + - S5PC100 + - S5PC110 / S5PV210 S3C24XX Systems
@@ -35,7 +36,10 @@ Configuration unifying all the SoCs into one kernel. s5p6440_defconfig - S5P6440 specific default configuration + s5p6442_defconfig - S5P6442 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration + s5pc110_defconfig - S5PC110 specific default configuration + s5pv210_defconfig - S5PV210 specific default configuration Layout
Signature · 1 line
1.6.3.3
PATCH 2/8 ARM: SAMSUNG: Documentation: update directory layout
In reply to Ben DooksUpdate the directory layout in Documentation/arm/Samsung/Overview.txt to reflect the changes that have been made in the latest kernel updates.
--- Documentation/arm/Samsung/Overview.txt | 23 ++++++++++++++++------- 1 files changed, 16 insertions(+), 7 deletions(-)
Documentation/arm/Samsung/Overview.txt +16 -7
@@ -54,18 +54,27 @@ Layout specific information. It contains the base clock, GPIO and device definitions to get the system running. - plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently - involved in other builds this will be phased out once the relevant code is - moved elsewhere. - plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. - plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs. + plat-s5p is for s5p specific builds, and contains common support for the + S5P specific systems. Not all S5Ps use all the features in this directory + due to differences in the hardware. + + +Layout changes +-------------- + + The old plat-s3c and plat-s5pc1xx directories have been removed, with + support moved to either plat-samsung or plat-s5p as necessary. These moves + where to simplify the include and dependency issues involved with having + so many different platform directories. - plat-s5p is for s5p specific builds, more to be added. + It was decided to remove plat-s5pc1xx as some of the support was already + in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210 + the only user was the S5PC100. The S5PC100 specific items where moved to + arch/arm/mach-s5pc100. - [ to finish ] Port Contributors
Signature · 1 line
1.6.3.3
PATCH 3/8 ARM: S3C24XX: Documentation: update documentation overview
In reply to Ben DooksAdd the two new SoCs added in this release cycle and update the notes on the gpiolib conversion.
--- Documentation/arm/Samsung-S3C24XX/Overview.txt | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-)
Documentation/arm/Samsung-S3C24XX/Overview.txt +10 -1
@@ -8,10 +8,16 @@ Introduction The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, - S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported. + S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices + are supported. Support for the S3C2400 and S3C24A0 series are in progress. + The S3C2416 and S3C2450 devices are very similar and S3C2450 support is + included under the arch/arm/mach-s3c2416 directory. Note, whilst core + support for these SoCs is in, work on some of the extra peripherals + and extra interrupts is still ongoing. + Configuration -------------
@@ -209,6 +215,9 @@ GPIO Newer kernels carry GPIOLIB, and support is being moved towards this with some of the older support in line to be removed. + As of v2.6.34, the move towards using gpiolib support is almost + complete, and very little of the old calls are left. + Clock Management ----------------
Signature · 1 line
1.6.3.3
PATCH 4/8 ARM: S3C24XX: Documentation: update GPIO documentation
In reply to Ben DooksUpate the S3C24XX GPIO documentation after the changes for gpiolib and show which calls are being replaced by gpiolib or the new s3c generic calls.
--- Documentation/arm/Samsung-S3C24XX/GPIO.txt | 35 ++++++++++++++++++++++++++- 1 files changed, 33 insertions(+), 2 deletions(-)
Documentation/arm/Samsung-S3C24XX/GPIO.txt +33 -2
@@ -24,8 +24,16 @@ GPIOLIB listed below will be removed (they may be marked as __deprecated in the near future). - - s3c2410_gpio_getpin - - s3c2410_gpio_setpin + The following functions now either have a s3c_ specific variant + or are merged into gpiolib. See the definitions in + arch/arm/plat-samsung/include/plat/gpio-cfg.h: + + s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output() + s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input() + s3c2410_gpio_getirq() gpio_to_irq() + s3c2410_gpio_cfgpin() s3c_gpio_cfgpin() + s3c2410_gpio_getcfg() s3c_gpio_getcfg() + s3c2410_gpio_pullup() s3c_gpio_setpull() Headers
@@ -54,6 +62,11 @@ PIN Numbers eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell the GPIO functions which pin is to be used. + With the conversion to gpiolib, there is no longer a direct conversion + from gpio pin number to register base address as in earlier kernels. This + is due to the number space required for newer SoCs where the later + GPIOs are not contiguous. + Configuring a pin -----------------
@@ -71,6 +84,8 @@ Configuring a pin which would turn GPA(0) into the lowest Address line A0, and set GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. + The s3c_gpio_cfgpin() call is a functional replacement for this call. + Reading the current configuration ---------------------------------
@@ -82,6 +97,9 @@ Reading the current configuration The return value will be from the same set of values which can be passed to s3c2410_gpio_cfgpin(). + The s3c_gpio_getcfg() call should be a functional replacement for + this call. + Configuring a pull-up resistor ------------------------------
@@ -95,6 +113,10 @@ Configuring a pull-up resistor Where the to value is zero to set the pull-up off, and 1 to enable the specified pull-up. Any other values are currently undefined. + The s3c_gpio_setpull() offers similar functionality, but with the + ability to encode whether the pull is up or down. Currently there + is no 'just on' state, so up or down must be selected. + Getting the state of a PIN --------------------------
@@ -106,6 +128,9 @@ Getting the state of a PIN This will return either zero or non-zero. Do not count on this function returning 1 if the pin is set. + This call is now implemented by the relevant gpiolib calls, convert + your board or driver to use gpiolib. + Setting the state of a PIN --------------------------
@@ -117,6 +142,9 @@ Setting the state of a PIN Which sets the given pin to the value. Use 0 to write 0, and 1 to set the output to 1. + This call is now implemented by the relevant gpiolib calls, convert + your board or driver to use gpiolib. + Getting the IRQ number associated with a PIN --------------------------------------------
@@ -128,6 +156,9 @@ Getting the IRQ number associated with a PIN Note, not all pins have an IRQ. + This call is now implemented by the relevant gpiolib calls, convert + your board or driver to use gpiolib. + Authour -------
Signature · 1 line
1.6.3.3
PATCH 5/8 ARM: S3C24XX: Documentation: add section on gpiolib changes
In reply to Ben DooksAdd section to the S3C24XX GPIO documentation on the recent changes to move towards gpiolib integration.
--- Documentation/arm/Samsung-S3C24XX/GPIO.txt | 44 ++++++++++++++++++++++++++++ 1 files changed, 44 insertions(+), 0 deletions(-)
Documentation/arm/Samsung-S3C24XX/GPIO.txt +44 -0
@@ -36,6 +36,50 @@ GPIOLIB s3c2410_gpio_pullup() s3c_gpio_setpull() +GPIOLIB conversion +------------------ + +If you need to convert your board or driver to use gpiolib from the exiting +s3c2410 api, then here are some notes on the process. + +1) If your board is exclusively using an GPIO, say to control peripheral + power, then it will require to claim the gpio with gpio_request() before + it can use it. + + It is recommended to check the return value, with at least WARN_ON() + during initialisation. + +2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin() + as they have the same arguments, and can either take the pin specific + values, or the more generic special-function-number arguments. + +3) s3c2410_gpio_pullup() changs have the problem that whilst the + s3c2410_gpio_pullup(x, 1) can be easily translated to the + s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) + are not so easy. + + The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case + of some of the devices, a pull-down) and as such the new API distinguishes + between the UP and DOWN case. There is currently no 'just turn on' setting + which may be required if this becomes a problem. + +4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call + does not implicitly configure the relevant gpio to output. The gpio + direction should be changed before using gpio_set_value(). + +5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin + has been set to input. It is currently unknown what the behaviour is + when using gpio_get_value() on an output pin (s3c2410_gpio_getpin + would return the value the pin is supposed to be outputting). + +6) s3c2410_gpio_getirq() should be directly replacable with the + gpio_to_irq() call. + +The s3c2410_gpio and gpio_ calls have always operated on the same gpio +numberspace, so there is no problem with converting the gpio numbering +between the calls. + + Headers -------
Signature · 1 line
1.6.3.3
PATCH 6/8 ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
In reply to Ben DooksFix typo in s3c_gpio_cfgpin() documentation, the second argument is @to not @pin again.
--- arch/arm/plat-samsung/include/plat/gpio-cfg.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/plat-samsung/include/plat/gpio-cfg.h +1 -1
@@ -70,7 +70,7 @@ struct s3c_gpio_cfg {/** * s3c_gpio_cfgpin() - Change the GPIO function of a pin. * @pin pin The pin number to configure. -* @pin to The configuration for the pin's function. +* @to to The configuration for the pin's function. * * Configure which function is actually connected to the external * pin, such as an gpio input, output or some form of special function
Signature · 1 line
1.6.3.3
PATCH 7/8 ARM: SAMSUNG: Documentation: add documentation on GPIO code
In reply to Ben DooksAdd some documentation in Documentation/arm/Samsung for the GPIO code and where to look for the necessary functions. Update the S3C24XX case as well.
--- Documentation/arm/Samsung-S3C24XX/GPIO.txt | 2 + Documentation/arm/Samsung-S3C24XX/Overview.txt | 4 ++ Documentation/arm/Samsung/GPIO.txt | 42 ++++++++++++++++++++++++ 3 files changed, 48 insertions(+), 0 deletions(-) create mode 100644 Documentation/arm/Samsung/GPIO.txt
Documentation/arm/Samsung-S3C24XX/GPIO.txt +2 -0
@@ -12,6 +12,8 @@ Introduction of the s3c2410 GPIO system, please read the Samsung provided data-sheet/users manual to find out the complete list. + See Documentation/arm/Samsung/GPIO.txt for the core implemetation. + GPIOLIB -------
Documentation/arm/Samsung-S3C24XX/Overview.txt +4 -0
@@ -218,6 +218,10 @@ GPIO As of v2.6.34, the move towards using gpiolib support is almost complete, and very little of the old calls are left. + See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific + support and Documentation/arm/Samsung/GPIO.txt for the core Samsung + implementation. + Clock Management ----------------
Documentation/arm/Samsung/GPIO.txt new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH 8/8 ARM: SAMSUNG: gpio-cfg.h: update documentation
In reply to Ben DooksUpdate the documentation on the gpio configuration calls to add more references to useful information and also to document the values that are passed.
--- arch/arm/plat-samsung/include/plat/gpio-cfg.h | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
arch/arm/plat-samsung/include/plat/gpio-cfg.h +21 -0
@@ -43,6 +43,11 @@ struct s3c_gpio_chip;* layouts. Provide an point to vector control routine and provide any * per-bank configuration information that other systems such as the * external interrupt code will need. +* +* @sa s3c_gpio_cfgpin +* @sa s3c_gpio_getcfg +* @sa s3c_gpio_setpull +* @sa s3c_gpio_getpull */ struct s3c_gpio_cfg {unsigned int cfg_eint;
@@ -75,6 +80,20 @@ struct s3c_gpio_cfg {* Configure which function is actually connected to the external * pin, such as an gpio input, output or some form of special function * connected to an internal peripheral block. +* +* The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT +* or S3C_GPIO_SFN() to indicate one of the possible values that the helper +* will then generate the correct bit mask and shift for the configuration. +* +* If a bank of GPIOs all needs to be set to special-function 2, then +* the following code will work: +* +* for (gpio = start; gpio < end; gpio++) +* s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); +* +* The @to parameter can also be a specific value already shifted to the +* correct position in the control register, although these are discouraged +* in newer kernels and are only being kept for compatibility. */ extern int s3c_gpio_cfgpin (unsigned int pin,unsigned int to);
@@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin);* This function sets the state of the pull-{up,down} resistor for the * specified pin. It will return 0 if successfull, or a negative error * code if the pin cannot support the requested pull setting. +* +* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ extern int s3c_gpio_setpull (unsigned int pin,s3c_gpio_pull_t pull);
Signature · 1 line
1.6.3.3