Add support for Eukrea's CPUIMX25
Subsystems (4)
PATCH 1/2 Add support for Eukrea's CPUIMX25
From: Eric Benard <[email protected]>
This boards integrates 64mB of DDR, a 256MB NAND flash, a RMII Ethernet PHY and a i.MX257 CPU.
Signed-off-by Eric Bénard <[email protected]>
--- arch/arm/Makefile | 1 + arch/arm/configs/eukrea_cpuimx25_defconfig | 247 ++++++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 10 + board/eukrea_cpuimx25/Makefile | 24 +++ board/eukrea_cpuimx25/config.h | 27 +++ board/eukrea_cpuimx25/env/bin/_update | 36 ++++ board/eukrea_cpuimx25/env/bin/boot | 53 +++++ board/eukrea_cpuimx25/env/bin/hush_hack | 1 + board/eukrea_cpuimx25/env/bin/init | 38 ++++ board/eukrea_cpuimx25/env/bin/update_kernel | 8 + board/eukrea_cpuimx25/env/bin/update_root | 8 + board/eukrea_cpuimx25/env/config | 26 +++ board/eukrea_cpuimx25/eukrea_cpuimx25.c | 275 +++++++++++++++++++++++++++ board/eukrea_cpuimx25/lowlevel.c | 130 +++++++++++++ 14 files changed, 884 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig create mode 100644 board/eukrea_cpuimx25/Makefile create mode 100644 board/eukrea_cpuimx25/config.h create mode 100644 board/eukrea_cpuimx25/env/bin/_update create mode 100644 board/eukrea_cpuimx25/env/bin/boot create mode 100644 board/eukrea_cpuimx25/env/bin/hush_hack create mode 100644 board/eukrea_cpuimx25/env/bin/init create mode 100644 board/eukrea_cpuimx25/env/bin/update_kernel create mode 100644 board/eukrea_cpuimx25/env/bin/update_root create mode 100644 board/eukrea_cpuimx25/env/config create mode 100644 board/eukrea_cpuimx25/eukrea_cpuimx25.c create mode 100644 board/eukrea_cpuimx25/lowlevel.c
arch/arm/Makefile +1 -0
@@ -61,6 +61,7 @@ board-$(CONFIG_MACH_EDB9307A) := edb93xx board-$(CONFIG_MACH_EDB93012) := edb93xx board-$(CONFIG_MACH_EDB9315) := edb93xx board-$(CONFIG_MACH_EDB9315A) := edb93xx +board-$(CONFIG_MACH_EUKREA_CPUIMX25) := eukrea_cpuimx25 board-$(CONFIG_MACH_EUKREA_CPUIMX27) := eukrea_cpuimx27 board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
arch/arm/configs/eukrea_cpuimx25_defconfig new file +247 -0
247 lines not on this page · raw message
arch/arm/mach-imx/Kconfig +10 -0
@@ -2,6 +2,7 @@ if ARCH_IMX config ARCH_TEXT_BASE hex + default 0x83f00000 if MACH_EUKREA_CPUIMX25 default 0xa0000000 if MACH_EUKREA_CPUIMX27 default 0x08f00000 if MACH_MX1ADS default 0xc0000000 if MACH_IMX21ADS
@@ -16,6 +17,7 @@ config ARCH_TEXT_BASE default 0x08f80000 if MACH_SCB9328 config BOARDINFO + default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25 default "Eukrea CPUIMX27" if MACH_EUKREA_CPUIMX27 default "Freescale i.MX21 ADS" if MACH_IMX21ADS default "Freescale i.MX27 ADS" if MACH_IMX27ADS
@@ -124,6 +126,14 @@ choice prompt "i.MX25 Board Type" +config MACH_EUKREA_CPUIMX25 + bool "Eukrea CPUIMX25" + select MACH_HAS_LOWLEVEL_INIT + select HAVE_MMU + help + Say Y here if you are using the Eukrea Electromatique's CPUIMX25 + equipped with a Freescale i.MX25 Processor + config MACH_FREESCALE_MX25_3STACK bool "Freescale MX25 3stack" select HAS_CFI
board/eukrea_cpuimx25/Makefile new file +24 -0
@@ -0,0 +1,24 @@ +# +# (C) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +obj-y += lowlevel.o +obj-y += eukrea_cpuimx25.o
board/eukrea_cpuimx25/config.h new file +27 -0
@@ -0,0 +1,27 @@ +/* +* (c) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX25_HCLK_FREQ 24000000 + +#endif + +/* nothing to do here yet */
board/eukrea_cpuimx25/env/bin/_update new file +36 -0
@@ -0,0 +1,36 @@ +#!/bin/sh + +if [ -z "$part" -o -z "$image" ]; then + echo "define \$part and \$image" + exit 1 +fi + +if [ ! -e "$part" ]; then + echo "Partition $part does not exist" + exit 1 +fi + +if [ $# = 1 ]; then + image=$1 +fi + +if [ x$ip = xdhcp ]; then + dhcp +fi + +ping $eth0.serverip +if [ $? -ne 0 ] ; then + echo "update aborted" + exit 1 +fi + +unprotect $part + +echo +echo "erasing partition $part" +erase $part + +echo +echo "flashing $image to $part" +echo +tftp $image $part
board/eukrea_cpuimx25/env/bin/boot new file +53 -0
53 lines not on this page · raw message
board/eukrea_cpuimx25/env/bin/hush_hack new file +1 -0
@@ -0,0 +1 @@ +nand -a /dev/nand0.*
board/eukrea_cpuimx25/env/bin/init new file +38 -0
@@ -0,0 +1,38 @@ +#!/bin/sh + +PATH=/env/bin +export PATH + +. /env/config +if [ -e /dev/nand0 ]; then + addpart /dev/nand0 $nand_parts + + # Uh, oh, hush first expands wildcards and then starts executing + # commands. What a bug! + source /env/bin/hush_hack +fi + +if [ -f /env/logo.bmp ]; then + bmp /env/logo.bmp +fi + +if [ -z $eth0.ethaddr ]; then + while [ -z $eth0.ethaddr ]; do + readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr + done + echo -a /env/config "eth0.ethaddr=$eth0.ethaddr" + saveenv +fi + +echo +echo -n "Hit any key to stop autoboot: " +timeout -a $autoboot_timeout +if [ $? != 0 ]; then + echo + echo "type update_kernel [<imagename>] to update kernel into flash" + echo "type update_root [<imagename>] to update rootfs into flash" + echo + exit +fi + +boot
board/eukrea_cpuimx25/env/bin/update_kernel new file +8 -0
@@ -0,0 +1,8 @@ +#!/bin/sh + +. /env/config + +image=$uimage +part=/dev/nand0.kernel.bb + +. /env/bin/_update $1
board/eukrea_cpuimx25/env/bin/update_root new file +8 -0
@@ -0,0 +1,8 @@ +#!/bin/sh + +. /env/config + +image=$rootfs +part=/dev/nand0.root.bb + +. /env/bin/_update $1
board/eukrea_cpuimx25/env/config new file +26 -0
@@ -0,0 +1,26 @@ +#!/bin/sh + +# can be either 'net' or 'jffs2' or 'ubifs' +kernel=nand +root=jffs2 + +basedir=cpuimx25 +uimage=$basedir/uImage +rootfs=$basedir/rootfs + +autoboot_timeout=1 + +nfsroot="" +bootargs="console=ttymxc0,115200" + +nand_parts="256k(barebox)ro,128k(bareboxenv),2176k(kernel),-(root)" +rootpartnum_nand=3 + +# use 'dhcp' to do dhcp in barebox and in kernel +ip=dhcp + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.gateway=a.b.c.d +eth0.serverip=192.168.1.15
board/eukrea_cpuimx25/eukrea_cpuimx25.c new file +275 -0
275 lines not on this page · raw message
board/eukrea_cpuimx25/lowlevel.c new file +130 -0
130 lines not on this page · raw message
Signature · 7 lines
1.6.3.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/2 pcm043: fix wrong test
* actually the condition will never be met
Signed-off-by Eric Bénard <[email protected]>
--- board/pcm043/lowlevel.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
board/pcm043/lowlevel.c +1 -1
@@ -194,7 +194,7 @@ void __bare_init __naked board_init_lowlevel(void)#ifdef CONFIG_NAND_IMX_BOOT /* skip NAND boot if not running from NFC space */ r =get_pc (); -if (r <IMX_NFC_BASE && r >IMX_NFC_BASE +0x800 ) +if (r <IMX_NFC_BASE || r >IMX_NFC_BASE +0x800 )board_init_lowlevel_return (); src = (unsigned int *)IMX_NFC_BASE ;
Signature · 7 lines
1.6.3.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
maintainerQuoted 4 lines · Eric Bénard
From: Eric Benard <[email protected]>
This boards integrates 64mB of DDR, a 256MB NAND flash, a RMII Ethernet PHY and a i.MX257 CPU.
Ok, applied to -next.
Sascha
Quoted 1,027 lines
Signed-off-by Eric Bénard <[email protected]>--- arch/arm/Makefile | 1 + arch/arm/configs/eukrea_cpuimx25_defconfig | 247 ++++++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 10 + board/eukrea_cpuimx25/Makefile | 24 +++ board/eukrea_cpuimx25/config.h | 27 +++ board/eukrea_cpuimx25/env/bin/_update | 36 ++++ board/eukrea_cpuimx25/env/bin/boot | 53 +++++ board/eukrea_cpuimx25/env/bin/hush_hack | 1 + board/eukrea_cpuimx25/env/bin/init | 38 ++++ board/eukrea_cpuimx25/env/bin/update_kernel | 8 + board/eukrea_cpuimx25/env/bin/update_root | 8 + board/eukrea_cpuimx25/env/config | 26 +++ board/eukrea_cpuimx25/eukrea_cpuimx25.c | 275 +++++++++++++++++++++++++++ board/eukrea_cpuimx25/lowlevel.c | 130 +++++++++++++ 14 files changed, 884 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig create mode 100644 board/eukrea_cpuimx25/Makefile create mode 100644 board/eukrea_cpuimx25/config.h create mode 100644 board/eukrea_cpuimx25/env/bin/_update create mode 100644 board/eukrea_cpuimx25/env/bin/boot create mode 100644 board/eukrea_cpuimx25/env/bin/hush_hack create mode 100644 board/eukrea_cpuimx25/env/bin/init create mode 100644 board/eukrea_cpuimx25/env/bin/update_kernel create mode 100644 board/eukrea_cpuimx25/env/bin/update_root create mode 100644 board/eukrea_cpuimx25/env/config create mode 100644 board/eukrea_cpuimx25/eukrea_cpuimx25.c create mode 100644 board/eukrea_cpuimx25/lowlevel.carch/arm/Makefile +1
-0@@ -61,6 +61,7 @@ board-$(CONFIG_MACH_EDB9307A) := edb93xx board-$(CONFIG_MACH_EDB93012) := edb93xx board-$(CONFIG_MACH_EDB9315) := edb93xx board-$(CONFIG_MACH_EDB9315A) := edb93xx +board-$(CONFIG_MACH_EUKREA_CPUIMX25) := eukrea_cpuimx25 board-$(CONFIG_MACH_EUKREA_CPUIMX27) := eukrea_cpuimx27 board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stackarch/arm/configs/eukrea_cpuimx25_defconfig new file +247
-0@@ -0,0 +1,247 @@ +# +# Automatically generated make config: don't edit +# barebox version: 2010.03.0 +# Fri Mar 19 11:12:11 2010 +# +# CONFIG_BOARD_LINKER_SCRIPT is not set +CONFIG_GENERIC_LINKER_SCRIPT=y +CONFIG_ARM=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_EP93XX is not set +CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x83f00000 +CONFIG_BOARDINFO="Eukrea CPUIMX25" +CONFIG_ARCH_HAS_FEC_IMX=y +CONFIG_ARCH_IMX_INTERNAL_BOOT=y + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +CONFIG_ARCH_IMX25=y +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +CONFIG_MACH_EUKREA_CPUIMX25=y +# CONFIG_MACH_FREESCALE_MX25_3STACK is not set + +# +# Board specific settings +# + +# +# i.MX specific settings +# +# CONFIG_IMX_CLKO is not set +# CONFIG_AEABI is not set + +# +# Arm specific settings +# +CONFIG_CMD_ARM_CPUINFO=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_GREGORIAN_CALENDER=y +CONFIG_HAS_KALLSYMS=y +CONFIG_HAS_MODULES=y +CONFIG_CMD_MEMORY=y +CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y + +# +# General Settings +# +CONFIG_LOCALVERSION_AUTO=y + +# +# memory layout +# +CONFIG_HAVE_MMU=y +CONFIG_MMU=y +CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y +CONFIG_TEXT_BASE=0x83f00000 +CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y +CONFIG_MEMORY_LAYOUT_DEFAULT=y +# CONFIG_MEMORY_LAYOUT_FIXED is not set +CONFIG_STACK_SIZE=0x8000 +CONFIG_MALLOC_SIZE=0x1000000 +# CONFIG_BROKEN is not set +# CONFIG_EXPERIMENTAL is not set +CONFIG_MACH_HAS_LOWLEVEL_INIT=y +CONFIG_MACH_DO_LOWLEVEL_INIT=y +CONFIG_PROMPT="barebox:" +CONFIG_BAUDRATE=115200 +# CONFIG_LONGHELP is not set +CONFIG_CBSIZE=1024 +CONFIG_MAXARGS=16 +CONFIG_SHELL_HUSH=y +# CONFIG_SHELL_SIMPLE is not set +CONFIG_GLOB=y +CONFIG_PROMPT_HUSH_PS2="cpuimx25>" +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_DYNAMIC_CRC_TABLE=y +# CONFIG_ERRNO_MESSAGES is not set +CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y +CONFIG_CONSOLE_ACTIVATE_FIRST=y +# CONFIG_OF_FLAT_TREE is not set +CONFIG_PARTITION=y +CONFIG_DEFAULT_ENVIRONMENT=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="board/eukrea_cpuimx25/env" + +# +# Debugging +# +# CONFIG_DEBUG_INFO is not set +# CONFIG_ENABLE_FLASH_NOISE is not set +# CONFIG_ENABLE_PARTITION_NOISE is not set +# CONFIG_ENABLE_DEVICE_NOISE is not set + +# +# Commands +# + +# +# scripting +# +CONFIG_CMD_EDIT=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y + +# +# file commands +# +CONFIG_CMD_LS=y +CONFIG_CMD_RM=y +CONFIG_CMD_CAT=y +CONFIG_CMD_MKDIR=y +CONFIG_CMD_RMDIR=y +CONFIG_CMD_CP=y +CONFIG_CMD_PWD=y +CONFIG_CMD_CD=y +CONFIG_CMD_MOUNT=y +CONFIG_CMD_UMOUNT=y + +# +# console +# +CONFIG_CMD_CLEAR=y +CONFIG_CMD_ECHO=y + +# +# memory +# +# CONFIG_CMD_LOADB is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_CRC=y +CONFIG_CMD_MTEST=y +# CONFIG_CMD_MTEST_ALTERNATIVE is not set + +# +# flash +# +CONFIG_CMD_FLASH=y + +# +# booting +# +CONFIG_CMD_BOOTM=y +# CONFIG_CMD_BOOTM_ZLIB is not set +# CONFIG_CMD_BOOTM_BZLIB is not set +# CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y +# CONFIG_CMD_LINUX16 is not set +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_TEST=y +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y +CONFIG_CMD_BMP=y +CONFIG_CMD_GPIO=y +CONFIG_NET=y +CONFIG_NET_DHCP=y +# CONFIG_NET_RARP is not set +# CONFIG_NET_NFS is not set +CONFIG_NET_PING=y +CONFIG_NET_TFTP=y + +# +# Drivers +# + +# +# serial drivers +# +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set +CONFIG_DRIVER_SERIAL_IMX=y +# CONFIG_DRIVER_SERIAL_NS16550 is not set +CONFIG_MIIPHY=y + +# +# Network drivers +# +# CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set +CONFIG_DRIVER_NET_FEC_IMX=y + +# +# SPI drivers +# +# CONFIG_SPI is not set +# CONFIG_I2C is not set + +# +# flash drivers +# +# CONFIG_DRIVER_CFI is not set +CONFIG_NAND=y +CONFIG_NAND_IMX=y +CONFIG_NAND_IMX_BOOT=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_ATA is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +CONFIG_VIDEO=y +CONFIG_DRIVER_VIDEO_IMX=y +# CONFIG_IMXFB_DRIVER_VIDEO_IMX_OVERLAY is not set + +# +# Filesystem support +# +# CONFIG_FS_CRAMFS is not set +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y +CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not setarch/arm/mach-imx/Kconfig +10
-0@@ -2,6 +2,7 @@ if ARCH_IMX config ARCH_TEXT_BASE hex + default 0x83f00000 if MACH_EUKREA_CPUIMX25 default 0xa0000000 if MACH_EUKREA_CPUIMX27 default 0x08f00000 if MACH_MX1ADS default 0xc0000000 if MACH_IMX21ADS@@ -16,6 +17,7 @@ config ARCH_TEXT_BASE default 0x08f80000 if MACH_SCB9328 config BOARDINFO + default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25 default "Eukrea CPUIMX27" if MACH_EUKREA_CPUIMX27 default "Freescale i.MX21 ADS" if MACH_IMX21ADS default "Freescale i.MX27 ADS" if MACH_IMX27ADS@@ -124,6 +126,14 @@ choice prompt "i.MX25 Board Type" +config MACH_EUKREA_CPUIMX25 + bool "Eukrea CPUIMX25" + select MACH_HAS_LOWLEVEL_INIT + select HAVE_MMU + help + Say Y here if you are using the Eukrea Electromatique's CPUIMX25 + equipped with a Freescale i.MX25 Processor + config MACH_FREESCALE_MX25_3STACK bool "Freescale MX25 3stack" select HAS_CFIboard/eukrea_cpuimx25/Makefile new file +24
-0@@ -0,0 +1,24 @@ +# +# (C) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +obj-y += lowlevel.o +obj-y += eukrea_cpuimx25.oboard/eukrea_cpuimx25/config.h new file +27
-0@@ -0,0 +1,27 @@ +/* +* (c) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX25_HCLK_FREQ 24000000 + +#endif + +/* nothing to do here yet */ board/eukrea_cpuimx25/env/bin/_update new file +36
-0@@ -0,0 +1,36 @@ +#!/bin/sh + +if [ -z "$part" -o -z "$image" ]; then + echo "define \$part and \$image" + exit 1 +fi + +if [ ! -e "$part" ]; then + echo "Partition $part does not exist" + exit 1 +fi + +if [ $# = 1 ]; then + image=$1 +fi + +if [ x$ip = xdhcp ]; then + dhcp +fi + +ping $eth0.serverip +if [ $? -ne 0 ] ; then + echo "update aborted" + exit 1 +fi + +unprotect $part + +echo +echo "erasing partition $part" +erase $part + +echo +echo "flashing $image to $part" +echo +tftp $image $partboard/eukrea_cpuimx25/env/bin/boot new file +53
-0@@ -0,0 +1,53 @@ +#!/bin/sh + +. /env/config + +if [ x$1 = xjffS2 ]; then + root=jffs2 + kernel=nand +fi + +if [ x$1 = xubifs ]; then + root=ubifs + kernel=nand +fi + +if [ x$1 = xnet ]; then + root=net + kernel=net +fi + +if [ x$ip = xdhcp ]; then + bootargs="$bootargs ip=dhcp" +else + if [ x$ip = xoff ]; then + bootargs="$bootargs ip=off" + else + bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::" + fi +fi + +if [ x$root = xjffs2 ]; then + bootargs="$bootargs root=/dev/mtdblock$rootpartnum_nand rootfstype=jffs2" +fi + +if [ x$root = xubifs ]; then + bootargs="$bootargs root=ubi0:root ubi.mtd=$rootpartnum_nand rootfstype=ubifs" +fi + +if [ x$root = xnet ]; then + bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp" +fi + +bootargs="$bootargs mtdparts=mxc_nand:$nand_parts" + +if [ $kernel = net ]; then + if [ x$ip = xdhcp ]; then + dhcp + fi + tftp $uimage uImage || exit 1 + bootm uImage +else + bootm /dev/nand0.kernel.bb +fi +board/eukrea_cpuimx25/env/bin/hush_hack new file +1
-0@@ -0,0 +1 @@ +nand -a /dev/nand0.*board/eukrea_cpuimx25/env/bin/init new file +38
-0@@ -0,0 +1,38 @@ +#!/bin/sh + +PATH=/env/bin +export PATH + +. /env/config +if [ -e /dev/nand0 ]; then + addpart /dev/nand0 $nand_parts + + # Uh, oh, hush first expands wildcards and then starts executing + # commands. What a bug! + source /env/bin/hush_hack +fi + +if [ -f /env/logo.bmp ]; then + bmp /env/logo.bmp +fi + +if [ -z $eth0.ethaddr ]; then + while [ -z $eth0.ethaddr ]; do + readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr + done + echo -a /env/config "eth0.ethaddr=$eth0.ethaddr" + saveenv +fi + +echo +echo -n "Hit any key to stop autoboot: " +timeout -a $autoboot_timeout +if [ $? != 0 ]; then + echo + echo "type update_kernel [<imagename>] to update kernel into flash" + echo "type update_root [<imagename>] to update rootfs into flash" + echo + exit +fi + +bootboard/eukrea_cpuimx25/env/bin/update_kernel new file +8
-0@@ -0,0 +1,8 @@ +#!/bin/sh + +. /env/config + +image=$uimage +part=/dev/nand0.kernel.bb + +. /env/bin/_update $1board/eukrea_cpuimx25/env/bin/update_root new file +8
-0@@ -0,0 +1,8 @@ +#!/bin/sh + +. /env/config + +image=$rootfs +part=/dev/nand0.root.bb + +. /env/bin/_update $1board/eukrea_cpuimx25/env/config new file +26
-0@@ -0,0 +1,26 @@ +#!/bin/sh + +# can be either 'net' or 'jffs2' or 'ubifs' +kernel=nand +root=jffs2 + +basedir=cpuimx25 +uimage=$basedir/uImage +rootfs=$basedir/rootfs + +autoboot_timeout=1 + +nfsroot="" +bootargs="console=ttymxc0,115200" + +nand_parts="256k(barebox)ro,128k(bareboxenv),2176k(kernel),-(root)" +rootpartnum_nand=3 + +# use 'dhcp' to do dhcp in barebox and in kernel +ip=dhcp + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.gateway=a.b.c.d +eth0.serverip=192.168.1.15board/eukrea_cpuimx25/eukrea_cpuimx25.c new file +275
-0@@ -0,0 +1,275 @@ +/* +* (C) 2009 Pengutronix, Sascha Hauer <[email protected]> +* (c) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ + +#include <common.h> +#include <init.h> +#include <driver.h> +#include <environment.h> +#include <mach/imx-regs.h> +#include <asm/armlinux.h> +#include <mach/gpio.h> +#include <asm/io.h> +#include <asm/mmu.h> + +#include <partition.h> +#include <asm/mach-types.h> +#include <mach/imx-nand.h> +#include <mach/imxfb.h> +#include <fec.h> +#include <nand.h> +#include <mach/imx-flash-header.h> +#include <mach/iomux-mx25.h> + +extern unsigned long _stext; + +void __naked __flash_header_start go(void) +{ + __asm__ __volatile__("b exception_vectors\n" ); +} + +struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = { + { .ptr_type =4 , .addr =0xb8001010 , .val =0x00000004 , }, + { .ptr_type =4 , .addr =0xb8001000 , .val =0x92100000 , }, + { .ptr_type =1 , .addr =0x80000400 , .val =0x12344321 , }, + { .ptr_type =4 , .addr =0xb8001000 , .val =0xa2100000 , }, + { .ptr_type =4 , .addr =0x80000000 , .val =0x12344321 , }, + { .ptr_type =4 , .addr =0x80000000 , .val =0x12344321 , }, + { .ptr_type =4 , .addr =0xb8001000 , .val =0xb2100000 , }, + { .ptr_type =1 , .addr =0x80000033 , .val =0xda , }, + { .ptr_type =1 , .addr =0x81000000 , .val =0xff , }, + { .ptr_type =4 , .addr =0xb8001000 , .val =0x82216080 , }, + { .ptr_type =4 , .addr =0xb8001004 , .val =0x00295729 , }, + { .ptr_type =4 , .addr =0x53f80008 , .val =0x20034000 , }, +}; + +#define APP_DEST 0x80000000 + +struct imx_flash_header __flash_header_0x400 eukrea_cpuimx25_header = { + .app_code_jump_vector =TEXT_BASE +0x2000 , + .app_code_barker =APP_CODE_BARKER , + .app_code_csf =0 , + .dcd_ptr_ptr =TEXT_BASE +0x400 + offsetof(struct imx_flash_header , dcd), + .super_root_key =0 , + .dcd =TEXT_BASE +0x400 + offsetof(struct imx_flash_header , dcd_barker), + .app_dest =TEXT_BASE , + .dcd_barker =DCD_BARKER , + .dcd_block_len =sizeof (dcd_entry), +}; + +extern unsigned long __bss_start; + +unsigned long __image_len_0x400 barebox_len =0x40000 ; + +static struct fec_platform_data fec_info = { + .xcv_type =RMII , + .phy_addr =1 , +}; + +static struct device_d fec_dev = { + .name ="fec_imx" , + .map_base =IMX_FEC_BASE , + .platform_data = &fec_info, +}; + +static struct memory_platform_data sdram_pdata = { + .name ="ram0" , + .flags =DEVFS_RDWR , +}; + +static struct device_d sdram0_dev = { + .name ="mem" , + .map_base =IMX_SDRAM_CS0 , + .size =64 *1024 *1024 , + .platform_data = &sdram_pdata, +}; + +struct imx_nand_platform_data nand_info = { + .width =1 , + .hw_ecc =1 , +}; + +static struct device_d nand_dev = { + .name ="imx_nand" , + .map_base =IMX_NFC_BASE , + .platform_data = &nand_info, +}; + +static struct imx_fb_videomode imxfb_mode = { + .mode = { + .name ="CMO-QVGA" , + .refresh =60 , + .xres =320 , + .yres =240 , + .pixclock =KHZ2PICOS (6500 ), + .hsync_len =30 , + .left_margin =38 , + .right_margin =20 , + .vsync_len =3 , + .upper_margin =15 , + .lower_margin =4 , + }, + .pcr =0xCAD08B80 , + .bpp =16 , +}; + +static struct imx_fb_platform_data eukrea_cpuimx25_fb_data = { + .mode = &imxfb_mode, + .pwmr =0x00A903FF , + .lscr1 =0x00120300 , + .dmacr =0x80040060 , +}; + + +static struct device_d imxfb_dev = { + .name ="imxfb" , + .map_base =0x53fbc000 , + .size =0x1000 , + .platform_data = &eukrea_cpuimx25_fb_data, +}; + +#ifdef CONFIG_MMU +static void eukrea_cpuimx25_mmu_init (void ) +{ +mmu_init (); + +arm_create_section (0x80000000 ,0x80000000 ,128 ,PMD_SECT_DEF_CACHED ); +arm_create_section (0x90000000 ,0x80000000 ,128 ,PMD_SECT_DEF_UNCACHED ); + +setup_dma_coherent (0x10000000 ); + +mmu_enable (); +} +#else +static void eukrea_cpuimx25_mmu_init (void ) +{ +} +#endif + +static struct pad_desc eukrea_cpuimx25_pads[] = { +MX25_PAD_FEC_MDC__MDC , +MX25_PAD_FEC_MDIO__MDIO , +MX25_PAD_FEC_RDATA0__RDATA0 , +MX25_PAD_FEC_RDATA1__RDATA1 , +MX25_PAD_FEC_RX_DV__RX_DV , +MX25_PAD_FEC_TDATA0__TDATA0 , +MX25_PAD_FEC_TDATA1__TDATA1 , +MX25_PAD_FEC_TX_CLK__TX_CLK , +MX25_PAD_FEC_TX_EN__TX_EN , +/* UART1 */ +MX25_PAD_UART1_RXD__RXD_MUX , +MX25_PAD_UART1_TXD__TXD_MUX , +MX25_PAD_UART1_RTS__RTS , +MX25_PAD_UART1_CTS__CTS , +/* LCDC */ +MX25_PAD_LD0__LCDC_LD0 , +MX25_PAD_LD1__LCDC_LD1 , +MX25_PAD_LD2__LCDC_LD2 , +MX25_PAD_LD3__LCDC_LD3 , +MX25_PAD_LD4__LCDC_LD4 , +MX25_PAD_LD5__LCDC_LD5 , +MX25_PAD_LD6__LCDC_LD6 , +MX25_PAD_LD7__LCDC_LD7 , +MX25_PAD_LD8__LCDC_LD8 , +MX25_PAD_LD9__LCDC_LD9 , +MX25_PAD_LD10__LCDC_LD10 , +MX25_PAD_LD11__LCDC_LD11 , +MX25_PAD_LD12__LCDC_LD12 , +MX25_PAD_LD13__LCDC_LD13 , +MX25_PAD_LD14__LCDC_LD14 , +MX25_PAD_LD15__LCDC_LD15 , +MX25_PAD_GPIO_E__LCDC_LD16 , +MX25_PAD_GPIO_F__LCDC_LD17 , +MX25_PAD_LSCLK__LCDC_LSCLK , +MX25_PAD_OE_ACD__LCDC_OE_ACD , +MX25_PAD_VSYNC__LCDC_VSYN , +MX25_PAD_HSYNC__LCDC_HSYN , +/* BACKLIGHT CONTROL */ +MX25_PAD_PWM__GPIO26 , +}; + +static int eukrea_cpuimx25_devices_init (void ) +{ +eukrea_cpuimx25_mmu_init (); + +mxc_iomux_v3_setup_multiple_pads (eukrea_cpuimx25_pads, +ARRAY_SIZE (eukrea_cpuimx25_pads)); +register_device (&fec_dev); + + nand_info.width =1 ; +register_device (&nand_dev); + +devfs_add_partition ("nand0" ,0x00000 ,0x40000 , +PARTITION_FIXED ,"self_raw" ); +dev_add_bb_dev ("self_raw" ,"self0" ); + +devfs_add_partition ("nand0" ,0x40000 ,0x40000 , +PARTITION_FIXED ,"env_raw" ); +dev_add_bb_dev ("env_raw" ,"env0" ); + +register_device (&sdram0_dev); + +/* enable LCD */ +gpio_direction_output (26 ,1 ); +gpio_set_value (26 ,1 ); + +register_device (&imxfb_dev); + +armlinux_add_dram (&sdram0_dev); +armlinux_set_bootparams ((void *)0x80000100 ); +armlinux_set_architecture (MACH_TYPE_MX25_3DS ); + +return 0 ; +} + +device_initcall (eukrea_cpuimx25_devices_init); + +static struct device_d eukrea_cpuimx25_serial_device = { + .name ="imx_serial" , + .map_base =IMX_UART1_BASE , + .size =16 *1024 , +}; + +static int eukrea_cpuimx25_console_init (void ) +{ +writel (0x03010101 ,IMX_CCM_BASE +CCM_PCDR3 ); +register_device (&eukrea_cpuimx25_serial_device); +return 0 ; +} + +console_initcall (eukrea_cpuimx25_console_init); + +#ifdef CONFIG_NAND_IMX_BOOT +void __bare_init nand_boot(void) +{ +imx_nand_load_image ((void *)TEXT_BASE ,256 *1024 ); +} +#endif + +static int eukrea_cpuimx25_core_setup (void ) +{ +writel (0x01010103 ,IMX_CCM_BASE +CCM_PCDR2 ); +return 0 ; + +} +core_initcall (eukrea_cpuimx25_core_setup);board/eukrea_cpuimx25/lowlevel.c new file +130
-0@@ -0,0 +1,130 @@ +/* +* +* (c) 2007 Pengutronix, Sascha Hauer <[email protected]> +* (c) 2010 Eukrea Electromatique, Eric Bénard <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <common.h> +#include <init.h> +#include <mach/imx-regs.h> +#include <mach/imx-pll.h> +#include <mach/esdctl.h> +#include <asm/cache-l2x0.h> +#include <asm/io.h> +#include <mach/imx-nand.h> +#include <asm/barebox-arm.h> +#include <asm-generic/memory_layout.h> +#include <asm/system.h> + +static void __bare_init __naked insdram(void) +{ +uint32_t r; + +/* setup a stack to be able to call imx_nand_load_image() */ + r =STACK_BASE +STACK_SIZE -12 ; + __asm__ __volatile__("mov sp, %0" : :"r" (r)); + +imx_nand_load_image ((void *)TEXT_BASE ,256 *1024 ); + +board_init_lowlevel_return (); +} + +#define MX25_CCM_MCR 0x64 +#define MX25_CCM_CGR0 0x0c +#define MX25_CCM_CGR1 0x10 +#define MX25_CCM_CGR2 0x14 + +void __bare_init __naked board_init_lowlevel(void) +{ +uint32_t r; +unsigned int *trg, *src; +int i; + +/* AIPS setup - Only setup MPROTx registers. The PACR default values are good. +* Set all MPROTx to be non-bufferable, trusted for R/W, +* not forced to user-mode. +*/ +writel (0x77777777 ,0x43f00000 ); +writel (0x77777777 ,0x43f00004 ); +writel (0x77777777 ,0x53f00000 ); +writel (0x77777777 ,0x53f00004 ); + +/* MAX (Multi-Layer AHB Crossbar Switch) setup +* MPR - priority for MX25 is (SDHC2/SDMA)>USBOTG>RTIC>IAHB>DAHB +*/ +writel (0x00002143 ,0x43f04000 ); +writel (0x00002143 ,0x43f04100 ); +writel (0x00002143 ,0x43f04200 ); +writel (0x00002143 ,0x43f04300 ); +writel (0x00002143 ,0x43f04400 ); +/* SGPCR - always park on last master */ +writel (0x10 ,0x43f04010 ); +writel (0x10 ,0x43f04110 ); +writel (0x10 ,0x43f04210 ); +writel (0x10 ,0x43f04310 ); +writel (0x10 ,0x43f04410 ); +/* MGPCR - restore default values */ +writel (0x0 ,0x43f04800 ); +writel (0x0 ,0x43f04900 ); +writel (0x0 ,0x43f04a00 ); +writel (0x0 ,0x43f04b00 ); +writel (0x0 ,0x43f04c00 ); + +/* Configure M3IF registers +* M3IF Control Register (M3IFCTL) for MX25 +* MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001 +* MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000 +* MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000 +* MRRP[3] = USB HOST not on priority list (0 << 3) = 0x00000000 +* MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000 +* MRRP[5] = SD/ATA/FEC not on priority list (0 << 5) = 0x00000000 +* MRRP[6] = SCMFBC not on priority list (0 << 6) = 0x00000000 +* MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000 +* ---------- +* 0x00000001 +*/ +writel (0x1 ,0xb8003000 ); + +/* enable all the clocks */ +writel (0x038A81A2 ,IMX_CCM_BASE +MX25_CCM_CGR0 ); +writel (0x24788F00 ,IMX_CCM_BASE +MX25_CCM_CGR1 ); +writel (0x00004438 ,IMX_CCM_BASE +MX25_CCM_CGR2 ); +writel (0x00 ,IMX_CCM_BASE +MX25_CCM_MCR ); + +#ifdef CONFIG_NAND_IMX_BOOT +/* skip NAND boot if not running from NFC space */ + r =get_pc (); +if (r <IMX_NFC_BASE || r >IMX_NFC_BASE +0x1000 ) +board_init_lowlevel_return (); + + src = (unsigned int *)IMX_NFC_BASE ; + trg = (unsigned int *)TEXT_BASE ; + +/* Move ourselves out of NFC SRAM */ +for (i =0 ; i <0x1000 /sizeof (int ); i++) + *trg++ = *src++; + +/* Jump to SDRAM */ + r = (unsigned int )&insdram; + __asm__ __volatile__("mov pc, %0" : :"r" (r)); +#else +board_init_lowlevel_return (); +#endif +}Signature · 1 line
1.6.3.3
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox