mac80211: Fix basic rates for created IBSS networks
Subsystems (2)
PATCH v2 1/1 mac80211: Fix basic rates for created IBSS networks
Currently the mac80211 marks rates 1 and 2 mbps as basic rates for created ad-hoc networks. To be certifiable, rates 1, 2, 5.5 and 11 need to be marked basic.
Change this.
--- net/mac80211/ibss.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
net/mac80211/ibss.c +2 -1
@@ -529,7 +529,8 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted =0 ;__ieee80211_sta_join_ibss (sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel,3 ,/* first two are basic */ + ifibss->channel, +15 ,/* 1, 2, 5.5 and 11 are basic */ capability,0 ); }
Signature · 1 line
1.6.3.3
Johannes Berg
maintainerQuoted 16 lines · Juuso Oikarinen
Currently the mac80211 marks rates 1 and 2 mbps as basic rates for created ad-hoc networks. To be certifiable, rates 1, 2, 5.5 and 11 need to be marked basic.
Change this.
Signed-off-by Juuso Oikarinen <[email protected]>--- net/mac80211/ibss.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)net/mac80211/ibss.c +0
-0
net/mac80211/ibss.c static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) · line 533
Quoted 6 lines
net/mac80211/ibss.c +2
-1@@ -529,7 +529,8 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted =0 ; __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel, 3, /* first two are basic */ + ifibss->channel, + 15, /* 1, 2, 5.5 and 11 are basic */
It's still wrong for 5 GHz.
We've had this discussion before. Making more rates required will break compatibility with 11b devices.
What should be done here is add a basic rates parameter to the IBSS join nl80211 command so that you can decide at runtime which rates to use as basic.
johannes
Quoted 19 lines · ext Johannes Berg
Quoted 18 lines · Juuso Oikarinen
Currently the mac80211 marks rates 1 and 2 mbps as basic rates for created ad-hoc networks. To be certifiable, rates 1, 2, 5.5 and 11 need to be marked basic.
Change this.
Signed-off-by Juuso Oikarinen <[email protected]>--- net/mac80211/ibss.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)net/mac80211/ibss.c +0
-0@@ -529,7 +529,8 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted =0 ;
Quoted 6 lines
net/mac80211/ibss.c static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) · line 533
Quoted 4 lines
net/mac80211/ibss.c +2
-1__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel, 3, /* first two are basic */ + ifibss->channel, + 15, /* 1, 2, 5.5 and 11 are basic */It's still wrong for 5 GHz.
Yes, it is as wrong for 5GHz as it was before the change.
Quoted 3 lines
We've had this discussion before. Making more rates required will break compatibility with 11b devices.
I don't understand this. AFAIK also in 11b all these rates are mandatory. How come this breaks 11b?
This change is for creating IBSS, not joining. In case of joining, we still adhere to the basic rates set by the creator, or that is what I understand based on the code.
Quoted 3 lines
What should be done here is add a basic rates parameter to the IBSS join nl80211 command so that you can decide at runtime which rates to use as basic.
Yeah, this is a solution needed latest when 5GHz support is implemented.
-Juuso
Quoted 2 lines
johannes
Johannes Berg
maintainerQuoted 7 lines · Juuso Oikarinen
Quoted 7 lines
Quoted 7 lines
net/mac80211/ibss.c +0
-0@@ -529,7 +529,8 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted =0 ;
Quoted 8 lines
Quoted 6 lines
net/mac80211/ibss.c static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) · line 533
Quoted 4 lines
net/mac80211/ibss.c +2
-1__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel, 3, /* first two are basic */ + ifibss->channel, + 15, /* 1, 2, 5.5 and 11 are basic */It's still wrong for 5 GHz.
Yes, it is as wrong for 5GHz as it was before the change.
No it wasn't wrong before the change, and only the comment is now wrong ...
before the change, 6 and 9 mbps were basic for 5ghz, now it would be 5,9,12 and 18. Neither set actually overlaps with the mandatory rates, which is a bug I guess?
Quoted 5 lines
Quoted 2 lines
We've had this discussion before. Making more rates required will break compatibility with 11b devices.
I don't understand this. AFAIK also in 11b all these rates are mandatory. How come this breaks 11b?
No, only 1mbit is really mandatory in 11b. So I guess our default should be just "1" rather than "3" or something like that.
Quoted 9 lines
This change is for creating IBSS, not joining. In case of joining, we still adhere to the basic rates set by the creator, or that is what I understand based on the code.
Quoted 3 lines
What should be done here is add a basic rates parameter to the IBSS join nl80211 command so that you can decide at runtime which rates to use as basic.
Yeah, this is a solution needed latest when 5GHz support is implemented.
Well this hopefully doesn't come as a surprise to you, but mac80211 does support 5 GHz operation :)
johannes
Quoted 16 lines · ext Johannes Berg
Quoted 14 lines · Juuso Oikarinen
Quoted 13 lines
net/mac80211/ibss.c static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) · line 533
Quoted 11 lines
net/mac80211/ibss.c +2
-1@@ -529,7 +529,8 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted =0 ; __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel, 3, /* first two are basic */ + ifibss->channel, + 15, /* 1, 2, 5.5 and 11 are basic */It's still wrong for 5 GHz.
Quoted 8 lines
Quoted 1 line
Yes, it is as wrong for 5GHz as it was before the change.
No it wasn't wrong before the change, and only the comment is now wrong ...
before the change, 6 and 9 mbps were basic for 5ghz, now it would be 5,9,12 and 18. Neither set actually overlaps with the mandatory rates, which is a bug I guess?
Ah, now I get it. So the rate bitmap changes - I had a confusion here.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
We've had this discussion before. Making more rates required will break compatibility with 11b devices.
I don't understand this. AFAIK also in 11b all these rates are mandatory. How come this breaks 11b?
No, only 1mbit is really mandatory in 11b. So I guess our default should be just "1" rather than "3" or something like that.
That's weird. At least in certification PoV, AFAIK, a device would not pass with just 1mbit even for 11b.
Quoted 4 lines
Quoted 4 lines
This change is for creating IBSS, not joining. In case of joining, we still adhere to the basic rates set by the creator, or that is what I understand based on the code.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
What should be done here is add a basic rates parameter to the IBSS join nl80211 command so that you can decide at runtime which rates to use as basic.
Yeah, this is a solution needed latest when 5GHz support is implemented.
Well this hopefully doesn't come as a surprise to you, but mac80211 does support 5 GHz operation :)
Yeah, I know there is support (even the wl1271 has preliminary) but there are also some issues ;)
So it seems to me that if we want this fixed, we would have to go with an interface update?
Quoted 6 lines
johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Johannes Berg
maintainerTBD
Needs to be split up (setting bss_conf and the bss_change flag is a separate bugfix) and tested but this is what I think it should be like.
--- include/net/cfg80211.h | 2 + net/mac80211/ibss.c | 5 +++- net/mac80211/ieee80211_i.h | 2 + net/wireless/nl80211.c | 47 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 55 insertions(+), 1 deletion(-)
include/net/cfg80211.h +2 -0
@@ -801,6 +801,7 @@ struct cfg80211_disassoc_request {* @beacon_interval: beacon interval to use * @privacy: this is a protected network, keys will be configured * after joining +* @basic_rates: bitmap of basic rates to use when creating the IBSS */ struct cfg80211_ibss_params {u8 *ssid;
@@ -809,6 +810,7 @@ struct cfg80211_ibss_params {u8 *ie;u8 ssid_len, ie_len;u16 beacon_interval; +u32 basic_rates;bool channel_fixed;bool privacy; };
net/wireless/nl80211.c +47 -0
53 lines not on this page · raw message
net/mac80211/ibss.c +4 -1
@@ -172,11 +172,13 @@ static void __ieee80211_sta_join_ibss(strcu_assign_pointer (ifibss->presp, skb); sdata->vif.bss_conf.beacon_int = beacon_int; + sdata->vif.bss_conf.basic_rates = basic_rates; bss_change =BSS_CHANGED_BEACON_INT ; bss_change |=ieee80211_reset_erp_info (sdata); bss_change |=BSS_CHANGED_BSSID ; bss_change |=BSS_CHANGED_BEACON ; bss_change |=BSS_CHANGED_BEACON_ENABLED ; + bss_change |=BSS_CHANGED_BASIC_RATES ; bss_change |=BSS_CHANGED_IBSS ; sdata->vif.bss_conf.ibss_joined = true;ieee80211_bss_info_change_notify (sdata, bss_change);
@@ -529,7 +531,7 @@ static void ieee80211_sta_create_ibss(st sdata->drop_unencrypted =0 ;__ieee80211_sta_join_ibss (sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel,3 ,/* first two are basic */ + ifibss->channel, ifibss->basic_rates, capability,0 ); }
@@ -910,6 +912,7 @@ int ieee80211_ibss_join(struct ieee80211 sdata->u.ibss.fixed_bssid = false; sdata->u.ibss.privacy = params->privacy; + sdata->u.ibss.basic_rates = params->basic_rates; sdata->vif.bss_conf.beacon_int = params->beacon_interval;
net/mac80211/ieee80211_i.h +2 -0
@@ -393,6 +393,8 @@ struct ieee80211_if_ibss {unsigned long request;unsigned long last_scan_completed; +u32 basic_rates; +bool timer_running;bool fixed_bssid;
Quoted 2 lines · On Wednesday 26 May 2010 23:14:36 you wrote:
Needs to be split up (setting
bss_confand thebss_changeflag is a separate bugfix) and tested but this is what I think it should be like.
thanks for this!
Quoted 8 lines
net/wireless/nl80211.c +8
-0+ }else { +/* +* If no rates were explicitly configured, +* use the mandatory rate set for 11b or +* 11a for maximum compatibility. +*/ +struct ieee80211_supported_band *sband = + wiphy->bands[ibss.channel->band];
net/wireless/nl80211.c static int nl80211_join_ibss(struct sk_b · line 4003
Quoted 10 lines
net/wireless/nl80211.c +10
-0+int j; +u32 flag = ibss.channel->band ==IEEE80211_BAND_5GHZ ? +IEEE80211_RATE_MANDATORY_A : +IEEE80211_RATE_MANDATORY_B ; + +for (j =0 ; j < sband->n_bitrates; j++) { +if (sband->bitrates[j].flags & flag) + ibss.basic_rates |= j; + } + }
couldn't we use ieee80211_mandatory_rates() here?
bruno
Johannes Berg
maintainerQuoted 12 lines · Bruno Randolf
Quoted 12 lines
net/wireless/nl80211.c +12
-0+ }else { +/* +* If no rates were explicitly configured, +* use the mandatory rate set for 11b or +* 11a for maximum compatibility. +*/ +struct ieee80211_supported_band *sband = + wiphy->bands[ibss.channel->band]; +int j; +u32 flag = ibss.channel->band ==IEEE80211_BAND_5GHZ ? +IEEE80211_RATE_MANDATORY_A : +IEEE80211_RATE_MANDATORY_B ;
Quoted 8 lines
net/wireless/nl80211.c static int nl80211_join_ibss(struct sk_b · line 4003
Quoted 6 lines
net/wireless/nl80211.c +6
-0+ +for (j =0 ; j < sband->n_bitrates; j++) { +if (sband->bitrates[j].flags & flag) + ibss.basic_rates |= j; + } + }couldn't we use
ieee80211_mandatory_rates()here?
Yeah, but it would have to migrate to cfg80211.
johannes
PATCH 1/1 mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
In reply to Johannes BergIEEE802.11-2007 clause 18.2.3.3 (p640) states that 1, 2, 5.5 & 11 Mbits are mandatory rates for what they call High Rate direct sequence spread spectrum (HR/DSSS) PHY (with long PLCP).
--- net/wireless/util.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
net/wireless/util.c +6 -6
@@ -100,17 +100,17 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,case IEEE80211_BAND_2GHZ : want =7 ;for (i =0 ; i < sband->n_bitrates; i++) { -if (sband->bitrates[i].bitrate ==10 ) { +if (sband->bitrates[i].bitrate ==10 || + sband->bitrates[i].bitrate ==20 || + sband->bitrates[i].bitrate ==55 || + sband->bitrates[i].bitrate ==110 ) { sband->bitrates[i].flags |=IEEE80211_RATE_MANDATORY_B |IEEE80211_RATE_MANDATORY_G ; want--; } -if (sband->bitrates[i].bitrate ==20 || - sband->bitrates[i].bitrate ==55 || - sband->bitrates[i].bitrate ==110 || - sband->bitrates[i].bitrate ==60 || +if (sband->bitrates[i].bitrate ==60 || sband->bitrates[i].bitrate ==120 || sband->bitrates[i].bitrate ==240 ) { sband->bitrates[i].flags |=
@@ -125,7 +125,7 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, sband->bitrates[i].flags |=IEEE80211_RATE_ERP_G ; } -WARN_ON (want !=0 && want !=3 && want !=6 ); +WARN_ON (want !=0 && want !=3 );break ;case IEEE80211_NUM_BANDS :WARN_ON (1 );
Re: [ath5k-devel] [PATCH] mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
Quoted 38 lines · Bruno Randolf
IEEE802.11-2007 clause 18.2.3.3 (p640) states that 1, 2, 5.5& 11 Mbits are mandatory rates for what they call High Rate direct sequence spread spectrum (HR/DSSS) PHY (with long PLCP).
Signed-off-by Bruno Randolf<[email protected]>--- net/wireless/util.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)net/wireless/util.c +5
-5@@ -100,17 +100,17 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,case IEEE80211_BAND_2GHZ : want =7 ;for (i =0 ; i< sband->n_bitrates; i++) { -if (sband->bitrates[i].bitrate ==10 ) { +if (sband->bitrates[i].bitrate ==10 || + sband->bitrates[i].bitrate ==20 || + sband->bitrates[i].bitrate ==55 || + sband->bitrates[i].bitrate ==110 ) { sband->bitrates[i].flags |=IEEE80211_RATE_MANDATORY_B |IEEE80211_RATE_MANDATORY_G ; want--; } -if (sband->bitrates[i].bitrate ==20 || - sband->bitrates[i].bitrate ==55 || - sband->bitrates[i].bitrate ==110 || - sband->bitrates[i].bitrate ==60 || +if (sband->bitrates[i].bitrate ==60 || sband->bitrates[i].bitrate ==120 || sband->bitrates[i].bitrate ==240 ) { sband->bitrates[i].flags |=
net/wireless/util.c static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, · line 131
Quoted 8 lines
net/wireless/util.c +1
-1@@ -125,7 +125,7 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, sband->bitrates[i].flags |=IEEE80211_RATE_ERP_G ; } -WARN_ON (want !=0 && want !=3 && want !=6 ); +WARN_ON (want !=0 && want !=3 );break ;case IEEE80211_NUM_BANDS :WARN_ON (1 );
Regards,
Benoit
Johannes Berg
maintainerRe: [PATCH] mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
In reply to Bruno RandolfQuoted 3 lines · Bruno Randolf
IEEE802.11-2007 clause 18.2.3.3 (p640) states that 1, 2, 5.5 & 11 Mbits are mandatory rates for what they call High Rate direct sequence spread spectrum (HR/DSSS) PHY (with long PLCP).
You're confused. Clause 18 is 11g, we knew that those were mandatory there, see the code you're modifying.
Clause 15 is 11b, and it shouldn't change.
So NACK.
johannes
Johannes Berg
maintainerRe: [PATCH] mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
Quoted 9 lines · Johannes Berg
Quoted 3 lines · Bruno Randolf
IEEE802.11-2007 clause 18.2.3.3 (p640) states that 1, 2, 5.5 & 11 Mbits are mandatory rates for what they call High Rate direct sequence spread spectrum (HR/DSSS) PHY (with long PLCP).
You're confused. Clause 18 is 11g, we knew that those were mandatory there, see the code you're modifying.
Clause 15 is 11b, and it shouldn't change.
No wait, I'm confused. Clause 19 is 11g, and Clause 18 is 11b. But what's Clause 15? Huh now I need to look back at this in more detail.
johannes
Re: [PATCH] mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
In reply to Johannes BergQuoted 5 lines · Johannes Berg
Quoted 3 lines · Bruno Randolf
IEEE802.11-2007 clause 18.2.3.3 (p640) states that 1, 2, 5.5& 11 Mbits are mandatory rates for what they call High Rate direct sequence spread spectrum (HR/DSSS) PHY (with long PLCP).
Quoted 8 lines
You're confused. Clause 18 is 11g, we knew that those were mandatory there, see the code you're modifying.
Clause 15 is 11b, and it shouldn't change.
So NACK.
johannes
I just dig through the various standards and besides there are still some grey areas in my mind (like what is HR/DSSS/PBCC mentioned in Clause 18 or DSSS-OFDM as specified in Clause 19, hopefully both are optional), we have :
802.11a = Clause 17, called OFDM
802.11b = Clause 15 (called DSSS) & Clause 18 (called HR/DSSS).
802.11g = Clause 19, called ERP with lots of variants : ERP-DSSS/CCK, ERP-OFDM, ERP-PBCC 802.11n = Clause 20, called HT for High Throughput, which also includes DUP-OFDM
Clause 15 defines 1 Mbits and 2 Mbits rates, long PLCP only
Clause 18 defines 5.5 Mbits and 11 Mbits. Optionally, short PLCP is available for 2 Mbits, 5.5 Mbits and 11 Mbits. Since it's optional, such short PLCP rates are probably not part of the mandatory rates.
Basic rate set must includes mandatory rates set. This is apparently what every other AP do today and I indeed see no points in adding more rates to the basic rate set other than what is already defined in the mandatory rate set (except we cannot rely on this rule when joining an existing BSS/IBSS, of course).
Does the patch you posted is intended to create a 802.11b only or 802.11bg AP/IBSS with a 802.11g hardware for instance?
Regards,
Benoit
Johannes Berg
maintainerRe: [PATCH] mac80211: mark 1, 2, 5.5 and 11Mbps as mandatory rates for 802.11b
Quoted 2 lines · Benoit Papillault
802.11a = Clause 17, called OFDM
802.11b = Clause 15 (called DSSS) & Clause 18 (called HR/DSSS).
Are you sure? Isn't clause 15 pre-amendement?
Quoted 6 lines
Clause 15 defines 1 Mbits and 2 Mbits rates, long PLCP only Clause 18 defines 5.5 Mbits and 11 Mbits. Optionally, short PLCP is available for 2 Mbits, 5.5 Mbits and 11 Mbits. Since it's optional, such short PLCP rates are probably not part of the mandatory rates.
Basic rate set must includes mandatory rates set.
I don't think this is true.
Quoted 5 lines
This is apparently
what every other AP do today and I indeed see no points in adding more rates to the basic rate set other than what is already defined in the mandatory rate set (except we cannot rely on this rule when joining an existing BSS/IBSS, of course).
Sure, you can add more than say 11b mandatory rates to specifically exclude non-11g stations from it to improve performance.
johannes
Quoted 4 lines · ext Johannes Berg
TBD
Needs to be split up (setting
bss_confand thebss_changeflag is a separate bugfix) and tested but this is what I think it should be like.
Yes, I think this would work. Are you planning on working on this patch?
-Juuso
Quoted 128 lines
Signed-off-by Johannes Berg <[email protected]>--- include/net/cfg80211.h | 2 + net/mac80211/ibss.c | 5 +++- net/mac80211/ieee80211_i.h | 2 + net/wireless/nl80211.c | 47 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 55 insertions(+), 1 deletion(-)include/net/cfg80211.h +2
-0@@ -801,6 +801,7 @@ struct cfg80211_disassoc_request {* @beacon_interval: beacon interval to use * @privacy: this is a protected network, keys will be configured * after joining +* @basic_rates: bitmap of basic rates to use when creating the IBSS */ struct cfg80211_ibss_params {u8 *ssid;@@ -809,6 +810,7 @@ struct cfg80211_ibss_params {u8 *ie;u8 ssid_len, ie_len;u16 beacon_interval; +u32 basic_rates;bool channel_fixed;bool privacy; };net/wireless/nl80211.c +47
-0@@ -3955,6 +3955,53 @@ static int nl80211_join_ibss(struct sk_b } } +if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES ]) { +u8 *rates =nla_data (info->attrs[NL80211_ATTR_BSS_BASIC_RATES ]); +int n_rates =nla_len (info->attrs[NL80211_ATTR_BSS_BASIC_RATES ]); +struct ieee80211_supported_band *sband = + wiphy->bands[ibss.channel->band]; +int i, j; + +if (n_rates ==0 ) { + err = -EINVAL ; + goto out; + } + +for (i =0 ; i < n_rates; i++) { +int rate = (rates[i] &0x7f ) *5 ; +bool found = false; + +for (j =0 ; j < sband->n_bitrates; j++) { +if (sband->bitrates[j].bitrate == rate) { + found = true; + ibss.basic_rates |= j; +break ; + } + } +if (!found) { + err = -EINVAL ; + goto out; + } + } + }else { +/* +* If no rates were explicitly configured, +* use the mandatory rate set for 11b or +* 11a for maximum compatibility. +*/ +struct ieee80211_supported_band *sband = + wiphy->bands[ibss.channel->band]; +int j; +u32 flag = ibss.channel->band ==IEEE80211_BAND_5GHZ ? +IEEE80211_RATE_MANDATORY_A : +IEEE80211_RATE_MANDATORY_B ; + +for (j =0 ; j < sband->n_bitrates; j++) { +if (sband->bitrates[j].flags & flag) + ibss.basic_rates |= j; + } + } + err =cfg80211_join_ibss (rdev, dev, &ibss, connkeys); out:net/mac80211/ibss.c +4
-1@@ -172,11 +172,13 @@ static void __ieee80211_sta_join_ibss(strcu_assign_pointer (ifibss->presp, skb); sdata->vif.bss_conf.beacon_int = beacon_int; + sdata->vif.bss_conf.basic_rates = basic_rates; bss_change =BSS_CHANGED_BEACON_INT ; bss_change |=ieee80211_reset_erp_info (sdata); bss_change |=BSS_CHANGED_BSSID ; bss_change |=BSS_CHANGED_BEACON ; bss_change |=BSS_CHANGED_BEACON_ENABLED ; + bss_change |=BSS_CHANGED_BASIC_RATES ; bss_change |=BSS_CHANGED_IBSS ; sdata->vif.bss_conf.ibss_joined = true;ieee80211_bss_info_change_notify (sdata, bss_change);@@ -529,7 +531,7 @@ static void ieee80211_sta_create_ibss(st sdata->drop_unencrypted =0 ;__ieee80211_sta_join_ibss (sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->channel,3 ,/* first two are basic */ + ifibss->channel, ifibss->basic_rates, capability,0 ); }@@ -910,6 +912,7 @@ int ieee80211_ibss_join(struct ieee80211 sdata->u.ibss.fixed_bssid = false; sdata->u.ibss.privacy = params->privacy; + sdata->u.ibss.basic_rates = params->basic_rates; sdata->vif.bss_conf.beacon_int = params->beacon_interval;net/mac80211/ieee80211_i.h +2
-0@@ -393,6 +393,8 @@ struct ieee80211_if_ibss {unsigned long request;unsigned long last_scan_completed; +u32 basic_rates; +bool timer_running;bool fixed_bssid;
Johannes Berg
maintainerQuoted 7 lines · Juuso Oikarinen
Quoted 4 lines · ext Johannes Berg
TBD
Needs to be split up (setting
bss_confand thebss_changeflag is a separate bugfix) and tested but this is what I think it should be like.Yes, I think this would work. Are you planning on working on this patch?
No.
johannes
Quoted 10 lines · ext Johannes Berg
Quoted 7 lines · Juuso Oikarinen
Quoted 4 lines · ext Johannes Berg
TBD
Needs to be split up (setting
bss_confand thebss_changeflag is a separate bugfix) and tested but this is what I think it should be like.Yes, I think this would work. Are you planning on working on this patch?
No.
Okay, I'll take the patch and work it further.
-Juuso
Quoted 2 lines
johannes