Register WM8750
Subsystems (5)
Properly register WM8750 codec on affected machines now that the WM8750 codec was converted to new API.
This is not even compile-tested, but should work, please test.
Cheers!
PATCH 1/2 pxa/spitz: Correctly register WM8750
This patch registers the WM8750 codec on a proper place on the SPITZ machine after the WM8750 driver was converted to new API.
--- arch/arm/mach-pxa/spitz.c | 3 +++ sound/soc/pxa/spitz.c | 36 ------------------------------------ 2 files changed, 3 insertions(+), 36 deletions(-)
arch/arm/mach-pxa/spitz.c +3 -0
@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = { .type = "max7310", .addr = 0x18, .platform_data = &akita_ioexp, + }, { + .type = "wm8750", + .addr = 0x1b, }, };
sound/soc/pxa/spitz.c +0 -36
@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = { .codec_dev = &soc_codec_dev_wm8750, }; -/* -* FIXME: This is a temporary bodge to avoid cross-tree merge issues. -* New drivers should register the wm8750 I2C device in the machine -* setup code (under arch/arm for ARM systems). -*/ -static int wm8750_i2c_register (void ) -{ -struct i2c_board_info info; -struct i2c_adapter *adapter; -struct i2c_client *client; - -memset (&info,0 ,sizeof (struct i2c_board_info )); - info.addr =0x1b ; -strlcpy (info.type,"wm8750" ,I2C_NAME_SIZE ); - - adapter =i2c_get_adapter (0 ); -if (!adapter) { -printk (KERN_ERR "can't get i2c adapter 0\n" ); -return -ENODEV ; - } - - client =i2c_new_device (adapter, &info); -i2c_put_adapter (adapter); -if (!client) { -printk (KERN_ERR "can't add i2c device at 0x%x\n" , - (unsigned int )info.addr); -return -ENODEV ; - } - -return 0 ; -} -static struct platform_device *spitz_snd_device;static int __init spitz_init (void )
@@ -369,10 +337,6 @@ static int __init spitz_init(void)if (!(machine_is_spitz () ||machine_is_borzoi () ||machine_is_akita ()))return -ENODEV ; - ret =wm8750_i2c_setup (); -if (ret !=0 ) -return ret; - spitz_snd_device =platform_device_alloc ("soc-audio" ,-1 );if (!spitz_snd_device)return -ENOMEM ;
Signature · 1 line
1.7.0
Eric Miao
AppliedPATCH 1/2 pxa/spitz: Correctly register WM8750
Quoted 4 lines · Marek Vasut
This patch registers the WM8750 codec on a proper place on the SPITZ machine after the WM8750 driver was converted to new API.
Signed-off-by Marek Vasut <[email protected]>
Applied to 'fix'.
Quoted 77 lines
---
?arch/arm/mach-pxa/spitz.c | ? ?3 +++ ?sound/soc/pxa/spitz.c ? ? | ? 36 ------------------------------------ ?2 files changed, 3 insertions(+), 36 deletions(-)arch/arm/mach-pxa/spitz.c +3
-0@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = { ? ? ? ? ? ? ? ?.type ? ? ? ? ? = "max7310", ? ? ? ? ? ? ? ?.addr ? ? ? ? ? = 0x18, ? ? ? ? ? ? ? ?.platform_data ?= &akita_ioexp, + ? ? ? }, { + ? ? ? ? ? ? ? .type ? ? ? ? ? = "wm8750", + ? ? ? ? ? ? ? .addr ? ? ? ? ? = 0x1b, ? ? ? ?}, ?};sound/soc/pxa/spitz.c +0
-37@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = { ? ? ? ?.codec_dev = &soc_codec_dev_wm8750, ?}; -/* -* FIXME: This is a temporary bodge to avoid cross-tree merge issues. -* New drivers should register the wm8750 I2C device in the machine -* setup code (under arch/arm for ARM systems). -*/ -static int wm8750_i2c_register (void ) -{ - ? ? ? struct i2c_board_info info; - ? ? ? struct i2c_adapter *adapter; - ? ? ? struct i2c_client *client; - - ? ? ? memset(&info, 0, sizeof(struct i2c_board_info)); - ? ? ? info.addr = 0x1b; - ? ? ? strlcpy(info.type, "wm8750", I2C_NAME_SIZE); - - ? ? ? adapter = i2c_get_adapter(0); - ? ? ? if (!adapter) { - ? ? ? ? ? ? ? printk(KERN_ERR "can't get i2c adapter 0\n"); - ? ? ? ? ? ? ? return -ENODEV; - ? ? ? } - - ? ? ? client = i2c_new_device(adapter, &info); - ? ? ? i2c_put_adapter(adapter); - ? ? ? if (!client) { - ? ? ? ? ? ? ? printk(KERN_ERR "can't add i2c device at 0x%x\n", - ? ? ? ? ? ? ? (unsigned int)info.addr); - ? ? ? ? ? ? ? return -ENODEV; - ? ? ? } - - ? ? ? return 0; -} - ?static struct platform_device *spitz_snd_device; ?static int __init spitz_init(void)@@ -369,10 +337,6 @@ static int __init spitz_init(void) ? ? ? ?if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita())) ? ? ? ? ? ? ? ?return -ENODEV; - ? ? ? ret = wm8750_i2c_setup(); - ? ? ? if (ret != 0) - ? ? ? ? ? ? ? return ret; - ? ? ? ?spitz_snd_device = platform_device_alloc("soc-audio", -1); ? ? ? ?if (!spitz_snd_device) ? ? ? ? ? ? ? ?return -ENOMEM; --1.7.0
PATCH 2/2 pxa/z2: Register WM8750
In reply to Marek VasutThis patch registers the WM8750 codec on a proper place on the ZipitZ2 machine after the WM8750 driver was converted to new API.
--- arch/arm/mach-pxa/z2.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
arch/arm/mach-pxa/z2.c +4 -1
@@ -479,7 +479,10 @@ static struct i2c_board_info __initdata z2_i2c_board_info[] = { { I2C_BOARD_INFO("aer915", 0x55), .platform_data = &batt_chip_info, - } + }, { + I2C_BOARD_INFO("wm8750", 0x1a), + }, + };static void __init z2_i2c_init (void )
Signature · 1 line
1.7.0