Zoom3: Add support for OMAP3630 Zoom3 board.
PATCH v2 1/1 Zoom3: Add support for OMAP3630 Zoom3 board.
From: Aldo Brett Cedillo Martinez <[email protected]>
This patch gives basic funcionality to OMAP3630 Zoom3 board.
Signed-off-by Aldo Brett Cedillo Martinez <[email protected]>
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/logicpd/zoom3/Makefile | 54 +++++++ board/logicpd/zoom3/config.mk | 33 +++++ board/logicpd/zoom3/debug_board.c | 66 +++++++++ board/logicpd/zoom3/led.c | 133 ++++++++++++++++++ board/logicpd/zoom3/zoom3.c | 201 ++++++++++++++++++++++++++ board/logicpd/zoom3/zoom3.h | 163 ++++++++++++++++++++++ board/logicpd/zoom3/zoom3_serial.c | 132 +++++++++++++++++ board/logicpd/zoom3/zoom3_serial.h | 76 ++++++++++ common/serial.c | 2 + include/configs/omap3_zoom3.h | 271 ++++++++++++++++++++++++++++++++++++ include/serial.h | 7 + 14 files changed, 1146 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/zoom3/Makefile create mode 100644 board/logicpd/zoom3/config.mk create mode 100644 board/logicpd/zoom3/debug_board.c create mode 100644 board/logicpd/zoom3/led.c create mode 100644 board/logicpd/zoom3/zoom3.c create mode 100644 board/logicpd/zoom3/zoom3.h create mode 100644 board/logicpd/zoom3/zoom3_serial.c create mode 100644 board/logicpd/zoom3/zoom3_serial.h create mode 100644 include/configs/omap3_zoom3.h
MAINTAINERS +4 -0
@@ -798,6 +798,10 @@ Alex Z lart SA1100 dnp1110 SA1110 +Aldo Brett Cedillo Martinez <[email protected]> + + omap3_zoom3 ARM CORTEX-A8 (OMAP3xx SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards:
MAKEALL +1 -0
@@ -650,6 +650,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_sdp3430 \ omap3_zoom1 \ omap3_zoom2 \ + omap3_zoom3 \ smdkc100 \ "
Makefile +3 -0
@@ -3179,6 +3179,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +omap3_zoom3_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom3 logicpd omap3 + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
board/logicpd/zoom3/Makefile new file +54 -0
54 lines not on this page · raw message
board/logicpd/zoom3/config.mk new file +33 -0
@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# Texas Instruments, <www.ti.com> +# +# Zoom II uses OMAP3 (ARM-CortexA8) CPU +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 0x80000000 (bank0) +# 0xA0000000 (bank1) +# Linux-Kernel is expected to be at 0x80008000, entry 0x80008000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
board/logicpd/zoom3/debug_board.c new file +66 -0
66 lines not on this page · raw message
board/logicpd/zoom3/led.c new file +133 -0
133 lines not on this page · raw message
board/logicpd/zoom3/zoom3.c new file +201 -0
201 lines not on this page · raw message
board/logicpd/zoom3/zoom3.h new file +163 -0
163 lines not on this page · raw message
board/logicpd/zoom3/zoom3_serial.c new file +132 -0
132 lines not on this page · raw message
board/logicpd/zoom3/zoom3_serial.h new file +76 -0
76 lines not on this page · raw message
common/serial.c +2 -0
@@ -92,6 +92,8 @@ struct serial_device *__default_serial_console (void)#endif #elif defined(CONFIG_OMAP3_ZOOM2 )return ZOOM2_DEFAULT_SERIAL_DEVICE ; +#elif defined(CONFIG_OMAP3_ZOOM3 ) +return ZOOM3_DEFAULT_SERIAL_DEVICE ;#else #error No default console#endif
include/configs/omap3_zoom3.h new file +271 -0
271 lines not on this page · raw message
include/serial.h +7 -0
@@ -66,6 +66,13 @@ extern struct serial_device zoom2_serial_device2;extern struct serial_device zoom2_serial_device3;#endif +#if defined(CONFIG_OMAP3_ZOOM3 ) +extern struct serial_device zoom3_serial_device0; +extern struct serial_device zoom3_serial_device1; +extern struct serial_device zoom3_serial_device2; +extern struct serial_device zoom3_serial_device3; +#endif +extern struct serial_device serial_ffuart_device;extern struct serial_device serial_btuart_device;extern struct serial_device serial_stuart_device;
Signature · 1 line
1.6.3.3
Paulraj
PATCH v2 1/1 Zoom3: Add support for OMAP3630 Zoom3 board.
Quoted 26 lines
From: Aldo Brett Cedillo Martinez <[email protected]>
This patch gives basic funcionality to OMAP3630 Zoom3 board.
Signed-off-by Aldo Brett Cedillo Martinez <[email protected]>--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/logicpd/zoom3/Makefile | 54 +++++++ board/logicpd/zoom3/config.mk | 33 +++++ board/logicpd/zoom3/debug_board.c | 66 +++++++++ board/logicpd/zoom3/led.c | 133 ++++++++++++++++++ board/logicpd/zoom3/zoom3.c | 201 ++++++++++++++++++++++++++ board/logicpd/zoom3/zoom3.h | 163 ++++++++++++++++++++++ board/logicpd/zoom3/zoom3_serial.c | 132 +++++++++++++++++ board/logicpd/zoom3/zoom3_serial.h | 76 ++++++++++ common/serial.c | 2 + include/configs/omap3_zoom3.h | 271 ++++++++++++++++++++++++++++++++++++ include/serial.h | 7 + 14 files changed, 1146 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/zoom3/Makefile
Quoted 8 lines
create mode 100644 board/logicpd/zoom3/config.mk create mode 100644 board/logicpd/zoom3/debug_board.c create mode 100644 board/logicpd/zoom3/led.c create mode 100644 board/logicpd/zoom3/zoom3.c create mode 100644 board/logicpd/zoom3/zoom3.h create mode 100644 board/logicpd/zoom3/zoom3_serial.c create mode 100644 board/logicpd/zoom3/zoom3_serial.h create mode 100644 include/configs/omap3_zoom3.h
This patch had 31 checkpatch errors.
Please fix.
Also while resubmitting, the patch should be against u-boot/next
Thanks,
Sandeep