broadcom: Add 5241 support
Subsystems (4)
PATCH 1/1 broadcom: Add 5241 support
This patch adds the 5241 PHY ID to the broadcom module.
Signed-off-by Dmitry Eremin-Solenikov <[email protected]>
--- drivers/net/phy/broadcom.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
drivers/net/phy/broadcom.c +21 -0
@@ -834,6 +834,21 @@ static struct phy_driver bcmac131_driver = { .driver = { .owner = THIS_MODULE }, }; +static struct phy_driver bcm5241_driver = { + .phy_id =0x0143bc30 , + .phy_id_mask =0xfffffff0 , + .name ="Broadcom BCM5241" , + .features =PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags =PHY_HAS_MAGICANEG |PHY_HAS_INTERRUPT , + .config_init = brcm_fet_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = brcm_fet_ack_interrupt, + .config_intr = brcm_fet_config_intr, + .driver = { .owner =THIS_MODULE }, +}; +static int __init broadcom_init (void ) {int ret;
@@ -868,8 +883,13 @@ static int __init broadcom_init(void) ret =phy_driver_register (&bcmac131_driver);if (ret) goto out_ac131; + ret =phy_driver_register (&bcm5241_driver); +if (ret) + goto out_5241;return ret; +out_5241: +phy_driver_unregister (&bcmac131_driver); out_ac131:phy_driver_unregister (&bcm57780_driver); out_57780:
@@ -894,6 +914,7 @@ out_5411: static void __exit broadcom_exit(void) { +phy_driver_unregister (&bcm5241_driver);phy_driver_unregister (&bcmac131_driver);phy_driver_unregister (&bcm57780_driver);phy_driver_unregister (&bcm50610m_driver);
Signature · 1 line
1.7.1
Quoted 1 line · Dmitry Eremin-Solenikov
This patch adds the 5241 PHY ID to the broadcom module.
[...]
You need to add the ID and mask to the module device ID table (broadcom_tbl) as well.
Ben.
Signature · 3 lines
Ben Hutchings, Senior Software Engineer, Solarflare Communications Not speaking for my employer; that's the marketing department's job. They asked us to note that Solarflare product names are trademarked.