qdev-properties: Fix (u)intXX parsers

scanf calls must not use PRI constants, they have probably the wrong size and corrupt memory. We could replace them by SCN ones, but strtol is simpler than scanf here anyway. While at it, also fix the parsers to reject garbage after the number ("4096xyz" was accepted before).

Signed-off-by Kevin Wolf <[email protected]>

---
 hw/qdev-properties.c |   50 +++++++++++++++++++++++++++++++++++---------------
 1 files changed, 35 insertions(+), 15 deletions(-)

scanf calls must not use PRI constants, they have probably the wrong size and corrupt memory. We could replace them by SCN ones, but strtol is simpler than scanf here anyway. While at it, also fix the parsers to reject garbage after the number ("4096xyz" was accepted before).

Signed-off-by Kevin Wolf <[email protected]>

scanf calls must not use PRI constants, they have probably the wrong size and corrupt memory. We could replace them by SCN ones, but strtol is simpler than scanf here anyway. While at it, also fix the parsers to reject garbage after the number ("4096xyz" was accepted before).

Signed-off-by Kevin Wolf <[email protected]>

---
 hw/qdev-properties.c |   50 +++++++++++++++++++++++++++++++++++---------------
 1 files changed, 35 insertions(+), 15 deletions(-)

hw/qdev-properties.c +35 -15

index 5a8739d..5b7fd77 100644
@@ -67,12 +67,14 @@ PropertyInfo qdev_prop_bit = {
 static int parse_uint8(DeviceState *dev, Property *prop, const char *str)
 {
     uint8_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
     /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx8 : "%" PRIu8;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str, &end, 0);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -95,12 +97,14 @@ PropertyInfo qdev_prop_uint8 = {
 static int parse_uint16(DeviceState *dev, Property *prop, const char *str)
 {
     uint16_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
     /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx16 : "%" PRIu16;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str, &end, 0);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -123,12 +127,14 @@ PropertyInfo qdev_prop_uint16 = {
 static int parse_uint32(DeviceState *dev, Property *prop, const char *str)
 {
     uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
     /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx32 : "%" PRIu32;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str, &end, 0);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -149,9 +155,13 @@ PropertyInfo qdev_prop_uint32 = {
 static int parse_int32(DeviceState *dev, Property *prop, const char *str)
 {
     int32_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRId32, ptr) != 1)
+    *ptr = strtol(str, &end, 10);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -174,9 +184,13 @@ PropertyInfo qdev_prop_int32 = {
 static int parse_hex32(DeviceState *dev, Property *prop, const char *str)
 {
     uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRIx32, ptr) != 1)
+    *ptr = strtoul(str, &end, 16);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -199,12 +213,14 @@ PropertyInfo qdev_prop_hex32 = {
 static int parse_uint64(DeviceState *dev, Property *prop, const char *str)
 {
     uint64_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
     /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx64 : "%" PRIu64;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoull(str, &end, 0);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

@@ -227,9 +243,13 @@ PropertyInfo qdev_prop_uint64 = {
 static int parse_hex64(DeviceState *dev, Property *prop, const char *str)
 {
     uint64_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRIx64, ptr) != 1)
+    *ptr = strtoull(str, &end, 16);
+    if ((*end != '\0') || (end == str)) {
         return -EINVAL;
+    }
+
     return 0;
 }
 

Signature · 1 line

1.6.6.1

scanf calls must not use PRI constants, they have probably the wrong size and corrupt memory. We could replace them by SCN ones, but strtol is simpler than scanf here anyway. While at it, also fix the parsers to reject garbage after the number ("4096xyz" was accepted before).

Signed-off-by Kevin Wolf<[email protected]>

---
  hw/qdev-properties.c |   50 +++++++++++++++++++++++++++++++++++---------------
  1 files changed, 35 insertions(+), 15 deletions(-)

hw/qdev-properties.c +35 -15

index 5a8739d..5b7fd77 100644
@@ -67,12 +67,14 @@ PropertyInfo qdev_prop_bit = {
  static int parse_uint8(DeviceState *dev, Property *prop, const char *str)
  {
      uint8_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
      /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx8 : "%" PRIu8;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str,&end, 0);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -95,12 +97,14 @@ PropertyInfo qdev_prop_uint8 = {
  static int parse_uint16(DeviceState *dev, Property *prop, const char *str)
  {
      uint16_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
      /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx16 : "%" PRIu16;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str,&end, 0);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -123,12 +127,14 @@ PropertyInfo qdev_prop_uint16 = {
  static int parse_uint32(DeviceState *dev, Property *prop, const char *str)
  {
      uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
      /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx32 : "%" PRIu32;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoul(str,&end, 0);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -149,9 +155,13 @@ PropertyInfo qdev_prop_uint32 = {
  static int parse_int32(DeviceState *dev, Property *prop, const char *str)
  {
      int32_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRId32, ptr) != 1)
+    *ptr = strtol(str,&end, 10);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -174,9 +184,13 @@ PropertyInfo qdev_prop_int32 = {
  static int parse_hex32(DeviceState *dev, Property *prop, const char *str)
  {
      uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRIx32, ptr) != 1)
+    *ptr = strtoul(str,&end, 16);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -199,12 +213,14 @@ PropertyInfo qdev_prop_hex32 = {
  static int parse_uint64(DeviceState *dev, Property *prop, const char *str)
  {
      uint64_t *ptr = qdev_get_prop_ptr(dev, prop);
-    const char *fmt;
+    char *end;
 
      /* accept both hex and decimal */
-    fmt = strncasecmp(str, "0x",2) == 0 ? "%" PRIx64 : "%" PRIu64;
-    if (sscanf(str, fmt, ptr) != 1)
+    *ptr = strtoull(str,&end, 0);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }
 

@@ -227,9 +243,13 @@ PropertyInfo qdev_prop_uint64 = {
  static int parse_hex64(DeviceState *dev, Property *prop, const char *str)
  {
      uint64_t *ptr = qdev_get_prop_ptr(dev, prop);
+    char *end;
 
-    if (sscanf(str, "%" PRIx64, ptr) != 1)
+    *ptr = strtoull(str,&end, 16);
+    if ((*end != '\0') || (end == str)) {
          return -EINVAL;
+    }
+
      return 0;
  }