Staging: comedi: fix code style errors in s626.c
PATCH 1/2 Staging: comedi: fix code style errors in s626.c
From: John Sheehan <[email protected]>
A patch for s626.c to fix errors reported by
checkpatch.pl tool, namely,
-code indent should use tabs where possible
-"foo * bar" should be "foo *bar"
-trailing statements should be on next line
Signed-off-by John Sheehan <[email protected]>
--- drivers/staging/comedi/drivers/s626.c | 67 +++++++++++++++++++-------------- 1 files changed, 39 insertions(+), 28 deletions(-)
drivers/staging/comedi/drivers/s626.c +39 -28
@@ -60,10 +60,10 @@ INSN_CONFIG instructions:insn.insn=INSN_CONFIG; //configuration instruction insn.n=1; //number of operation (must be 1) insn.data=&initialvalue; //initial value loaded into encoder -//during configuration +//during configuration insn.subdev=5; //encoder subdevice insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel -//to configure +//to configure comedi_do_insn(cf,&insn); //executing configuration */
@@ -299,7 +299,7 @@ static int s626_enc_insn_write(struct comedi_device *dev,struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);static int s626_ns_to_timer (int *nanosec,int round_mode); -static int s626_ai_load_polllist (uint8_t * ppl,struct comedi_cmd *cmd); +static int s626_ai_load_polllist (uint8_t *ppl,struct comedi_cmd *cmd);static int s626_ai_inttrig (struct comedi_device *dev,struct comedi_subdevice *s,unsigned int trignum);static irqreturn_t s626_irq_handler (int irq,void *d);
@@ -330,16 +330,16 @@ static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,/* COUNTER OBJECT ------------------------------------------------ */ struct enc_private {/* Pointers to functions that differ for A and B counters: */ -uint16_t (*GetEnable) (struct comedi_device * dev,struct enc_private *);/* Return clock enable. */ -uint16_t (*GetIntSrc) (struct comedi_device * dev,struct enc_private *);/* Return interrupt source. */ -uint16_t (*GetLoadTrig) (struct comedi_device * dev,struct enc_private *);/* Return preload trigger source. */ -uint16_t (*GetMode) (struct comedi_device * dev,struct enc_private *);/* Return standardized operating mode. */ -void (*PulseIndex) (struct comedi_device * dev,struct enc_private *);/* Generate soft index strobe. */ -void (*SetEnable) (struct comedi_device * dev,struct enc_private *,uint16_t enab);/* Program clock enable. */ -void (*SetIntSrc) (struct comedi_device * dev,struct enc_private *,uint16_t IntSource);/* Program interrupt source. */ -void (*SetLoadTrig) (struct comedi_device * dev,struct enc_private *,uint16_t Trig);/* Program preload trigger source. */ -void (*SetMode) (struct comedi_device * dev,struct enc_private *,uint16_t Setup,uint16_t DisableIntSrc);/* Program standardized operating mode. */ -void (*ResetCapFlags) (struct comedi_device * dev,struct enc_private *);/* Reset event capture flags. */ +uint16_t (*GetEnable) (struct comedi_device *dev,struct enc_private *);/* Return clock enable. */ +uint16_t (*GetIntSrc) (struct comedi_device *dev,struct enc_private *);/* Return interrupt source. */ +uint16_t (*GetLoadTrig) (struct comedi_device *dev,struct enc_private *);/* Return preload trigger source. */ +uint16_t (*GetMode) (struct comedi_device *dev,struct enc_private *);/* Return standardized operating mode. */ +void (*PulseIndex) (struct comedi_device *dev,struct enc_private *);/* Generate soft index strobe. */ +void (*SetEnable) (struct comedi_device *dev,struct enc_private *,uint16_t enab);/* Program clock enable. */ +void (*SetIntSrc) (struct comedi_device *dev,struct enc_private *,uint16_t IntSource);/* Program interrupt source. */ +void (*SetLoadTrig) (struct comedi_device *dev,struct enc_private *,uint16_t Trig);/* Program preload trigger source. */ +void (*SetMode) (struct comedi_device *dev,struct enc_private *,uint16_t Setup,uint16_t DisableIntSrc);/* Program standardized operating mode. */ +void (*ResetCapFlags) (struct comedi_device *dev,struct enc_private *);/* Reset event capture flags. */ uint16_t MyCRA;/* Address of CRA register. */ uint16_t MyCRB;/* Address of CRB register. */
@@ -815,7 +815,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)/* Write I2C control: abort any I2C activity. */ MC_ENABLE (P_MC2 ,MC2_UPLD_IIC );/* Invoke command upload */ -while ((RR7146 (P_MC2 ) &MC2_UPLD_IIC ) ==0 ) ; +while ((RR7146 (P_MC2 ) &MC2_UPLD_IIC ) ==0 ) + ;/* and wait for upload to complete. */ /* Per SAA7146 data sheet, write to STATUS reg twice to
@@ -824,7 +825,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)WR7146 (P_I2CSTAT ,I2C_CLKSEL );/* Write I2C control: reset error flags. */ MC_ENABLE (P_MC2 ,MC2_UPLD_IIC );/* Invoke command upload */ -while (!MC_TEST (P_MC2 ,MC2_UPLD_IIC )) ; +while (!MC_TEST (P_MC2 ,MC2_UPLD_IIC )) + ;/* and wait for upload to complete. */ }
@@ -1687,7 +1689,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,/* shift into FB BUFFER 1 register. */ /* Wait for ADC done. */ -while (!(RR7146 (P_PSR ) &PSR_GPIO2 )) ; +while (!(RR7146 (P_PSR ) &PSR_GPIO2 )) + ;/* Fetch ADC data. */ if (n !=0 )
@@ -1719,7 +1722,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,/* Wait for the data to arrive in FB BUFFER 1 register. */ /* Wait for ADC done. */ -while (!(RR7146 (P_PSR ) &PSR_GPIO2 )) ; +while (!(RR7146 (P_PSR ) &PSR_GPIO2 )) + ;/* Fetch ADC data from audio interface's input shift register. */
@@ -1732,7 +1736,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,return n; } -static int s626_ai_load_polllist (uint8_t * ppl,struct comedi_cmd *cmd) +static int s626_ai_load_polllist (uint8_t *ppl,struct comedi_cmd *cmd) {int n;
@@ -2461,8 +2465,7 @@ static void s626_timer_load(struct comedi_device *dev, struct enc_private *k,static uint8_t trimchan[] = {10 ,9 ,8 ,3 ,2 ,7 ,6 ,1 ,0 ,5 ,4 };/* TrimDac LogicalChan-to-EepromAdrs mapping table. */ -static uint8_t trimadrs[] = - {0x40 ,0x41 ,0x42 ,0x50 ,0x51 ,0x52 ,0x53 ,0x60 ,0x61 ,0x62 ,0x63 }; +static uint8_t trimadrs[] = {0x40 ,0x41 ,0x42 ,0x50 ,0x51 ,0x52 ,0x53 ,0x60 ,0x61 ,0x62 ,0x63 };static void LoadTrimDACs (struct comedi_device *dev) {
@@ -2560,10 +2563,12 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)/* upload confirmation. */ MC_ENABLE (P_MC2 ,MC2_UPLD_IIC ); -while (!MC_TEST (P_MC2 ,MC2_UPLD_IIC )) ; +while (!MC_TEST (P_MC2 ,MC2_UPLD_IIC )) + ;/* Wait until I2C bus transfer is finished or an error occurs. */ -while ((RR7146 (P_I2CCTRL ) & (I2C_BUSY |I2C_ERR )) ==I2C_BUSY ) ; +while ((RR7146 (P_I2CCTRL ) & (I2C_BUSY |I2C_ERR )) ==I2C_BUSY ) + ;/* Return non-zero if I2C error occured. */ return RR7146 (P_I2CCTRL ) &I2C_ERR ;
@@ -2677,7 +2682,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)* Done by polling the DMAC enable flag; this flag is automatically * cleared when the transfer has finished. */ -while ((RR7146 (P_MC1 ) &MC1_A2OUT ) !=0 ) ; +while ((RR7146 (P_MC1 ) &MC1_A2OUT ) !=0 ) + ;/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
@@ -2694,7 +2700,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)* finished transferring the DAC's data DWORD from the output FIFO * to the output buffer register. */ -while ((RR7146 (P_SSR ) &SSR_AF2_OUT ) ==0 ) ; +while ((RR7146 (P_SSR ) &SSR_AF2_OUT ) ==0 ) + ;/* Set up to trap execution at slot 0 when the TSL sequencer cycles * back to slot 0 after executing the EOS in slot 5. Also,
@@ -2730,7 +2737,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)* from 0xFF to 0x00, which slot 0 causes to happen by shifting * out/in on SD2 the 0x00 that is always referenced by slot 5. */ -while ((RR7146 (P_FB_BUFFER2 ) &0xFF000000 ) !=0 ) ; +while ((RR7146 (P_FB_BUFFER2 ) &0xFF000000 ) !=0 ) + ; }/* Either (1) we were too late setting the slot 0 trap; the TSL * sequencer restarted slot 0 before we could set the EOS trap flag,
@@ -2746,7 +2754,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)* the next DAC write. This is detected when FB_BUFFER2 MSB changes * from 0x00 to 0xFF. */ -while ((RR7146 (P_FB_BUFFER2 ) &0xFF000000 ) ==0 ) ; +while ((RR7146 (P_FB_BUFFER2 ) &0xFF000000 ) ==0 ) + ; }static void WriteMISC2 (struct comedi_device *dev,uint16_t NewImage)
@@ -2785,10 +2794,12 @@ static void DEBItransfer(struct comedi_device *dev)/* Wait for completion of upload from shadow RAM to DEBI control */ /* register. */ -while (!MC_TEST (P_MC2 ,MC2_UPLD_DEBI )) ; +while (!MC_TEST (P_MC2 ,MC2_UPLD_DEBI )) + ;/* Wait until DEBI transfer is done. */ -while (RR7146 (P_PSR ) &PSR_DEBI_S ) ; +while (RR7146 (P_PSR ) &PSR_DEBI_S ) + ; }/* Write a value to a gate array register. */
Signature · 1 line
1.7.0.4