Skip to contentSkip to conversation

eukrea_mbimxsd: factorize motherboard support

PATCH New Eric Bénard 1 participant 1 message Jun 25, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Eric Bénard

author
#0 lore raw

PATCH 1/1 eukrea_mbimxsd: factorize motherboard support

This motherboard is used for both an i.MX25 and an i.MX35 machines so we can have only one file to support it in plat-mxc.

Signed-off-by Eric B?nard <[email protected]>
---
 arch/arm/mach-mx25/Kconfig                         |   14 -
 arch/arm/mach-mx25/Makefile                        |    1 -
 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c      |  260 --------------------
 arch/arm/mach-mx25/mach-cpuimx25.c                 |    2 +-
 arch/arm/mach-mx3/Kconfig                          |   14 -
 arch/arm/mach-mx3/Makefile                         |    1 -
 arch/arm/mach-mx3/mach-cpuimx35.c                  |    2 +-
 arch/arm/plat-mxc/Kconfig                          |    8 +
 arch/arm/plat-mxc/Makefile                         |    1 +
 .../eukrea_mbimxsd-baseboard.c                     |  176 +++++++++++---
 .../plat-mxc/include/mach/board-eukrea_cpuimx35.h  |   40 ---
 ...d-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} |   10 +-
 12 files changed, 158 insertions(+), 371 deletions(-)
 delete mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
 rename arch/arm/{mach-mx3 => plat-mxc}/eukrea_mbimxsd-baseboard.c (70%)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
 rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} (83%)
arch/arm/mach-mx25/Kconfig +0 -14
index 3a6668e..af982cd 100644
@@ -9,18 +9,4 @@ config MACH_EUKREA_CPUIMX25
 	bool "Support Eukrea CPUIMX25 Platform"
 	select MXC_ULPI if USB_ULPI
 
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25
-	default MACH_EUKREA_MBIMXSD_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 endif
arch/arm/mach-mx25/Makefile +0 -1
index 83ab5d8..71302d4 100644
@@ -2,4 +2,3 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
 obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c deleted +0 -260

260 lines not on this page · raw message

arch/arm/mach-mx25/mach-cpuimx25.c +1 -1
index 4796484..2e85d59 100644
@@ -29,7 +29,7 @@
 #include <linux/usb/ulpi.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/board-eukrea_cpuimx25.h>
+#include <mach/board-eukrea_cpuimxsd.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
arch/arm/mach-mx3/Kconfig +0 -14
index b09e9a9..5bb9f6e 100644
@@ -133,18 +133,4 @@ config MACH_EUKREA_CPUIMX35
 	  Include support for Eukrea CPUIMX35 platform. This includes
 	  specific configurations for the board and its peripherals.
 
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
-	default MACH_EUKREA_MBIMXSD_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 endif
arch/arm/mach-mx3/Makefile +0 -1
index ef68ff5..5a2525d 100644
@@ -25,4 +25,3 @@ obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
arch/arm/mach-mx3/mach-cpuimx35.c +1 -1
index 55caa5c..56e5bf0 100644
@@ -37,7 +37,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-eukrea_cpuimx35.h>
+#include <mach/board-eukrea_cpuimxsd.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
arch/arm/plat-mxc/Kconfig +8 -0
index 902ba9e..9df2706 100644
@@ -82,6 +82,14 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MACH_EUKREA_MBIMXSD_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	depends on MACH_EUKREA_CPUIMX25 || MACH_EUKREA_CPUIMX35
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
 config MXC_ULPI
 	bool
arch/arm/plat-mxc/Makefile +1 -0
index 895bc3c..2cc2d5c 100644
@@ -21,3 +21,4 @@ ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c renamed from arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +142 -34

227 lines not on this page · raw message

arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h deleted +0 -40
deleted file mode 100644
index 116eee7..0000000
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric at eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init().
- *
- * This example here is for the development board. Refer
- * eukrea_mbimx25-baseboard.c
- */
-
-extern void eukrea_mbimxsd_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__ */
arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h renamed from arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h +5 -5
similarity index 83%
rename from arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h
rename to arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
index 5c9901e..96789b1 100644
@@ -19,22 +19,22 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__
 
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init().
  *
  * This example here is for the development board. Refer
- * eukrea_mbimx25-baseboard.c
+ * eukrea_mbimxsd-baseboard.c
  */
 
 extern void eukrea_mbimxsd_baseboard_init(void);
 
 #endif
 
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__ */
Signature · 1 line
1.6.3.3