Skip to contentSkip to conversation

(stupid) how to specify the root-device via kernel parameters

DISCUSSION Christoph Anton Mitterer 2 participants 3 messages Jun 26, 2010

lore
Share & tools
lore
#0 lore raw

Hi,...

Ok this might sound really stupid, but I've seen several ways of doing this and want to get this cleaned up.

Nevertheless....

kernel-parameters.txt has the following options where you can specify the root-fs and related flags:
root= [KNL] Root filesystem
nfsroot= [NFS] nfs root filesystem for disk-less boxes.

Plus further options like: ro, rootdelay=, rootflags=, rootfstype=, rootwait, etc.

My question:
These are intended (especially root/nfsroot) to really name the device, on which the filesystem directly lays, right?
E.g. if the ext4-root-fs is on /dev/sda1,... => root=/dev/sda1

I've seen several initramfs scripts (which I'd like to fix),... where people abuse this or misuse this in setups where a root-fs is used on multi-stacked block layers (e.g. something like disk->lvm->dm-crypt->fs)

Cheers,
Chris.

#1 lore raw
Quoted 9 lines · Christoph Anton Mitterer

My question:
These are intended (especially root/nfsroot) to really name the device, on which the filesystem directly lays, right?
E.g. if the ext4-root-fs is on /dev/sda1,... => root=/dev/sda1

I've seen several initramfs scripts (which I'd like to fix),... where people abuse this or misuse this in setups where a root-fs is used on multi-stacked block layers (e.g. something like disk->lvm->dm-crypt->fs)

Abuse this how? What do you think is "wrong"?

- Ted

#2 lore raw
Quoted 1 line · On Sat, 2010-06-26 at 09:46 -0400, [email protected] wrote:

Abuse this how? What do you think is "wrong"?

Uhm... not totally sure as I only had a first short glance on it (so I hope not to step on Bastian's toes ;) )... but the lvm2 initramfs-script from Debian's lvm2 package somehow to set up the VGs/LVs... which is fine, expect you have fully encrypted fs (with boot on USB stick),... and you have a dm-crypt device on top of LVM.
Not sure why he simply doesn't do a vgchange -an or so,.. but will ask him.

Then my root is /dev/mapper/root or so,... and the script has it's problem.

Cheers,
Chris.