Skip to contentSkip to conversation

Voipac PXA270 LCD Support

PATCH New Marek Vasut 2 participants 7 messages Jul 6, 2010

Subsystems (3)
Arm (32-bit) Kbuild Arm/actions semi architecture
lore
Share & tools
lore

Marek Vasut

author
#0 lore raw

PATCH 1/5 Voipac PXA270 LCD Support

Signed-off-by Marek Vasut <[email protected]>
---
 arch/arm/cpu/pxa/pxafb.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
arch/arm/cpu/pxa/pxafb.c +33 -0
index d56c5f0..0bd52d4 100644
@@ -112,6 +112,39 @@ vidinfo_t panel_info = {
 	vl_efw:		0,
 };
 #endif /* CONFIG_SHARP_LM8V31 */
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_VOIPAC_LCD
+
+# define LCD_BPP	LCD_COLOR8
+# define LCD_INVERT_COLORS
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0	0x043008f8
+# define REG_LCCR3	0x0340FF08
+
+vidinfo_t panel_info = {
+	vl_col:		640,
+	vl_row:		480,
+	vl_width:	157,
+	vl_height:	118,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
+	vl_bpix:	LCD_BPP,
+	vl_lbw:		0,
+	vl_splt:	1,
+	vl_clor:	1,
+	vl_tft:		1,
+	vl_hpw:		32,
+	vl_blw:		144,
+	vl_elw:		32,
+	vl_vpw:		2,
+	vl_bfw:		13,
+	vl_efw:		30,
+};
+#endif /* CONFIG_VOIPAC_LCD */
 
 /*----------------------------------------------------------------------*/
 #ifdef CONFIG_HITACHI_SX14
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH 2/5 PXA: Add support for LMS285GF05 into pxafb

Signed-off-by Marek Vasut <[email protected]>
---
 arch/arm/cpu/pxa/pxafb.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)
arch/arm/cpu/pxa/pxafb.c +34 -0
index 0bd52d4..b2d332c 100644
@@ -180,6 +180,40 @@ vidinfo_t panel_info = {
 #endif /* CONFIG_HITACHI_SX14 */
 
 /*----------------------------------------------------------------------*/
+#ifdef CONFIG_LMS283GF05
+
+# define LCD_BPP	LCD_COLOR8
+//# define LCD_INVERT_COLORS
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0	0x043008f8
+# define REG_LCCR3	0x03b00009
+
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_width:	240,
+	vl_height:	320,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_LOW,
+	vl_hsp:		CONFIG_SYS_LOW,
+	vl_vsp:		CONFIG_SYS_LOW,
+	vl_dp:		CONFIG_SYS_HIGH,
+	vl_bpix:	LCD_BPP,
+	vl_lbw:		0,
+	vl_splt:	1,
+	vl_clor:	1,
+	vl_tft:		1,
+	vl_hpw:		4,
+	vl_blw:		4,
+	vl_elw:		8,
+	vl_vpw:		4,
+	vl_bfw:		4,
+	vl_efw:		8,
+};
+#endif /* CONFIG_LMS283GF05 */
+
+/*----------------------------------------------------------------------*/
 
 #if LCD_BPP == LCD_COLOR8
 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
Signature · 1 line
1.7.1
author
#2 lore raw

PATCH 3/5 PXA: Voipac PXA270 Support

In reply to Marek Vasut

This patch adds support for the Voipac PXA270 board. The support includes:
- Ethernet
- USB
- MMC
- NOR Booting
- OneNAND Booting
- LCD
- HDD

Signed-off-by Marek Vasut <[email protected]>
---
 MAKEALL                                      |    2 +
 Makefile                                     |    9 +
 board/vpac270/Makefile                       |   48 ++++
 board/vpac270/config.mk                      |    1 +
 board/vpac270/lowlevel_init.S                |   40 +++
 board/vpac270/u-boot.lds                     |   55 +++++
 board/vpac270/vpac270.c                      |  127 ++++++++++
 include/configs/vpac270.h                    |  328 ++++++++++++++++++++++++++
 onenand_ipl/board/vpac270/Makefile           |   83 +++++++
 onenand_ipl/board/vpac270/config.mk          |    1 +
 onenand_ipl/board/vpac270/lowlevel_init.S    |   34 +++
 onenand_ipl/board/vpac270/u-boot.onenand.lds |   51 ++++
 onenand_ipl/board/vpac270/vpac270.c          |   42 ++++
 13 files changed, 821 insertions(+), 0 deletions(-)
 create mode 100644 board/vpac270/Makefile
 create mode 100644 board/vpac270/config.mk
 create mode 100644 board/vpac270/lowlevel_init.S
 create mode 100644 board/vpac270/u-boot.lds
 create mode 100644 board/vpac270/vpac270.c
 create mode 100644 include/configs/vpac270.h
 create mode 100644 onenand_ipl/board/vpac270/Makefile
 create mode 100644 onenand_ipl/board/vpac270/config.mk
 create mode 100644 onenand_ipl/board/vpac270/lowlevel_init.S
 create mode 100644 onenand_ipl/board/vpac270/u-boot.onenand.lds
 create mode 100644 onenand_ipl/board/vpac270/vpac270.c
MAKEALL +2 -0
index 4637390..b5a6ee1 100755
@@ -711,6 +711,8 @@ LIST_pxa="		\
 	polaris		\
 	pxa255_idp	\
 	trizepsiv	\
+	vpac270_nor	\
+	vpac270_onenand	\
 	wepep250	\
 	xaeniax		\
 	xm250		\
Makefile +9 -0
index 1d87f37..07ab532 100644
@@ -2171,6 +2171,15 @@ trizepsiv_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
 
+vpac270_nor_config \
+vpac270_onenand_config	: unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring onenand,$@)" ] ; then \
+		echo "#define CONFIG_ONENAND_U_BOOT" \
+			>>$(obj)include/config.h ; \
+	fi;
+	@$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270
+
 #########################################################################
 ## ARM1136 Systems
 #########################################################################
board/vpac270/Makefile new file +48 -0

48 lines not on this page · raw message

board/vpac270/config.mk new file +1 -0
new file mode 100644
index 0000000..1d650ac
@@ -0,0 +1 @@
+TEXT_BASE = 0xa1000000
board/vpac270/lowlevel_init.S new file +40 -0
new file mode 100644
index 0000000..ec0d12c
@@ -0,0 +1,40 @@
+/*
+ * Voipac PXA270 Lowlevel Hardware Initialization
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/macro.h>
+
+.globl lowlevel_init
+lowlevel_init:
+	pxa_gpio_setup
+	pxa_wait_ticks	0x8000
+	pxa_mem_setup
+	pxa_wakeup
+	pxa_intr_setup
+	pxa_clock_setup
+
+	mov	pc, lr
board/vpac270/u-boot.lds new file +55 -0

55 lines not on this page · raw message

board/vpac270/vpac270.c new file +127 -0

127 lines not on this page · raw message

include/configs/vpac270.h new file +328 -0

328 lines not on this page · raw message

onenand_ipl/board/vpac270/Makefile new file +83 -0

83 lines not on this page · raw message

onenand_ipl/board/vpac270/config.mk new file +1 -0
new file mode 100644
index 0000000..f071dea
@@ -0,0 +1 @@
+TEXT_BASE = 0x5c03fc00
onenand_ipl/board/vpac270/lowlevel_init.S new file +34 -0
new file mode 100644
index 0000000..e79d8dd
@@ -0,0 +1,34 @@
+/*
+ * Voipac PXA270 Lowlevel Hardware Initialization
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/macro.h>
+
+.globl lowlevel_init
+lowlevel_init:
+	pxa_clock_setup
+	mov	pc, lr
onenand_ipl/board/vpac270/u-boot.onenand.lds new file +51 -0

51 lines not on this page · raw message

onenand_ipl/board/vpac270/vpac270.c new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
1.7.1
#3 lore raw

PATCH 3/5 PXA: Voipac PXA270 Support

Hi Marek,

Quoted 12 lines · Marek Vasut

This patch adds support for the Voipac PXA270 board. The support includes:
- Ethernet
- USB
- MMC
- NOR Booting
- OneNAND Booting
- LCD
- HDD

Signed-off-by Marek Vasut<[email protected]>

---

<snip>

include/configs/vpac270.h line 115

Quoted 7 lines
include/configs/vpac270.h new file +6 -0
+#define	CONFIG_NETMASK			255.255.255.0
+#define	CONFIG_IPADDR			192.168.1.52
+#define	CONFIG_SERVERIP			192.168.1.51
+#define	CONFIG_ETHADDR			00:11:22:33:44:55
+#endif
+

Please remove these. The same goes for the other boards.

regards,
Ben

author
#4 lore raw

PATCH 3/5 PXA: Voipac PXA270 Support

Dne ?t 6. ?ervence 2010 20:41:56 Ben Warren napsal(a):

Quoted 17 lines

Hi Marek,

Quoted 11 lines · Marek Vasut

This patch adds support for the Voipac PXA270 board. The support
includes: - Ethernet
- USB
- MMC
- NOR Booting
- OneNAND Booting
- LCD
- HDD

Signed-off-by Marek Vasut<[email protected]>

---

<snip>

Quoted 8 lines

include/configs/vpac270.h line 115

Quoted 6 lines
include/configs/vpac270.h new file +6 -0
+#define	CONFIG_NETMASK			255.255.255.0
+#define	CONFIG_IPADDR			192.168.1.52
+#define	CONFIG_SERVERIP			192.168.1.51
+#define	CONFIG_ETHADDR			00:11:22:33:44:55
+#endif
+

Please remove these. The same goes for the other boards.

Ok, removed. I pushed the new patches without this into -next-plat. Thanks

Quoted 3 lines

regards,
Ben

author
#5 lore raw

PATCH 4/5 PXA: Toradex Colibri PXA270 support

In reply to Marek Vasut
Signed-off-by Marek Vasut <[email protected]>
---
 MAKEALL                               |    1 +
 board/colibri_pxa270/Makefile         |   45 +++++
 board/colibri_pxa270/colibri_pxa270.c |  118 ++++++++++++++
 board/colibri_pxa270/config.mk        |    1 +
 board/colibri_pxa270/lowlevel_init.S  |   36 ++++
 boards.cfg                            |    1 +
 include/configs/colibri_pxa270.h      |  283 +++++++++++++++++++++++++++++++++
 7 files changed, 485 insertions(+), 0 deletions(-)
 create mode 100644 board/colibri_pxa270/Makefile
 create mode 100644 board/colibri_pxa270/colibri_pxa270.c
 create mode 100644 board/colibri_pxa270/config.mk
 create mode 100644 board/colibri_pxa270/lowlevel_init.S
 create mode 100644 include/configs/colibri_pxa270.h
MAKEALL +1 -0
index b5a6ee1..0e0e960 100755
@@ -702,6 +702,7 @@ LIST_at91="			\
 
 LIST_pxa="		\
 	cerf250		\
+	colibri_pxa270	\
 	cradle		\
 	csb226		\
 	delta		\
board/colibri_pxa270/Makefile new file +45 -0

45 lines not on this page · raw message

board/colibri_pxa270/colibri_pxa270.c new file +118 -0

118 lines not on this page · raw message

board/colibri_pxa270/config.mk new file +1 -0
new file mode 100644
index 0000000..1d650ac
@@ -0,0 +1 @@
+TEXT_BASE = 0xa1000000
board/colibri_pxa270/lowlevel_init.S new file +36 -0
new file mode 100644
index 0000000..a43dac2
@@ -0,0 +1,36 @@
+/*
+ * Toradex Colibri PXA270 Lowlevel Hardware Initialization
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/macro.h>
+
+.globl lowlevel_init
+lowlevel_init:
+	pxa_gpio_setup
+	pxa_wait_ticks	0x8000
+	pxa_mem_setup
+	pxa_wakeup
+	pxa_intr_setup
+	pxa_clock_setup
+
+	mov	pc, lr
boards.cfg +1 -0
index da31c36..25c33d5 100644
@@ -52,6 +52,7 @@ actux3		arm	ixp
 actux4		arm	ixp
 ixdp425		arm	ixp
 cerf250		arm	pxa
+colibri_pxa270	arm	pxa
 cradle		arm	pxa
 csb226		arm	pxa
 delta		arm	pxa
include/configs/colibri_pxa270.h new file +283 -0

283 lines not on this page · raw message

Signature · 1 line
1.7.1
author
#6 lore raw

PATCH 5/5 PXA: ZipitZ2 support

In reply to Marek Vasut

This patch adds support for Aeronix Zipit Z2 handheld.

Signed-off-by Marek Vasut <[email protected]>
---
 MAKEALL                       |    1 +
 board/zipitz2/Makefile        |   54 +++++++++
 board/zipitz2/config.mk       |    1 +
 board/zipitz2/lowlevel_init.S |   40 +++++++
 board/zipitz2/u-boot.lds      |   56 +++++++++
 board/zipitz2/zipitz2.c       |  213 +++++++++++++++++++++++++++++++++
 boards.cfg                    |    1 +
 include/configs/zipitz2.h     |  259 +++++++++++++++++++++++++++++++++++++++++
 8 files changed, 625 insertions(+), 0 deletions(-)
 create mode 100644 board/zipitz2/Makefile
 create mode 100644 board/zipitz2/config.mk
 create mode 100644 board/zipitz2/lowlevel_init.S
 create mode 100644 board/zipitz2/u-boot.lds
 create mode 100644 board/zipitz2/zipitz2.c
 create mode 100644 include/configs/zipitz2.h
MAKEALL +1 -0
index 0e0e960..f720b2f 100755
@@ -718,6 +718,7 @@ LIST_pxa="		\
 	xaeniax		\
 	xm250		\
 	xsengine	\
+	zipitz2		\
 	zylonite	\
 "
board/zipitz2/Makefile new file +54 -0

54 lines not on this page · raw message

board/zipitz2/config.mk new file +1 -0
new file mode 100644
index 0000000..1d650ac
@@ -0,0 +1 @@
+TEXT_BASE = 0xa1000000
board/zipitz2/lowlevel_init.S new file +40 -0
new file mode 100644
index 0000000..82a52e8
@@ -0,0 +1,40 @@
+/*
+ * Aeronix Zipit Z2 Lowlevel Hardware Initialization
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/macro.h>
+
+.globl lowlevel_init
+lowlevel_init:
+	pxa_gpio_setup
+	pxa_wait_ticks	0x8000
+	pxa_mem_setup
+	pxa_wakeup
+	pxa_intr_setup
+	pxa_clock_setup
+
+	mov	pc, lr
board/zipitz2/u-boot.lds new file +56 -0

56 lines not on this page · raw message

board/zipitz2/zipitz2.c new file +213 -0

213 lines not on this page · raw message

boards.cfg +1 -0
index 25c33d5..0e73bf4 100644
@@ -62,6 +62,7 @@ lubbock		arm	pxa
 pleb2		arm	pxa
 xaeniax		arm	pxa
 xm250		arm	pxa
+zipitz2		arm	pxa
 B2		arm	s3c44b0		-		dave
 assabet		arm	sa1100
 dnp1110		arm	sa1100
include/configs/zipitz2.h new file +259 -0

259 lines not on this page · raw message

Signature · 1 line
1.7.1