Skip to contentSkip to conversation

ASoC: multi-component - Add Aquila sound driver

PATCH Applied Chanwoo Choi 2 participants 2 messages Jul 20, 2010 – Jul 21, 2010

Subsystems (2)
Sound ASoC
lore
Share & tools
lore

Chanwoo Choi

author
#0 lore raw

PATCH v2 1/1 ASoC: multi-component - Add Aquila sound driver

This patch add sound support for the Aquila board based on S5PC110.

The Aquila board is based on Samsung SoC(S5PC110) and include WM8994 codec over I2S to support sound. This uses the I2Sv4 driver compatible with I2Sv5 to run sound.

The kind of jack is below states :
* SND_JACK_HEADPHONE
* SND_JACK_HEADSET
* SND_JACK_MECHANICAL
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable isn't connected to television.
* SND_JACK_AVOUT
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable is connected to television.

Signed-off-by Chanwoo Choi <[email protected]>
Signed-off-by Joonyoung Shim <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
Acked-by Mark Brown <[email protected]>
---
 sound/soc/s3c24xx/Kconfig         |    9 +
 sound/soc/s3c24xx/Makefile        |    2 +
 sound/soc/s3c24xx/aquila_wm8994.c |  301 +++++++++++++++++++++++++++++++++++++
 3 files changed, 312 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/s3c24xx/aquila_wm8994.c
sound/soc/s3c24xx/Kconfig +9 -0
index 213963a..c09b402 100644
@@ -131,3 +131,12 @@ config SND_S3C64XX_SOC_SMARTQ
 	depends on SND_S3C24XX_SOC && MACH_SMARTQ
 	select SND_S3C64XX_SOC_I2S
 	select SND_SOC_WM8750
+
+config SND_S5PC110_SOC_AQUILA_WM8994
+	tristate "SoC I2S Audio support for AQUILA - WM8994"
+	depends on SND_S3C24XX_SOC && MACH_AQUILA
+	select SND_S3C64XX_SOC_I2S_V4
+	select SND_SOC_WM8994
+	help
+	  Say Y if you want to add support for SoC audio on aquila
+	  with the WM8994.
sound/soc/s3c24xx/Makefile +2 -0
index 50172c3..02dd12c 100644
@@ -30,6 +30,7 @@ snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
 snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
 snd-soc-smdk-wm9713-objs := smdk_wm9713.o
 snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
+snd-soc-aquila-wm8994-objs := aquila_wm8994.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o

@@ -43,3 +44,4 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv32
 obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
 obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
 obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
+obj-$(CONFIG_SND_S5PC110_SOC_AQUILA_WM8994) += snd-soc-aquila-wm8994.o
sound/soc/s3c24xx/aquila_wm8994.c new file +301 -0

301 lines not on this page · raw message

Signature · 1 line
1.6.3.3
Applied
#1 lore raw
Quoted 16 lines · Chanwoo Choi

This patch add sound support for the Aquila board based on S5PC110.

The Aquila board is based on Samsung SoC(S5PC110) and include WM8994 codec over I2S to support sound. This uses the I2Sv4 driver compatible with I2Sv5 to run sound.

The kind of jack is below states :
* SND_JACK_HEADPHONE
* SND_JACK_HEADSET
* SND_JACK_MECHANICAL
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable isn't connected to television.
* SND_JACK_AVOUT
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable is connected to television.

Quoted 4 lines
Signed-off-by Chanwoo Choi <[email protected]>
Signed-off-by Joonyoung Shim <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
Acked-by Mark Brown <[email protected]>

Applied.

Thanks

Liam

Signature · 3 lines
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk