Skip to contentSkip to conversation

Adding rpc server

PATCH In review David Lanzendörfer 3 participants 3 messages Jul 20, 2010 – Jul 22, 2010

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Adding rpc server

Hi Daniel
I've tried to import the SMD server pack into the kernel. But somehow it went wrong.
Any suggestions?

best regards
leviathan

---
 arch/arm/mach-msm/Kconfig                          |   25 +
 arch/arm/mach-msm/Makefile                         |    4 +-
 arch/arm/mach-msm/board-trout-battery.c            |  796 ++++++++++++
 arch/arm/mach-msm/board-trout-hsusb.c              |  352 ++++++
 arch/arm/mach-msm/gpio_chip.h                      |   38 +
 arch/arm/mach-msm/include/mach/board-hsusb.h       |   68 +
 arch/arm/mach-msm/include/mach/board.h             |    2 +
 arch/arm/mach-msm/smd_rpcrouter.c                  | 1310 ++++++++++++++++++++
 arch/arm/mach-msm/smd_rpcrouter.h                  |  195 +++
 arch/arm/mach-msm/smd_rpcrouter_device.c           |  377 ++++++
 arch/arm/mach-msm/smd_rpcrouter_servers.c          |  229 ++++
 drivers/staging/dream/include/mach/msm_rpcrouter.h |    1 +
 12 files changed, 3395 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-msm/board-trout-battery.c
 create mode 100644 arch/arm/mach-msm/board-trout-hsusb.c
 create mode 100644 arch/arm/mach-msm/gpio_chip.h
 create mode 100644 arch/arm/mach-msm/include/mach/board-hsusb.h
 create mode 100644 arch/arm/mach-msm/smd_rpcrouter.c
 create mode 100644 arch/arm/mach-msm/smd_rpcrouter.h
 create mode 100644 arch/arm/mach-msm/smd_rpcrouter_device.c
 create mode 100644 arch/arm/mach-msm/smd_rpcrouter_servers.c
arch/arm/mach-msm/Kconfig +25 -0
index 737cf3e..7eb8722 100644
@@ -1,5 +1,30 @@
 if ARCH_MSM
 
+config MSM_AMSS_VERSION
+        int
+        default 6210 if MSM_AMSS_VERSION_6210
+        default 6220 if MSM_AMSS_VERSION_6220
+        default 6225 if MSM_AMSS_VERSION_6225
+        default 6350 if MSM_AMSS_VERSION_6350
+
+choice
+        prompt "AMSS modem firmware version"
+
+        default MSM_AMSS_VERSION_6225
+
+        config MSM_AMSS_VERSION_6210
+                bool "6.2.10"
+
+        config MSM_AMSS_VERSION_6220
+                bool "6.2.20"
+
+        config MSM_AMSS_VERSION_6225
+                bool "6.2.20 + New ADSP"
+
+        config MSM_AMSS_VERSION_6350
+                bool "6.3.50"
+endchoice
+
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
arch/arm/mach-msm/Makefile +2 -2
index cdd1caf..6f4da0d 100644
@@ -13,10 +13,10 @@ endif
 
 obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
+obj-$(CONFIG_MSM_SMD) += smd_rpcrouter.o smd_rpcrouter_device.o smd_rpcrouter_servers.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-hsusb.o board-trout-battery.o board-trout-panel.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
arch/arm/mach-msm/board-trout-battery.c new file +796 -0

796 lines not on this page · raw message

arch/arm/mach-msm/board-trout-hsusb.c new file +352 -0

352 lines not on this page · raw message

arch/arm/mach-msm/gpio_chip.h new file +38 -0
new file mode 100644
index 0000000..eab9f09
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm/gpio_chip.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_GPIO_CHIP_H
+#define _LINUX_GPIO_CHIP_H
+
+#include <linux/list.h>
+
+struct gpio_chip {
+	struct list_head list;
+	struct gpio_state *state;
+
+	unsigned int start;
+	unsigned int end;
+
+	int (*configure)(struct gpio_chip *chip, unsigned int gpio, unsigned long flags);
+	int (*get_irq_num)(struct gpio_chip *chip, unsigned int gpio, unsigned int *irqp, unsigned long *irqnumflagsp);
+	int (*read)(struct gpio_chip *chip, unsigned int gpio);
+	int (*write)(struct gpio_chip *chip, unsigned int gpio, unsigned on);
+	int (*read_detect_status)(struct gpio_chip *chip, unsigned int gpio);
+	int (*clear_detect_status)(struct gpio_chip *chip, unsigned int gpio);
+};
+
+int register_gpio_chip(struct gpio_chip *gpio_chip);
+
+#endif
arch/arm/mach-msm/include/mach/board-hsusb.h new file +68 -0

68 lines not on this page · raw message

arch/arm/mach-msm/include/mach/board.h +2 -0
index e302fbd..fd2c087 100644
@@ -41,4 +41,6 @@ void __init msm_init_gpio(void);
 void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks);
 void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
 
+static void msm_hsusb_set_vbus_state(int online); 
+
 #endif
arch/arm/mach-msm/smd_rpcrouter.c new file +1310 -0

1,310 lines not on this page · raw message

arch/arm/mach-msm/smd_rpcrouter.h new file +195 -0

195 lines not on this page · raw message

arch/arm/mach-msm/smd_rpcrouter_device.c new file +377 -0

193 lines not on this page · raw message

arch/arm/mach-msm/smd_rpcrouter_servers.c new file +229 -0

229 lines not on this page · raw message

drivers/staging/dream/include/mach/msm_rpcrouter.h +1 -0
index 9724ece..5e51705 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.4.4

Part of the diff is not shown here. View the raw message.

#1 lore raw
Quoted 3 lines · David Lanzendörfer

I've tried to import the SMD server pack into the kernel. But somehow it went wrong.
Any suggestions?

It would be good to elaborate on these details:

-where to pulled the driver from.
-what your testing criteria is.
-what the outcome is.

Thanks,
Michael

#2 lore raw
In reply to David Lanzendörfer
Quoted 4 lines · David Lanzendörfer

Hi Daniel
I've tried to import the SMD server pack into the kernel. But somehow it went wrong.
Any suggestions?

Too much at once .. You need to pull individual patches with specific features, or break up large patches into individual features..

Also please send stuff directly to my address with the list CC'd.

Daniel

Signature · 2 lines
Sent by an consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.