TTY patches for 2.6.36

index e4089c4..099105e 100644
@@ -43,7 +43,6 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
-#include <linux/timer.h>
 #include <linux/ctype.h>
 #include <linux/mm.h>
 #include <linux/string.h>

index 3046386..9330edb 100644
@@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0;
 
 #define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
 
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait; 
-#endif
-
 struct tty_driver *serial_driver;
 
 /* number of characters left in xmit buffer before we ask for more */

@@ -300,10 +296,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 				return;
 #endif /* CONFIG_MAGIC_SYSRQ */
 			}
-			/* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
-			wake_up(&keypress_wait);
-#endif			
 		}
 
 		if(!tty)

index 7cdb6ee..1ff87fa 100644
@@ -104,6 +104,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/uaccess.h>
+#include <linux/ctype.h>
 
 #define MAX_NR_CON_DRIVER 16
 

@@ -1789,8 +1790,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 			vc->vc_state = ESnormal;
 		return;
 	case ESpalette:
-		if ( (c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) {
-			vc->vc_par[vc->vc_npar++] = (c > '9' ? (c & 0xDF) - 'A' + 10 : c - '0');
+		if (isxdigit(c)) {
+			vc->vc_par[vc->vc_npar++] = hex_to_bin(c);
 			if (vc->vc_npar == 7) {
 				int i = vc->vc_par[0] * 3, j = 1;
 				vc->vc_palette[i] = 16 * vc->vc_par[j++];

index 09ef570..bc8ed4b 100644
@@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
 	},
 	[PORT_16654] = {
 		.name		= "ST16654",

844 lines not on this page · raw message

59 lines not on this page · raw message

index 273e7cb..f9c01ae 100644
@@ -721,7 +721,7 @@ static int serial_m3110_probe(struct spi_device *spi)
 	struct uart_max3110 *max;
 	int ret;
 	unsigned char *buffer;
-
+	u16 res;
 	max = kzalloc(sizeof(*max), GFP_KERNEL);
 	if (!max)
 		return -ENOMEM;

@@ -753,7 +753,16 @@ static int serial_m3110_probe(struct spi_device *spi)
 
 	max->cur_conf = 0;
 	atomic_set(&max->irq_pending, 0);
-
+	/* Check if reading configuration register returns something sane */
+
+	res = RC_TAG;
+	ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
+	if (ret < 0 || res == 0 || res == 0xffff) {
+		printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+									res);
+		ret = -ENODEV;
+		goto err_get_page;
+	}
 	buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
 	if (!buffer) {
 		ret = -ENOMEM;

index f9c01ae..0341853 100644
@@ -56,8 +56,7 @@ struct uart_max3110 {
 	wait_queue_head_t wq;
 	struct task_struct *main_thread;
 	struct task_struct *read_thread;
-	int mthread_up;
-	spinlock_t lock;
+	struct mutex thread_mutex;;
 
 	u32 baud;
 	u16 cur_conf;

@@ -397,7 +396,8 @@ static int max3110_main_thread(void *_max)
 					       atomic_read(&max->con_tx_need) ||
 					     atomic_read(&max->uart_tx_need)) ||
 					     kthread_should_stop());
-		max->mthread_up = 1;
+
+		mutex_lock(&max->thread_mutex);
 
 #ifdef CONFIG_MRST_MAX3110_IRQ
 		if (atomic_read(&max->irq_pending)) {

@@ -417,7 +417,7 @@ static int max3110_main_thread(void *_max)
 			transmit_char(max);
 			atomic_set(&max->uart_tx_need, 0);
 		}
-		max->mthread_up = 0;
+		mutex_unlock(&max->thread_mutex);
 	} while (!kthread_should_stop());
 
 	return ret;

@@ -444,8 +444,9 @@ static int max3110_read_thread(void *_max)
 
 	pr_info(PR_FMT "start read thread\n");
 	do {
-		if (!max->mthread_up)
-			max3110_console_receive(max);
+		mutex_lock(&max->thread_mutex);
+		max3110_console_receive(max);
+		mutex_unlock(&max->thread_mutex);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ / 20);

@@ -745,7 +746,7 @@ static int serial_m3110_probe(struct spi_device *spi)
 	max->name = spi->modalias;	/* use spi name as the name */
 	max->irq = (u16)spi->irq;
 
-	spin_lock_init(&max->lock);
+	mutex_init(&max->thread_mutex);
 
 	max->word_7bits = 0;
 	max->parity = 0;

index 0341853..f6ad1ec 100644
@@ -48,6 +48,10 @@
 
 #define PR_FMT	"mrst_max3110: "
 
+#define UART_TX_NEEDED 1
+#define CON_TX_NEEDED  2
+#define BIT_IRQ_PENDING    3
+
 struct uart_max3110 {
 	struct uart_port port;
 	struct spi_device *spi;

@@ -63,15 +67,13 @@ struct uart_max3110 {
 	u8 clock;
 	u8 parity, word_7bits;
 
-	atomic_t uart_tx_need;
+	unsigned long uart_flags;
 
 	/* console related */
 	struct circ_buf con_xmit;
-	atomic_t con_tx_need;
 
 	/* irq related */
 	u16 irq;
-	atomic_t irq_pending;
 };
 
 /* global data structure, may need be removed */

@@ -176,10 +178,9 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
 		xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
 	}
 
-	if (!atomic_read(&max->con_tx_need)) {
-		atomic_set(&max->con_tx_need, 1);
+
+	if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
 		wake_up_process(max->main_thread);
-	}
 }
 
 /*

@@ -318,10 +319,8 @@ static void serial_m3110_start_tx(struct uart_port *port)
 	struct uart_max3110 *max =
 		container_of(port, struct uart_max3110, port);
 
-	if (!atomic_read(&max->uart_tx_need)) {
-		atomic_set(&max->uart_tx_need, 1);
+	if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
 		wake_up_process(max->main_thread);
-	}
 }
 
 static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)

@@ -392,32 +391,23 @@ static int max3110_main_thread(void *_max)
 	pr_info(PR_FMT "start main thread\n");
 
 	do {
-		wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) ||
-					       atomic_read(&max->con_tx_need) ||
-					     atomic_read(&max->uart_tx_need)) ||
-					     kthread_should_stop());
+		wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop());
 
 		mutex_lock(&max->thread_mutex);
 
-#ifdef CONFIG_MRST_MAX3110_IRQ
-		if (atomic_read(&max->irq_pending)) {
+		if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
 			max3110_console_receive(max);
-			atomic_set(&max->irq_pending, 0);
-		}
-#endif
 
 		/* first handle console output */
-		if (atomic_read(&max->con_tx_need)) {
+		if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
 			send_circ_buf(max, xmit);
-			atomic_set(&max->con_tx_need, 0);
-		}
 
 		/* handle uart output */
-		if (atomic_read(&max->uart_tx_need)) {
+		if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
 			transmit_char(max);
-			atomic_set(&max->uart_tx_need, 0);
-		}
+
 		mutex_unlock(&max->thread_mutex);
+
 	} while (!kthread_should_stop());
 
 	return ret;

@@ -430,10 +420,9 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
 
 	/* max3110's irq is a falling edge, not level triggered,
 	 * so no need to disable the irq */
-	if (!atomic_read(&max->irq_pending)) {
-		atomic_inc(&max->irq_pending);
+	if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
 		wake_up_process(max->main_thread);
-	}
+
 	return IRQ_HANDLED;
 }
 #else

@@ -753,7 +742,8 @@ static int serial_m3110_probe(struct spi_device *spi)
 	max->baud = 0;
 
 	max->cur_conf = 0;
-	atomic_set(&max->irq_pending, 0);
+	max->uart_flags = 0;
+
 	/* Check if reading configuration register returns something sane */
 
 	res = RC_TAG;

index a799e20..1375fa1 100644
@@ -87,12 +87,10 @@
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 
 /*
- * some architectures define FIOQSIZE as 0x545E, which is used for
- * TIOCGHAYESESP on others
+ * Some arches already define FIOQSIZE due to a historical
+ * conflict with a Hayes modem-specific ioctl value.
  */
 #ifndef FIOQSIZE
-# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
 # define FIOQSIZE	0x5460
 #endif
 

index 67bb9f6..c7b0cc6 100644
@@ -106,7 +106,5 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
 
 #endif /* _ASM_ALPHA_IOCTLS_H */

index e6ac0b6..143dafb 100644
@@ -72,8 +72,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

index 35bbc18..0c66ef6 100644
@@ -70,8 +70,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 #define TIOCSERSETRS485	0x5461  /* enable rs-485 (deprecated) */

index f41b636..f0ee86c 100644
@@ -75,8 +75,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

index b9f54bb..f4c13a5 100644
@@ -69,8 +69,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

index 3f04a99..2fb9e16 100644
@@ -103,7 +103,5 @@
 #define TIOCSERSETMULTI 0x5490 /* Set multiport config */
 #define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
 #define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP	0x5493 /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP	0x5494 /* Set Hayes ESP configuration */
 
 #endif /* __ASM_IOCTLS_H */

index dcbfb45..638219a 100644
@@ -70,8 +70,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

index 6747fad..6cc497e 100644
@@ -68,8 +68,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460	/* Get exact space used by quota */
 
 #define TIOCSTART	0x5461

index c7b0cc6..59617c3 100644
@@ -80,6 +80,7 @@
 # define TIOCPKT_START		 8
 # define TIOCPKT_NOSTOP		16
 # define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
 
 
 #define TIOCNOTTY	0x5422

@@ -91,6 +92,7 @@
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454

index ad854a4..879dd35 100644
@@ -180,6 +180,7 @@ struct ktermios {
 #define FLUSHO	0x00800000
 #define PENDIN	0x20000000
 #define IEXTEN	0x00000400
+#define EXTPROC	0x10000000
 
 /* Values for the ACTION argument to `tcflow'.  */
 #define	TCOOFF		0

index 7f0b6d1..0b30894 100644
@@ -52,6 +52,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCGRS485      0x542E
 #define TIOCSRS485      0x542F

@@ -81,6 +82,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 

index f784d11..704135d 100644
@@ -177,6 +177,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index 143dafb..b7dd324 100644
@@ -53,6 +53,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCGRS485      0x542E
 #define TIOCSRS485      0x542F

@@ -82,6 +83,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index db2daab..366adc5 100644
@@ -175,6 +175,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index 0c66ef6..157ea51 100644
@@ -54,6 +54,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -84,6 +85,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index 66e1a74..1c43bc8 100644
@@ -214,6 +214,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index d0c30e3..a993e37 100644
@@ -53,6 +53,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -79,6 +80,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index 5568492..7722e19 100644
@@ -180,6 +180,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 
 /* tcflow() and TCXONC use these */

index 98a53d0..b6b249f 100644
@@ -53,6 +53,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -79,6 +80,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index 31eca81..3287a62 100644
@@ -179,6 +179,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 
 /* tcflow() and TCXONC use these */

index f0ee86c..b79c385 100644
@@ -59,6 +59,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -85,6 +86,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index 9f162e0..c009b94 100644
@@ -187,6 +187,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index f4c13a5..6628806 100644
@@ -53,6 +53,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451

@@ -79,6 +80,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index bc10400..957a3c6 100644
@@ -179,6 +179,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index b8d2f4b..91a57d6 100644
@@ -52,6 +52,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -78,6 +79,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index 8c14170..aea1e37 100644
@@ -179,6 +179,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 
 /* tcflow() and TCXONC use these */

index 2fb9e16..d87cb04 100644
@@ -41,7 +41,7 @@
 #define	 TIOCPKT_START		0x08	/* start output */
 #define	 TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
 #define	 TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
-/* #define  TIOCPKT_IOCTL		0x40	state change of pty driver */
+#define  TIOCPKT_IOCTL		0x40	/* state change of pty driver */
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
 #define TIOCNOTTY	0x5471		/* void tty association */

@@ -83,6 +83,7 @@
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T', 0x36, int)  /* Generate signal on Pty slave */
 
 /* I hope the range from 0x5480 on is free ... */
 #define TIOCSCTTY	0x5480		/* become controlling tty */

index c83c684..76630b3 100644
@@ -203,6 +203,7 @@ struct ktermios {
 #define PENDIN	0040000		/* Retype pending input (state).  */
 #define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
 #define ITOSTOP	TOSTOP
+#define EXTPROC	0200000		/* External processing on pty */
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */

index 638219a..cb8cf19 100644
@@ -54,6 +54,7 @@
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number
 						       * (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T', 0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451

@@ -80,6 +81,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index eb2b0dc..130d424 100644
@@ -180,6 +180,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index 6cc497e..4e06144 100644
@@ -52,6 +52,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -82,6 +83,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index d8bbc73..d1ab921 100644
@@ -180,6 +180,7 @@ struct ktermios {
 #define FLUSHO  0010000
 #define PENDIN  0040000
 #define IEXTEN  0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index 1842186..8519200 100644
@@ -80,6 +80,7 @@
 # define TIOCPKT_START		 8
 # define TIOCPKT_NOSTOP		16
 # define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
 
 
 #define TIOCNOTTY	0x5422

@@ -93,6 +94,7 @@
 #define TIOCSRS485	0x542f
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454

index 6698188..549d700 100644
@@ -189,6 +189,7 @@ struct ktermios {
 #define FLUSHO	0x00800000
 #define PENDIN	0x20000000
 #define IEXTEN	0x00000400
+#define EXTPROC	0x10000000
 
 /* Values for the ACTION argument to `tcflow'.  */
 #define	TCOOFF		0

index 40e481b..2f3d873 100644
@@ -60,6 +60,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

@@ -86,6 +87,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 

index c212c37..eb6c4c6 100644
@@ -69,6 +69,7 @@
 # define TIOCPKT_START		 8
 # define TIOCPKT_NOSTOP		16
 # define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
 
 
 #define TIOCNOTTY	_IO('T', 34) /* 0x5422 */

@@ -84,6 +85,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
 #define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */

index 1fe6855..53f4ee0 100644
@@ -80,6 +80,7 @@
 /* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
 #define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
 #define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+#define TIOCSIG		_IOW('t', 136, int) /* Generate signal on Pty slave */
 
 /* Little f */
 #define FIOCLEX		_IO('f', 1)

@@ -132,5 +133,6 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #endif /* !(_ASM_SPARC_IOCTLS_H) */

index d72dfed..23b10ff 100644
@@ -225,6 +225,7 @@ struct ktermios {
 #define FLUSHO	0x00002000
 #define PENDIN	0x00004000
 #define IEXTEN	0x00008000
+#define EXTPROC	0x00010000
 
 /* modem lines */
 #define TIOCM_LE	0x001

index 0ffa942..ab18000 100644
@@ -81,6 +81,7 @@
 # define TIOCPKT_START		 8
 # define TIOCPKT_NOSTOP		16
 # define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
 
 
 #define TIOCNOTTY	_IO('T', 34)

@@ -97,6 +98,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83)
 #define TIOCSERGWILD	_IOR('T', 84,  int)

index 85aa6a3c..0d6c871 100644
@@ -196,6 +196,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 

index bdae832..428f4fe 100644
@@ -1102,6 +1102,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	if (I_IUCLC(tty) && L_IEXTEN(tty))
 		c = tolower(c);
 
+	if (L_EXTPROC(tty)) {
+		put_tty_queue(c, tty);
+		return;
+	}
+
 	if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
 	    I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
 	    c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {

@@ -1409,7 +1414,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	n_tty_set_room(tty);
 
-	if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) {
+	if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+		L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		if (waitqueue_active(&tty->read_wait))
 			wake_up_interruptible(&tty->read_wait);

@@ -1585,7 +1591,7 @@ static int n_tty_open(struct tty_struct *tty)
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
 	tty_flush_to_ldisc(tty);
-	if (tty->icanon) {
+	if (tty->icanon && !L_EXTPROC(tty)) {
 		if (tty->canon_data)
 			return 1;
 	} else if (tty->read_cnt >= (amt ? amt : 1))

@@ -1632,6 +1638,11 @@ static int copy_from_read_buf(struct tty_struct *tty,
 		spin_lock_irqsave(&tty->read_lock, flags);
 		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
 		tty->read_cnt -= n;
+		/* Turn single EOF into zero-length read */
+		if (L_EXTPROC(tty) && tty->icanon && n == 1) {
+			if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty))
+				n--;
+		}
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		*b += n;
 		*nr -= n;

@@ -1812,7 +1823,7 @@ do_it_again:
 			nr--;
 		}
 
-		if (tty->icanon) {
+		if (tty->icanon && !L_EXTPROC(tty)) {
 			/* N.B. avoid overrun if nr == 0 */
 			while (nr && tty->read_cnt) {
 				int eol;

index d83a431..b640ef2 100644
@@ -171,6 +171,23 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg)
 	return 0;
 }
 
+/* Send a signal to the slave */
+static int pty_signal(struct tty_struct *tty, int sig)
+{
+	unsigned long flags;
+	struct pid *pgrp;
+
+	if (tty->link) {
+		spin_lock_irqsave(&tty->link->ctrl_lock, flags);
+		pgrp = get_pid(tty->link->pgrp);
+		spin_unlock_irqrestore(&tty->link->ctrl_lock, flags);
+
+		kill_pgrp(pgrp, sig, 1);
+		put_pid(pgrp);
+	}
+	return 0;
+}
+
 static void pty_flush_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;

@@ -321,6 +338,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
 	switch (cmd) {
 	case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
 		return pty_set_lock(tty, (int __user *) arg);
+	case TIOCSIG:    /* Send signal to other side of pty */
+		return pty_signal(tty, (int) arg);
 	}
 	return -ENOIOCTLCMD;
 }

@@ -476,6 +495,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
 		return pty_set_lock(tty, (int __user *)arg);
 	case TIOCGPTN: /* Get PT Number */
 		return put_user(tty->index, (unsigned int __user *)arg);
+	case TIOCSIG:    /* Send signal to other side of pty */
+		return pty_signal(tty, (int) arg);
 	}
 
 	return -ENOIOCTLCMD;

index 6bd5f88..0c18899 100644
@@ -517,19 +517,25 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
 
 	/* See if packet mode change of state. */
 	if (tty->link && tty->link->packet) {
+		int extproc = (old_termios.c_lflag & EXTPROC) |
+				(tty->termios->c_lflag & EXTPROC);
 		int old_flow = ((old_termios.c_iflag & IXON) &&
 				(old_termios.c_cc[VSTOP] == '\023') &&
 				(old_termios.c_cc[VSTART] == '\021'));
 		int new_flow = (I_IXON(tty) &&
 				STOP_CHAR(tty) == '\023' &&
 				START_CHAR(tty) == '\021');
-		if (old_flow != new_flow) {
+		if ((old_flow != new_flow) || extproc) {
 			spin_lock_irqsave(&tty->ctrl_lock, flags);
-			tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
-			if (new_flow)
-				tty->ctrl_status |= TIOCPKT_DOSTOP;
-			else
-				tty->ctrl_status |= TIOCPKT_NOSTOP;
+			if (old_flow != new_flow) {
+				tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
+				if (new_flow)
+					tty->ctrl_status |= TIOCPKT_DOSTOP;
+				else
+					tty->ctrl_status |= TIOCPKT_NOSTOP;
+			}
+			if (extproc)
+				tty->ctrl_status |= TIOCPKT_IOCTL;
 			spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 			wake_up_interruptible(&tty->link->read_wait);
 		}

index 63ae858..fa4bc48 100644
@@ -969,6 +969,7 @@ COMPATIBLE_IOCTL(TIOCGPGRP)
 COMPATIBLE_IOCTL(TIOCGPTN)
 COMPATIBLE_IOCTL(TIOCSPTLCK)
 COMPATIBLE_IOCTL(TIOCSERGETLSR)
+COMPATIBLE_IOCTL(TIOCSIG)
 #ifdef TCGETS2
 COMPATIBLE_IOCTL(TCGETS2)
 COMPATIBLE_IOCTL(TCSETS2)

index 1375fa1..8554cb6 100644
@@ -69,6 +69,7 @@
 #define TCSETX		0x5433
 #define TCSETXF		0x5434
 #define TCSETXW		0x5435
+#define TIOCSIG		_IOW('T', 0x36, int)  /* pty: generate signal */
 
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451

@@ -102,6 +103,7 @@
 #define TIOCPKT_START		 8
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
 
 #define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 

index 1c9773d..232b478 100644
@@ -178,6 +178,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0

index 931078b..33722f1 100644
@@ -179,6 +179,7 @@ struct tty_bufhead {
 #define L_FLUSHO(tty)	_L_FLAG((tty), FLUSHO)
 #define L_PENDIN(tty)	_L_FLAG((tty), PENDIN)
 #define L_IEXTEN(tty)	_L_FLAG((tty), IEXTEN)
+#define L_EXTPROC(tty)	_L_FLAG((tty), EXTPROC)
 
 struct device;
 struct signal_struct;

index 1ff87fa..a44ba81 100644
@@ -699,7 +699,10 @@ void redraw_screen(struct vc_data *vc, int is_switch)
 			update_attr(vc);
 			clear_buffer_attributes(vc);
 		}
-		if (update && vc->vc_mode != KD_GRAPHICS)
+
+		/* Forcibly update if we're panicing */
+		if ((update && vc->vc_mode != KD_GRAPHICS) ||
+		    vt_force_oops_output(vc))
 			do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2);
 	}
 	set_cursor(vc);

@@ -737,6 +740,7 @@ static void visual_init(struct vc_data *vc, int num, int init)
 	vc->vc_hi_font_mask = 0;
 	vc->vc_complement_mask = 0;
 	vc->vc_can_do_color = 0;
+	vc->vc_panic_force_write = false;
 	vc->vc_sw->con_init(vc, init);
 	if (!vc->vc_complement_mask)
 		vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;

@@ -2499,7 +2503,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count)
 		goto quit;
 	}
 
-	if (vc->vc_mode != KD_TEXT)
+	if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
 		goto quit;
 
 	/* undraw cursor first */

@@ -3704,7 +3708,8 @@ void do_unblank_screen(int leaving_gfx)
 		return;
 	}
 	vc = vc_cons[fg_console].d;
-	if (vc->vc_mode != KD_TEXT)
+	/* Try to unblank in oops case too */
+	if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
 		return; /* but leave console_blanked != 0 */
 
 	if (blankinterval) {

@@ -3713,7 +3718,7 @@ void do_unblank_screen(int leaving_gfx)
 	}
 
 	console_blanked = 0;
-	if (vc->vc_sw->con_blank(vc, 0, leaving_gfx))
+	if (vc->vc_sw->con_blank(vc, 0, leaving_gfx) || vt_force_oops_output(vc))
 		/* Low-level driver cannot restore -> do it ourselves */
 		update_screen(vc);
 	if (console_blank_hook)

index 3e18c9e..e821cad 100644
@@ -128,7 +128,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 
 	strcpy(info->fix.id, "inteldrmfb");
 
-	info->flags = FBINFO_DEFAULT;
+	info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
 	info->fbops = &intelfb_ops;
 
 	/* setup aperture base/size for vesafb takeover */

@@ -146,8 +146,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
 	info->fix.smem_len = size;
 
-	info->flags = FBINFO_DEFAULT;
-
 	info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset,
 				       size);
 	if (!info->screen_base) {

index 257ea13..8ece632 100644
@@ -250,6 +250,7 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev,
 		info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
 			      FBINFO_HWACCEL_FILLRECT |
 			      FBINFO_HWACCEL_IMAGEBLIT;
+	info->flags |= FBINFO_CAN_FORCE_OUTPUT;
 	info->fbops = &nouveau_fbcon_ops;
 	info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset -
 			       dev_priv->vm_vram_base;

index dc1634b..dbf8696 100644
@@ -224,7 +224,7 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 
 	drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
 
-	info->flags = FBINFO_DEFAULT;
+	info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
 	info->fbops = &radeonfb_ops;
 
 	tmp = radeon_bo_gpu_offset(rbo) - rdev->mc.vram_start;

index b0a3fa0..7eadb35 100644
@@ -283,7 +283,8 @@ static inline int fbcon_is_inactive(struct vc_data *vc, struct fb_info *info)
 	struct fbcon_ops *ops = info->fbcon_par;
 
 	return (info->state != FBINFO_STATE_RUNNING ||
-		vc->vc_mode != KD_TEXT || ops->graphics);
+		vc->vc_mode != KD_TEXT || ops->graphics) &&
+		!vt_force_oops_output(vc);
 }
 
 static inline int get_color(struct vc_data *vc, struct fb_info *info,

@@ -1073,6 +1074,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (p->userfont)
 		charcnt = FNTCHARCNT(p->fontdata);
 
+	vc->vc_panic_force_write = !!(info->flags & FBINFO_CAN_FORCE_OUTPUT);
 	vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1);
 	vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
 	if (charcnt == 256) {

index 38fe59d..d7d9acd 100644
@@ -105,6 +105,7 @@ struct vc_data {
 	struct vc_data **vc_display_fg;		/* [!] Ptr to var holding fg console for this display */
 	unsigned long	vc_uni_pagedir;
 	unsigned long	*vc_uni_pagedir_loc;  /* [!] Location of uni_pagedir variable for this console */
+	bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
 	/* additional information is in vt_kern.h */
 };
 

index e7445df..a66729d 100644
@@ -812,6 +812,10 @@ struct fb_tile_ops {
  */
 #define FBINFO_BE_MATH  0x100000
 
+/* report to the VT layer that this fb driver can accept forced console
+   output like oopses */
+#define FBINFO_CAN_FORCE_OUTPUT     0x200000
+
 struct fb_info {
 	int node;
 	int flags;

index 7f56db4..56cce34 100644
@@ -100,6 +100,13 @@ extern int unbind_con_driver(const struct consw *csw, int first, int last,
 			     int deflt);
 int vty_init(const struct file_operations *console_fops);
 
+static inline bool vt_force_oops_output(struct vc_data *vc)
+{
+	if (oops_in_progress && vc->vc_panic_force_write)
+		return true;
+	return false;
+}
+
 /*
  * vc_screen.c shares this temporary buffer with the console write code so that
  * we can easily avoid touching user space while holding the console spinlock.

index 4e395c9..750650c 100644
@@ -14,6 +14,7 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
+ *	FIXME: brdp->state needs proper locking.
  */
 
 /*****************************************************************************/

@@ -4011,6 +4012,7 @@ static int stli_getbrdstats(combrd_t __user *bp)
 		return -ENODEV;
 
 	memset(&stli_brdstats, 0, sizeof(combrd_t));
+
 	stli_brdstats.brd = brdp->brdnr;
 	stli_brdstats.type = brdp->brdtype;
 	stli_brdstats.hwid = 0;

@@ -4076,10 +4078,13 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
 	if (brdp == NULL)
 		return -ENODEV;
 
+	mutex_lock(&portp->port.mutex);
 	if (brdp->state & BST_STARTED) {
 		if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
-		    &stli_cdkstats, sizeof(asystats_t), 1)) < 0)
+		    &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
+			mutex_unlock(&portp->port.mutex);
 			return rc;
+		}
 	} else {
 		memset(&stli_cdkstats, 0, sizeof(asystats_t));
 	}

@@ -4124,6 +4129,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
 	stli_comstats.modem = stli_cdkstats.dcdcnt;
 	stli_comstats.hwid = stli_cdkstats.hwid;
 	stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
+	mutex_unlock(&portp->port.mutex);
 
 	return 0;
 }

@@ -4186,15 +4192,20 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
 	if (!brdp)
 		return -ENODEV;
 
+	mutex_lock(&portp->port.mutex);
+
 	if (brdp->state & BST_STARTED) {
-		if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0)
+		if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
+			mutex_unlock(&portp->port.mutex);
 			return rc;
+		}
 	}
 
 	memset(&stli_comstats, 0, sizeof(comstats_t));
 	stli_comstats.brd = portp->brdnr;
 	stli_comstats.panel = portp->panelnr;
 	stli_comstats.port = portp->portnr;
+	mutex_unlock(&portp->port.mutex);
 
 	if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
 		return -EFAULT;

@@ -4266,8 +4277,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 	done = 0;
 	rc = 0;
 
-	lock_kernel();
-
 	switch (cmd) {
 	case COM_GETPORTSTATS:
 		rc = stli_getportstats(NULL, NULL, argp);

@@ -4290,8 +4299,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		done++;
 		break;
 	}
-	unlock_kernel();
-
 	if (done)
 		return rc;
 

@@ -4308,8 +4315,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 	if (brdp->state == 0)
 		return -ENODEV;
 
-	lock_kernel();
-
 	switch (cmd) {
 	case STL_BINTR:
 		EBRDINTR(brdp);

@@ -4332,7 +4337,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		rc = -ENOIOCTLCMD;
 		break;
 	}
-	unlock_kernel();
 	return rc;
 }
 

index 6049fd7..f2167f8 100644
@@ -807,7 +807,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
 		timeout = HZ;
 	tend = jiffies + timeout;
 
-	lock_kernel();
 	while (stl_datastate(portp)) {
 		if (signal_pending(current))
 			break;

@@ -815,7 +814,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
 		if (time_after_eq(jiffies, tend))
 			break;
 	}
-	unlock_kernel();
 }
 
 /*****************************************************************************/

@@ -1029,6 +1027,8 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
 	pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
 
 	memset(&sio, 0, sizeof(struct serial_struct));
+
+	mutex_lock(&portp->port.mutex);
 	sio.line = portp->portnr;
 	sio.port = portp->ioaddr;
 	sio.flags = portp->port.flags;

@@ -1048,6 +1048,7 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
 	brdp = stl_brds[portp->brdnr];
 	if (brdp != NULL)
 		sio.irq = brdp->irq;
+	mutex_unlock(&portp->port.mutex);
 
 	return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
 }

@@ -1069,12 +1070,15 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
 
 	if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
 		return -EFAULT;
+	mutex_lock(&portp->port.mutex);
 	if (!capable(CAP_SYS_ADMIN)) {
 		if ((sio.baud_base != portp->baud_base) ||
 		    (sio.close_delay != portp->close_delay) ||
 		    ((sio.flags & ~ASYNC_USR_MASK) !=
-		    (portp->port.flags & ~ASYNC_USR_MASK)))
+		    (portp->port.flags & ~ASYNC_USR_MASK))) {
+			mutex_unlock(&portp->port.mutex);
 			return -EPERM;
+		}
 	} 
 
 	portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |

@@ -1083,6 +1087,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
 	portp->close_delay = sio.close_delay;
 	portp->closing_wait = sio.closing_wait;
 	portp->custom_divisor = sio.custom_divisor;
+	mutex_unlock(&portp->port.mutex);
 	stl_setport(portp, tty->termios);
 	return 0;
 }

@@ -1147,8 +1152,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
 
 	rc = 0;
 
-	lock_kernel();
-
 	switch (cmd) {
 	case TIOCGSERIAL:
 		rc = stl_getserial(portp, argp);

@@ -1173,7 +1176,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
 		rc = -ENOIOCTLCMD;
 		break;
 	}
-	unlock_kernel();
 	return rc;
 }
 

@@ -2327,6 +2329,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
 			return -ENODEV;
 	}
 
+	mutex_lock(&portp->port.mutex);
 	portp->stats.state = portp->istate;
 	portp->stats.flags = portp->port.flags;
 	portp->stats.hwid = portp->hwid;

@@ -2358,6 +2361,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
 		(STL_TXBUFSIZE - (tail - head));
 
 	portp->stats.signals = (unsigned long) stl_getsignals(portp);
+	mutex_unlock(&portp->port.mutex);
 
 	return copy_to_user(cp, &portp->stats,
 			    sizeof(comstats_t)) ? -EFAULT : 0;

@@ -2382,10 +2386,12 @@ static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
 			return -ENODEV;
 	}
 
+	mutex_lock(&portp->port.mutex);
 	memset(&portp->stats, 0, sizeof(comstats_t));
 	portp->stats.brd = portp->brdnr;
 	portp->stats.panel = portp->panelnr;
 	portp->stats.port = portp->portnr;
+	mutex_unlock(&portp->port.mutex);
 	return copy_to_user(cp, &portp->stats,
 			    sizeof(comstats_t)) ? -EFAULT : 0;
 }

@@ -2451,7 +2457,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		return -ENODEV;
 	rc = 0;
 
-	lock_kernel();
 	switch (cmd) {
 	case COM_GETPORTSTATS:
 		rc = stl_getportstats(NULL, NULL, argp);

@@ -2472,7 +2477,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		rc = -ENOIOCTLCMD;
 		break;
 	}
-	unlock_kernel();
 	return rc;
 }
 

index 750650c..5e9a81d 100644
@@ -14,7 +14,6 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- *	FIXME: brdp->state needs proper locking.
  */
 
 /*****************************************************************************/

@@ -204,9 +203,9 @@ static int		stli_shared;
  *	the board has been detected, and whether it is actually running a slave
  *	or not.
  */
-#define	BST_FOUND	0x1
-#define	BST_STARTED	0x2
-#define	BST_PROBED	0x4
+#define	BST_FOUND	0
+#define	BST_STARTED	1
+#define	BST_PROBED	2
 
 /*
  *	Define the set of port state flags. These are marked for internal

@@ -817,7 +816,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
 	brdp = stli_brds[brdnr];
 	if (brdp == NULL)
 		return -ENODEV;
-	if ((brdp->state & BST_STARTED) == 0)
+	if (!test_bit(BST_STARTED, &brdp->state))
 		return -ENODEV;
 	portnr = MINOR2PORT(minordev);
 	if (portnr > brdp->nrports)

@@ -1847,7 +1846,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip
 	rc = stli_portcmdstats(NULL, portp);
 
 	uart = "UNKNOWN";
-	if (brdp->state & BST_STARTED) {
+	if (test_bit(BST_STARTED, &brdp->state)) {
 		switch (stli_comstats.hwid) {
 		case 0:	uart = "2681"; break;
 		case 1:	uart = "SC26198"; break;

@@ -1856,7 +1855,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip
 	}
 	seq_printf(m, "%d: uart:%s ", portnr, uart);
 
-	if ((brdp->state & BST_STARTED) && (rc >= 0)) {
+	if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) {
 		char sep;
 
 		seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,

@@ -2356,7 +2355,7 @@ static void stli_poll(unsigned long arg)
 		brdp = stli_brds[brdnr];
 		if (brdp == NULL)
 			continue;
-		if ((brdp->state & BST_STARTED) == 0)
+		if (!test_bit(BST_STARTED, &brdp->state))
 			continue;
 
 		spin_lock(&brd_lock);

@@ -3141,7 +3140,7 @@ static int stli_initecp(struct stlibrd *brdp)
 	}
 
 
-	brdp->state |= BST_FOUND;
+	set_bit(BST_FOUND, &brdp->state);
 	return 0;
 err_unmap:
 	iounmap(brdp->membase);

@@ -3298,7 +3297,7 @@ static int stli_initonb(struct stlibrd *brdp)
 	brdp->panels[0] = brdp->nrports;
 
 
-	brdp->state |= BST_FOUND;
+	set_bit(BST_FOUND, &brdp->state);
 	return 0;
 err_unmap:
 	iounmap(brdp->membase);

@@ -3408,7 +3407,7 @@ stli_donestartup:
 	spin_unlock_irqrestore(&brd_lock, flags);
 
 	if (rc == 0)
-		brdp->state |= BST_STARTED;
+		set_bit(BST_STARTED, &brdp->state);
 
 	if (! stli_timeron) {
 		stli_timeron++;

@@ -3711,7 +3710,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev,
 	if (retval)
 		goto err_null;
 
-	brdp->state |= BST_PROBED;
+	set_bit(BST_PROBED, &brdp->state);
 	pci_set_drvdata(pdev, brdp);
 
 	EBRDENABLE(brdp);

@@ -3842,7 +3841,7 @@ static int __init stli_initbrds(void)
 			brdp = stli_brds[i];
 			if (brdp == NULL)
 				continue;
-			if (brdp->state & BST_FOUND) {
+			if (test_bit(BST_FOUND, &brdp->state)) {
 				EBRDENABLE(brdp);
 				brdp->enable = NULL;
 				brdp->disable = NULL;

@@ -4079,7 +4078,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
 		return -ENODEV;
 
 	mutex_lock(&portp->port.mutex);
-	if (brdp->state & BST_STARTED) {
+	if (test_bit(BST_STARTED, &brdp->state)) {
 		if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
 		    &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
 			mutex_unlock(&portp->port.mutex);

@@ -4194,7 +4193,7 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
 
 	mutex_lock(&portp->port.mutex);
 
-	if (brdp->state & BST_STARTED) {
+	if (test_bit(BST_STARTED, &brdp->state)) {
 		if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
 			mutex_unlock(&portp->port.mutex);
 			return rc;

@@ -4323,10 +4322,10 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		rc = stli_startbrd(brdp);
 		break;
 	case STL_BSTOP:
-		brdp->state &= ~BST_STARTED;
+		clear_bit(BST_STARTED, &brdp->state);
 		break;
 	case STL_BRESET:
-		brdp->state &= ~BST_STARTED;
+		clear_bit(BST_STARTED, &brdp->state);
 		EBRDRESET(brdp);
 		if (stli_shared == 0) {
 			if (brdp->reenable != NULL)

@@ -4382,7 +4381,8 @@ static void istallion_cleanup_isa(void)
 	unsigned int j;
 
 	for (j = 0; (j < stli_nrbrds); j++) {
-		if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED))
+		if ((brdp = stli_brds[j]) == NULL ||
+				test_bit(BST_PROBED, &brdp->state))
 			continue;
 
 		stli_cleanup_ports(brdp);

index 7faca98..ad700a6 100644
@@ -86,7 +86,7 @@ struct stlibrd {
 	unsigned long	magic;
 	unsigned int	brdnr;
 	unsigned int	brdtype;
-	unsigned int	state;
+	unsigned long	state;
 	unsigned int	nrpanels;
 	unsigned int	nrports;
 	unsigned int	nrdevs;

index b02332a..af4de1f 100644
@@ -47,7 +47,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 

@@ -1184,6 +1183,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
 	if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
 		return -EFAULT;
 
+	mutex_lock(&port->port.mutex);
 	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
 			(tmp.flags & ASYNC_SPD_MASK));
 

@@ -1191,8 +1191,10 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
 		if ((tmp.close_delay != port->port.close_delay) ||
 		    (tmp.closing_wait != port->port.closing_wait) ||
 		    ((tmp.flags & ~ASYNC_USR_MASK) !=
-		     (port->port.flags & ~ASYNC_USR_MASK)))
+		     (port->port.flags & ~ASYNC_USR_MASK))) {
+			mutex_unlock(&port->port.mutex);
 			return -EPERM;
+		}
 		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
 			       (tmp.flags & ASYNC_USR_MASK));
 	} else  {

@@ -1208,6 +1210,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
 		rc_change_speed(tty, bp, port);
 		spin_unlock_irqrestore(&riscom_lock, flags);
 	}
+	mutex_unlock(&port->port.mutex);
 	return 0;
 }
 

@@ -1220,12 +1223,15 @@ static int rc_get_serial_info(struct riscom_port *port,
 	memset(&tmp, 0, sizeof(tmp));
 	tmp.type = PORT_CIRRUS;
 	tmp.line = port - rc_port;
+
+	mutex_lock(&port->port.mutex);
 	tmp.port = bp->base;
 	tmp.irq  = bp->irq;
 	tmp.flags = port->port.flags;
 	tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
 	tmp.close_delay = port->port.close_delay * HZ/100;
 	tmp.closing_wait = port->port.closing_wait * HZ/100;
+	mutex_unlock(&port->port.mutex);
 	tmp.xmit_fifo_size = CD180_NFIFO;
 	return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
 }

@@ -1242,14 +1248,10 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp,
 
 	switch (cmd) {
 	case TIOCGSERIAL:
-		lock_kernel();
 		retval = rc_get_serial_info(port, argp);
-		unlock_kernel();
 		break;
 	case TIOCSSERIAL:
-		lock_kernel();
 		retval = rc_set_serial_info(tty, port, argp);
-		unlock_kernel();
 		break;
 	default:
 		retval = -ENOIOCTLCMD;

index 98310e1..c27e9d2 100644
@@ -124,7 +124,6 @@
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>

@@ -872,7 +871,6 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty)
 static int isicom_open(struct tty_struct *tty, struct file *filp)
 {
 	struct isi_port *port;
-	struct isi_board *card;
 	struct tty_port *tport;
 
 	tport = isicom_find_port(tty);

@@ -1118,8 +1116,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
 	if (copy_from_user(&newinfo, info, sizeof(newinfo)))
 		return -EFAULT;
 
-	lock_kernel();
-
+	mutex_lock(&port->port.mutex);
 	reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
 		(newinfo.flags & ASYNC_SPD_MASK));
 

@@ -1128,7 +1125,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
 				(newinfo.closing_wait != port->port.closing_wait) ||
 				((newinfo.flags & ~ASYNC_USR_MASK) !=
 				(port->port.flags & ~ASYNC_USR_MASK))) {
-			unlock_kernel();
+			mutex_unlock(&port->port.mutex);
 			return -EPERM;
 		}
 		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |

@@ -1145,7 +1142,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
 		isicom_config_port(tty);
 		spin_unlock_irqrestore(&port->card->card_lock, flags);
 	}
-	unlock_kernel();
+	mutex_unlock(&port->port.mutex);
 	return 0;
 }
 

@@ -1154,7 +1151,7 @@ static int isicom_get_serial_info(struct isi_port *port,
 {
 	struct serial_struct out_info;
 
-	lock_kernel();
+	mutex_lock(&port->port.mutex);
 	memset(&out_info, 0, sizeof(out_info));
 /*	out_info.type = ? */
 	out_info.line = port - isi_ports;

@@ -1164,7 +1161,7 @@ static int isicom_get_serial_info(struct isi_port *port,
 /*	out_info.baud_base = ? */
 	out_info.close_delay = port->port.close_delay;
 	out_info.closing_wait = port->port.closing_wait;
-	unlock_kernel();
+	mutex_unlock(&port->port.mutex);
 	if (copy_to_user(info, &out_info, sizeof(out_info)))
 		return -EFAULT;
 	return 0;

index 0e29a23..79c3bc6 100644
@@ -73,7 +73,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>

@@ -1017,6 +1016,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
 	if (tty_port_close_start(port, tty, filp) == 0)
 		return;
 
+	mutex_lock(&port->mutex);
 	cp = &info->channel;
 	/*
 	 * Before we drop DTR, make sure the UART transmitter

@@ -1060,9 +1060,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
 			info->xmit_buf = NULL;
 		}
 	}
+	spin_lock_irq(&port->lock);
 	info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
 	tty->closing = 0;
+	spin_unlock_irq(&port->lock);
+	mutex_unlock(&port->mutex);
 	tty_port_tty_set(port, NULL);
+
 	wake_up_interruptible(&port->close_wait);
 	complete_all(&info->close_wait);
 	atomic_dec(&rp_num_ports_open);

@@ -1210,11 +1214,13 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
 	if (!retinfo)
 		return -EFAULT;
 	memset(&tmp, 0, sizeof (tmp));
+	mutex_lock(&info->port.mutex);
 	tmp.line = info->line;
 	tmp.flags = info->flags;
 	tmp.close_delay = info->port.close_delay;
 	tmp.closing_wait = info->port.closing_wait;
 	tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+	mutex_unlock(&info->port.mutex);
 
 	if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
 		return -EFAULT;

@@ -1229,10 +1235,13 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
 	if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
 		return -EFAULT;
 
+	mutex_lock(&info->port.mutex);
 	if (!capable(CAP_SYS_ADMIN))
 	{
-		if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
+		if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
+			mutex_unlock(&info->port.mutex);
 			return -EPERM;
+		}
 		info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
 		configure_r_port(tty, info, NULL);
 		return 0;

@@ -1250,6 +1259,7 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
 		tty->alt_speed = 230400;
 	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
 		tty->alt_speed = 460800;
+	mutex_unlock(&info->port.mutex);
 
 	configure_r_port(tty, info, NULL);
 	return 0;

@@ -1325,8 +1335,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
 	if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
 		return -ENXIO;
 
-	lock_kernel();
-
 	switch (cmd) {
 	case RCKP_GET_STRUCT:
 		if (copy_to_user(argp, info, sizeof (struct r_port)))

@@ -1350,7 +1358,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
 	default:
 		ret = -ENOIOCTLCMD;
 	}
-	unlock_kernel();
 	return ret;
 }
 

@@ -1471,7 +1478,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
 	       jiffies);
 	printk(KERN_INFO "cps=%d...\n", info->cps);
 #endif
-	lock_kernel();
 	while (1) {
 		txcnt = sGetTxCnt(cp);
 		if (!txcnt) {

@@ -1499,7 +1505,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
 			break;
 	}
 	__set_current_state(TASK_RUNNING);
-	unlock_kernel();
 #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
 	printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
 #endif

@@ -1512,6 +1517,7 @@ static void rp_hangup(struct tty_struct *tty)
 {
 	CHANNEL_t *cp;
 	struct r_port *info = tty->driver_data;
+	unsigned long flags;
 
 	if (rocket_paranoia_check(info, "rp_hangup"))
 		return;

@@ -1520,11 +1526,15 @@ static void rp_hangup(struct tty_struct *tty)
 	printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
 #endif
 	rp_flush_buffer(tty);
-	if (info->port.flags & ASYNC_CLOSING)
+	spin_lock_irqsave(&info->port.lock, flags);
+	if (info->port.flags & ASYNC_CLOSING) {
+		spin_unlock_irqrestore(&info->port.lock, flags);
 		return;
+	}
 	if (info->port.count)
 		atomic_dec(&rp_num_ports_open);
 	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	spin_unlock_irqrestore(&info->port.lock, flags);
 
 	tty_port_hangup(&info->port);
 

@@ -1535,7 +1545,7 @@ static void rp_hangup(struct tty_struct *tty)
 	sDisCTSFlowCtl(cp);
 	sDisTxSoftFlowCtl(cp);
 	sClrTxXOFF(cp);
-	info->port.flags &= ~ASYNC_INITIALIZED;
+	clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
 
 	wake_up_interruptible(&info->port.open_wait);
 }

index 0658fc5..2b03d4d 100644
@@ -81,7 +81,6 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>

@@ -2436,7 +2435,9 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *
 	if (!user_icount) {
 		memset(&info->icount, 0, sizeof(info->icount));
 	} else {
+		mutex_lock(&info->port.mutex);
 		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+		mutex_unlock(&info->port.mutex);
 		if (err)
 			return -EFAULT;
 	}

@@ -2461,7 +2462,9 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
 		printk("%s(%d):mgsl_get_params(%s)\n",
 			 __FILE__,__LINE__, info->device_name);
 			
+	mutex_lock(&info->port.mutex);
 	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+	mutex_unlock(&info->port.mutex);
 	if (err) {
 		if ( debug_level >= DEBUG_LEVEL_INFO )
 			printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",

@@ -2501,11 +2504,13 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
 		return -EFAULT;
 	}
 	
+	mutex_lock(&info->port.mutex);
 	spin_lock_irqsave(&info->irq_spinlock,flags);
 	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
 	
  	mgsl_change_params(info);
+	mutex_unlock(&info->port.mutex);
 	
 	return 0;
 	

@@ -2935,7 +2940,6 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct mgsl_struct * info = tty->driver_data;
-	int ret;
 	
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,

@@ -2950,10 +2954,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 		    return -EIO;
 	}
 
-	lock_kernel();
-	ret = mgsl_ioctl_common(info, cmd, arg);
-	unlock_kernel();
-	return ret;
+	return mgsl_ioctl_common(info, cmd, arg);
 }
 
 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)

@@ -3109,12 +3110,14 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
 
 	if (tty_port_close_start(&info->port, tty, filp) == 0)			 
 		goto cleanup;
-			
+
+	mutex_lock(&info->port.mutex);
  	if (info->port.flags & ASYNC_INITIALIZED)
  		mgsl_wait_until_sent(tty, info->timeout);
 	mgsl_flush_buffer(tty);
 	tty_ldisc_flush(tty);
 	shutdown(info);
+	mutex_unlock(&info->port.mutex);
 
 	tty_port_close_end(&info->port, tty);	
 	info->port.tty = NULL;

@@ -3162,7 +3165,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
 	 * Note: use tight timings here to satisfy the NIST-PCTS.
 	 */ 
 
-	lock_kernel();
 	if ( info->params.data_rate ) {
 	       	char_time = info->timeout/(32 * 5);
 		if (!char_time)

@@ -3192,7 +3194,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
 				break;
 		}
 	}
-	unlock_kernel();
       
 exit:
 	if (debug_level >= DEBUG_LEVEL_INFO)

123 lines not on this page · raw message

index 2b18adc..8da976b 100644
@@ -52,7 +52,6 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>

@@ -1062,9 +1061,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
 	if (sanity_check(info, tty->name, "wait_until_sent"))
 		return;
 
-	lock_kernel();
-
-	if (!(info->port.flags & ASYNC_INITIALIZED))
+	if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
 		goto exit;
 
 	orig_jiffies = jiffies;

@@ -1094,8 +1091,10 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
 				break;
 		}
 	} else {
-		//TODO: determine if there is something similar to USC16C32
-		// 	TXSTATUS_ALL_SENT status
+		/*
+		 * TODO: determine if there is something similar to USC16C32
+		 * 	 TXSTATUS_ALL_SENT status
+		 */
 		while ( info->tx_active && info->tx_enabled) {
 			msleep_interruptible(jiffies_to_msecs(char_time));
 			if (signal_pending(current))

@@ -1106,7 +1105,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
 	}
 
 exit:
-	unlock_kernel();
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s wait_until_sent() exit\n",
 			 __FILE__,__LINE__, info->device_name );

@@ -1122,7 +1120,6 @@ static int write_room(struct tty_struct *tty)
 	if (sanity_check(info, tty->name, "write_room"))
 		return 0;
 
-	lock_kernel();
 	if (info->params.mode == MGSL_MODE_HDLC) {
 		ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
 	} else {

@@ -1130,7 +1127,6 @@ static int write_room(struct tty_struct *tty)
 		if (ret < 0)
 			ret = 0;
 	}
-	unlock_kernel();
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s write_room()=%d\n",

@@ -1251,7 +1247,7 @@ static void tx_release(struct tty_struct *tty)
  *
  * Return Value:	0 if success, otherwise error code
  */
-static int do_ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
 	SLMP_INFO *info = tty->driver_data;

@@ -1341,16 +1337,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int ioctl(struct tty_struct *tty, struct file *file,
-		 unsigned int cmd, unsigned long arg)
-{
-	int ret;
-	lock_kernel();
-	ret = do_ioctl(tty, file, cmd, arg);
-	unlock_kernel();
-	return ret;
-}
-
 /*
  * /proc fs routines....
  */

@@ -2883,7 +2869,9 @@ static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
 	if (!user_icount) {
 		memset(&info->icount, 0, sizeof(info->icount));
 	} else {
+		mutex_lock(&info->port.mutex);
 		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+		mutex_unlock(&info->port.mutex);
 		if (err)
 			return -EFAULT;
 	}

@@ -2898,7 +2886,9 @@ static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
 		printk("%s(%d):%s get_params()\n",
 			 __FILE__,__LINE__, info->device_name);
 
+	mutex_lock(&info->port.mutex);
 	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+	mutex_unlock(&info->port.mutex);
 	if (err) {
 		if ( debug_level >= DEBUG_LEVEL_INFO )
 			printk( "%s(%d):%s get_params() user buffer copy failed\n",

@@ -2926,11 +2916,13 @@ static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
 		return -EFAULT;
 	}
 
+	mutex_lock(&info->port.mutex);
 	spin_lock_irqsave(&info->lock,flags);
 	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
 	spin_unlock_irqrestore(&info->lock,flags);
 
  	change_params(info);
+	mutex_unlock(&info->port.mutex);
 
 	return 0;
 }

index 9824b41..51acfe3 100644
@@ -65,7 +65,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>

@@ -1655,7 +1654,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 		return;		/* Just in case.... */
 
 	orig_jiffies = jiffies;
-	lock_kernel();
 	/*
 	 * Set the check interval to be 1/5 of the estimated time to
 	 * send a single character, and make it at least 1.  The check

@@ -1702,7 +1700,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 	}
 	/* Run one more char cycle */
 	msleep_interruptible(jiffies_to_msecs(char_time * 5));
-	unlock_kernel();
 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
 	printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
 #endif

@@ -1959,7 +1956,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		int char_count;
 		__u32 tx_put, tx_get, tx_bufsize;
 
-		lock_kernel();
 		tx_get = readl(&buf_ctrl->tx_get);
 		tx_put = readl(&buf_ctrl->tx_put);
 		tx_bufsize = readl(&buf_ctrl->tx_bufsize);

@@ -1971,7 +1967,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
 			info->line, info->xmit_cnt + char_count);
 #endif
-		unlock_kernel();
 		return info->xmit_cnt + char_count;
 	}
 #endif				/* Z_EXT_CHARS_IN_BUFFER */

@@ -2359,17 +2354,22 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
+	int ret;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
 
+	mutex_lock(&info->port.mutex);
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
 				new_serial.baud_base != info->baud ||
 				(new_serial.flags & ASYNC_FLAGS &
 					~ASYNC_USR_MASK) !=
 				(info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+		{
+			mutex_unlock(&info->port.mutex);
 			return -EPERM;
+		}
 		info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
 				(new_serial.flags & ASYNC_USR_MASK);
 		info->baud = new_serial.baud_base;

@@ -2392,10 +2392,12 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
 		cy_set_line_char(info, tty);
-		return 0;
+		ret = 0;
 	} else {
-		return cy_startup(info, tty);
+		ret = cy_startup(info, tty);
 	}
+	mutex_unlock(&info->port.mutex);
+	return ret;
 }				/* set_serial_info */
 
 /*

@@ -2438,7 +2440,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 
 	card = info->card;
 
-	lock_kernel();
 	if (!cy_is_Z(card)) {
 		unsigned long flags;
 		int channel = info->line - card->first_line;

@@ -2478,7 +2479,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
 	}
 end:
-	unlock_kernel();
 	return result;
 }				/* cy_tiomget */
 

@@ -2696,7 +2696,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
 		info->line, cmd, arg);
 #endif
-	lock_kernel();
 
 	switch (cmd) {
 	case CYGETMON:

@@ -2817,7 +2816,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
-	unlock_kernel();
 
 #ifdef CY_DEBUG_OTHER
 	printk(KERN_DEBUG "cyc:cy_ioctl done\n");

index 6f5ffe1..d9df46a 100644
@@ -36,7 +36,7 @@
 #include <linux/ctype.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
+#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>

@@ -2105,7 +2105,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 		break;
 	case DIGI_SETAW:
 	case DIGI_SETAF:
-		lock_kernel();
 		if (cmd == DIGI_SETAW) {
 			/* Setup an event to indicate when the transmit
 			   buffer empties */

@@ -2118,7 +2117,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 			if (tty->ldisc->ops->flush_buffer)
 				tty->ldisc->ops->flush_buffer(tty);
 		}
-		unlock_kernel();
 		/* Fall Thru */
 	case DIGI_SETA:
 		if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))

index 2c24fcd..7be456f 100644
@@ -1863,8 +1863,7 @@ static int sx_set_serial_info(struct specialix_port *port,
 		return -EFAULT;
 	}
 
-	lock_kernel();
-
+	mutex_lock(&port->port.mutex);
 	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
 			(tmp.flags & ASYNC_SPD_MASK));
 	change_speed |= (tmp.custom_divisor != port->custom_divisor);

@@ -1875,7 +1874,7 @@ static int sx_set_serial_info(struct specialix_port *port,
 		    ((tmp.flags & ~ASYNC_USR_MASK) !=
 		     (port->port.flags & ~ASYNC_USR_MASK))) {
 			func_exit();
-			unlock_kernel();
+			mutex_unlock(&port->port.mutex);
 			return -EPERM;
 		}
 		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |

@@ -1892,7 +1891,7 @@ static int sx_set_serial_info(struct specialix_port *port,
 		sx_change_speed(bp, port);
 
 	func_exit();
-	unlock_kernel();
+	mutex_unlock(&port->port.mutex);
 	return 0;
 }
 

@@ -1906,7 +1905,7 @@ static int sx_get_serial_info(struct specialix_port *port,
 	func_enter();
 
 	memset(&tmp, 0, sizeof(tmp));
-	lock_kernel();
+	mutex_lock(&port->port.mutex);
 	tmp.type = PORT_CIRRUS;
 	tmp.line = port - sx_port;
 	tmp.port = bp->base;

@@ -1917,7 +1916,7 @@ static int sx_get_serial_info(struct specialix_port *port,
 	tmp.closing_wait = port->port.closing_wait * HZ/100;
 	tmp.custom_divisor =  port->custom_divisor;
 	tmp.xmit_fifo_size = CD186x_NFIFO;
-	unlock_kernel();
+	mutex_unlock(&port->port.mutex);
 	if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
 		func_exit();
 		return -EFAULT;

index fd35f73..b92070c 100644
@@ -609,8 +609,10 @@ static void digi_wakeup_write_lock(struct work_struct *work)
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	tty_wakeup(tty);
-	tty_kref_put(tty);
+	if (tty) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 

@@ -1682,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		priv->dp_throttle_restart = 1;
 
 	/* receive data */
-	if (opcode == DIGI_CMD_RECEIVE_DATA) {
+	if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
 		/* get flag from port_status */
 		flag = 0;
 

@@ -1763,10 +1765,12 @@ static int digi_read_oob_callback(struct urb *urb)
 			return -1;
 
 		tty = tty_port_tty_get(&port->port);
+
 		rts = 0;
-		rts = tty->termios->c_cflag & CRTSCTS;
+		if (tty)
+			rts = tty->termios->c_cflag & CRTSCTS;
 		
-		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {

index 3c7ac6a..5a602eb 100644
@@ -675,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp)
 		goto cleanup;
 	}
 
+	mutex_lock(&info->port.mutex);
 	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
 		retval = -EBUSY;
 		spin_unlock_irqrestore(&info->netlock, flags);
+		mutex_unlock(&info->port.mutex);
 		goto cleanup;
 	}
 	info->port.count++;

@@ -692,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp)
 		if (retval < 0)
 			goto cleanup;
 	}
-
+	mutex_unlock(&info->port.mutex);
 	retval = block_til_ready(tty, filp, info);
 	if (retval) {
 		DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));

@@ -724,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp)
 	if (tty_port_close_start(&info->port, tty, filp) == 0)
 		goto cleanup;
 
+	mutex_lock(&info->port.mutex);
  	if (info->port.flags & ASYNC_INITIALIZED)
  		wait_until_sent(tty, info->timeout);
 	flush_buffer(tty);
 	tty_ldisc_flush(tty);
 
 	shutdown(info);
+	mutex_unlock(&info->port.mutex);
 
 	tty_port_close_end(&info->port, tty);
 	info->port.tty = NULL;

@@ -740,17 +744,23 @@ cleanup:
 static void hangup(struct tty_struct *tty)
 {
 	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
 
 	if (sanity_check(info, tty->name, "hangup"))
 		return;
 	DBGINFO(("%s hangup\n", info->device_name));
 
 	flush_buffer(tty);
+
+	mutex_lock(&info->port.mutex);
 	shutdown(info);
 
+	spin_lock_irqsave(&info->port.lock, flags);
 	info->port.count = 0;
 	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->port.tty = NULL;
+	spin_unlock_irqrestore(&info->port.lock, flags);
+	mutex_unlock(&info->port.mutex);
 
 	wake_up_interruptible(&info->port.open_wait);
 }

index 8da976b..ac447c7 100644
@@ -812,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp)
 
 	if (tty_port_close_start(&info->port, tty, filp) == 0)
 		goto cleanup;
-		
+
+	mutex_lock(&info->port.mutex);
  	if (info->port.flags & ASYNC_INITIALIZED)
  		wait_until_sent(tty, info->timeout);
 
 	flush_buffer(tty);
 	tty_ldisc_flush(tty);
 	shutdown(info);
+	mutex_unlock(&info->port.mutex);
 
 	tty_port_close_end(&info->port, tty);
 	info->port.tty = NULL;

@@ -834,6 +836,7 @@ cleanup:
 static void hangup(struct tty_struct *tty)
 {
 	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s hangup()\n",

@@ -842,12 +845,16 @@ static void hangup(struct tty_struct *tty)
 	if (sanity_check(info, tty->name, "hangup"))
 		return;
 
+	mutex_lock(&info->port.mutex);
 	flush_buffer(tty);
 	shutdown(info);
 
+	spin_lock_irqsave(&info->port.lock, flags);
 	info->port.count = 0;
 	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->port.tty = NULL;
+	spin_unlock_irqrestore(&info->port.lock, flags);
+	mutex_unlock(&info->port.mutex);
 
 	wake_up_interruptible(&info->port.open_wait);
 }

index 7f28307..12ee7e0 100644
@@ -58,7 +58,7 @@ static struct lock_class_key port_lock_key;
 #define uart_console(port)	(0)
 #endif
 
-static void uart_change_speed(struct uart_state *state,
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
 					struct ktermios *old_termios);
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
 static void uart_change_pm(struct uart_state *state, int pm_state);

@@ -137,7 +137,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
  * Startup the port.  This will be called once per open.  All calls
  * will be serialised by the per-port mutex.
  */
-static int uart_startup(struct uart_state *state, int init_hw)
+static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw)
 {
 	struct uart_port *uport = state->uart_port;
 	struct tty_port *port = &state->port;

@@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	 * once we have successfully opened the port.  Also set
 	 * up the tty->alt_speed kludge
 	 */
-	set_bit(TTY_IO_ERROR, &port->tty->flags);
+	set_bit(TTY_IO_ERROR, &tty->flags);
 
 	if (uport->type == PORT_UNKNOWN)
 		return 0;

@@ -177,26 +177,26 @@ static int uart_startup(struct uart_state *state, int init_hw)
 			/*
 			 * Initialise the hardware port settings.
 			 */
-			uart_change_speed(state, NULL);
+			uart_change_speed(tty, state, NULL);
 
 			/*
 			 * Setup the RTS and DTR signals once the
 			 * port is open and ready to respond.
 			 */
-			if (port->tty->termios->c_cflag & CBAUD)
+			if (tty->termios->c_cflag & CBAUD)
 				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
 		if (port->flags & ASYNC_CTS_FLOW) {
 			spin_lock_irq(&uport->lock);
 			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
-				port->tty->hw_stopped = 1;
+				tty->hw_stopped = 1;
 			spin_unlock_irq(&uport->lock);
 		}
 
 		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		clear_bit(TTY_IO_ERROR, &port->tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 
 	if (retval && capable(CAP_SYS_ADMIN))

@@ -210,11 +210,10 @@ static int uart_startup(struct uart_state *state, int init_hw)
  * DTR is dropped if the hangup on close termio flag is on.  Calls to
  * uart_shutdown are serialised by the per-port semaphore.
  */
-static void uart_shutdown(struct uart_state *state)
+static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 {
 	struct uart_port *uport = state->uart_port;
 	struct tty_port *port = &state->port;
-	struct tty_struct *tty = port->tty;
 
 	/*
 	 * Set the TTY IO error marker

@@ -430,11 +429,10 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
 EXPORT_SYMBOL(uart_get_divisor);
 
 /* FIXME: Consistent locking policy */
-static void
-uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
+					struct ktermios *old_termios)
 {
 	struct tty_port *port = &state->port;
-	struct tty_struct *tty = port->tty;
 	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 

@@ -463,8 +461,8 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 	uport->ops->set_termios(uport, termios, old_termios);
 }
 
-static inline int
-__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
+static inline int __uart_put_char(struct uart_port *port,
+				struct circ_buf *circ, unsigned char c)
 {
 	unsigned long flags;
 	int ret = 0;

@@ -494,8 +492,8 @@ static void uart_flush_chars(struct tty_struct *tty)
 	uart_start(tty);
 }
 
-static int
-uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int uart_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port;

@@ -675,7 +673,7 @@ static int uart_get_info(struct uart_state *state,
 	return 0;
 }
 
-static int uart_set_info(struct uart_state *state,
+static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
 			 struct serial_struct __user *newinfo)
 {
 	struct serial_struct new_serial;

@@ -770,7 +768,7 @@ static int uart_set_info(struct uart_state *state,
 		 * We need to shutdown the serial port at the old
 		 * port/type/irq combination.
 		 */
-		uart_shutdown(state);
+		uart_shutdown(tty, state);
 	}
 
 	if (change_port) {

@@ -869,25 +867,27 @@ static int uart_set_info(struct uart_state *state,
 				       "is deprecated.\n", current->comm,
 				       tty_name(port->tty, buf));
 			}
-			uart_change_speed(state, NULL);
+			uart_change_speed(tty, state, NULL);
 		}
 	} else
-		retval = uart_startup(state, 1);
+		retval = uart_startup(tty, state, 1);
  exit:
 	mutex_unlock(&port->mutex);
 	return retval;
 }
 
-
-/*
- * uart_get_lsr_info - get line status register info.
- * Note: uart_ioctl protects us against hangups.
+/**
+ *	uart_get_lsr_info	-	get line status register info
+ *	@tty: tty associated with the UART
+ *	@state: UART being queried
+ *	@value: returned modem value
+ *
+ *	Note: uart_ioctl protects us against hangups.
  */
-static int uart_get_lsr_info(struct uart_state *state,
-			     unsigned int __user *value)
+static int uart_get_lsr_info(struct tty_struct *tty,
+			struct uart_state *state, unsigned int __user *value)
 {
 	struct uart_port *uport = state->uart_port;
-	struct tty_port *port = &state->port;
 	unsigned int result;
 
 	result = uport->ops->tx_empty(uport);

@@ -900,7 +900,7 @@ static int uart_get_lsr_info(struct uart_state *state,
 	 */
 	if (uport->x_char ||
 	    ((uart_circ_chars_pending(&state->xmit) > 0) &&
-	     !port->tty->stopped && !port->tty->hw_stopped))
+	     !tty->stopped && !tty->hw_stopped))
 		result &= ~TIOCSER_TEMT;
 
 	return put_user(result, value);

@@ -961,7 +961,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
-static int uart_do_autoconfig(struct uart_state *state)
+static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state)
 {
 	struct uart_port *uport = state->uart_port;
 	struct tty_port *port = &state->port;

@@ -980,7 +980,7 @@ static int uart_do_autoconfig(struct uart_state *state)
 
 	ret = -EBUSY;
 	if (tty_port_users(port) == 1) {
-		uart_shutdown(state);
+		uart_shutdown(tty, state);
 
 		/*
 		 * If we already have a port type configured,

@@ -999,7 +999,7 @@ static int uart_do_autoconfig(struct uart_state *state)
 		 */
 		uport->ops->config_port(uport, flags);
 
-		ret = uart_startup(state, 1);
+		ret = uart_startup(tty, state, 1);
 	}
 	mutex_unlock(&port->mutex);
 	return ret;

@@ -1122,11 +1122,11 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 		break;
 
 	case TIOCSSERIAL:
-		ret = uart_set_info(state, uarg);
+		ret = uart_set_info(tty, state, uarg);
 		break;
 
 	case TIOCSERCONFIG:
-		ret = uart_do_autoconfig(state);
+		ret = uart_do_autoconfig(tty, state);
 		break;
 
 	case TIOCSERGWILD: /* obsolete */

@@ -1172,7 +1172,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 	 */
 	switch (cmd) {
 	case TIOCSERGETLSR: /* Get line status register */
-		ret = uart_get_lsr_info(state, uarg);
+		ret = uart_get_lsr_info(tty, state, uarg);
 		break;
 
 	default: {

@@ -1219,7 +1219,7 @@ static void uart_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	uart_change_speed(state, old_termios);
+	uart_change_speed(tty, state, old_termios);
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))

@@ -1335,7 +1335,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 		uart_wait_until_sent(tty, uport->timeout);
 	}
 
-	uart_shutdown(state);
+	uart_shutdown(tty, state);
 	uart_flush_buffer(tty);
 
 	tty_ldisc_flush(tty);

@@ -1436,7 +1436,7 @@ static void uart_hangup(struct tty_struct *tty)
 	mutex_lock(&port->mutex);
 	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
-		uart_shutdown(state);
+		uart_shutdown(tty, state);
 		port->count = 0;
 		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		tty_port_tty_set(port, NULL);

@@ -1446,15 +1446,19 @@ static void uart_hangup(struct tty_struct *tty)
 	mutex_unlock(&port->mutex);
 }
 
-/*
- * Copy across the serial console cflag setting into the termios settings
- * for the initial open of the port.  This allows continuity between the
- * kernel settings, and the settings init adopts when it opens the port
- * for the first time.
+/**
+ *	uart_update_termios	-	update the terminal hw settings
+ *	@tty: tty associated with UART
+ *	@state: UART to update
+ *
+ *	Copy across the serial console cflag setting into the termios settings
+ *	for the initial open of the port.  This allows continuity between the
+ *	kernel settings, and the settings init adopts when it opens the port
+ *	for the first time.
  */
-static void uart_update_termios(struct uart_state *state)
+static void uart_update_termios(struct tty_struct *tty,
+						struct uart_state *state)
 {
-	struct tty_struct *tty = state->port.tty;
 	struct uart_port *port = state->uart_port;
 
 	if (uart_console(port) && port->cons->cflag) {

@@ -1471,7 +1475,7 @@ static void uart_update_termios(struct uart_state *state)
 		/*
 		 * Make termios settings take effect.
 		 */
-		uart_change_speed(state, NULL);
+		uart_change_speed(tty, state, NULL);
 
 		/*
 		 * And finally enable the RTS and DTR signals.

@@ -1668,7 +1672,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Start up the serial port.
 	 */
-	retval = uart_startup(state, 0);
+	retval = uart_startup(tty, state, 0);
 
 	/*
 	 * If we succeeded, wait until the port is ready.

@@ -1683,7 +1687,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
 		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
-		uart_update_termios(state);
+		uart_update_termios(tty, state);
 	}
 
 fail:

@@ -2010,9 +2014,13 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 	struct tty_port *port = &state->port;
 	struct device *tty_dev;
 	struct uart_match match = {uport, drv};
+	struct tty_struct *tty;
 
 	mutex_lock(&port->mutex);
 
+	/* Must be inside the mutex lock until we convert to tty_port */
+	tty = port->tty;
+
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
 		enable_irq_wake(uport->irq);

@@ -2105,9 +2113,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		ops->set_mctrl(uport, 0);
 		spin_unlock_irq(&uport->lock);
 		if (console_suspend_enabled || !uart_console(uport)) {
+			/* Protected by port mutex for now */
+			struct tty_struct *tty = port->tty;
 			ret = ops->startup(uport);
 			if (ret == 0) {
-				uart_change_speed(state, NULL);
+				if (tty)
+					uart_change_speed(tty, state, NULL);
 				spin_lock_irq(&uport->lock);
 				ops->set_mctrl(uport, uport->mctrl);
 				ops->start_tx(uport);

@@ -2119,7 +2130,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 				 * Clear the "initialized" flag so we won't try
 				 * to call the low level drivers shutdown method.
 				 */
-				uart_shutdown(state);
+				uart_shutdown(tty, state);
 			}
 		}
 

index 8681f13..d89aa38 100644
@@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
 {
 	unsigned long flags;
-	unsigned int baud, quot, h_lcr;
+	unsigned int baud, quot, h_lcr, b;
 
 	/*
 	 * We don't support modem control lines.

@@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
-
-	if (port->state && port->state->port.tty) {
-		struct tty_struct *tty = port->state->port.tty;
-		unsigned int b = port->uartclk / (16 * quot);
-		tty_encode_baud_rate(tty, b, b);
-	}
+	b = port->uartclk / (16 * quot);
+	tty_termios_encode_baud_rate(termios, b, b);
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:

index eacb588..66ecc7a 100644
@@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	if (port->state && port->state->port.tty) {
-		tdiv64 = sport->port.uartclk;
-		tdiv64 *= num;
-		do_div(tdiv64, denom * 16 * div);
-		tty_encode_baud_rate(sport->port.state->port.tty,
+	tdiv64 = sport->port.uartclk;
+	tdiv64 *= num;
+	do_div(tdiv64, denom * 16 * div);
+	tty_termios_encode_baud_rate(termios,
 				(speed_t)tdiv64, (speed_t)tdiv64);
-	}
 
 	num -= 1;
 	denom -= 1;

index f164ba4..93de907 100644
@@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port,
 		  struct ktermios *new_termios, struct ktermios *old_termios)
 {
 	struct ioc3_port *port = get_ioc3_port(the_port);
-	unsigned int cflag;
+	unsigned int cflag, iflag;
 	int baud;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
 	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
+	iflag = new_termios->c_iflag;
 
 	switch (cflag & CSIZE) {
 	case CS5:

@@ -1000,12 +1001,12 @@ ioc3_change_speed(struct uart_port *the_port,
 
 	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(state->port.tty))
+	if (iflag & IGNPAR)
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						  | N_FRAMING_ERROR);
-	if (I_IGNBRK(state->port.tty)) {
+	if (iflag & IGNBRK) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(state->port.tty))
+		if (iflag & IGNPAR)
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {

index 8ad28fc..fcfe826 100644
@@ -1685,11 +1685,12 @@ ioc4_change_speed(struct uart_port *the_port,
 {
 	struct ioc4_port *port = get_ioc4_port(the_port, 0);
 	int baud, bits;
-	unsigned cflag;
+	unsigned cflag, iflag;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
 	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
+	iflag = new_termios->c_iflag;
 
 	switch (cflag & CSIZE) {
 	case CS5:

@@ -1741,12 +1742,12 @@ ioc4_change_speed(struct uart_port *the_port,
 
 	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(state->port.tty))
+	if (iflag & IGNPAR)
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						| N_FRAMING_ERROR);
-	if (I_IGNBRK(state->port.tty)) {
+	if (iflag & IGNBRK) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(state->port.tty))
+		if (iflag & IGNPAR)
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {

index 3351c3b..beb1afa 100644
@@ -430,17 +430,14 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 	int baud = 0;
 	unsigned cflag;
 	u32 param_new, param_mask, parity = 0;
-	struct tty_struct *tty = s->port.state->port.tty;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
-	if (!tty)
-		return;
 
 	cflag = termios->c_cflag;
 	param_new = 0;
 	param_mask = 0;
 
-	baud = tty_get_baud_rate(tty);
+	baud = tty_termios_baud_rate(termios);
 	param_new = s->conf & MAX3100_BAUD;
 	switch (baud) {
 	case 300:

@@ -485,7 +482,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 	default:
 		baud = s->baud;
 	}
-	tty_encode_baud_rate(tty, baud, baud);
+	tty_termios_encode_baud_rate(termios, baud, baud);
 	s->baud = baud;
 	param_mask |= MAX3100_BAUD;