RTC: LPC32xx: Introduce RTC driver for the LPC32xx (v3)
Subsystems (2)
This patch set adds support for the LPC32xx built-in RTC. This is a persistent RTC with alarm on it's own power domain and a dedicated oscillator. UIE emulation is used for *_UIE_* ioctls.
The patch can be pulled from:
git://git.lpclinux.com/linux-2.6-lpc rtc-lpc32xx_v3
v3 includes updates from the initial review of the RTC driver and updates from v2. ...Fingers crossed...
Changes since v2:
RTC register macros now prefixed with LPC32XX_ Changed alarm_enable type to unsigned char to match
the type in the struct rtc_wkalrm (enable)
Set pending flag to correct state in read-alarm
function
Change the alarm read failure message to a warning Regardless of the state of the alarm enable flag
passed into set_alarm, the alarm fire value is updated. Previously, this was only updated when the alarm enable flag was set
Added braces for else clauses with a single statement
if the previous if clause had them
Cleared platform data pointer in rtc structure on
error and remove
Changes since v1:
Fixed spaces/tabbing in lpc32xx entry in Kconfig/Makefile Remove improper enable for rtc->alarm_enabled Removed typecast on rtc structure in irq handler Switch to resource managed (devm_) variants of kzalloc
and other functions in probe. Updated remove based on these changes.
Disabled alarm on probe instead of keeping current register
settings. No changes for suspend.
Allowed driver to continue operation without wakeup or
alarm irq if the rtc irq request failed.
Relocated module_init and _exit macros to just after it's
associated function
Passed a NULL pointer to .driver.pm in platform driver
structure instead of a list of NULL functions.
Added MODULE_ALIAS
PATCH 1/1 rtc: rtc-lpc32xx: Introduce RTC driver for the LPC32XX SoC (v3)
From: Kevin Wells <[email protected]>
This patch contains the RTC driver for the built-in RTC in the LPC32XX SoC. This patch includes updates from the initial review comments and updates from the v2 review.
--- drivers/rtc/Kconfig | 9 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-lpc32xx.c | 410 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 420 insertions(+), 0 deletions(-) create mode 100644 drivers/rtc/rtc-lpc32xx.c
drivers/rtc/Kconfig +9 -0
@@ -952,4 +952,13 @@ config RTC_DRV_JZ4740 This driver can also be buillt as a module. If so, the module will be called rtc-jz4740. +config RTC_DRV_LPC32XX + depends on ARCH_LPC32XX + tristate "NXP LPC32XX RTC" + help + This enables support for the NXP RTC in the LPC32XX + + This driver can also be buillt as a module. If so, the module + will be called rtc-lpc32xx. + endif # RTC_CLASS
drivers/rtc/Makefile +1 -0
@@ -51,6 +51,7 @@ obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o obj-$(CONFIG_RTC_DRV_JZ4740) += rtc-jz4740.o +obj-$(CONFIG_RTC_DRV_LPC32XX) += rtc-lpc32xx.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
drivers/rtc/rtc-lpc32xx.c new file +410 -0
410 lines not on this page · raw message
Signature · 1 line
1.7.1.1
Re: [rtc-linux] [PATCH] rtc: rtc-lpc32xx: Introduce RTC driver for the LPC32XX SoC (v3)
Kevin,
Quoted 8 lines · On Thu, Aug 12, 2010 at 02:57:24PM -0700, wellsk40 at gmail.com wrote:
From: Kevin Wells <[email protected]>
This patch contains the RTC driver for the built-in RTC in the LPC32XX SoC. This patch includes updates from the initial review comments and updates from the v2 review.
Signed-off-by Kevin Wells <[email protected]>Signed-off-by Durgesh Pattamatta <[email protected]>
I used this driver with hardware now. One major problem when rebooting, see below. I did not check alarm and PM (and will probably not have the time for that currently), maybe this should be carefully tested again as the rebooting-issue also has slipped through.
Rest is very minor stuff...
Quoted 74 lines
--- drivers/rtc/Kconfig | 9 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-lpc32xx.c | 410 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 420 insertions(+), 0 deletions(-) create mode 100644 drivers/rtc/rtc-lpc32xx.cdrivers/rtc/Kconfig +9
-0@@ -952,4 +952,13 @@ config RTC_DRV_JZ4740 This driver can also be buillt as a module. If so, the module will be called rtc-jz4740. +config RTC_DRV_LPC32XX + depends on ARCH_LPC32XX + tristate "NXP LPC32XX RTC" + help + This enables support for the NXP RTC in the LPC32XX + + This driver can also be buillt as a module. If so, the module + will be called rtc-lpc32xx. + endif # RTC_CLASSdrivers/rtc/Makefile +1
-0@@ -51,6 +51,7 @@ obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o obj-$(CONFIG_RTC_DRV_JZ4740) += rtc-jz4740.o +obj-$(CONFIG_RTC_DRV_LPC32XX) += rtc-lpc32xx.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.odrivers/rtc/rtc-lpc32xx.c new file +31
-0@@ -0,0 +1,410 @@ +/* +* Copyright (C) 2010 NXP Semiconductors +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/rtc.h> +#include <linux/slab.h> +#include <linux/io.h> + +/* +* Clock and Power control register offsets +*/ +#define LPC32XX_RTC_UCOUNT 0x00 +#define LPC32XX_RTC_DCOUNT 0x04 +#define LPC32XX_RTC_MATCH0 0x08 +#define LPC32XX_RTC_MATCH1 0x0C +#define LPC32XX_RTC_CTRL 0x10 +#define LPC32XX_RTC_INTSTAT 0x14
drivers/rtc/rtc-lpc32xx.c line 41
Quoted 10 lines
drivers/rtc/rtc-lpc32xx.c new file +10
-0+#define LPC32XX_RTC_KEY 0x18 +#define LPC32XX_RTC_SRAM 0x80 + +#define LPC32XX_RTC_MATCH0_EN (1 << 0) +#define LPC32XX_RTC_MATCH1_EN (1 << 1) +#define LPC32XX_RTC_ONSW_MATCH0_EN (1 << 2) +#define LPC32XX_RTC_ONSW_MATCH1_EN (1 << 3) +#define LPC32XX_RTC_SW_RESET (1 << 4) +#define LPC32XX_RTC_CNTR_DIS (1 << 6) +#define LPC32XX_RTC_ONSW_FORCE_HIGH (1 << 7)
I would have liked LPC32XX_RTC_CTRL_* as a prefix better as mentioned last time. It will do here for the RTC as it doesn't have much registers, though.
drivers/rtc/rtc-lpc32xx.c line 45
Quoted 4 lines
drivers/rtc/rtc-lpc32xx.c new file +4
-0+ +#define LPC32XX_RTC_MATCH0_INT_STS (1 << 0) +#define LPC32XX_RTC_MATCH1_INT_STS (1 << 1) +#define LPC32XX_RTC_ONSW_INT_STS (1 << 2)
ditto for including the register name.
Quoted 102 lines
drivers/rtc/rtc-lpc32xx.c new file +102
-0+ +#define LPC32XX_RTC_KEY_ONSW_LOADVAL 0xB5C13F27 + +#define RTC_NAME "rtc-lpc32xx" + +#define rtc_readl (dev, reg) \ + __raw_readl((dev)->rtc_base + (reg)) +#define rtc_writel (dev, reg, val) \ + __raw_writel((val), (dev)->rtc_base + (reg)) + +struct lpc32xx_rtc { +void __iomem *rtc_base; +int irq; +unsigned char alarm_enabled; +struct rtc_device *rtc; +spinlock_t lock; +}; + +static int lpc32xx_rtc_read_time (struct device *dev,struct rtc_time *time) +{ +unsigned long elapsed_sec; +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); + + elapsed_sec =rtc_readl (rtc,LPC32XX_RTC_UCOUNT ); +rtc_time_to_tm (elapsed_sec, time); + +return rtc_valid_tm (time); +} + +static int lpc32xx_rtc_set_mmss (struct device *dev,unsigned long secs) +{ +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); +u32 tmp; + +spin_lock_irq (&rtc->lock); + +/* RTC must be disabled during count update */ + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp |LPC32XX_RTC_CNTR_DIS ); +rtc_writel (rtc,LPC32XX_RTC_UCOUNT , secs); +rtc_writel (rtc,LPC32XX_RTC_DCOUNT ,0xFFFFFFFF - secs); +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp &= ~LPC32XX_RTC_CNTR_DIS ); + +spin_unlock_irq (&rtc->lock); + +return 0 ; +} + +static int lpc32xx_rtc_read_alarm (struct device *dev, +struct rtc_wkalrm *wkalrm) +{ +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); + +rtc_time_to_tm (rtc_readl (rtc,LPC32XX_RTC_MATCH0 ), &wkalrm->time); + wkalrm->enabled = rtc->alarm_enabled; + wkalrm->pending = !!(rtc_readl (rtc,LPC32XX_RTC_INTSTAT ) & +LPC32XX_RTC_MATCH0_INT_STS ); + +return rtc_valid_tm (&wkalrm->time); +} + +static int lpc32xx_rtc_set_alarm (struct device *dev, +struct rtc_wkalrm *wkalrm) +{ +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); +unsigned long alarmsecs; +u32 tmp; +int ret; + + ret =rtc_tm_to_time (&wkalrm->time, &alarmsecs); +if (ret <0 ) { +dev_warn (dev,"Failed to convert time: %d\n" , ret); +return ret; + } + +spin_lock_irq (&rtc->lock); + +/* Disable alarm during update */ + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp & ~LPC32XX_RTC_MATCH0_EN ); + +rtc_writel (rtc,LPC32XX_RTC_MATCH0 , alarmsecs); + + rtc->alarm_enabled = wkalrm->enabled; +if (wkalrm->enabled) { +rtc_writel (rtc,LPC32XX_RTC_INTSTAT , +LPC32XX_RTC_MATCH0_INT_STS ); +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp | +LPC32XX_RTC_MATCH0_EN ); + } + +spin_unlock_irq (&rtc->lock); + +return 0 ; +} + +static int lpc32xx_rtc_alarm_irq_enable (struct device *dev, +unsigned int enabled) +{ +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); +u32 tmp; +
drivers/rtc/rtc-lpc32xx.c line 157
Quoted 10 lines
drivers/rtc/rtc-lpc32xx.c new file +10
-0+spin_lock_irq (&rtc->lock); + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); + +if (enabled) { + rtc->alarm_enabled =1 ; + tmp |=LPC32XX_RTC_MATCH0_EN ; + }else { + rtc->alarm_enabled =0 ; + tmp &= ~LPC32XX_RTC_MATCH0_EN ; + }
Maybe 'rtc->alarm_enabled = enabled;' or similar could be used. Didn't check thouroughly.
Quoted 80 lines
drivers/rtc/rtc-lpc32xx.c new file +80
-0+ +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp); +spin_unlock_irq (&rtc->lock); + +return 0 ; +} + +static irqreturn_t lpc32xx_rtc_alarm_interrupt (int irq,void *dev) +{ +struct lpc32xx_rtc *rtc = dev; + +spin_lock (&rtc->lock); + +/* Disable alarm interrupt */ +rtc_writel (rtc,LPC32XX_RTC_CTRL , +rtc_readl (rtc,LPC32XX_RTC_CTRL ) & ~LPC32XX_RTC_MATCH0_EN ); + rtc->alarm_enabled =0 ; + +/* +* Write a large value to the match value so the RTC won't +* keep firing the match status +*/ +rtc_writel (rtc,LPC32XX_RTC_MATCH0 ,0xFFFFFFFF ); +rtc_writel (rtc,LPC32XX_RTC_INTSTAT ,LPC32XX_RTC_MATCH0_INT_STS ); + +spin_unlock (&rtc->lock); + +rtc_update_irq (rtc->rtc,1 ,RTC_IRQF |RTC_AF ); + +return IRQ_HANDLED ; +} + +static const struct rtc_class_ops lpc32xx_rtc_ops = { + .read_time = lpc32xx_rtc_read_time, + .set_mmss = lpc32xx_rtc_set_mmss, + .read_alarm = lpc32xx_rtc_read_alarm, + .set_alarm = lpc32xx_rtc_set_alarm, + .alarm_irq_enable = lpc32xx_rtc_alarm_irq_enable, +}; + +static int __devinit lpc32xx_rtc_probe (struct platform_device *pdev) +{ +struct resource *res; +struct lpc32xx_rtc *rtc; +resource_size_t size; +int rtcirq; +u32 tmp; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) { +dev_err (&pdev->dev,"Can't get memory resource\n" ); +return -ENOENT ; + } + + rtcirq =platform_get_irq (pdev,0 ); +if (rtcirq <0 || rtcirq >=NR_IRQS ) { +dev_warn (&pdev->dev,"Can't get interrupt resource\n" ); + rtcirq =-1 ; + } + + rtc =devm_kzalloc (&pdev->dev,sizeof (*rtc),GFP_KERNEL ); +if (unlikely (!rtc)) { +dev_err (&pdev->dev,"Can't allocate memory\n" ); +return -ENOMEM ; + } + rtc->irq = rtcirq; + + size =resource_size (res); + +if (!devm_request_mem_region (&pdev->dev, res->start, size, + pdev->name)) { +dev_err (&pdev->dev,"RTC registers are not free\n" ); +return -EBUSY ; + } + + rtc->rtc_base =devm_ioremap (&pdev->dev, res->start, size); +if (!rtc->rtc_base) { +dev_err (&pdev->dev,"Can't map memory\n" ); +return -ENOMEM ; + }
drivers/rtc/rtc-lpc32xx.c line 247
Quoted 10 lines
drivers/rtc/rtc-lpc32xx.c new file +10
-0+ +spin_lock_init (&rtc->lock); + +/* +* The RTC is on a seperate power domain and can keep it's state +* across a chip power cycle. If the RTC has never been previously +* setup, then set it up now for the first time. +*/ + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); +if (rtc_readl (rtc,LPC32XX_RTC_KEY ) ==LPC32XX_RTC_KEY_ONSW_LOADVAL ) {
This cannot work; it really should be '!=' otherwise the time will be reset at every reboot!
Quoted 165 lines
drivers/rtc/rtc-lpc32xx.c new file +163
-0+ tmp &= ~(LPC32XX_RTC_SW_RESET |LPC32XX_RTC_CNTR_DIS | +LPC32XX_RTC_MATCH0_EN |LPC32XX_RTC_MATCH1_EN | +LPC32XX_RTC_ONSW_MATCH0_EN | +LPC32XX_RTC_ONSW_MATCH1_EN | +LPC32XX_RTC_ONSW_FORCE_HIGH ); +rtc_writel (rtc,LPC32XX_RTC_CTRL , tmp); + +/* Clear latched interrupt states */ +rtc_writel (rtc,LPC32XX_RTC_MATCH0 ,0xFFFFFFFF ); +rtc_writel (rtc,LPC32XX_RTC_INTSTAT , +LPC32XX_RTC_MATCH0_INT_STS | +LPC32XX_RTC_MATCH1_INT_STS | +LPC32XX_RTC_ONSW_INT_STS ); + +/* Write key value to RTC so it won't reload on reset */ +rtc_writel (rtc,LPC32XX_RTC_KEY , +LPC32XX_RTC_KEY_ONSW_LOADVAL ); + }else { +rtc_writel (rtc,LPC32XX_RTC_CTRL , + tmp & ~LPC32XX_RTC_ONSW_MATCH0_EN ); + } + +platform_set_drvdata (pdev, rtc); + + rtc->rtc =rtc_device_register (RTC_NAME , &pdev->dev, &lpc32xx_rtc_ops, +THIS_MODULE ); +if (IS_ERR (rtc->rtc)) { +dev_err (&pdev->dev,"Can't get RTC\n" ); +platform_set_drvdata (pdev,NULL ); +return PTR_ERR (rtc->rtc); + } + +/* +* IRQ is enabled after device registration in case alarm IRQ +* is pending upon suspend exit. +*/ +if (rtc->irq >=0 ) { +if (devm_request_irq (&pdev->dev, rtc->irq, + lpc32xx_rtc_alarm_interrupt, +IRQF_DISABLED , pdev->name, rtc) <0 ) { +dev_warn (&pdev->dev,"Can't request interrupt.\n" ); + rtc->irq =-1 ; + }else { +device_init_wakeup (&pdev->dev,1 ); + } + } + +return 0 ; +} + +static int __devexit lpc32xx_rtc_remove(struct platform_device *pdev) +{ +struct lpc32xx_rtc *rtc =platform_get_drvdata (pdev); + +if (rtc->irq >=0 ) +device_init_wakeup (&pdev->dev,0 ); + +platform_set_drvdata (pdev,NULL ); +rtc_device_unregister (rtc->rtc); + +return 0 ; +} + +#ifdef CONFIG_PM +static int lpc32xx_rtc_suspend (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +struct lpc32xx_rtc *rtc =platform_get_drvdata (pdev); + +if (rtc->irq >=0 ) { +if (device_may_wakeup (&pdev->dev)) +enable_irq_wake (rtc->irq); +else +disable_irq_wake (rtc->irq); + } + +return 0 ; +} + +static int lpc32xx_rtc_resume (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +struct lpc32xx_rtc *rtc =platform_get_drvdata (pdev); + +if (rtc->irq >=0 &&device_may_wakeup (&pdev->dev)) +disable_irq_wake (rtc->irq); + +return 0 ; +} + +/* Unconditionally disable the alarm */ +static int lpc32xx_rtc_freeze (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +struct lpc32xx_rtc *rtc =platform_get_drvdata (pdev); + +spin_lock_irq (&rtc->lock); + +rtc_writel (rtc,LPC32XX_RTC_CTRL , +rtc_readl (rtc,LPC32XX_RTC_CTRL ) & ~LPC32XX_RTC_MATCH0_EN ); + +spin_unlock_irq (&rtc->lock); + +return 0 ; +} + +static int lpc32xx_rtc_thaw (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +struct lpc32xx_rtc *rtc =platform_get_drvdata (pdev); + +if (rtc->alarm_enabled) { +spin_lock_irq (&rtc->lock); + +rtc_writel (rtc,LPC32XX_RTC_CTRL , +rtc_readl (rtc,LPC32XX_RTC_CTRL ) | +LPC32XX_RTC_MATCH0_EN ); + +spin_unlock_irq (&rtc->lock); + } + +return 0 ; +} + +static const struct dev_pm_ops lpc32xx_rtc_pm_ops = { + .suspend = lpc32xx_rtc_suspend, + .resume = lpc32xx_rtc_resume, + .freeze = lpc32xx_rtc_freeze, + .thaw = lpc32xx_rtc_thaw, + .restore = lpc32xx_rtc_resume +}; + +#define LPC32XX_RTC_PM_OPS (&lpc32xx_rtc_pm_ops) +#else +#define LPC32XX_RTC_PM_OPS NULL +#endif + +static struct platform_driver lpc32xx_rtc_driver = { + .probe = lpc32xx_rtc_probe, + .remove =__devexit_p (lpc32xx_rtc_remove), + .driver = { + .name =RTC_NAME , + .owner =THIS_MODULE , + .pm =LPC32XX_RTC_PM_OPS + }, +}; + +static int __init lpc32xx_rtc_init (void ) +{ +return platform_driver_register (&lpc32xx_rtc_driver); +} +module_init (lpc32xx_rtc_init); + +static void __exit lpc32xx_rtc_exit(void) +{ +platform_driver_unregister (&lpc32xx_rtc_driver); +} +module_exit (lpc32xx_rtc_exit); + +MODULE_AUTHOR ("Kevin Wells <[email protected]" ); +MODULE_DESCRIPTION ("RTC driver for the LPC32xx SoC" ); +MODULE_LICENSE ("GPL" ); +MODULE_ALIAS ("platform:rtc-lpc32xx" );Signature · 1 line
1.7.1.1
Regards,
Wolfram
Signature · 9 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100813/c669bb0c/attachment-0001.sig>
RE: [rtc-linux] [PATCH] rtc: rtc-lpc32xx: Introduce RTC driver for the LPC32XX SoC (v3)
Hi Wolfram,
Thanks for continued testing and review of the driver.
Quoted 12 lines
drivers/rtc/rtc-lpc32xx.c line 41
Quoted 8 lines
drivers/rtc/rtc-lpc32xx.c new file +8
-0+ +#define LPC32XX_RTC_MATCH0_EN (1 << 0) +#define LPC32XX_RTC_MATCH1_EN (1 << 1) +#define LPC32XX_RTC_ONSW_MATCH0_EN (1 << 2) +#define LPC32XX_RTC_ONSW_MATCH1_EN (1 << 3) +#define LPC32XX_RTC_SW_RESET (1 << 4) +#define LPC32XX_RTC_CNTR_DIS (1 << 6) +#define LPC32XX_RTC_ONSW_FORCE_HIGH (1 << 7)I would have liked LPC32XX_RTC_CTRL_* as a prefix better as mentioned last time. It will do here for the RTC as it doesn't have much registers, though.
Quoted 7 lines
drivers/rtc/rtc-lpc32xx.c line 45
Quoted 4 lines
drivers/rtc/rtc-lpc32xx.c new file +4
-0+ +#define LPC32XX_RTC_MATCH0_INT_STS (1 << 0) +#define LPC32XX_RTC_MATCH1_INT_STS (1 << 1) +#define LPC32XX_RTC_ONSW_INT_STS (1 << 2)ditto for including the register name.
No problem here..I'll change these.
Quoted 11 lines
Quoted 11 lines
drivers/rtc/rtc-lpc32xx.c new file +11
-0+static int lpc32xx_rtc_alarm_irq_enable (struct device *dev, +unsigned int enabled) +{ +struct lpc32xx_rtc *rtc =dev_get_drvdata (dev); +u32 tmp; + +spin_lock_irq (&rtc->lock); + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); + +if (enabled) { + rtc->alarm_enabled =1 ;
Quoted 9 lines
drivers/rtc/rtc-lpc32xx.c line 157
Quoted 5 lines
drivers/rtc/rtc-lpc32xx.c new file +5
-0+ tmp |=LPC32XX_RTC_MATCH0_EN ; + }else { + rtc->alarm_enabled =0 ; + tmp &= ~LPC32XX_RTC_MATCH0_EN ; + }Maybe '
rtc->alarm_enabled= enabled;' or similar could be used. Didn't check thouroughly.
I picked this specific approach because the type in the local rtc structure is unsigned char (matching the struct rtc_wkalrm type) while the passed parameter 'enabled' is unsigned long. I considered these..
rtc->alarm_enabled = (unsigned char) enabled; and rtc->alarm_enabled = !!enabled;
The direct assignment seemed the best approach to avoid some type of cast or extra logic.
Quoted 12 lines
drivers/rtc/rtc-lpc32xx.c line 299
Quoted 8 lines
drivers/rtc/rtc-lpc32xx.c new file +8
-0+/* +* The RTC is on a seperate power domain and can keep it's state +* across a chip power cycle. If the RTC has never been previously +* setup, then set it up now for the first time. +*/ + tmp =rtc_readl (rtc,LPC32XX_RTC_CTRL ); +if (rtc_readl (rtc,LPC32XX_RTC_KEY ) ==LPC32XX_RTC_KEY_ONSW_LOADVAL ) +{This cannot work; it really should be '!=' otherwise the time will be reset at every reboot!
Hmm, this was a good find. If the key value isn't setup correctly, the boot ROM will clear the RTC counter on power-on reset. The time isn't being cleared on my board, so something is setting up the key elsewhere. Your suggested fix is probably the right fix, but I'll review. Sorry - I won't get updates for this available until next week.